| Age | Commit message (Collapse) | Author |
|---|
|
commit 8838b2af23caf1ff0610caef2795d6668a013b2d upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.2.7.3 states that DC1 (XON) and DC3 (XOFF)
are the control characters defined in ISO/IEC 646. These shall be quoted if
seen in the data stream to avoid interpretation as flow control characters.
ISO/IEC 646 refers to the set of ISO standards described as the ISO
7-bit coded character set for information interchange. Its final version
is also known as ITU T.50.
See https://www.itu.int/rec/T-REC-T.50-199209-I/en
To abide the standard it is needed to quote DC1 and DC3 correctly if these
are seen as data bytes and not as control characters. The current
implementation already tries to enforce this but fails to catch all
defined cases. 3GPP 27.010 chapter 5.2.7.3 clearly states that the most
significant bit shall be ignored for DC1 and DC3 handling. The current
implementation handles only the case with the most significant bit set 0.
Cases in which DC1 and DC3 have the most significant bit set 1 are left
unhandled.
This patch fixes this by masking the data bytes with ISO_IEC_646_MASK (only
the 7 least significant bits set 1) before comparing them with XON
(a.k.a. DC1) and XOFF (a.k.a. DC3) when testing which byte values need
quotation via byte stuffing.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220120101857.2509-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 037b91ec7729524107982e36ec4b40f9b174f7a2 upstream.
x_char is ignored by stm32_usart_start_tx() when xmit buffer is empty.
Fix start_tx condition to allow x_char to be sent.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20220111164441.6178-3-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9d967b2ce40d71e968eb839f36c936b8a9cf1ea upstream.
The buffer handling in pm_show_wakelocks() is tricky, and hopefully
correct. Ensure it really is correct by using sysfs_emit_at() which
handles all of the tricky string handling logic in a PAGE_SIZE buffer
for us automatically as this is a sysfs file being read from.
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7fc3b7c2981bbd1047916ade327beccb90994eee upstream.
udf_expand_file_adinicb() calls directly ->writepage to write data
expanded into a page. This however misses to setup inode for writeback
properly and so we can crash on inode->i_wb dereference when submitting
page for IO like:
BUG: kernel NULL pointer dereference, address: 0000000000000158
#PF: supervisor read access in kernel mode
...
<TASK>
__folio_start_writeback+0x2ac/0x350
__block_write_full_page+0x37d/0x490
udf_expand_file_adinicb+0x255/0x400 [udf]
udf_file_write_iter+0xbe/0x1b0 [udf]
new_sync_write+0x125/0x1c0
vfs_write+0x28e/0x400
Fix the problem by marking the page dirty and going through the standard
writeback path to write the page. Strictly speaking we would not even
have to write the page but we want to catch e.g. ENOSPC errors early.
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
CC: stable@vger.kernel.org
Fixes: 52ebea749aae ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ea8569194b43f0f01f0a84c689388542c7254a1f upstream.
When we fail to expand inode from inline format to a normal format, we
restore inode to contain the original inline formatting but we forgot to
set i_lenAlloc back. The mismatch between i_lenAlloc and i_size was then
causing further problems such as warnings and lost data down the line.
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
CC: stable@vger.kernel.org
Fixes: 7e49b6f2480c ("udf: Convert UDF to new truncate calling sequence")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c9db6679be4348b8aae108e11d4be2f83976e30 upstream.
Suppose we have an environment with a number of non-NPIV FCP devices
(virtual HBAs / FCP devices / zfcp "adapter"s) sharing the same physical
FCP channel (HBA port) and its I_T nexus. Plus a number of storage target
ports zoned to such shared channel. Now one target port logs out of the
fabric causing an RSCN. Zfcp reacts with an ADISC ELS and subsequent port
recovery depending on the ADISC result. This happens on all such FCP
devices (in different Linux images) concurrently as they all receive a copy
of this RSCN. In the following we look at one of those FCP devices.
Requests other than FSF_QTCB_FCP_CMND can be slow until they get a
response.
Depending on which requests are affected by slow responses, there are
different recovery outcomes. Here we want to fix failed recoveries on port
or adapter level by avoiding recovery requests that can be slow.
We need the cached N_Port_ID for the remote port "link" test with ADISC.
Just before sending the ADISC, we now intentionally forget the old cached
N_Port_ID. The idea is that on receiving an RSCN for a port, we have to
assume that any cached information about this port is stale. This forces a
fresh new GID_PN [FC-GS] nameserver lookup on any subsequent recovery for
the same port. Since we typically can still communicate with the nameserver
efficiently, we now reach steady state quicker: Either the nameserver still
does not know about the port so we stop recovery, or the nameserver already
knows the port potentially with a new N_Port_ID and we can successfully and
quickly perform open port recovery. For the one case, where ADISC returns
successfully, we re-initialize port->d_id because that case does not
involve any port recovery.
