summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-04-13ipsec: check return value of skb_to_sgvec alwaysJason A. Donenfeld
commit 3f29770723fe498a5c5f57c3a31a996ebdde03e1 upstream. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> [natechancellor: Adjusted context due to lack of fca11ebde3f0] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13perf tools: Fix copyfile_offset update of output offsetJiri Olsa
[ Upstream commit fa1195ccc0af2d121abe0fe266a1caee8c265eea ] We need to increase output offset in each iteration, not decrease it as we currently do. I guess we were lucky to finish in most cases in first iteration, so the bug never showed. However it shows a lot when working with big (~4GB) size data. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 9c9f5a2f1944 ("perf tools: Introduce copyfile_offset() function") Link: http://lkml.kernel.org/r/20180109133923.25406-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13cxgb4vf: Fix SGE FL buffer initialization logic for 64K pagesArjun Vynipadath
[ Upstream commit ea0a42109aee7b92e631c4eb3f2219fadf58acdd ] We'd come in with SGE_FL_BUFFER_SIZE[0] and [1] both equal to 64KB and the extant logic would flag that as an error. This was already fixed in cxgb4 driver with "92ddcc7 cxgb4: Fix some small bugs in t4_sge_init_soft() when our Page Size is 64KB". Original Work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13EDAC, mv64x60: Fix an error handling pathChristophe JAILLET
[ Upstream commit 68fa24f9121c04ef146b5158f538c8b32f285be5 ] We should not call edac_mc_del_mc() if a corresponding call to edac_mc_add_mc() has not been performed yet. So here, we should go to err instead of err2 to branch at the right place of the error handling path. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180107205400.14068-1-christophe.jaillet@wanadoo.fr Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13tty: n_gsm: Allow ADM response in addition to UA for control dlciTony Lindgren
[ Upstream commit ea3d8465ab9b3e01be329ac5195970a84bef76c5 ] Some devices have the control dlci stay in ADM mode instead of the UA mode. This can seen at least on droid 4 when trying to open the ts 27.010 mux port. Enabling n_gsm debug mode shows the control dlci always respond with DM to SABM instead of UA: # modprobe n_gsm debug=0xff # ldattach -d GSM0710 /dev/ttyS0 & gsmld_output: 00000000: f9 03 3f 01 1c f9 --> 0) C: SABM(P) gsmld_receive: 00000000: f9 03 1f 01 36 f9 <-- 0) C: DM(P) ... $ minicom -D /dev/gsmtty1 minicom: cannot open /dev/gsmtty1: No error information $ strace minicom -D /dev/gsmtty1 ... open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT Note that this is different issue from other n_gsm -EL2HLT issues such as timeouts when the control dlci does not respond at all. The ADM mode seems to be a quite common according to "RF Wireless World" article "GSM Issue-UE sends SABM and gets a DM response instead of UA response": This issue is most commonly observed in GSM networks where in UE sends SABM and expects network to send UA response but it ends up receiving DM response from the network. SABM stands for Set asynchronous balanced mode, UA stands for Unnumbered Acknowledge and DA stands for Disconnected Mode. An RLP entity can be in one of two modes: - Asynchronous Balanced Mode (ABM) - Asynchronous Disconnected Mode (ADM) Currently Linux kernel closes the control dlci after several retries in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce error code -EL2HLT when trying to open them as the closing of control dlci has already set gsm->dead. Let's fix the issue by allowing control dlci stay in ADM mode after the retries so the /dev/gsmtty ports can be opened and used. It seems that it might take several attempts to get any response from the control dlci, so it's best to allow ADM mode only after the SABM retries are done. Note that for droid 4 additional patches are needed to mux the ttyS0 pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also needed to use n_gsm. And the mdm6600 modem needs to be powered on. Cc: linux-serial@vger.kernel.org Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: Jiri Prchal <jiri.prchal@aksignal.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Russ Gorby <russ.gorby@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13blk-mq: fix kernel oops in blk_mq_tag_idle()Ming Lei
