summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-19openvswitch: Add gre tunnel support.Pravin B Shelar
Add gre vport implementation. Most of gre protocol processing is pushed to gre module. It make use of gre demultiplexer therefore it can co-exist with linux device based gre tunnels. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19openvswitch: Optimize flow key match for non tunnel flows.Pravin B Shelar
Following patch adds start offset for sw_flow-key, so that we can skip tunneling information in key for non-tunnel flows. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19openvswitch: Expand action buffer size.Pravin B Shelar
MAX_ACTIONS_BUFSIZE limits action list size, set tunnel action needs extra space on action list, for now increase max actions list limit. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19openvswitch: Add tunneling interface.Pravin B Shelar
Add ovs tunnel interface for set tunnel action for userspace. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19openvswitch: Copy individual actions.Pravin B Shelar
Rather than validating actions and then copying all actiaons in one block, following patch does same operation in single pass. This validate and copy action one by one. This is required for ovs tunneling patch. This patch does not change any functionality. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19ip_tunnel: Add dont fragment flag.Pravin B Shelar
This flag will be used by ovs tunneling. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19ip_tunnel: push generic protocol handling to ip_tunnel module.Pravin B Shelar
Process skb tunnel header before sending packet to protocol handler. this allows code sharing between gre and ovs gre modules. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19ip_tunnels: extend iptunnel_xmit()Pravin B Shelar
Refactor various ip tunnels xmit functions and extend iptunnel_xmit() so that there is more code sharing. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19gre: export gre_handle_offloads() function.Pravin B Shelar
This is required for OVS GRE offloading. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19gre: export gre_build_header() function.Pravin B Shelar
This is required for ovs gre module. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19gre: Allow multiple protocol listener for gre protocol.Pravin B Shelar
Currently there is only one user is allowed to register for gre protocol. Following patch adds de-multiplexer. So that multiple modules can listen on gre protocol e.g. kernel gre devices and ovs. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19gre: Simplify gre protocol registration locking.Pravin B Shelar
Use cmpxchg() for atomic protocol registration which saves code and data space. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19sh_eth: get R8A7740 Rx descriptor word 0 shift out of #ifdefSergei Shtylyov
The only R8A7740 specific #ifdef hindering ARM multiplatform build is left in sh_eth_rx(): it covers the code shifting Rx buffer descriptor word 0 by 16. Get rid of the #ifdef by adding 'shift_rd0' field to the 'struct sh_eth_cpu_data', making the shift dependent on it, and setting it to 1 for the R8A7740 case... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19sh_eth: cleanup 'enum TD_STS_BIT'Sergei Shtylyov
Fix the comment to 'enum TD_STS_BIT', reformat the values, and add a couple of values missing before (though unused by the driver). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19sh_eth: remove redundant bits from 'eesipr_value' field initializerSergei Shtylyov
For SH7724 'eesipr_value' field initializer includes DMAC_M_RFRMER & DMAC_M_ECI bits which are already contained in 0x01ff009f -- remove them. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19sh_eth: remove 'tx_error_check' field of 'struct sh_eth_cpu_data'Sergei Shtylyov
The 'tx_error_check' field of 'struct sh_eth_cpu_data' is write-only, so remove it along with the DEFAULT_TX_ERROR_CHECK macro. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19sh_eth: add NAPI supportSergei Shtylyov
The driver hasn't used NAPI so far; implement its support at last... The patch was tested on Renesas R8A77781 BOCK-W board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19sh_eth: define/use EESR_RX_CHECK macroSergei Shtylyov