This also solves a problem if the storage WWPN quickly logs into the fabric
again but with a different N_Port_ID. Such as on virtual WWPN takeover
during target NPIV failover.
[https://www.redbooks.ibm.com/abstracts/redp5477.html] In that case the
RSCN from the storage FDISC was ignored by zfcp and we could not
successfully recover the failover. On some later failback on the storage,
we could have been lucky if the virtual WWPN got the same old N_Port_ID
from the SAN switch as we still had cached. Then the related RSCN
triggered a successful port reopen recovery. However, there is no
guarantee to get the same N_Port_ID on NPIV FDISC.
Even though NPIV-enabled FCP devices are not affected by this problem, this
code change optimizes recovery time for gone remote ports as a side effect.
The timely drop of cached N_Port_IDs prevents unnecessary slow open port
attempts.
While the problem might have been in code before v2.6.32 commit
799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp") this fix
depends on the gid_pn_work introduced with that commit, so we mark it as
culprit to satisfy fix dependencies.
Note: Point-to-point remote port is already handled separately and gets its
N_Port_ID from the cached peer_d_id. So resetting port->d_id in general
does not affect PtP.
Link: https://lore.kernel.org/r/20220118165803.3667947-1-maier@linux.ibm.com
Fixes: 799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp")
Cc: <stable@vger.kernel.org> #2.6.32+
Suggested-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 663d34c8df98740f1e90241e78e456d00b3c6cad upstream.
Currently if z/VM guest is allowed to retrieve hypervisor performance
data globally for all guests (privilege class B) the query is formed in a
way to include all guests but the group name is left empty. This leads to
that z/VM guests which have access control group set not being included
in the results (even local vm).
Change the query group identifier from empty to "any" to retrieve
information about all guests from any groups (or without a group set).
Cc: stable@vger.kernel.org
Fixes: 31cb4bd31a48 ("[S390] Hypervisor filesystem (s390_hypfs) for z/VM")
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 899663be5e75dc0174dc8bda0b5e6826edf0b29a upstream.
Check for out-of-bound read was being performed at the end of while
num_reports loop, and would fill journal with false positives. Added
check to beginning of loop processing so that it doesn't get checked
after ptr has been advanced.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: syphyr <syphyr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Stopping tasklet and hrtimer rely on the active state of tasklet and
hrtimer sequentially in bcm_remove_op(), the op object will be freed
if they are all unactive. Assume the hrtimer timeout is short, the
hrtimer cb has been excuted after tasklet conditional judgment which
must be false after last round tasklet_kill() and before condition
hrtimer_active(), it is false when execute to hrtimer_active(). Bug
is triggerd, because the stopping action is end and the op object
will be freed, but the tasklet is scheduled. The resources of the op
object will occur UAF bug.
Move hrtimer_cancel() behind tasklet_kill() and switch 'while () {...}'
to 'do {...} while ()' to fix the op UAF problem.
Fixes: a06393ed0316 ("can: bcm: fix hrtimer/tasklet termination in bcm op removal")
Reported-by: syzbot+5ca851459ed04c778d1d@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Link: https://lore.kernel.org/r/20220127180256.347004543@linuxfoundation.org
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7938d61591d33394a21bdd7797a245b65428f44c upstream.
We need to flush TLBs before releasing backing store otherwise userspace
is able to encounter stale entries if a) it is not declaring access to
certain buffers and b) it races with the backing store release from a
such undeclared execution already executing on the GPU in parallel.
The approach taken is to mark any buffer objects which were ever bound
to the GPU and to trigger a serialized TLB flush when their backing
store is released.
Alternatively the flushing could be done on VMA unbind, at which point
we would be able to ascertain whether there is potential a parallel GPU
execution (which could race), but essentially it boils down to paying
the cost of TLB flushes potentially needlessly at VMA unbind time (when
the backing store is not known to be going away so not needed for
safety), versus potentially needlessly at backing store relase time
(since we at that point cannot tell whether there is anything executing
on the GPU which uses that object).
Thereforce simplicity of implementation has been chosen for now with
scope to benchmark and refine later as required.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Link: https://lore.kernel.org/r/20220124183927.095545464@linuxfoundation.org
Tested-by: Pavel Machek (CIP) <pavel@denx.de> =
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 99218cbf81bf21355a3de61cd46a706d36e900e6 upstream.