[ Upstream commit 8ab0b7dc73e1b3e2987d42554b2bff503f692772 ] HW queues may be unmapped in some cases, such as blk_mq_update_nr_hw_queues(), then we need to check it before calling blk_mq_tag_idle(), otherwise the following kernel oops can be triggered, so fix it by checking if the hw queue is unmapped since it doesn't make sense to idle the tags any more after hw queues are unmapped. [ 440.771298] Workqueue: nvme-wq nvme_rdma_del_ctrl_work [nvme_rdma] [ 440.779104] task: ffff894bae755ee0 ti: ffff893bf9bc8000 task.ti: ffff893bf9bc8000 [ 440.788359] RIP: 0010:[<ffffffffb730e2b4>] [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40 [ 440.798697] RSP: 0018:ffff893bf9bcbd10 EFLAGS: 00010286 [ 440.805538] RAX: 0000000000000000 RBX: ffff895bb131dc00 RCX: 000000000000011f [ 440.814426] RDX: 00000000ffffffff RSI: 0000000000000120 RDI: ffff895bb131dc00 [ 440.823301] RBP: ffff893bf9bcbd10 R08: 000000000001b860 R09: 4a51d361c00c0000 [ 440.832193] R10: b5907f32b4cc7003 R11: ffffd6cabfb57000 R12: ffff894bafd1e008 [ 440.841091] R13: 0000000000000001 R14: ffff895baf770000 R15: 0000000000000080 [ 440.849988] FS: 0000000000000000(0000) GS:ffff894bbdcc0000(0000) knlGS:0000000000000000 [ 440.859955] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 440.867274] CR2: 0000000000000008 CR3: 000000103d098000 CR4: 00000000001407e0 [ 440.876169] Call Trace: [ 440.879818] [<ffffffffb7309d68>] blk_mq_exit_hctx+0xd8/0xe0 [ 440.887051] [<ffffffffb730dc40>] blk_mq_free_queue+0xf0/0x160 [ 440.894465] [<ffffffffb72ff679>] blk_cleanup_queue+0xd9/0x150 [ 440.901881] [<ffffffffc08a802b>] nvme_ns_remove+0x5b/0xb0 [nvme_core] [ 440.910068] [<ffffffffc08a811b>] nvme_remove_namespaces+0x3b/0x60 [nvme_core] [ 440.919026] [<ffffffffc08b817b>] __nvme_rdma_remove_ctrl+0x2b/0xb0 [nvme_rdma] [ 440.928079] [<ffffffffc08b8237>] nvme_rdma_del_ctrl_work+0x17/0x20 [nvme_rdma] [ 440.937126] [<ffffffffb70ab58a>] process_one_work+0x17a/0x440 [ 440.944517] [<ffffffffb70ac3a8>] worker_thread+0x278/0x3c0 [ 440.951607] [<ffffffffb70ac130>] ? manage_workers.isra.24+0x2a0/0x2a0 [ 440.959760] [<ffffffffb70b352f>] kthread+0xcf/0xe0 [ 440.966055] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40 [ 440.973715] [<ffffffffb76d8658>] ret_from_fork+0x58/0x90 [ 440.980586] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40 [ 440.988229] Code: 5b 41 5c 5d c3 66 90 0f 1f 44 00 00 48 8b 87 20 01 00 00 f0 0f ba 77 40 01 19 d2 85 d2 75 08 c3 0f 1f 80 00 00 00 00 55 48 89 e5 <f0> ff 48 08 48 8d 78 10 e8 7f 0f 05 00 5d c3 0f 1f 00 66 2e 0f [ 441.011620] RIP [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40 [ 441.019301] RSP <ffff893bf9bcbd10> [ 441.024052] CR2: 0000000000000008 Reported-by: Zhang Yi <yizhan@redhat.com> Tested-by: Zhang Yi <yizhan@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13scsi: libsas: initialize sas_phy status according to response of DISCOVERchenxiang
[ Upstream commit affc67788fe5dfffad5cda3d461db5cf2b2ff2b0 ] The status of SAS PHY is in sas_phy->enabled. There is an issue that the status of a remote SAS PHY may be initialized incorrectly: if disable remote SAS PHY through sysfs interface (such as echo 0 > /sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we will find the status of remote SAS PHY which is disabled before is 1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of remote SAS PHY is disabled and the device attached is not found. In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled according to the value of NEGOTIATED LOGICAL LINK RATE field. Signed-off-by: chenxiang <chenxiang66@hisilicon.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13scsi: libsas: fix error when getting phy eventsJason Yan
[ Upstream commit 2b23d9509fd7174b362482cf5f3b5f9a2265bc33 ] The intend purpose here was to goto out if smp_execute_task() returned error. Obviously something got screwed up. We will never get these link error statistics below: ~:/sys/class/sas_phy/phy-1:0:12 # cat invalid_dword_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat running_disparity_error_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat loss_of_dword_sync_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat phy_reset_problem_count 0 Obviously we should goto error handler if smp_execute_task() returns non-zero. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: chenqilin <chenqilin2@huawei.com> CC: chenxiang <chenxiang66@hisilicon.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13scsi: libsas: fix memory leak in sas_smp_get_phy_events()Jason Yan
[ Upstream commit 4a491b1ab11ca0556d2fda1ff1301e862a2d44c4 ] We've got a memory leak with the following producer: while true; do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null; done The buffer req is allocated and not freed after we return. Fix it. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: chenqilin <chenqilin2@huawei.com> CC: chenxiang <chenxiang66@hisilicon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13bcache: segregate flash only volume write streamsTang Junhui
