summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-05-01Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-04-30Update .gitignore to include include/linux/bounds.hTheodore Ts'o
(which is autogenerated by kbuild) Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ipv6: Compilation fix for compat MCAST_MSFILTER sockopts.
2008-04-30Fix dnotify/close raceAl Viro
We have a race between fcntl() and close() that can lead to dnotify_struct inserted into inode's list *after* the last descriptor had been gone from current->files. Since that's the only point where dnotify_struct gets evicted, we are screwed - it will stick around indefinitely. Even after struct file in question is gone and freed. Worse, we can trigger send_sigio() on it at any later point, which allows to send an arbitrary signal to arbitrary process if we manage to apply enough memory pressure to get the page that used to host that struct file and fill it with the right pattern... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30x86: Mark OPTIMIZE_INLINING brokenLinus Torvalds
So Ingo finally did figure out why UML broke with this option: UML passes gcc the -fno-unit-at-a-time flag, and apparently that wreaks havoc with gcc's inlining. We could turn off -fno-unit-at-a-time for UML for gcc4+ (which is what x86 does), but there's bad blood about this whole option, and it does show that the thing is just fragile as heck. So let tempers cool, and disable the thing, and we can revisit the decision later. Cc: Adrian Bunk <bunk@kernel.org> Cc: David Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes3 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes3: (21 commits) x86: numaq fix x86: 8K stacks by default x86: ioremap ram check fix x86: fix HT cpu booting on 32-bit x86: optimize inlining off x86: CONFIG_X86_ELAN fix x86: Kconfig fix x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range() x86: use defconfigs from x86/configs/* toshiba: use ioremap_cached revert: "x86: ioremap(), extend check to all RAM pages" x86: don't bother printing compat vdso address fix: x86: support for new UV apic x86: fix early-BUG message x86: iommu_sac_force can become static x86: add proper header for reboot_force x86 VISWS: build fix x86, voyager: fix ioremap_nocache() hpet: fix x86: unexport kmap_atomic_to_page ...
2008-04-30libertas: fix use-before-check violationHolger Schurig
According to Coverity (kudo's to Adrian Bunk), we had one use-before-check bug in libe libertas driver. This patch fixes this issue. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-30b43: Fix dual-PHY devicesMichael Buesch
This fixes operation of dual-PHY (A/B/G) devices. Do not anounce the A-PHY to mac80211, as that's not supported, yet. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-30mac80211: incorrect shift directionHarvey Harrison
Looks like 5d2cdcd4e85c5187db30a6b29f79fbbe59f39f78 ("mac80211: get a TKIP phase key from skb") got the shifts wrong. Noticed by sparse: net/mac80211/tkip.c:234:25: warning: right shift by bigger than source value net/mac80211/tkip.c:235:25: warning: right shift by bigger than source value net/mac80211/tkip.c:236:25: warning: right shift by bigger than source value Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-30mac80211: insert WDS peer after adding interfaceJohannes Berg
This reorders the open code so that WDS peer STA info entries are added after the corresponding interface is added to the driver so that driver callbacks aren't invoked out of order. Also make any master device startup fatal. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-30mac80211: don't allow invalid WDS peer addressesJohannes Berg
Rather than just disallowing the zero address, disallow all invalid ones. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-30mac80211: assign conf.beacon_control for meshJohannes Berg
Drivers can rightfully assume that they get a beacon_control if the beacon is set. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-30mac80211: use 4-byte mesh sequence numberLuis Carlos Cobo
This follows the new 802.11s/D2.0 draft. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: klist: fix coding style errors in klist.h and klist.c driver core: remove no longer used "struct class_device" pcmcia: remove pccard_sysfs_interface warnings devres: support addresses greater than an unsigned long via dev_ioremap kobject: do not copy vargs, just pass them around sysfs: sysfs_update_group stub for CONFIG_SYSFS=n DEBUGFS: Correct location of debugfs API documentation. driver core: warn about duplicate driver names on the same bus klist: implement klist_add_{after|before}() klist: implement KLIST_INIT() and DEFINE_KLIST() sysfs: Disallow truncation of files in sysfs
2008-04-30klist: fix coding style errors in klist.h and klist.cGreg Kroah-Hartman