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: 115978859272 ("i825xx: Move the Intel 82586/82593/82596 based drivers")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9deb48b53e7f4056c2eaa2dc2ee3338df619e4f6 upstream.
The driver neglects to check the result of platform_get_irq_optional()'s
call and blithely passes the negative error codes to devm_request_irq()
(which takes *unsigned* IRQ #), causing it to fail with -EINVAL.
Stop calling devm_request_irq() with the invalid IRQ #s.
Fixes: 8562056f267d ("net: bcmgenet: request Wake-on-LAN interrupt")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb80445c438c78b40b547d12b8d56596ce4ccfeb upstream.
commit 56b765b79e9a ("htb: improved accuracy at high rates") broke
"overhead X", "linklayer atm" and "mpu X" attributes.
"overhead X" and "linklayer atm" have already been fixed. This restores
the "mpu X" handling, as might be used by DOCSIS or Ethernet shaping:
tc class add ... htb rate X overhead 4 mpu 64
The code being fixed is used by htb, tbf and act_police. Cake has its
own mpu handling. qdisc_calculate_pkt_len still uses the size table
containing values adjusted for mpu by user space.
iproute2 tc has always passed mpu into the kernel via a tc_ratespec
structure, but the kernel never directly acted on it, merely stored it
so that it could be read back by `tc class show`.
Rather, tc would generate length-to-time tables that included the mpu
(and linklayer) in their construction, and the kernel used those tables.
Since v3.7, the tables were no longer used. Along with "mpu", this also
broke "overhead" and "linklayer" which were fixed in 01cb71d2d47b
("net_sched: restore "overhead xxx" handling", v3.10) and 8a8e3d84b171
("net_sched: restore "linklayer atm" handling", v3.11).
"overhead" was fixed by simply restoring use of tc_ratespec::overhead -
this had originally been used by the kernel but was initially omitted
from the new non-table-based calculations.
"linklayer" had been handled in the table like "mpu", but the mode was
not originally passed in tc_ratespec. The new implementation was made to
handle it by getting new versions of tc to pass the mode in an extended
tc_ratespec, and for older versions of tc the table contents were analysed
at load time to deduce linklayer.
As "mpu" has always been given to the kernel in tc_ratespec,
accompanying the mpu-based table, we can restore system functionality
with no userspace change by making the kernel act on the tc_ratespec
value.
Fixes: 56b765b79e9a ("htb: improved accuracy at high rates")
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Vimalkumar <j.vimal@gmail.com>
Link: https://lore.kernel.org/r/20220112170210.1014351-1-kevin@bracey.fi
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 912f7c6f7fac273f40e621447cf17d14b50d6e5b upstream.
The hardware channel next descriptor view structure contains just
fields of 32 bits, while dma_addr_t can be of type u64 or u32
depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to comply with
what the hardware expects.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-11-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1385eb4d14d447cc5d744bc2ac34f43be66c9963 upstream.
AT_XDMAC_CNDC_NDVIEW_NDV3 was set even for AT_XDMAC_MBR_UBC_NDV2,
because of the wrong bit handling. Fix it.
Fixes: ee0fe35c8dcd ("dmaengine: xdmac: Handle descriptor's view 3 registers")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-10-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5edc24ac876a928f36f407a0fcdb33b94a3a210f upstream.
It is desirable to do the prints without the lock held if possible, so
move the print after the lock is released.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-4-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bccfb96b59179d4f96cbbd1ddff8fac6d335eae4 upstream.
tx_submit is supposed to push the current transaction descriptor to a
pending queue, waiting for issue_pending() to be called. issue_pending()
must start the transfer, not tx_submit(), thus remove
at_xdmac_start_xfer() from at_xdmac_tx_submit(). Clients of at_xdmac that
assume that tx_submit() starts the transfer must be updated and call
dma_async_issue_pending() if they miss to call it (one example is
atmel_serial).
As the at_xdmac_start_xfer() is now called only from
at_xdmac_advance_work() when !at_xdmac_chan_is_enabled(), the
at_xdmac_chan_is_enabled() check is no longer needed in
at_xdmac_start_xfer(), thus remove it.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-2-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2836615aa22de55b8fca5e32fe1b27a67cda625e upstream.
When under stress, cleanup_net() can have to dismantle
netns in big numbers. ops_exit_list() currently calls
many helpers [1] that have no schedule point, and we can
end up with soft lockups, particularly on hosts
with many cpus.
