summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-16cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits.: pariscRusty Russell
Impact: cleanup, futureproof In fact, all cpumask ops will only be valid (in general) for bit numbers < nr_cpu_ids. So use that instead of NR_CPUS in various places. This is always safe: no cpu number can be >= nr_cpu_ids, and nr_cpu_ids is initialized to NR_CPUS at boot. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-03-16cpumask: arch_send_call_function_ipi_mask: pariscRusty Russell
We're weaning the core code off handing cpumask's around on-stack. This introduces arch_send_call_function_ipi_mask(), and by defining it, the old arch_send_call_function_ipi is defined by the core code. We also take the chance to change send_IPI_mask() and use the new for_each_cpu() iterator. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-15parisc: sba_iommu: fix build bug when CONFIG_PARISC_AGP=yKyle McMartin
CC drivers/parisc/sba_iommu.o drivers/parisc/sba_iommu.c:1373: error: expected identifier or '(' before '}' token make[2]: *** [drivers/parisc/sba_iommu.o] Error 1 make[1]: *** [drivers/parisc] Error 2 make: *** [drivers] Error 2 Don't know how this has gone missed for so long... clearly I need to do builds on my C8000 more often. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-15Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (23 commits) [ARM] Fix virtual to physical translation macro corner cases [ARM] update mach-types [ARM] 5421/1: ftrace: fix crash due to tracing of __naked functions MX1 fix include [ARM] 5419/1: ep93xx: fix build warnings about struct i2c_board_info [ARM] 5418/1: restore lr before leaving mcount ARM: OMAP: board-omap3beagle: set i2c-3 to 100kHz ARM: OMAP: Allow I2C bus driver to be compiled as a module ARM: OMAP: sched_clock() corrected ARM: OMAP: Fix compile error if pm.h is included [ARM] orion5x: pass dram mbus data to xor driver [ARM] S3C64XX: Fix s3c64xx_setrate_clksrc [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/irq.c [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/s3c6400-clock.c [ARM] S3C64XX: Fix USB host clock mux list [ARM] S3C64XX: Fix name of USB host clock. [ARM] S3C64XX: Rename IRQ_UHOST to IRQ_USBH [ARM] S3C64XX: Do gpiolib configuration earlier [ARM] S3C64XX: Staticise s3c64xx_init_irq_eint() [ARM] SMDK6410: Declare iodesc table static ...
2009-03-14Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Fix Xilinx SystemACE driver to handle empty CF slot block: fix memory leak in bio_clone() block: Add gfp_mask parameter to bio_integrity_clone()
2009-03-14Fix Xilinx SystemACE driver to handle empty CF slotGrant Likely
The SystemACE driver does not handle an empty CF slot gracefully. An empty CF slot ends up hanging the system. This patch adds a check for the CF state and stops trying to process requests if the slot is empty. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-14block: fix memory leak in bio_clone()Li Zefan
If bio_integrity_clone() fails, bio_clone() returns NULL without freeing the newly allocated bio. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-14block: Add gfp_mask parameter to bio_integrity_clone()un'ichi Nomura
Stricter gfp_mask might be required for clone allocation. For example, request-based dm may clone bio in interrupt context so it has to use GFP_ATOMIC. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-14Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Mark Eins: Fix configuration. MIPS: Fix TIF_32BIT undefined problem when seccomp is disabled
2009-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (31 commits) [SCSI] qla2xxx: Update version number to 8.03.00-k4. [SCSI] qla2xxx: Correct overwrite of pre-assigned init-control-block structure size. [SCSI] qla2xxx: Correct truncation in return-code status checking. [SCSI] qla2xxx: Correct vport delete bug. [SCSI] qla2xxx: Use correct value for max vport in LOOP topology. [SCSI] qla2xxx: Correct address range checking for option-rom updates. [SCSI] fcoe: Change fcoe receive thread nice value from 19 (lowest priority) to -20 [SCSI] fcoe: fix handling of pending queue, prevent out of order frames (v3) [SCSI] fcoe: Out of order tx frames was causing several check condition SCSI status [SCSI] fcoe: fix kfree(skb) [SCSI] fcoe: ETH_P_8021Q is already in if_ether and fcoe is not using it anyway [SCSI] libfc: do not change the fh_rx_id of a recevied frame [SCSI] fcoe: Correct fcoe_transports initialization vs. registration [SCSI] fcoe: Use setup_timer() and mod_timer() [SCSI] libfc, fcoe: Remove unnecessary cast by removing inline wrapper [SCSI] libfc, fcoe: Cleanup function formatting and minor typos [SCSI] libfc, fcoe: Fix kerneldoc comments [SCSI] libfc: Cleanup libfc_function_template comments [SCSI] libfc: check for err when recv and state is incorrect [SCSI] libfc: rename rp to rdata in fc_disc_new_target() ...