Finally clean up the odd spacing in these files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30driver core: remove no longer used "struct class_device"Kay Sievers
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30pcmcia: remove pccard_sysfs_interface warningsDavid Brownell
Make the PCMCIA core stop using class_interface to hide socket attribute registration. This removes the associated section mismatch warnings, and helps get to the point where that mechanism can finally be removed. Simplify that attribute registration by using an attribute_group. This is a net shrink in object size. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30devres: support addresses greater than an unsigned long via dev_ioremapKumar Gala
Use a resource_size_t instead of unsigned long since some arch's are capable of having ioremap deal with addresses greater than the size of a unsigned long. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Cc: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30kobject: do not copy vargs, just pass them aroundKay Sievers
This prevents a few unneeded copies. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30sysfs: sysfs_update_group stub for CONFIG_SYSFS=nRandy Dunlap
scsi_transport_spi uses sysfs_update_group() when CONFIG_SYSFS=n, so provide a stub for it. next-20080423/drivers/scsi/scsi_transport_spi.c:1467: error: implicit declaration of function 'sysfs_update_group' make[3]: *** [drivers/scsi/scsi_transport_spi.o] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30DEBUGFS: Correct location of debugfs API documentation.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30driver core: warn about duplicate driver names on the same busStas Sergeev
Currently an attempt to register multiple drivers with the same name causes the stack trace with some cryptic error message. The attached patch adds the necessary check and the clear error message. Signed-off-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30klist: implement klist_add_{after|before}()Tejun Heo
Add klist_add_after() and klist_add_before() which puts a new node after and before an existing node, respectively. This is useful for callers which need to keep klist ordered. Note that synchronizing between simultaneous additions for ordering is the caller's responsibility. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30klist: implement KLIST_INIT() and DEFINE_KLIST()Tejun Heo
klist is missing static initializers and definition helper. Add them. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30sysfs: Disallow truncation of files in sysfsBen Hutchings
sysfs allows attribute files to be truncated, e.g. using ftruncate(), with the expected effect on their inode. For most attributes, this doesn't change the "real" size of the file i.e. how much can be read from it. However, the parameter validation for reading and writing binary attribute files is based on the inode size and not the size specified in the file's bin_attribute, so it can be broken by this. For example, if we try using dd to write to such a file: # pwd /sys/bus/pci/devices/0000:08:00.0 # ls -l config -rw-r--r-- 1 root root 4096 Feb 1 17:35 config # dd if=/dev/zero of=config bs=4 count=1 1+0 records in 1+0 records out # ls -l config -rw-r--r-- 1 root root 0 Feb 1 17:50 config # dd if=/dev/zero of=config bs=4 count=1 seek=128 dd: writing `config': No space left on device 1+0 records in 0+0 records out Also, after truncation to 0, parameter validation for read and write is disabled. Most bin_attribute read and write methods also validate the size and offset, but for some this will allow out-of-range access. This may be a security issue, though access to such files is often limited to root. In any case, the validation should remain for safety's sake!) This was previously reported in Bugzilla as bug 9867. sysfs should ignore size changes or else refuse them (by returning -EINVAL). This patch makes it ignore them. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30Fix ACPI vs proc_create_data() mismergeAlexey Dobriyan
acpi_device_dir() is NULL until all files are createst, so everyting is created in straight in /proc/ and creation code warns. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30ipv6: Compilation fix for compat MCAST_MSFILTER sockopts.Pavel Emelyanov
The last hunk from the commit dae50295 (ipv4/ipv6 compat: Fix SSM applications on 64bit kernels.) escaped from the compat_ipv6_setsockopt to the ipv6_getsockopt (I guess due to patch smartness wrt searching for context) thus breaking 32-bit and 64-bit-without-compat compilation. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-30x86: numaq fixIngo Molnar
do not override the existing pci-y rule when adding visws or numaq rules. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-30x86: 8K stacks by defaultIngo Molnar