Even for moderate amount of netns processed by cleanup_net()
this patch avoids latency spikes.
[1] Some of these helpers like fib_sync_up() and fib_sync_down_dev()
are very slow because net/ipv4/fib_semantics.c uses host-wide hash tables,
and ifindex is used as the only input of two hash functions.
ifindexes tend to be the same for all netns (lo.ifindex==1 per instance)
This will be fixed in a separate patch.
Fixes: 72ad937abd0a ("net: Add support for batching network namespace cleanups")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aba57a823d2985a2cc8c74a2535f3a88e68d9424 upstream.
The check for the number of available TX ring slots was off by 1 since a
slot is required for the skb header as well as each fragment. This could
result in overwriting a TX ring slot that was still in use.
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b400c2f4f4c53c86594dd57098970d97d488bfde upstream.
When resetting the device, wait for the PhyRstCmplt bit to be set
in the interrupt status register before continuing initialization, to
ensure that the core is actually ready. When using an external PHY, this
also ensures we do not start trying to access the PHY while it is still
in reset. The PHY reset is initiated by the core reset which is
triggered just above, but remains asserted for 5ms after the core is
reset according to the documentation.
The MgtRdy bit could also be waited for, but unfortunately when using
7-series devices, the bit does not appear to work as documented (it
seems to behave as some sort of link state indication and not just an
indication the transceiver is ready) so it can't really be relied on for
this purpose.
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d6d7f1cb67cdee15f1a0e85aacfb924e0e02435 upstream.
wait_for_unix_gc() reads unix_tot_inflight & gc_in_progress
without synchronization.
Adds READ_ONCE()/WRITE_ONCE() and their associated comments
to better document the intent.
BUG: KCSAN: data-race in unix_inflight / wait_for_unix_gc
write to 0xffffffff86e2b7c0 of 4 bytes by task 9380 on cpu 0:
unix_inflight+0x1e8/0x260 net/unix/scm.c:63
unix_attach_fds+0x10c/0x1e0 net/unix/scm.c:121
unix_scm_to_skb net/unix/af_unix.c:1674 [inline]
unix_dgram_sendmsg+0x679/0x16b0 net/unix/af_unix.c:1817
unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2549
__do_sys_sendmmsg net/socket.c:2578 [inline]
__se_sys_sendmmsg net/socket.c:2575 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffffffff86e2b7c0 of 4 bytes by task 9375 on cpu 1:
wait_for_unix_gc+0x24/0x160 net/unix/garbage.c:196
unix_dgram_sendmsg+0x8e/0x16b0 net/unix/af_unix.c:1772
unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2549
__do_sys_sendmmsg net/socket.c:2578 [inline]
__se_sys_sendmmsg net/socket.c:2575 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00000002 -> 0x00000004
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 9375 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 9915672d4127 ("af_unix: limit unix_tot_inflight")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220114164328.2038499-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d24846a4246b6e61ecbd036880a4adf61681d241 upstream.
kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Fix memory leak by calling kobject_put().
Fixes: 73f368cf679b ("Kobject: change drivers/parisc/pdc_stable.c to use kobject_init_and_add")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3f7c239c7844d2044ed399399d97a5f1c6008e1b upstream.
As reported by sparse: In the remove path, the driver would attempt to
unmap its own priv pointer - instead of the io memory that it mapped
in probe.
Fixes: 9f35a7342cff ("net/fsl: introduce Freescale 10G MDIO driver")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0d375d610fa96524e2ee2b46830a46a7bfa92a9f upstream.
This block is used in (at least) T1024 and T1040, including their
variants like T1023 etc.
Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6eeaf88fd586f05aaf1d48cb3a139d2a5c6eb055 upstream.
We probably want to remove the indirect block to extents migration
feature after a deprecation window, but until then, let's fix a
potential data loss problem caused by the fact that we put the
tmp_inode on the orphan list. In the unlikely case where we crash and
do a journal recovery, the data blocks belonging to the inode being
migrated are also represented in the tmp_inode on the orphan list ---
and so its data blocks will get marked unallocated, and available for
reuse.
Instead, stop putting the tmp_inode on the oprhan list. So in the
case where we crash while migrating the inode, we'll leak an inode,
which is not a disaster. It will be easily fixed the next time we run
fsck, and it's better than potentially having blocks getting claimed
by two different files, and losing data as a result.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 380a0091cab482489e9b19e07f2a166ad2b76d5c upstream.