2009-03-14Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix: add workaround for Samsung DB-P70 libata: Keep shadow last_ctl up to date during resets sata_mv: fix MSI irq race condition
2009-03-14Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Fix the fix to Bugzilla #11061, when IPv6 isn't defined... SUNRPC: xprt_connect() don't abort the task if the transport isn't bound SUNRPC: Fix an Oops due to socket not set up yet... Bug 11061, NFS mounts dropped NFS: Handle -ESTALE error in access() NLM: Fix GRANT callback address comparison when IPv6 is enabled NLM: Shrink the IPv4-only version of nlm_cmp_addr() NFSv3: Fix posix ACL code NFS: Fix misparsing of nfsv4 fs_locations attribute (take 2) SUNRPC: Tighten up the task locking rules in __rpc_execute()
2009-03-14Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: Use xs->bucket to set xattr value outside ocfs2: Fix a bug found by sparse check. ocfs2: tweak to get the maximum inline data size with xattr ocfs2: reserve xattr block for new directory with inline data
2009-03-14Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (10978): Report tuning algorith correctly V4L/DVB (10977): STB6100 init fix, the call to stb6100_set_bandwidth needs an argument V4L/DVB (10976): Bug fix: For legacy applications stv0899 performs search only first time after insmod. V4L/DVB (10975): Bug: Use signed types, Offsets and range can be negative V4L/DVB (10974): Use Diseqc 3/3 mode to send data V4L/DVB (10972): zl10353: i2c_gate_ctrl bug fix V4L/DVB (10834): zoran: auto-select bt866 for AverMedia 6 Eyes V4L/DVB (10832): tvaudio: Avoid breakage with tda9874a V4L/DVB (10789): m5602-s5k4aa: Split up the initial sensor probe in chunks.
2009-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.29Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.29: parisc: update defconfigs parisc: define x->x mmio accessors parisc: dino: struct device - replace bus_id with dev_name(), dev_set_name() parisc: convert cpu_check_affinity to new cpumask api parisc: convert (read|write)bwlq to inlines parisc: fix use of new cpumask api in irq.c parisc: update parisc for new irq_desc parisc: update MAINTAINERS parisc: fix wrong assumption about bus->self parisc: fix 64bit build parisc: add braces around arguments in assembler macros parisc: fix dev_printk() compile warnings for accessing a device struct parisc: remove unused local out_putf label parisc: fix `struct pt_regs' declared inside parameter list warning parisc: fix section mismatch warnings parisc: remove klist iterators parisc: BUG_ON() cleanup
2009-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: save the returned value of dma_map_sg ide-floppy: do not map dataless cmds to an sg
2009-03-14vmscan: pgmoved should be cleared after updating recent_rotatedDaisuke Nishimura
pgmoved should be cleared after updating recent_rotated. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Rik van Riel <riel@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-14eCryptfs: don't encrypt file key with filename keyTyler Hicks
eCryptfs has file encryption keys (FEK), file encryption key encryption keys (FEKEK), and filename encryption keys (FNEK). The per-file FEK is encrypted with one or more FEKEKs and stored in the header of the encrypted file. I noticed that the FEK is also being encrypted by the FNEK. This is a problem if a user wants to use a different FNEK than their FEKEK, as their file contents will still be accessible with the FNEK. This is a minimalistic patch which prevents the FNEKs signatures from being copied to the inode signatures list. Ultimately, it keeps the FEK from being encrypted with a FNEK. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Acked-by: Dustin Kirkland <kirkland@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-14nommu: ramfs: don't leak pages when adding to page cache failsJohannes Weiner
When a ramfs nommu mapping is expanded, contiguous pages are allocated and added to the pagecache. The caller's reference is then passed on by moving whole pagevecs to the file lru list. If the page cache adding fails, make sure that the error path also moves the pagevec contents which might still contain up to PAGEVEC_SIZE successfully added pages, of which we would leak references otherwise. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Howells <dhowells@redhat.com> Cc: Enrik Berkhan <Enrik.Berkhan@ge.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-14nommu: ramfs: pages allocated to an inode's pagecache may get wrongly discardedEnrik Berkhan
