summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-24KVM: PPC: Add tracepoints for generic spte flushesAlexander Graf
The different ways of flusing shadow ptes have their own debug prints which use stupid old printk. Let's move them to tracepoints, making them easier available, faster and possible to activate on demand Signed-off-by: Alexander Graf <agraf@suse.de>
2010-10-24KVM: PPC: Fix sid map search after flushAlexander Graf
After a flush the sid map contained lots of entries with 0 for their gvsid and hvsid value. Unfortunately, 0 can be a real value the guest searches for when looking up a vsid so it would incorrectly find the host's 0 hvsid mapping which doesn't belong to our sid space. So let's also check for the valid bit that indicated that the sid we're looking at actually contains useful data. Signed-off-by: Alexander Graf <agraf@suse.de>
2010-10-24KVM: PPC: Move pte invalidate debug code to tracepointAlexander Graf
This patch moves the SPTE flush debug printk over to tracepoints. Signed-off-by: Alexander Graf <agraf@suse.de>
2010-10-24KVM: PPC: Add tracepoint for generic mmu mapAlexander Graf
This patch moves the generic mmu map debugging over to tracepoints. Signed-off-by: Alexander Graf <agraf@suse.de>
2010-10-24KVM: PPC: Move book3s_64 mmu map debug print to trace pointAlexander Graf
This patch moves Book3s MMU debugging over to tracepoints. Signed-off-by: Alexander Graf <agraf@suse.de>
2010-10-24KVM: PPC: Move EXIT_DEBUG partially to tracepointsAlexander Graf
We have a debug printk on every exit that is usually #ifdef'ed out. Using tracepoints makes a lot more sense here though, as they can be dynamically enabled. This patch converts the most commonly used debug printks of EXIT_DEBUG to tracepoints. Signed-off-by: Alexander Graf <agraf@suse.de>
2010-10-24KVM: ia64: define kvm_lapic_enabled() to fix a compile errorTakuya Yoshikawa
The following patch commit 57ce1659316f4ca298919649f9b1b55862ac3826 KVM: x86: In DM_LOWEST, only deliver interrupts to vcpus with enabled LAPIC's ignored the fact that kvm_irq_delivery_to_apic() was also used by ia64. We define kvm_lapic_enabled() to fix a compile error caused by this. This will have the same effect as reverting the problematic patch for ia64. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: lower the aduit frequencyXiao Guangrong
The audit is very high overhead, so we need lower the frequency to assure the guest is running. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: improve spte auditXiao Guangrong
Both audit_mappings() and audit_sptes_have_rmaps() need to walk vcpu's page table, so we can do these checking in a spte walking Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: improve active sp auditXiao Guangrong
Both audit_rmap() and audit_write_protection() need to walk all active sp, so we can do these checking in a sp walking Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: move audit to a separate fileXiao Guangrong
Move the audit code from arch/x86/kvm/mmu.c to arch/x86/kvm/mmu_audit.c Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: support disable/enable mmu audit dynamiclyXiao Guangrong
Add a r/w module parameter named 'mmu_audit', it can control audit enable/disable: enable: echo 1 > /sys/module/kvm/parameters/mmu_audit disable: echo 0 > /sys/module/kvm/parameters/mmu_audit This patch not change the logic Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: Fix guest kernel crash on MSR_K7_CLK_CTLJes Sorensen
MSR_K7_CLK_CTL is a no longer documented MSR, which is only relevant on said old AMD CPU models. This change returns the expected value, which the Linux kernel is expecting to avoid writing back the MSR, plus it ignores all writes to the MSR. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: i8259: Make ICW1 conform to specAvi Kivity
ICW is not a full reset, instead it resets a limited number of registers in the PIC. Change ICW1 emulation to only reset those registers. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: x86 emulator: clean up control flow in x86_emulate_insn()Avi Kivity
x86_emulate_insn() is full of things like if (rc != X86EMUL_CONTINUE) goto done; break; consolidate all of those at the end of the switch statement. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: x86 emulator: fix group 11 decoding for reg != 0Avi Kivity
These are all undefined. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: x86 emulator: use single stage decoding for mov instructionsAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: Don't save/restore MSR_IA32_PERF_STATUSAvi Kivity
It is read/only; restoring it only results in annoying messages. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: SVM: init_vmcb should reset vcpu->eferMarcelo Tosatti
Otherwise EFER_LMA bit is retained across a SIPI reset. Fixes guest cpu onlining. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: SVM: reset mmu context in init_vmcbMarcelo Tosatti
Since commit aad827034e419fa no mmu reinitialization is performed via init_vmcb. Zero vcpu->arch.cr0 and pass the reset value as a parameter to kvm_set_cr0. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: Fix pio trace directionAvi Kivity
out = write, in = read, not the other way round. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: remove count_rmaps()Xiao Guangrong
Nothing is checked in count_rmaps(), so remove it Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: rewrite audit_mappings_page() functionXiao Guangrong
There is a bugs in this function, we call gfn_to_pfn() and kvm_mmu_gva_to_gpa_read() in atomic context(kvm_mmu_audit() is called under the spinlock(mmu_lock)'s protection). This patch fix it by: - introduce gfn_to_pfn_atomic instead of gfn_to_pfn - get the mapping gfn from kvm_mmu_page_get_gfn() And it adds 'notrap' ptes check in unsync/direct sps Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: fix wrong not write protected sp reportXiao Guangrong
