summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-08-20iwlwifi: refactor packet reception codeDaniel C Halperin
This patch fixes a number of issues in iwl_rx_reply_rx and iwl_pass_packet_to_mac80211. These issues stem from the complexities of managing two different types of packet commands for different hardware. - Unify code handling rx_phy_res in SKB or cached to eliminate redundancy and remove potential NULL pointer accesses - Replace magic number with proper constant - Optimize functions by moving early exit conditions before computation - Comment code and improve some variable names - Remove redundant computation in iwl_pass_packet_to_mac80211 by passing in the correct, already-computed arguments. Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20iwlwifi: remove unused members of iwl_ht_infoJohannes Berg
Some members of iwl_ht_info are unused, and one of them is write-only, so we can remove these three: max_amsdu_size, ampdu_factor and mpdu_density. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20iwlwifi: traverse linklist to find the valid OTP blockWey-Yi Guy
For devices using OTP memory, EEPROM image can start from any one of the OTP blocks. If shadow RAM is disabled, we need to traverse link list to find the last valid block, then start the EEPROM image reading. If OTP is not full, the valid block is the block _before_ the last block on the link list; the last block on the link list is the empty block ready for next OTP refresh/update. If OTP is full, then the last block is the valid block to be used for configure the device. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20iwlwifi: cleanup HT40 extension channels setupZhu Yi
The patch cleans up the HT40 extension channels setup for EEPROM band 6 and 7 to make it more readable. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20iwlwifi: include HT configuration when adding stations through rs_rate_initDaniel C Halperin
Driver's first notification of a new station from mac80211 can be through rate selection API. This patch fixes a bug where, in this code path, the HT capabilities of the new station were ignored. Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20iwlwifi: remove unused HT configuration entry tx_chan_widthDaniel C Halperin
The tx_chan_width entry is never used, supported_chan_width is used instead. Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20iwlwifi: prevent read outside array boundsReinette Chatre
With EDCA and HCCA we have 16 potential tid values. This is accommodated by mac80211, but iwlwifi only supports EDCA. With this implementation it is thus possible for mac80211 to request a tid that will cause iwlwifi to read outside array bounds. A similar problem exists if traffic is received in an unsupported category. We add error checking to catch these situations. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20cfg80211: export cfg80211_wext_siwfreqJussi Kivilinna
cfg80211_wext_siwfreq() should be exported with EXPORT_SYMBOL_GPL. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Initialize TX power controlGábor Stefanik
The HW TX power control init still needs work. The SW init is complete according to the specs. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: Update dummy transmission to match V4 specsGábor Stefanik
The V4 dummy transmission has two extra bools in its prototype, so update all callers with the 2 bools. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14can: Use WARN_ONCE() instead of BUG_ON() for sanity check in receive pathOliver Hartkopp
To ensure a proper handling of CAN frames transported in skbuffs some checks need to be performed at receive time. As stated by Michael Olbrich and Luotao Fu BUG_ON() might be to restrictive. This is right as we can just drop the non conform skbuff and the Kernel can continue working. This patch replaces the BUG_ON() with a WARN_ONCE() so that the system remains healthy but we made the problem visible (once). Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: Urs Thuermann <urs@isnogud.escape.de> CC: Michael Olbrich <m.olbrich@pengutronix.de> CC: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: remove restarting workaround flagStephen Hemminger
The whole restarting flag was introduced by Mike McCormack and was a temporary duct tape patch around issues with transmits inflight during restart. The problems it was covering are now fixed and the code should have been reverted. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14ixgbe: Add support for NETIF_F_FCOE_MTU to 82599 devicesYi Zou
Enable netdev feature flag bit NETIF_F_FCOE_MTU for 82599 devices and enable jumbo frame correspondingly when NETIF_F_FCOE_MTU is set. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14net: Add NETIF_F_FCOE_MTU to indicate support for a different MTU for FCoEYi Zou
Add NETIF_F_FCOE_MTU to indicate that the NIC can support a secondary MTU for converged traffic of LAN and Fiber Channel over Ethernet (FCoE). The MTU for FCoE is 2158 = 14 (FCoE header) + 24 (FC header) + 2112 (FC max payload) + 4 (FC CRC) + 4 (FCoE trailer). Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14ixgbe: updates vlan feature flags to enable FCoE offloads on vlan interfaceVasu Dev