sh_eth_interrupt() uses the same Rx interrupt mask twice to check the interrupt status register -- #define EESR_RX_CHECK and use it instead. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/ath/ath9k/Kconfig drivers/net/xen-netback/netback.c net/batman-adv/bat_iv_ogm.c net/wireless/nl80211.c The ath9k Kconfig conflict was a change of a Kconfig option name right next to the deletion of another option. The xen-netback conflict was overlapping changes involving the handling of the notify list in xen_netbk_rx_action(). Batman conflict resolution provided by Antonio Quartulli, basically keep everything in both conflict hunks. The nl80211 conflict is a little more involved. In 'net' we added a dynamic memory allocation to nl80211_dump_wiphy() to fix a race that Linus reported. Meanwhile in 'net-next' the handlers were converted to use pre and post doit handlers which use a flag to determine whether to hold the RTNL mutex around the operation. However, the dump handlers to not use this logic. Instead they have to explicitly do the locking. There were apparent bugs in the conversion of nl80211_dump_wiphy() in that we were not dropping the RTNL mutex in all the return paths, and it seems we very much should be doing so. So I fixed that whilst handling the overlapping changes. To simplify the initial returns, I take the RTNL mutex after we try to allocate 'tb'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-06-19Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-06-19nl80211: fix attrbuf access race by allocating a separate oneJohannes Berg
Since my commit 3713b4e364 ("nl80211: allow splitting wiphy information in dumps"), nl80211_dump_wiphy() uses the global nl80211_fam.attrbuf for parsing the incoming data. This wouldn't be a problem if it only did so on the first dump iteration which is locked against other commands in generic netlink, but due to space constraints in cb->args (the needed state doesn't fit) I decided to always parse the original message. That's racy though since nl80211_fam.attrbuf could be used by some other parsing in generic netlink concurrently. For now, fix this by allocating a separate parse buffer (it's a bit too big for the stack, currently 1448 bytes on 64-bit). For -next, I'll change the code to parse into the global buffer in the first round only and then allocate a smaller buffer to keep the data in cb->args. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-19vxlan: fix check for migration of static entrystephen hemminger
The check introduced by: commit 26a41ae604381c5cc0caf1c3261ca6b298b5fe69 Author: stephen hemminger <stephen@networkplumber.org> Date: Mon Jun 17 12:09:58 2013 -0700 vxlan: only migrate dynamic FDB entries was not correct because it is checking flag about type of FDB entry, rather than the state (dynamic versus static). The confusion arises because vxlan is reusing values from bridge, and bridge is reusing values from neighbour table, and easy to get lost in translation. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19bcm63xx_enet: fix return value check in bcm_enet_shared_probe()Wei Yongjun
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Introduce by commit 0ae99b5fede6f3a8d252d50bb4aba29544295219 (bcm63xx_enet: split DMA channel register accesses) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19can: usb_8dev: unregister netdev before free()ingMarc Kleine-Budde
The usb_8dev hardware has problems on some xhci USB hosts. The driver fails to read the firmware revision in the probe function. This leads to the following Oops: [ 3356.635912] kernel BUG at net/core/dev.c:5701! The driver tries to free the netdev, which has already been registered, without unregistering it. This patch fixes the problem by unregistering the netdev in the error path. Reported-by: Michael Olbrich <m.olbrich@pengutronix.de> Reviewed-by: Bernd Krumboeck <krumboeck@universalnet.at> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-06-17ipv6: ndisc: fix ndisc_send_redirect writing to the wrong skbMatthias Schiffer
Since some refactoring in 5f5a011, ndisc_send_redirect called ndisc_fill_redirect_hdr_option on the wrong skb, leading to data corruption or in the worst case a panic when the skb_put failed. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17staging/rtl8192u: convert skb->tail into skb_tail_pointer(skb)Isaku Yamahata
The change set of 7a884dc "[SK_BUFF]: Convert skb->tail to sk_buff_data_t" converted skb->tail from pointer into sk_buff_data_t. Thus skb->tail is not always pointer, the area pointed by skb->tail should be accessed via skb_tail_pointer(). Found by inspection. Compile tested only. Cc: Simon Horman <horms@verge.net.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Reviewed-by: Simon Horman <horms@verge.net.au> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17pxa168_eth: convert skb->end into skb_end_pointer(skb)Isaku Yamahata
