summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-08ipv6: introdcue __ipv6_addr_needs_scope_id and ipv6_iface_scope_id helper ↵Hannes Frederic Sowa
functions __ipv6_addr_needs_scope_id checks if an ipv6 address needs to supply a 'sin6_scope_id != 0'. 'sin6_scope_id != 0' was enforced in case of link-local addresses. To support interface-local multicast these checks had to be enhanced and are now consolidated into these new helper functions. v2: a) migrated to struct ipv6_addr_props v3: a) reverted changes for ipv6_addr_props b) test for address type instead of comparing scope v4: a) unchanged Suggested-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08ipv6: ndisc: remove redundant check for !dev->addr_lenThomas Graf
send_sllao is already initialized with the value of dev->addr_len Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== This series contains updates to ixgbevf and e1000e. Alex's ixgbevf patch is meant to address several race issues that become possible because next_to_watch could possibly be set to a value that shows that the descriptor is done when it is not. In order to correct that we instead make next_to_watch a pointer that is set to NULL during cleanup, and set to the eop_desc after the descriptor rings have been written. Stephen's ixgbevf patch makes the PCI id table a const and reformats the table to match what the ixgbe driver does. The remaining 13 patches from Bruce are cleanup patches for e1000e to resolve checkpatch.pl warnings/errors, removing blank lines where necessary and fix code formatting. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08VSOCK: Split vm_sockets.h into kernel/uapiAndy King
Split the vSockets header into kernel and UAPI parts. The former gets the bits that used to be in __KERNEL__ guards, while the latter gets everything that is user-visible. Tested by compiling vsock (+transport) and a simple user-mode vSockets application. Reported-by: David Howells <dhowells@redhat.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08e1000e: cleanup - move defines to appropriate header fileBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-08e1000e: cleanup format of struct e1000_opt_list structBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-08e1000e: cleanup USLEEP_RANGE checkpatch checksBruce Allan
Resolve strict checkpatch USLEEP_RANGE checks by converting delays and sleeps as described in ./Documentation/timers/timers-howto.txt. Three other violations of the text have also been fixed. CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-08e1000e: cleanup unnecessary line breaksBruce Allan
Cuddle broken lines where appropriate. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-08e1000e: cleanup formatting of static structsBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-08e1000e: cleanup unusually placed commentsBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-08e1000e: cleanup (add/remove) blank lines where appropriateBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-08e1000e: cleanup SPACING checkpatch checksBruce Allan
CHECK:SPACING: No space is necessary after a cast CHECK:SPACING: space prohibited before semicolon Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-08e1000e: cleanup PARENTHESIS_ALIGNMENT checkpatch checksBruce Allan
CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-08e1000e: cleanup LEADING_SPACE checkpatch warningsBruce Allan
WARNING:LEADING_SPACE: please, no spaces at the start of a line Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-08e1000e: cleanup LONG_LINE checkpatch warningsBruce Allan
WARNING:LONG_LINE: line over 80 characters Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-08e1000e: cleanup SPACING checkpatch errors and warningsBruce Allan
ERROR:SPACING: spaces prohibited around that ':' (ctx:WxV) ERROR:SPACING: need consistent spacing around '-' (ctx:WxV) ERROR:SPACING: space required after that ',' (ctx:VxV) ERROR:SPACING: spaces required around that '=' (ctx:VxV) WARNING:SPACING: missing space after enum definition and some similar spacing issues not reported by checkpatch. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-08e1000e: cleanup CODE_INDENT checkpatch errorsBruce Allan
ERROR:CODE_INDENT: code indent should use tabs where possible Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-08ixgbevf: use PCI_DEVICE_TABLE macroStephen Hemminger
Makes PCI id table const. Reformat to match table in ixgbe_main.c Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-08ixgbevf: Make next_to_watch a pointer and adjust memory barriers to avoid racesAlexander Duyck
This change is meant to address several race issues that become possible because next_to_watch could possibly be set to a value that shows that the descriptor is done when it is not. In order to correct that we instead make next_to_watch a pointer that is set to NULL during cleanup, and set to the eop_desc after the descriptor rings have been written. To enforce proper ordering the next_to_watch pointer is not set until after a wmb writing the values to the last descriptor in a transmit. In order to guarantee that the descriptor is not read until after the eop_desc we use the read_barrier_depends which is only really necessary on the alpha architecture. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-07ipv6 flowlabel: add __rcu annotationsEric Dumazet