We got issue as follows when run syzkaller:
[ 167.936972] EXT4-fs error (device loop0): __ext4_remount:6314: comm rep: Abort forced by user
[ 167.938306] EXT4-fs (loop0): Remounting filesystem read-only
[ 167.981637] Assertion failure in ext4_getblk() at fs/ext4/inode.c:847: '(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) || handle != NULL || create == 0'
[ 167.983601] ------------[ cut here ]------------
[ 167.984245] kernel BUG at fs/ext4/inode.c:847!
[ 167.984882] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[ 167.985624] CPU: 7 PID: 2290 Comm: rep Tainted: G B 5.16.0-rc5-next-20211217+ #123
[ 167.986823] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[ 167.988590] RIP: 0010:ext4_getblk+0x17e/0x504
[ 167.989189] Code: c6 01 74 28 49 c7 c0 a0 a3 5c 9b b9 4f 03 00 00 48 c7 c2 80 9c 5c 9b 48 c7 c6 40 b6 5c 9b 48 c7 c7 20 a4 5c 9b e8 77 e3 fd ff <0f> 0b 8b 04 244
[ 167.991679] RSP: 0018:ffff8881736f7398 EFLAGS: 00010282
[ 167.992385] RAX: 0000000000000094 RBX: 1ffff1102e6dee75 RCX: 0000000000000000
[ 167.993337] RDX: 0000000000000001 RSI: ffffffff9b6e29e0 RDI: ffffed102e6dee66
[ 167.994292] RBP: ffff88816a076210 R08: 0000000000000094 R09: ffffed107363fa09
[ 167.995252] R10: ffff88839b1fd047 R11: ffffed107363fa08 R12: ffff88816a0761e8
[ 167.996205] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000001
[ 167.997158] FS: 00007f6a1428c740(0000) GS:ffff88839b000000(0000) knlGS:0000000000000000
[ 167.998238] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 167.999025] CR2: 00007f6a140716c8 CR3: 0000000133216000 CR4: 00000000000006e0
[ 167.999987] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 168.000944] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 168.001899] Call Trace:
[ 168.002235] <TASK>
[ 168.007167] ext4_bread+0xd/0x53
[ 168.007612] ext4_quota_write+0x20c/0x5c0
[ 168.010457] write_blk+0x100/0x220
[ 168.010944] remove_free_dqentry+0x1c6/0x440
[ 168.011525] free_dqentry.isra.0+0x565/0x830
[ 168.012133] remove_tree+0x318/0x6d0
[ 168.014744] remove_tree+0x1eb/0x6d0
[ 168.017346] remove_tree+0x1eb/0x6d0
[ 168.019969] remove_tree+0x1eb/0x6d0
[ 168.022128] qtree_release_dquot+0x291/0x340
[ 168.023297] v2_release_dquot+0xce/0x120
[ 168.023847] dquot_release+0x197/0x3e0
[ 168.024358] ext4_release_dquot+0x22a/0x2d0
[ 168.024932] dqput.part.0+0x1c9/0x900
[ 168.025430] __dquot_drop+0x120/0x190
[ 168.025942] ext4_clear_inode+0x86/0x220
[ 168.026472] ext4_evict_inode+0x9e8/0xa22
[ 168.028200] evict+0x29e/0x4f0
[ 168.028625] dispose_list+0x102/0x1f0
[ 168.029148] evict_inodes+0x2c1/0x3e0
[ 168.030188] generic_shutdown_super+0xa4/0x3b0
[ 168.030817] kill_block_super+0x95/0xd0
[ 168.031360] deactivate_locked_super+0x85/0xd0
[ 168.031977] cleanup_mnt+0x2bc/0x480
[ 168.033062] task_work_run+0xd1/0x170
[ 168.033565] do_exit+0xa4f/0x2b50
[ 168.037155] do_group_exit+0xef/0x2d0
[ 168.037666] __x64_sys_exit_group+0x3a/0x50
[ 168.038237] do_syscall_64+0x3b/0x90
[ 168.038751] entry_SYSCALL_64_after_hwframe+0x44/0xae
In order to reproduce this problem, the following conditions need to be met:
1. Ext4 filesystem with no journal;
2. Filesystem image with incorrect quota data;
3. Abort filesystem forced by user;
4. umount filesystem;
As in ext4_quota_write:
...
if (EXT4_SB(sb)->s_journal && !handle) {
ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
" cancelled because transaction is not started",
(unsigned long long)off, (unsigned long long)len);
return -EIO;
}
...
We only check handle if NULL when filesystem has journal. There is need
check handle if NULL even when filesystem has no journal.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211223015506.297766-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e81c9302a6c3c008f5c30beb73b38adb0170ff2d upstream.