The change set of 4305b541, "[SK_BUFF]: Convert skb->end to sk_buff_data_t" converted skb->end from pointer type to sk_buff_data_t. The pointed value should be accessed via skb_end_pointer(). Since arm arch doesn't define NET_SKBUFF_DATA_USES_OFFSET, skb->end is effectively pointer. So it doesn't cause a real problem. But this patch is good for consistency. Found by inspection. Compile tested only. Cc: Simon Horman <horms@verge.net.au> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17mv643xx_eth.c: convert skb->end into skb_end_poitner(skb)Isaku Yamahata
The change set of 4305b541 "[SK_BUFF]: Convert skb->end to sk_buff_data_t" converted skb->end from pointer to sk_buff_data_t. The pointed value should be accessed via skb_end_pointer(). Since arm or ppc arch doesn't define NET_SKBUFF_DATA_USES_OFFSET, skb->end is effectively pointer. So it doesn't cause a real problem. But this patch is good for consistency. Found by inspection. Compile test only. Cc: Simon Horman <horms@verge.net.au> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17net, scsi/csgb4i: convert skb->transport_header into skb_transport_header(skb)Isaku Yamahata
The change set of 1a37e412, "net: Use 16bits for *_headers fields of struct skbuff" converted from sk_buff_data_t into 16bit integer. So skb->tail needs to be converted to skb_tail_pointer(skb). Found by inspection. Compile tested only. Cc: Simon Horman <horms@verge.net.au> Cc: Li RongQing <roy.qing.li@gmail.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17net, atm/ambassader: convert skb->tail into skb_tail_pointer(skb)Isaku Yamahata
The change set of 27a884dc, "[SK_BUFF]: Convert skb->tail to sk_buff_data_t" converted skb->tail from pointer into sk_buff_data_t. It missed skb->tail in drivers/atm/ambassador.c. This patch converts skb->tail into skb_tail_pointer(skb). Found by inspection. Compile tested only. Cc: Simon Horman <horms@verge.net.au> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17bridge: fix switched interval for MLD Query typesLinus Lüssing
General Queries (the one with the Multicast Address field set to zero / '::') are supposed to have a Maximum Response Delay of [Query Response Interval], while for Multicast-Address-Specific Queries it is [Last Listener Query Interval] - not the other way round. (see RFC2710, section 7.3+7.8) Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17vlan: restore ethtool ABI to control VLAN hardware accelerationFernando Luis Vazquez Cao
As part of the push to add 802.1ad server provider tagging support to the kernel the VLAN features flags were renamed. Unfortunately the kernel name for the VLAN hardware acceleration features that the kernel shows user space was included in the rename, which broke ethtool (txvlan and rxvlan options do not work). This patch restores the original names, i.e. the original ABI. If we wanted to make clear to users that we are refering to CTAGs we can always change ethtool's short_name and long_name for these features (for example something along the lines of txvlan -> txvlan-ctag, tx-vlan-offload -> tx-vlan-ctag-offload). Cc: Patrick McHardy <kaber@trash.net> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17net: sctp: remove SCTP_STATIC macroDaniel Borkmann
SCTP_STATIC is just another define for the static keyword. It's use is inconsistent in the SCTP code anyway and it was introduced in the initial implementation of SCTP in 2.5. We have a regression suite in lksctp-tools, but this is for user space only, so noone makes use of this macro anymore. The kernel test suite for 2.5 is incompatible with the current SCTP code anyway. So simply Remove it, to be more consistent with the rest of the kernel code. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17net: sctp: get rid of t_new macro for kzallocDaniel Borkmann
t_new rather obfuscates things where everyone else is using actual function names instead of that macro, so replace it with kzalloc, which is the function t_new wraps. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17fec: Add support to restart autonegotiateChris Healy
Add ethtool operation to restart autonegotiation via the PHY. Tested on i.MX28EVK. Signed-off-by: Chris Healy <cphealy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17bonding: don't call alb_set_slave_mac_addr() while atomicVeaceslav Falico