The pages attached to a ramfs inode's pagecache by truncation from nothing - as done by SYSV SHM for example - may get discarded under memory pressure. The problem is that the pages are not marked dirty. Anything that creates data in an MMU-based ramfs will cause the pages holding that data will cause the set_page_dirty() aop to be called. For the NOMMU-based mmap, set_page_dirty() may be called by write(), but it won't be called by page-writing faults on writable mmaps, and it isn't called by ramfs_nommu_expand_for_mapping() when a file is being truncated from nothing to allocate a contiguous run. The solution is to mark the pages dirty at the point of allocation by the truncation code. Signed-off-by: Enrik Berkhan <Enrik.Berkhan@ge.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-13MIPS: Mark Eins: Fix configuration.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-13MIPS: Fix TIF_32BIT undefined problem when seccomp is disabledZhang Le
Signed-off-by: Zhang Le <r0bertz@gentoo.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-13ide: save the returned value of dma_map_sgFUJITA Tomonori
dma_map_sg could return a value different to 'nents' argument of dma_map_sg so the ide stack needs to save it for the later usage (e.g. for_each_sg). The ide stack also needs to save the original sg_nents value for pci_unmap_sg. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> [bart: backport to Linus' tree] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-13ide-floppy: do not map dataless cmds to an sgBorislav Petkov
since it fails the virt_to_page() translation check with DEBUG_VIRTUAL enabled. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> [bart: backport to Linus' tree] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-13ata_piix: add workaround for Samsung DB-P70Tejun Heo
Samsung DB-P70 somehow botched the first ICH9 SATA port. The board doesn't expose the first port but somehow SStatus reports link online while failing SRST protocol leading to repeated probe failures and thus long boot delay. Because the BIOS doesn't carry any identifying DMI information, the port can't be blacklisted safely. Fortunately, the controller does have subsystem vendor and ID set. It's unclear whether the subsystem IDs are used only for the board but it can be safely worked around by disabling SIDPR access and just using SRST works around the problem. Even when the workaround is triggered on an unaffected board the only side effect will be missing SCR access. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Joseph Jang <josephjang@gmail.com> Reported-by: Jonghyon Sohn <mrsohn@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-13libata: Keep shadow last_ctl up to date during resetsStuart MENEFY
libata keeps a shadow copy of the ATA CTL register (which is write only), and only writes to the hardware when the required value doesn't match the shadow. However this copy wasn't being maintained when performing reset functions. This could cause problems for the first operation after a reset when the correct value might not be written to the CTL register. This problem was observed when hotplugging a drive: the identify command was being issued with interrupts enabled, when they should have been disabled. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-13sata_mv: fix MSI irq race conditionMark Lord
Fix a (rare) race condition in mv_interrupt() when using MSI. The value of hpriv->main_irq_mask_addr can change on on the fly, and without this patch we could end up writing back a stale copy to the hardware. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-13V4L/DVB (10978): Report tuning algorith correctlyMatthias Schwarzzot
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13V4L/DVB (10977): STB6100 init fix, the call to stb6100_set_bandwidth needs ↵Hans Werner
an argument in Hz not kHz, and a comment incorrectly says MHz instead of Hz. I don't know if this caused real problems anywhere Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13V4L/DVB (10976): Bug fix: For legacy applications stv0899 performs search ↵Igor M. Liplianin
only first time after insmod. For legacy applications stv0899 performs search only first time after insmod due to not set DVBFE_ALGO_SEARCH_AGAIN bit Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13V4L/DVB (10975): Bug: Use signed types, Offsets and range can be negativeManu Abraham