Switch back to 8K stacks as the safer default. Out-of-memory situations are less problematic than silent and hard to debug stack corruption. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86: ioremap ram check fixAndres Salomon
bdd3cee2e4b7279457139058615ced6c2b41e7de (x86: ioremap(), extend check to all RAM pages) breaks OLPC's ioremap call. The ioremap that OLPC uses is: romsig = ioremap(0xffffffc0, 16); The commit that breaks it is basically: - for (pfn = phys_addr >> PAGE_SHIFT; pfn < max_pfn_mapped && - (pfn << PAGE_SHIFT) < last_addr; pfn++) { + for (pfn = phys_addr >> PAGE_SHIFT; + (pfn << PAGE_SHIFT) < last_addr; pfn++) { + Previously, the 'pfn < max_pfn_mapped' check would've caused us to not enter the loop. Removing that check means we loop infinitely. The reason for that is because pfn is 0xfffff, and last_addr is 0xffffffcf. The remaining check that is used to exit the loop is not sufficient; when pfn<<PAGE_SHIFT is 0xfffff000, that is less than 0xffffffcf; when we increment pfn and it overflows (pfn == 0x100000), pfn<<PAGE_SHIFT ends up being 0. That, of course, is less than last_addr. In effect, pfn<<PAGE_SHIFT is never lower than last_addr. The simple fix for this is to limit the last_addr check to the PAGE_MASK; a patch is below. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86: fix HT cpu booting on 32-bitHugh Dickins
Since recent smpboot 32/64-bit merge, my dual Xeon with HT has been booting only 2 of its 4 cpus (when running an i386 kernel; but x86_64 is okay). J.A. Magallón reports the same. native_cpu_up: bad cpu 2 native_cpu_up: bad cpu 3 The mach-default cpu_present_to_apicid() was just returning cpu number (2, 3) instead of apicid (6, 7): looks like we now need the x86_64 code even for the i386 case. Comparing with other versions of cpu_present_to_apicid(), it seems a good idea to include an NR_CPUS test too, since cpu_present() doesn't include that; but that wasn't a problem here, and may no problem at all. Prior to that smpboot merge, my Xeon booted the two HT siblings on one physical first, then the two siblings on the other physical after - when i386, but alternated them when x86_64. Since the merge, the x86_64 sequence is unchanged, but the i386 sequence is now like x86_64. I prefer this consistency, and I prefer the new sequence: booting with maxcpus=2 then uses the independent physicals without HT sharing. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86: optimize inlining offIngo Molnar
default to inline optimizing off. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86: CONFIG_X86_ELAN fixIngo Molnar
move the X86_CPU section out of the !X86_ELAN branch. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86: Kconfig fixIngo Molnar
Andrew noticed that OPTIMIZE_INLINING appeared in the toplevel menu - fix it. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ↵Suresh Siddha
ioremap_nocache() and pci_mmap_page_range() Use UC_MINUS for ioremap(), ioremap_nocache() instead of strong UC. Once all the X drivers move to ioremap_wc(), we can go back to strong UC semantics for ioremap() and ioremap_nocache(). To avoid attribute aliasing issues, pci_mmap_page_range() will also use UC_MINUS for default non write-combining mapping request. Next steps: a) change all the video drivers using ioremap() or ioremap_nocache() and adding WC MTTR using mttr_add() to ioremap_wc() b) for strict usage, we can go back to strong uc semantics for ioremap() and ioremap_nocache() after some grace period for completing step-a. c) user level X server needs to use the appropriate method for setting up WC mapping (like using resourceX_wc sysfs file instead of adding MTRR for WC and using /dev/mem or resourceX under /sys) Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86: use defconfigs from x86/configs/*Sam Ravnborg
Daniel Drake <dsd@gentoo.org> reported: In 2.6.23, if you unpacked a kernel source tarball and then ran "make menuconfig" you'd be presented with this message: # using defaults found in arch/i386/defconfig and the default options would be set. The same thing in 2.6.24 does not give you any "using defaults" message, and the default config options within menuconfig are rather blank (e.g. no PCI support). You can work around this by explicitly running "make defconfig" before menuconfig, but it would be nice to have the behaviour the way it was for 2.6.23 (and the way it still is for other archs). Fixed by adding a x86 specific defconfig list to Kconfig. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=10470 Tested-by: dsd@gentoo.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30toshiba: use ioremap_cachedAlan Cox