alb_set_slave_mac_addr() sets the mac address in alb mode via dev_set_mac_address(), which might sleep. It's called from alb_handle_addr_collision_on_attach() in atomic context (under read_lock(bond->lock)), thus triggering a bug. Fix this by moving the lock inside alb_handle_addr_collision_on_attach(). v1->v2: As Nikolay Aleksandrov noticed, we can drop the bond->lock completely. Also, use bond_slave_has_mac(), when possible. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17net: cpsw: check for cpts pointer after its allocationSebastian Siewior
after priv->cpts got allocated then this pointer should check to determine if the allocation succeeded or not. Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into wireless John W. Linville says: ==================== This will probably be the last batch of wireless fixes intended for 3.10. Many of these are one- or two-liners, and a couple of others are mostly relocating existing code to avoid races or to limit the code to effecting specific hardware, etc. The mac80211 fixes have a couple of exceptions to the above. Regarding those, Johannes says: "Following davem's complaint about my patch, here's a new pull request w/o the patch he was complaining about, but instead with the const fix rolled into the fix. I have a fix for radar detection, one for rate control and a workaround for broken HT APs which is a regression fix because we didn't rely on them to be correct before." Johannes also sends some iwlwifi fixes: "I picked up Nikolay's patch for the chain noise calibration bug that seems to have been there forever, a fix from Emmanuel for setting TX flags on BAR frames and a fix of my own to avoid printing request_module() errors if the kernel isn't even modular. We also have our own version of Stanislaw's fix for rate control." Along with those... Anderson Lizardo fixes a Bluetooth memory corruption bug when an MTU value is set to too small of a value. Arend van Spriel sends a revised brcmsmac bug that fixes a regression caused by a bad return value in an earlier patch. He also sends a brcmfmac fix to avoid an oops when loading the driver at boot. Daniel Drake fixes a race condition in btmrvl that causes hangs on suspend for OLPC hardware. Johan Hedberg adds a check to avoid sending a HCI_Delete_Stored_Link_Key command to devices that don't support them, avoiding some scary looking log spam. Stanislaw Gruszka gives us a fix for iwlegacy to be able to use rates higher than 1Mb/s on older wireless networks. He also sends an rt2x00 fix to reinstate older tx power handling behavior for some devices that didn't work well with the current code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter fixes. They are targeted to the TCP option targets, that have receive some scrinity in the last week. The changes are: * Fix TCPOPTSTRIP, it stopped working in the forward chain as tcp_hdr uses skb->transport_header, and we cannot use that in the forwarding case, from myself. * Fix default IPv6 MSS in TCPMSS in case of absence of TCP MSS options, from Phil Oester. * Fix missing fragmentation handling again in TCPMSS, from Phil Oester. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17alx: add a simple AR816x/AR817x device driverJohannes Berg
This is a very simple driver, based on the original vendor driver that Qualcomm/Atheros published/submitted previously, but reworked to make the code saner. However, it also lost a number of features (TSO/GSO, VLAN acceleration and multi- queue support) in the process, as well as debugging support features I didn't have any use for. The only thing I left is checksum offload. More features can obviously be added, but this seemed like a good start for having a driver in mainline at all. Johannes Stezenbach has verified that the driver works on AR8161, I have a AR8171 myself. The E2200 device ID I found on github in somebody's repository. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17tg3: Prevent system hang during repeated EEH errors.Michael Chan
The current tg3 code assumes the pci_error_handlers to be always called in sequence. In particular, during ->error_detected(), NAPI is disabled and the device is shutdown. The device is later reset and NAPI re-enabled in ->slot_reset() and ->resume(). In EEH, if more than 6 errors are detected in a hour, only ->error_detected() will be called. This will leave the driver in an inconsistent state as NAPI is disabled but netif_running state is still true. When the device is later closed, we'll try to disable NAPI again and it will loop forever. We fix this by closing the device if we encounter any error conditions during the normal sequence of the pci_error_handlers. v2: Remove the changes in tg3_io_resume() based on Benjamin Poirier's feedback. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17Fix the VLAN_TAG_PRESENT in netvsc_recv_callback()Haiyang Zhang