Updates netdev->vlan_features for NETIF_F_FCOE_CRC and NETIF_F_FSO, so that FCoE CRC and GSO offloads will get used for FCoE over ixgbe based vlan interface. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14vlan: adds fcoe offload related net_device_ops and updates fcoe_ddp_xid fieldVasu Dev
Adds fcoe offload related net_device_ops functions vlan_dev_fcoe_ddp_setup and vlan_dev_fcoe_ddp_done, their implementation simply calls real eth device net_device_ops for FCoE DDP setup and done operations. Updates VLAN netdev field value for fcoe_ddp_xid from real eth device netdev. Above changes are required for fcoe DDP offload working on a VLAN interface. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-08-14sky2: version 1.24Stephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: fix pause negotiationStephen Hemminger
The sky2 driver combines auto speed negotiation with automatic negotiation of pause parameters; but the ethtool interface expects them to be split. This patch allows autonegotiation to be used for speed, but manually disable flow control. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: lock less transmit completionStephen Hemminger
Transmit completion can safely run lockless against transmit start. In the normal case, completion is done from NAPI and only looks at elements that are at the tail of the ring. When doing shutdown or reset, the transmiter should be completely block by NAPI disable and blocking of transmit queue. Based on earlier work by Mike McCormack. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: cleanup restart operationsStephen Hemminger
This unifies the places that bounce the device (suspend/resume and restart). And makes the operations have the same semantics as normal dev_open/dev_stop. This also avoids setting the multicast addresses twice when device is brought up. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: hold RTNL when doing suspend/shutdown operationsStephen Hemminger
The suspend and shutdown code plays with shared state. Use consistent locking, for extra protection. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: hold spinlock around phy_power_downStephen Hemminger
Avoid any possible problems with accessing PHY registers on shutdown. This is a purely theoretical issue and is not related to any of the outstanding bug reports. Since receiver and transmitter are already shutdown and phy interrupts for this device are already disabled, there should already be enough protection. Suggested by Mike McCormack. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: Reset tx train after interrupts disabled.Mike McCormack
Reseting the tx chain too soon results in invalid tx queue positions being delivered in the status queue. This also makes sure there's no overlap between the cleanup done by sky2_tx_clean() and sky2_tx_done(). Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: Move tx reset functionality to sky2_tx_reset()Mike McCormack
This is pure refactoring. Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: Avoid rewinding sky2->tx_prodMike McCormack
Keep sky2->tx_prod consistent since int might be examined by an softirq poll or restart. Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-08-14Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-08-14b43: Implement RC calibration for rev.0/1 LP-PHYsGábor Stefanik
Also implement get/set BB mult, get/set TX gain, set RX gain, disable/restore CRS, run/stop DDFS, RX IQ est and QDIV roundup in the process. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Set HW state properlySujith
This patch fixes a bug in ath9k_stop() where the HW was not put into FULL_SLEEP state. Not doing so will cause issues in suspend-resume and the HW will not respond to chip resets. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Fix bug in PCI resumeSujith
This patch fixes a bug where the device was enabled before restoring the PCI state. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Remove duplicate variablesSujith
diversity_control and antenna_switch_swap are already present in ath9k_ops_config. Remove duplicate occurrences in ath_hw. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Remove has_hw_phycountersSujith
PHY counters are available in all chipsets supported by ath9k. Remove the check. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: update kconfig to indicate support for AR9002 familyLuis R. Rodriguez
ath9k supports the AR9002 family of chipsets. This includes the AR9285 and the miniPCI AR9223 and AR9220 (which themselves have AR9280+AR5133). We now refer people to the wiki page as it seems this is not as popular as we would have hoped. Reported-by: JD <jd1008@gmail.com> Cc: Dakota Lee <Dakota.Lee@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: allow driver to override PS defaultJohannes Berg
Sometimes drivers might have a good reason to override the PS default, like iwlwifi right now where it affects RX performance significantly at this point. This will allow them to override the default, if desired, in a way that users can still change it according to their trade-off choices, not the driver's, like would happen if the driver just disabled PS completely then. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: check for and abort dangling scan requestsJohannes Berg