Commit 18367681a10b (ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.) omitted proper __rcu annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07bridge: use ipv4_is_local_multicast() helperAmerigo Wang
Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07bgmac: register MII busRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07be2net: Update copyright yearVasundhara Volam
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07CAIF: fix indentation for function argumentsSilviu-Mihai Popescu
This lines up function arguments on second and subsequent lines at the first column after the openning parenthesis of the first line. Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07tcp: uninline tcp_prequeue()Eric Dumazet
tcp_prequeue() became too big to be inlined. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07Merge branch 'tg3'David S. Miller
Nithin Nayak says: ==================== For the 57766 devices with no NVRAM, there is not enough space for the complete boot code with EEE support. On these devices, the tg3 driver has to download a service patch firmware to the scratchpad for the boot code to execute. This patchset adds support to do the above. A major portion of this patchset is refactoring the existing firmware download section to allow a cleaner merge of the 57766 download. The 57766 firmware differs from previous firmware in that it's not written to a contiguous area in memory. It consists of multiple fragments to be written to different locations. The patchset makes an attempt to make the new firmware format to be an extension of the existing format. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07tg3: Download 57766 EEE service patch firmwareNithin Sujir
This patch downloads the EEE service patch firmware and enables the necessary EEE flags. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07tg3: Enhance firmware download code to support fragmented firmwareNithin Sujir
This lays the ground work to download the 57766 fragmented firmware. We loop until we've written data equal to tp->fw->size minus headers. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07tg3: Cleanup firmware parsing codeNithin Sujir
The current firmware header parsing is complicated due to interpreting it as a u32 array and accessing header members via array offsets. Add tg3_firmware_hdr structure to access the firmware fields instead of hardcoding offsets. The same header format will be used for individual firmware fragments in the 57766. The fw_hdr and tg3 structures have all the information required for loading the fw. Remove the redundant fw_info structure and pass fw_hdr instead. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07tg3: Refactor the 2nd type of cpu pauseNithin Sujir
For completeness and consistency, add common function tg3_pause_cpu_and_set_pc(). This is only for existing fw and not used for the 57766. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07tg3: Refactor cpu pause/resume codeNithin Sujir
The 57766 rxcpu needs to be paused/resumed when we download the firmware just like we do for existing firmware. Refactor the pause/resume code to be reusable. This patch also renames the "offset" argument of tg3_halt_cpu to "cpu_base" since that's what it really is. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07tg3: Add new FW_TSO flagMatt Carlson
tg3 used the fw_needed member loosely as a synonym for firmware TSO. Now that the 57766 needs firmware download support, fw_needed can no longer be used like this. This patch creates a new FW_TSO flag and changes the code to use it. Also rearrange all the TSO flags together in the enum. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07Merge branch 'fdb'David S. Miller
Vlad Yasevich says: ==================== This is a short series that now allows mac filter programming on any card that support IFF_UNICAST_FLT by using the existing FDB interface. Some existing drivers that had FDB functionality usually supported it only in SR-IOV mode. Since that's not always enabled, and we want to take advantage of IFF_UNICAST_FLT support, these drivers have been converted to call the default handler when not in SRIOV mode. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07qlcnic: Use generic fdb handler when driver options are not enabled.Vlad Yasevich
Allow qlcnic to use the generic fdb handler when the driver options are not enabled. Untill the driver is fully fixed, this allows the use of the FDB interface with qlogic driver, but simply puts the driver into promisc mode since the driver currently does not support IFF_UNICAST_FLT. CC: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: linux-driver@qlogic.com Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07mlx4: Remove driver specific fdb handlers.Vlad Yasevich