When migrating to extents, the temporary inode will have it's own checksum
seed. This means that, when swapping the inodes data, the inode checksums
will be incorrect.
This can be fixed by recalculating the extents checksums again. Or simply
by copying the seed into the temporary inode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213357
Reported-by: Jeroen van Wolffelaar <jeroen@wolffelaar.nl>
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20211214175058.19511-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3fea4d9d160186617ff40490ae01f4f4f36b28ff upstream.
it seems freeing the write buffers in the error path of the
ubifs_remount_rw() is wrong. It leads later to a kernel oops like this:
[10016.431274] UBIFS (ubi0:0): start fixing up free space
[10090.810042] UBIFS (ubi0:0): free space fixup complete
[10090.814623] UBIFS error (ubi0:0 pid 512): ubifs_remount_fs: cannot
spawn "ubifs_bgt0_0", error -4
[10101.915108] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started,
PID 517
[10105.275498] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000030
[10105.284352] Mem abort info:
[10105.287160] ESR = 0x96000006
[10105.290252] EC = 0x25: DABT (current EL), IL = 32 bits
[10105.295592] SET = 0, FnV = 0
[10105.298652] EA = 0, S1PTW = 0
[10105.301848] Data abort info:
[10105.304723] ISV = 0, ISS = 0x00000006
[10105.308573] CM = 0, WnR = 0
[10105.311564] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000f03d1000
[10105.318034] [0000000000000030] pgd=00000000f6cee003,
pud=00000000f4884003, pmd=0000000000000000
[10105.326783] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[10105.332355] Modules linked in: ath10k_pci ath10k_core ath mac80211
libarc4 cfg80211 nvme nvme_core cryptodev(O)
[10105.342468] CPU: 3 PID: 518 Comm: touch Tainted: G O
5.4.3 #1
[10105.349517] Hardware name: HYPEX CPU (DT)
[10105.353525] pstate: 40000005 (nZcv daif -PAN -UAO)
[10105.358324] pc : atomic64_try_cmpxchg_acquire.constprop.22+0x8/0x34
[10105.364596] lr : mutex_lock+0x1c/0x34
[10105.368253] sp : ffff000075633aa0
[10105.371563] x29: ffff000075633aa0 x28: 0000000000000001
[10105.376874] x27: ffff000076fa80c8 x26: 0000000000000004
[10105.382185] x25: 0000000000000030 x24: 0000000000000000
[10105.387495] x23: 0000000000000000 x22: 0000000000000038
[10105.392807] x21: 000000000000000c x20: ffff000076fa80c8
[10105.398119] x19: ffff000076fa8000 x18: 0000000000000000
[10105.403429] x17: 0000000000000000 x16: 0000000000000000
[10105.408741] x15: 0000000000000000 x14: fefefefefefefeff
[10105.414052] x13: 0000000000000000 x12: 0000000000000fe0
[10105.419364] x11: 0000000000000fe0 x10: ffff000076709020
[10105.424675] x9 : 0000000000000000 x8 : 00000000000000a0
[10105.429986] x7 : ffff000076fa80f4 x6 : 0000000000000030
[10105.435297] x5 : 0000000000000000 x4 : 0000000000000000
[10105.440609] x3 : 0000000000000000 x2 : ffff00006f276040
[10105.445920] x1 : ffff000075633ab8 x0 : 0000000000000030
[10105.451232] Call trace:
[10105.453676] atomic64_try_cmpxchg_acquire.constprop.22+0x8/0x34
[10105.459600] ubifs_garbage_collect+0xb4/0x334
[10105.463956] ubifs_budget_space+0x398/0x458
[10105.468139] ubifs_create+0x50/0x180
[10105.471712] path_openat+0x6a0/0x9b0
[10105.475284] do_filp_open+0x34/0x7c
[10105.478771] do_sys_open+0x78/0xe4
[10105.482170] __arm64_sys_openat+0x1c/0x24
[10105.486180] el0_svc_handler+0x84/0xc8
[10105.489928] el0_svc+0x8/0xc
[10105.492808] Code: 52800013 17fffffb d2800003 f9800011 (c85ffc05)
[10105.498903] ---[ end trace 46b721d93267a586 ]---
To reproduce the problem:
1. Filesystem initially mounted read-only, free space fixup flag set.
2. mount -o remount,rw <mountpoint>
3. it takes some time (free space fixup running)
... try to terminate running mount by CTRL-C
... does not respond, only after free space fixup is complete
... then "ubifs_remount_fs: cannot spawn "ubifs_bgt0_0", error -4"
4. mount -o remount,rw <mountpoint>
... now finished instantly (fixup already done).