If you trigger a scan request on an interface and then take it down, or rmmod the module or unplug the device the driver might "forget" to cancel the scan request. That is a bug in the driver, but the current behaviour is that we just hang endlessly waiting for the netdev refcount to become 0 which it never will. To improve robustness, check for this situation in cfg80211, warn about it and clean up behind the driver. I don't just clean up silently because it's likely that the driver also has some internal state it has now leaked. Additionally, this fixes a locking bug, clearing the scan_req pointer should be done under the rdev lock. Finally, we also need to _wait_ for the scan work and not just abort it since it might be pending and wanting to do a cleanup. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14mac80211: Fix invalid length passed to IE parser for PLINK CONFIRM framesDavid Woo
The length of the fixed portion of plink confirm frames is 4 bytes longer than the other plink_action frames. This path corrects an error in the length adjustment done for these type of frames. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14mac80211: Mark a destination sequence number as valid when a PREQ is received.David Woo
If a PREQ frame is received giving us a fresher DSN than what we have, record the new dsn and mark it as valid. This patch fixes a bug in the setting of the MESH_PATH_DSN_VALID flag. Also, minor fix to coding style on that file. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath5k: use bit shift operators for cache line sizeLuis R. Rodriguez
This matches ath9k, providing consistency when reading both drivers. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath5k: use common ath.ko ath_rxbuf_alloc()Luis R. Rodriguez
Now that its shared we can remove ath5k's own implementation. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath: add common ath_rxbuf_alloc() and make ath9k use itLuis R. Rodriguez
Turns out ath5k and ath9k can share the same helper to allocates RX skbs. We allocate skbs aligned to the cache line size. This requirement seems to have come from AR5210; when this was not done it seems sometimes we'd get bogus data. I'm also told it may have been a performance enhancement consideration. In the end I can't be sure we can remove this on new hardware so just keep this and start sharing it through ath.ko. Make ath9k start using this, ath5k is next. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: remove unused definitions from wl1251_reg.hKalle Valo
Luis reported that IRQ_MASK conflicts with include/pcmcia/cs.h on compat-wireless. Remove that and a bunch of other unused defines from wl1251_reg.h. Reported-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: remove wl1251_ops.cKalle Valo
Commit "wl1251: remove wl1251_ops" originally removed file wl1251_ops.c, but while I rebased the patch the removal got lost. Now remote the file for real. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14iwl3945: fix compilation error in iwl3945_pass_packet_to_mac80211()Kalle Valo
Commit "iwlwifi: Traffic type and counter for debugFs" broke iwl3945 in a case when CONFIG_IWLWIFI_LEDS is disabled: drivers/net/wireless/iwlwifi/iwl-3945.c:580: error: 'hdr' undeclared (first use in this function) Fix it by removing the ifdef check for hdr variable. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14b43: LP-PHY: Refactor TX gain table I/OGábor Stefanik
Make it possible to write individual gain table entries. Allow gain table entries to be written outside gain table init. Add version-agnostic helpers for writing gain tables. Use the new TX gain table helpers during table init. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14usbnet: add rx queue pausingJussi Kivilinna
Add rx queue pausing to usbnet. This is needed by rndis_wlan so that it can control rx queue and prevent received packets from being send forward before rndis_wlan receives and handles 'media connect'-indication. Without this establishing WPA connections is hard and fail often. [v2] - removed unneeded use of skb_clone Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14b43: Implement RC calibration for rev.2+ LP PHYsGábor Stefanik
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14b43: LP-PHY: Implement reading band SPROMGábor Stefanik
Some of the new variables in b43_phy_lp appear to be dead code in the vendor driver; they will be removed if they remain unused when LP-PHY implementation is finished. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14libertas: name the network device wlan%dDaniel Mack
Devices created by the libertas driver are currently called eth%d. Which is wrong, because the device does not at all have anything to do with Ethernet. And it is also confusing when used on devices with more than one network device. Fix this by calling it wlan%d. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Roel Kluin <roel.kluin@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14mac80211: Fix unresolved mesh frames queued without valid control.vifJavier Cardona
Mesh frames that could not be immediately resolved were queued with a NULL info->control.vif. This patch moves the call to mesh_nexthop_lookup closer to the point where it is handed over to ieee80211_tx(). This ensures that the unresolved frames are ready to be sent once the path is resolved. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 12:35:15 +0000