We should call __vlan_hwaccel_put_tag() only if the packet comes from vlan, otherwise VLAN_TAG_PRESENT will always be added. Reported-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17vxlan: handle skb_clone failurestephen hemminger
If skb_clone fails if out of memory then just skip the fanout. Problem was introduced in 3.10 with: commit 6681712d67eef14c4ce793561c3231659153a320 Author: David Stevens <dlstevens@us.ibm.com> Date: Fri Mar 15 04:35:51 2013 +0000 vxlan: generalize forwarding tables Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17vxlan: only migrate dynamic FDB entriesstephen hemminger
Only migrate dynamic forwarding table entries, don't modify static entries. If packet received from incorrect source IP address assume it is an imposter and drop it. This patch applies only to -net, a different patch would be needed for earlier kernels since the NTF_SELF flag was introduced with 3.10. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17vxlan: fix race between flush and incoming learningstephen hemminger
It is possible for a packet to arrive during vxlan_stop(), and have a dynamic entry created. Close this by checking if device is up. CPU1 CPU2 vxlan_stop vxlan_flush hash_lock acquired vxlan_encap_recv vxlan_snoop waiting for hash_lock hash_lock relased vxlan_flush done hash_lock acquired vxlan_fdb_create This is a day-one bug in vxlan goes back to 3.7. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17Merge branch 'tipc'David S. Miller
Paul Gortmaker says: ==================== This is a rework of the content sent earlier[1], with the following changes: -drop the Kconfig --> modparam conversion patch; this was requested to be replaced[2] with a dynamic port quantity resizing. Ying and Erik were discussing how best to achieve this, and then vacation schedules got in the way, so implementing that will come (hopefully) in the next round. -rework the sk_rcvbuf patch to allow memory resizing via sysctl as per what Ying and Neil discussed[3] -add 4 more seemingly straigtforward and relatively small changes from Ying (the last 4 in the series). -add cosmetic UAPI comment update patch from Ying. That said, the largest change is still the one where we make use of the fact that linux supports kernel threads and do the server like operations within kernel threads. As Jon says: We remove the last remnants of the TIPC native API, to make it possible to simplify locking policy and solve a problem with lost topology events. First, we introduce a socket-based alternative to the native API. Second, we convert the two remaining users of the native API, the TIPC internal topology server and the configuarion server, to use the new API. Third, we remove the remaining code pertaining to the native API. I have re-tested this collection of commits between 32 and 64 bit x86 machines using the standard tipc test suite, and build tested for ppc. [1] http://patchwork.ozlabs.org/patch/247687/ [2] http://patchwork.ozlabs.org/patch/247680/ [3] http://patchwork.ozlabs.org/patch/247688/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17tipc: remove dev_base_lock use from enable_bearerYing Xue
Convert enable_bearer() to RCU locking with dev_get_by_name(). Based on a similar changeset in commit 840a185d ["aoe: remove dev_base_lock use from aoecmd_cfg_pkts()"] -- quoting that: "dev_base_lock is the legacy way to lock the device list, and is planned to disappear. (writers hold RTNL, readers hold RCU lock)" Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17tipc: fix wrong return value for link_send_sections_long routineYing Xue
When skb buffer cannot be allocated in link_send_sections_long(), -ENOMEM error code instead of -EFAULT should be returned to its caller. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17tipc: make tipc_link_send_sections_fast exit earlierYing Xue
Once message build request function returns invalid code, the process of sending message cannot continue. So in case of message build failure, tipc_link_send_sections_fast() should return immediately. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>