5. Create file or just unmount the filesystem and we get the oops.
Cc: <stable@vger.kernel.org>
Fixes: b50b9f408502 ("UBIFS: do not free write-buffers when in R/O mode")
Signed-off-by: Petr Cvachoucek <cvachoucek@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 80211be1b9dec04cc2805d3d81e2091ecac289a1 ]
Instead of one shot run of ADC at beginning of charging, run continuous
conversion to ensure that all charging-related values are monitored
properly (input voltage, input current, themperature etc.).
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d94d94969a4ba07a43d62429c60372320519c391 ]
The allocated buffers are used as a command payload, for which the block
layer and/or DMA API do the proper bounce buffering if needed.
Link: https://lore.kernel.org/r/20211222090842.920724-1-hch@lst.de
Reported-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95339b70677dc6f9a2d669c4716058e71b8dc1c7 ]
A large number of the following errors is reported when compiling
with clang:
cvmx-bootinfo.h:326:3: error: adding 'int' to a string does not append to the string [-Werror,-Wstring-plus-int]
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NULL)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cvmx-bootinfo.h:321:20: note: expanded from macro 'ENUM_BRD_TYPE_CASE'
case x: return(#x + 16); /* Skip CVMX_BOARD_TYPE_ */
~~~^~~~
cvmx-bootinfo.h:326:3: note: use array indexing to silence this warning
cvmx-bootinfo.h:321:20: note: expanded from macro 'ENUM_BRD_TYPE_CASE'
case x: return(#x + 16); /* Skip CVMX_BOARD_TYPE_ */
^
Follow the prompts to use the address operator '&' to fix this error.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d52097010078c1844348dc0e467305e5f90fd317 ]
The data type of hcnt and lcnt in the struct dw_i2c_dev is of type u16.
It's better to have same data type in struct dw_scl_sda_cfg as well.
Reported-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6fadb494a638d8b8a55864ecc6ac58194f03f327 ]
Currently ALSA sequencer core tries to process the queued events as
much as possible when they become dispatchable. If applications try
to queue too massive events to be processed at the very same timing,
the sequencer core would still try to process such all events, either
in the interrupt context or via some notifier; in either away, it
might be a cause of RCU stall or such problems.
As a potential workaround for those problems, this patch adds the
upper limit of the amount of events to be processed. The remaining
events are processed in the next batch, so they won't be lost.
For the time being, it's limited up to 1000 events per queue, which
should be high enough for any normal usages.
Reported-by: Zqiang <qiang.zhang1211@gmail.com>
Reported-by: syzbot+bb950e68b400ab4f65f8@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211102033222.3849-1-qiang.zhang1211@gmail.com
Link: https://lore.kernel.org/r/20211207165146.2888-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33dc3e3e99e626ce51f462d883b05856c6c30b1d ]
sparse warnings: (new ones prefixed by >>)
>> drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected char [noderef] __user *_pu_addr @@ got char *buf @@
drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: expected char [noderef] __user *_pu_addr
drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: got char *buf
>> drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected char const [noderef] __user *_gu_addr @@ got char const *buf @@
drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: expected char const [noderef] __user *_gu_addr
drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: got char const *buf
The buffer buf is a failsafe buffer in kernel space, it's not user
memory hence doesn't deserve the use of get_user() or put_user().
Access 'buf' content directly.
Link: https://lore.kernel.org/lkml/202111190526.K5vb7NWC-lkp@intel.com/T/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/d14ed8d71ad4372e6839ae427f91441d3ba0e94d.1637946316.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ebe82cf92cd4825c3029434cabfcd2f1780e64be ]
Current I2C reset procedure is broken in two ways:
1) It only generate 1 START instead of 9 STARTs and STOP.
2) It leaves the bus Busy so every I2C xfer after the first
fixup calls the reset routine again, for every xfer there after.
This fixes both errors.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4ac0d249a5db80e79d573db9e4ad29354b643a8 ]
setup_profiling_timer() is only needed when CONFIG_PROFILING is enabled.
Fixes the following W=1 warning when CONFIG_PROFILING=n:
linux/arch/powerpc/kernel/smp.c:1638:5: error: no previous prototype for ‘setup_profiling_timer’
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-5-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit effa453168a7eeb8a562ff4edc1dbf9067360a61 ]
If an invalid block size is provided, reject it instead of silently
changing it to a supported value. Especially critical I see the case of
a write transfer with block length 0. In this case we have no guarantee
that the byte we would write is valid. When silently reducing a read to
32 bytes then we don't return an error and the caller may falsely
assume that we returned the full requested data.