Code simplification: use in kernel macros Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13V4L/DVB (10974): Use Diseqc 3/3 mode to send dataSigmund Augdal
Signed-off-by: Sigmund Augdal <sigmund@snap.tv> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13parisc: update defconfigsKyle McMartin
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: define x->x mmio accessorsKyle McMartin
Bloody inconsiderate driver writers... Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: dino: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: convert cpu_check_affinity to new cpumask apiKyle McMartin
cpumask arg to the affinity function is now const, sort that out through the irq_desc implementations. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: convert (read|write)bwlq to inlinesKyle McMartin
Kills the 'value computed but not used' due to leX_to_cpu. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: fix use of new cpumask api in irq.cKyle McMartin
cpumask api needs to take a pointer to irq_desc[cpu].affinity Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: update parisc for new irq_descMike Travis
Impact: cleanup, update to new cpumask API Irq_desc.affinity and irq_desc.pending_mask are now cpumask_var_t's so access to them should be using the new cpumask API. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: update MAINTAINERSGrant Grundler
Signed-off-By: Grant Grundler <grundler@parisc-linux.org> Reviewed-by: Matthew Wilcox <matthew@wil.cx> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: fix wrong assumption about bus->selfGrant Grundler
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> posted a patch series to linux-pci to fix a wrong assumption about pci_bus->self==NULL for all PCI host bus controllers. While PARISC platforms to not behave this way, I prefer to have the code consistent across architectures. The following patch replaces pci_bus->self with pci_bus->parent when used as a test to check for "root bus controller". Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: fix 64bit buildHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: add braces around arguments in assembler macrosHelge Deller
Add braces around the macro arguments, else for example "shl %r1, 5-3, %r2" would not expand to what you would assume. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: fix dev_printk() compile warnings for accessing a device structHelge Deller
Fix compile warnings: drivers/scsi/zalon.c: In function `zalon_probe': drivers/scsi/zalon.c:140: warning: passing arg 1 of `dev_driver_string' from incompatible pointer type drivers/scsi/zalon.c:140: warning: passing arg 1 of `dev_name' from incompatible pointer type Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: remove unused local out_putf labelHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: fix `struct pt_regs' declared inside parameter list warningHelge Deller
Fix those compile warnings: uaccess.h:244: warning: `struct pt_regs' declared inside parameter list uaccess.h:244: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: fix section mismatch warningsHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: remove klist iteratorsJames Bottomley
commit 11c3b5c3e08f4d855cbef52883c266b9ab9df879 Author: Greg Kroah-Hartman <gregkh@suse.de> Date: Tue Dec 16 12:24:56 2008 -0800 driver core: move klist_children into private structure Broke our parisc build pretty badly because we touch the klists directly in three cases (AGP, SBA and GSC). Although GregKH will revert this patch, there's no reason we should be using the iterators directly, we can just move to the standard device_for_each_child() API. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Helge Deller <deller@gmx.de> Tested-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: BUG_ON() cleanupHelge Deller
- convert a few "if (xx) BUG();" to BUG_ON(xx) - remove a few printk()s, as we get a backtrace with BUG_ON() anyway Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13V4L/DVB (10972): zl10353: i2c_gate_ctrl bug fixAntti Palosaari
zl10353 i2c-gate was always closed and due to that devices having tuner behind i2c-gate were broken. Add module configuration which allows disabling i2c-gate only when really needed. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 08:53:42 +0000