The switch of ioremap to default to uncached doesn't break this driver but it does needlessly slow it down as BIOS space is cachable and this driver is quite happy scanning cached ROM space. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30revert: "x86: ioremap(), extend check to all RAM pages"Ingo Molnar
Vegard Nossum reported a large (150 seconds) boot delay during bootup, and bisected it to "x86: ioremap(), extend check to all RAM pages" (commit bdd3cee2e4b). Revert this commit for now. Bisected-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86: don't bother printing compat vdso addressJeremy Fitzhardinge
The kernel prints the compat vdso address regardless of whether compat vdso mode is enabled or not, which is confusing. Given that this isn't very interesting information anyway, just remove the printk. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Gerhard Mack <gmack@innerfire.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30fix: x86: support for new UV apicAndi Kleen
Don't warn in read_apic_id() when preemptible but only one CPU online. Signed-off-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86: fix early-BUG messageVegard Nossum
The .asciz directive takes any number of strings, but each one is zero- terminated, and string pasting is not done as in C. That results in only the first line being output. Replace .asciz with multiple .ascii directives and terminate with .asciz. Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86: iommu_sac_force can become staticDmitri Vorobiev
The iommu_sac_force variable is needlessly defined global, and this patch makes it static. Additionally, this variable needs not be explicitly initialized. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86: add proper header for reboot_forceDmitri Vorobiev
This patch fixes one sparse warning by including the appropriate header for the reboot_force symbol. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86 VISWS: build fixIngo Molnar
the 'reboot_force' flag is a notion that non-PC subarchitectures do not have. also, unify the X86_BIOS_REBOOT option between 32-bit and 64-bit and get rid of a few unnecessary Kconfig and Makefile complications that way. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86, voyager: fix ioremap_nocache()Ingo Molnar
James Bottomley reported that the following commit: | commit 6371b495991debfd1417b17c2bc4f7d7bae05739 | Author: Ingo Molnar <mingo@elte.hu> | Date: Wed Jan 30 13:33:40 2008 +0100 | | x86: change ioremap() to default to uncached broke Voyager. James says: " it broke a class of voyager machines: those which rely on the quad interrupt controller (QIC). The precis of why they broke is because the QIC does IPIs (or CPIs in its terminology) via cache line interference: you interrupt a processor by moving a designated memory area to write exclusive in the cache (by simply writing to the line) and the CPU acks the interrupt by moving it back to read shared (by reading from it). That area, is, of course, mapped by ioremap, so reversing the ioremap semantics and adding the uncached bit completely breaks the QIC. " Sorry about that! Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30hpet: fixIngo Molnar
Al Viro pointed out that there's a missing readl() of timer->hpet_config, found by Sparse. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86: unexport kmap_atomic_to_pageAdrian Bunk
This patch removes the no longer used export of kmap_atomic_to_page. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30x86: remove Xgt_desc_structAdrian Bunk
The comment says it should have been removed in 2.6.25. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (179 commits) ACPI: Fix acpi_processor_idle and idle= boot parameters interaction acpi: fix section mismatch warning in pnpacpi intel_menlo: fix build warning ACPI: Cleanup: Remove unneeded, multiple local dummy variables ACPI: video - fix permissions on some proc entries ACPI: video - properly handle errors when registering proc elements ACPI: video - do not store invalid entries in attached_array list ACPI: re-name acpi_pm_ops to acpi_suspend_ops ACER_WMI/ASUS_LAPTOP: fix build bug thinkpad_acpi: fix possible NULL pointer dereference if kstrdup failed ACPI: check a return value correctly in acpi_power_get_context() #if 0 acpi/bay.c:eject_removable_drive() eeepc-laptop: add hwmon fan control eeepc-laptop: add backlight eeepc-laptop: add base driver ACPI: thinkpad-acpi: bump up version to 0.20 ACPI: thinkpad-acpi: fix selects in Kconfig ACPI: thinkpad-acpi: use a private workqueue ACPI: thinkpad-acpi: fluff really minor fix ACPI: thinkpad-acpi: use uppercase for "LED" on user documentation ... Fixed conflicts in drivers/acpi/video.c and drivers/misc/intel_menlow.c manually.
2008-04-30Merge branch 'pnp' into releaseLen Brown
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 18:26:34 +0000