If this change should break any (broken) caller, then I think we should
fix the caller.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a1d2b210ffa52d60acabbf7b6af3ef7e1e69cda0 ]
for_each_node_by_type performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
local idexpression n;
expression e;
@@
for_each_node_by_type(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-6-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a841fd009e51c8c0a8f07c942e9ab6bb48da8858 ]
for_each_node_by_name performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression e,e1;
local idexpression n;
@@
for_each_node_by_name(n, e1) {
... when != of_node_put(n)
when != e = n
(
return n;
|
+ of_node_put(n);
? return ...;
)
...
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-7-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d405a939ca960162eb30c1475759cb2fdf38f8c ]
for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
local idexpression n;
expression e;
@@
for_each_compatible_node(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-4-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f6e82647ff71d427d4148964b71f239fba9d7937 ]
for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression e;
local idexpression n;
@@
@@
local idexpression n;
expression e;
@@
for_each_compatible_node(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-2-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9e9d4b460f23bab61672eae397417d03917d116c ]
In handle_interruption(), we call faulthandler_disabled() to check whether the
fault handler is not disabled. If the fault handler is disabled, we immediately
call do_page_fault(). It then calls faulthandler_disabled(). If disabled,
do_page_fault() attempts to fixup the exception by jumping to no_context:
no_context:
if (!user_mode(regs) && fixup_exception(regs)) {
return;
}
parisc_terminate("Bad Address (null pointer deref?)", regs, code, address);
Apart from the error messages, the two blocks of code perform the same
function.
We can avoid two calls to faulthandler_disabled() by a simple revision
to the code in handle_interruption().
Note: I didn't try to fix the formatting of this code block.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 93a770b7e16772530196674ffc79bb13fa927dc6 ]
struct uart_port contains a cached copy of the Modem Control signals.
It is used to skip register writes in uart_update_mctrl() if the new
signal state equals the old signal state. It also avoids a register
read to obtain the current state of output signals.
When a uart_port is registered, uart_configure_port() changes signal
state but neglects to keep the cached copy in sync. That may cause
a subsequent register write to be incorrectly skipped. Fix it before
it trips somebody up.
This behavior has been present ever since the serial core was introduced
in 2002:
https://git.kernel.org/history/history/c/33c0d1b0c3eb
So far it was never an issue because the cached copy is initialized to 0
by kzalloc() and when uart_configure_port() is executed, at most DTR has
been set by uart_set_options() or sunsu_console_setup(). Therefore,
a stable designation seems unnecessary.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/bceeaba030b028ed810272d55d5fc6f3656ddddb.1641129752.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 08a0c6dff91c965e39905cf200d22db989203ccb ]
pl010_set_termios() briefly resets the CR register to zero.
Where does this register write come from?
The PL010 driver's IRQ handler ambauart_int() originally modified the CR
register without holding the port spinlock. ambauart_set_termios() also
modified that register. To prevent concurrent read-modify-writes by the
IRQ handler and to prevent transmission while changing baudrate,
ambauart_set_termios() had to disable interrupts. That is achieved by
writing zero to the CR register.
However in 2004 the PL010 driver was amended to acquire the port
spinlock in the IRQ handler, obviating the need to disable interrupts in
->set_termios():
https://git.kernel.org/history/history/c/157c0342e591
That rendered the CR register write obsolete. Drop it.
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/fcaff16e5b1abb4cc3da5a2879ac13f278b99ed0.1641128728.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cba23ac158db7f3cd48a923d6861bee2eb7a2978 ]
Corrupted metadata could warrant returning error from sm_ll_lookup_bitmap().
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 85bca3c05b6cca31625437eedf2060e846c4bbad ]
Corrupt metadata could trigger an out of bounds write.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7590fc6f80ac2cbf23e6b42b668bbeded070850b ]
On systems with large numbers of MDIO bus/muxes the message indicating
that a given MDIO bus has been successfully probed is repeated for as
many buses we have, which can eat up substantial boot time for no
reason, demote to a debug print.
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220103194024.2620-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9f05c09d6baef789726346397438cca4ec43c3ee ]
If we're looking for leafs that point to a data extent we want to record
the extent items that point at our bytenr. At this point we have the
reference and we know for a fact that this leaf should have a reference
to our bytenr. However if there's some sort of corruption we may not
find any references to our leaf, and thus could end up with eie == NULL.
Replace this BUG_ON() with an ASSERT() and then return -EUCLEAN for the
mortals.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