The audit code reports some sp not write protected in current code, it's just the bug in audit_write_protection(), since: - the invalid sp not need write protected - using uninitialize local variable('gfn') - call kvm_mmu_audit() out of mmu_lock's protection Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: check rmap for every spteXiao Guangrong
The read-only spte also has reverse mapping, so fix the code to check them, also modify the function name to fit its doing Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: fix compile warning in audit codeXiao Guangrong
fix: arch/x86/kvm/mmu.c: In function ‘kvm_mmu_unprotect_page’: arch/x86/kvm/mmu.c:1741: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’ arch/x86/kvm/mmu.c:1745: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’ arch/x86/kvm/mmu.c: In function ‘mmu_unshadow’: arch/x86/kvm/mmu.c:1761: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’ arch/x86/kvm/mmu.c: In function ‘set_spte’: arch/x86/kvm/mmu.c:2005: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’ arch/x86/kvm/mmu.c: In function ‘mmu_set_spte’: arch/x86/kvm/mmu.c:2033: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 7 has type ‘gfn_t’ Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: pit: Do not check pending pit timer in vcpu threadJason Wang
Pit interrupt injection was done by workqueue, so no need to check pending pit timer in vcpu thread which could lead unnecessary unblocking of vcpu. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: PPC: Fix CONFIG_KVM_GUEST && !CONFIG_KVM caseAlexander Graf
When CONFIG_KVM_GUEST is selected, but CONFIG_KVM is not, we were missing some defines in asm-offsets.c and included too many headers at other places. This patch makes above configuration work. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: x86 emulator: simplify ALU opcode block decode furtherAvi Kivity
The ALU opcode block is very regular; introduce D6ALU() to define decode flags for 6 instructions at a time. Suggested by Paolo Bonzini. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: Fix build error due to 64-bit division in nsec_to_cycles()Avi Kivity
Use do_div() instead. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: trap and propagate #DE from DIV and IDIVAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: add macros for executing instructions that may trapAvi Kivity
Like DIV and IDIV. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: simplify instruction decode flags for opcodes 0F 00-FFAvi Kivity
Use the new byte/word dual opcode decode. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: simplify instruction decode flags for opcodes E0-FFAvi Kivity
Use the new byte/word dual opcode decode. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: simplify instruction decode flags for opcodes C0-DFAvi Kivity
Use the new byte/word dual opcode decode. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: simplify instruction decode flags for opcodes A0-AFAvi Kivity
Use the new byte/word dual opcode decode. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: simplify instruction decode flags for opcodes 80-8FAvi Kivity
Use the new byte/word dual opcode decode. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: simplify string instruction decode flagsAvi Kivity
Use the new byte/word dual opcode decode. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: simplify ALU block (opcodes 00-3F) decode flagsAvi Kivity
Use the new byte/word dual opcode decode. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: support byte/word opcode pairsAvi Kivity
Many x86 instructions come in byte and word variants distinguished with bit 0 of the opcode. Add macros to aid in defining them. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: refuse SrcMemFAddr (e.g. LDS) with register operandAvi Kivity
SrcMemFAddr is not defined with the modrm operand designating a register instead of a memory address. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: get rid of "restart" in emulation context.Gleb Natapov
x86_emulate_insn() will return 1 if instruction can be restarted without re-entering a guest. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: move string instruction completion check into separate ↵Gleb Natapov
function Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: Rename variable that shadows another local variable.Gleb Natapov
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: add CALL FAR instruction emulation (opcode 9a)Wei Yongjun
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: S390: Export kvm_virtio.hAlexander Graf
As suggested by Christian, we should expose headers to user space with information that might be valuable there. The s390 virtio interface is one of those cases. It defines an ABI between hypervisor and guest, so it should be exposed to user space. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: S390: Add virtio hotplug add supportAlexander Graf
The one big missing feature in s390-virtio was hotplugging. This is no more. This patch implements hotplug add support, so you can on the fly add new devices in the guest. Keep in mind that this needs a patch for qemu to actually leverage the functionality. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: S390: take a full byte as ext_param indicatorAlexander Graf
Currenty the ext_param field only distinguishes between "config change" and "vring interrupt". We can do a lot more with it though, so let's enable a full byte of possible values and constants to #defines while at it. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: MMU: combine guest pte read between fetch and pte prefetchXiao Guangrong
Combine guest pte read between guest pte check in the fetch path and pte prefetch Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: MMU: prefetch ptes when intercepted guest #PFXiao Guangrong
Support prefetch ptes when intercept guest #PF, avoid to #PF by later access If we meet any failure in the prefetch path, we will exit it and not try other ptes to avoid become heavy path Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-20 23:40:52 +0000