Remove driver specific fdb hadlers since they are the same as the default ones. CC: Amir Vadai <amirv@mellanox.com> CC: Yan Burman <yanb@mellanox.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07ixgbe: Make use of the default fdb handlers.Vlad Yasevich
For fdb_add, use the default handler in the non-SRIOV case. For the other fdb handlers, just remove them and use the default ones. CC: John Fastabend <john.r.fastabend@intel.com> Acked-By: John Fastabend <john.r.fastabend@intel.com> CC: CC: Gregory Rose <gregory.v.rose@intel.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07net: generic fdb support for drivers without ndo_fdb_<op>Vlad Yasevich
If the driver does not support the ndo_op use the generic handler for it. This should work in the majority of cases. Eventually the fdb_dflt_add call gets translated into a __dev_set_rx_mode() call which should handle hardware support for filtering via the IFF_UNICAST_FLT flag. Namely IFF_UNICAST_FLT indicates if the hardware can do unicast address filtering. If no support is available the device is put into promisc mode. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06htb: add HTB_DIRECT_QLEN attributeEric Dumazet
HTB uses an internal pfifo queue, which limit is not reported to userland tools (tc), and value inherited from device tx_queue_len at setup time. Introduce TCA_HTB_DIRECT_QLEN attribute to allow finer control. Remove two obsolete pr_err() calls as well. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06r6040: check MDIO register busy waiting resultFlorian Fainelli
We are currently busy waiting for MDIO registers to complete their operation but we did not propagate the result back to the caller. Update r6040_phy_{read,write} to report the busy waiting result accordingly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06netconf: add the handler to dump entriesNicolas Dichtel
It's useful to be able to get the initial state of all entries. The patch adds the support for IPv4 and IPv6. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06team: introduce random modeJiri Pirko
As suggested by Eric Dumazet, allow user to select mode which chooses TX port randomly. Functionality should be more of less similar to round-robin mode with even lower overhead. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06team: introduce two default team_modeop functions and use them in modesJiri Pirko
No need to duplicate code for this. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-05bnx2x: use the default NAPI weightEric Dumazet
BQL (Byte Queue Limits) proper operation needs TX completion being serviced in a timely fashion. bnx2x uses a non standard NAPI poll weight, and thats not fair to other napi poll handlers, and even not reasonable. Use the default value instead. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-05net: introduce NAPI_POLL_WEIGHTEric Dumazet
Some drivers use a too big NAPI poll weight. This patch adds a NAPI_POLL_WEIGHT default value and issues an error message if a driver attempts to use a bigger weight. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-05tcp: ipv6: bind() use stronger condition for bind_conflictFlavio Leitner
We must try harder to get unique (addr, port) pairs when doing port autoselection for sockets with SO_REUSEADDR option set. This is a continuation of commit aacd9289af8b82f5fb01bcdd53d0e3406d1333c7 for IPv6. Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-05net: cs89x0: use module_platform_driver_probe()Jingoo Han
This patch uses module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-05net: macb: use module_platform_driver_probe()Jingoo Han
This patch uses module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-05net: at91_ether: use module_platform_driver_probe()Jingoo Han
This patch uses module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-05Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "Here are a few powerpc bits & fixes for rc1. A couple of str*cpy fixes, some fixes in handling the FSCR register on Power8 (controls the enabling of processor features), a 32-bit build fix and a couple more nits." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Set DSCR bit in FSCR setup powerpc: Add DSCR FSCR register bit definition powerpc: Fix setting FSCR for HV=0 and on secondary CPUs powerpc: Wireup the kcmp syscall to sys_ni powerpc: Remove unused BITOP_LE_SWIZZLE macro powerpc: Avoid link stack corruption in MMU on syscall entry path drivers/tty/hvc: Use strlcpy instead of strncpy powerpc/pseries/hvcserver: Fix strncpy buffer limit in location code powerpc: Fix compile of sha1-powerpc-asm.S on 32-bit
2013-03-05Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio hwrng fix from Rusty Russell: "Nasty side-effect of vmalloc'ing modules: their static vars cannot be put into scatterlists. Jens has a check queued for this, so it shouldn't happen again. We could fix this in virtio_rng, but it's actually far easier to just do it in the core" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: hw_random: make buffer usable in scatterlist.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 00:39:01 +0000