[ Upstream commit 4eca1cb28d8b0574ca4f1f48e9331c5f852d43b9 ] In such scenario that there are some flash only volumes , and some cached devices, when many tasks request these devices in writeback mode, the write IOs may fall to the same bucket as bellow: | cached data | flash data | cached data | cached data| flash data| then after writeback of these cached devices, the bucket would be like bellow bucket: | free | flash data | free | free | flash data | So, there are many free space in this bucket, but since data of flash only volumes still exists, so this bucket cannot be reclaimable, which would cause waste of bucket space. In this patch, we segregate flash only volume write streams from cached devices, so data from flash only volumes and cached devices can store in different buckets. Compare to v1 patch, this patch do not add a additionally open bucket list, and it is try best to segregate flash only volume write streams from cached devices, sectors of flash only volumes may still be mixed with dirty sectors of cached device, but the number is very small. [mlyle: fixed commit log formatting, permissions, line endings] Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13bcache: stop writeback thread after detachingTang Junhui
[ Upstream commit 8d29c4426b9f8afaccf28de414fde8a722b35fdf ] Currently, when a cached device detaching from cache, writeback thread is not stopped, and writeback_rate_update work is not canceled. For example, after the following command: echo 1 >/sys/block/sdb/bcache/detach you can still see the writeback thread. Then you attach the device to the cache again, bcache will create another writeback thread, for example, after below command: echo ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach then you will see 2 writeback threads. This patch stops writeback thread and cancels writeback_rate_update work when cached device detaching from cache. Compare with patch v1, this v2 patch moves code down into the register lock for safety in case of any future changes as Coly and Mike suggested. [edit by mlyle: commit log spelling/formatting] Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13vxlan: dont migrate permanent fdb entries during learnRoopa Prabhu
[ Upstream commit e0090a9e979de5202c7d16c635dea2f005221073 ] This patch fixes vxlan_snoop to not move permanent fdb entries on learn events. This is consistent with the bridge fdb handling of permanent entries. Fixes: 26a41ae60438 ("vxlan: only migrate dynamic FDB entries") Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13s390/dasd: fix hanging safe offlineStefan Haberland
[ Upstream commit e8ac01555d9e464249e8bb122337d6d6e5589ccc ] The safe offline processing may hang forever because it waits for I/O which can not be started because of the offline flag that prevents new I/O from being started. Allow I/O to be started during safe offline processing because in this special case we take care that the queues are empty before throwing away the device. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13ACPICA: Disassembler: Abort on an invalid/unknown AML opcodeBob Moore
[ Upstream commit 6f0527b77d9e0129dd8e50945b0d610ed943d6b2 ] ACPICA commit ed0389cb11a61e63c568ac1f67948fc6a7bd1aeb An invalid opcode indicates something seriously wrong with the input AML file. The AML parser is immediately confused and lost, causing the resulting parse tree to be ill-formed. The actual disassembly can then cause numerous unrelated errors and faults. This change aborts the disassembly upon discovery of such an opcode during the AML parse phase. Link: https://github.com/acpica/acpica/commit/ed0389cb Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13ACPICA: Events: Add runtime stub support for event APIsLv Zheng
[ Upstream commit 861ba6351c520328e94a78c923b415faa9116287 ] ACPICA commit 99bc3beca92c6574ea1d69de42e54f872e6373ce It is reported that on Linux, RTC driver complains wrong errors on hardware reduced platform: [ 4.085420] ACPI Warning: Could not enable fixed event - real_time_clock (4) (20160422/evxface-654) This patch fixes this by correctly adding runtime reduced hardware check. Reported by Chandan Tagore, fixed by Lv Zheng. Link: https://github.com/acpica/acpica/commit/99bc3bec Tested-by: Chandan Tagore <tagore.chandan@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13cpuidle: dt: Add missing 'of_node_put()'Christophe Jaillet
[ Upstream commit b2cdd8e1b54849477a32d820acc2e87828a38f3d ] 'of_node_put()' should be called on pointer returned by 'of_parse_phandle()' when done. In this function this is done in all path except this 'continue', so add it. Fixes: 97735da074fd (drivers: cpuidle: Add status property to ARM idle states) Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13Bluetooth: Send HCI Set Event Mask Page 2 command only when neededMarcel Holtmann
[ Upstream commit 313f6888c8fbb1bc8b36c9012ce4e1de848df696 ] The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices report support for the Set Event Mask Page 2 command, but actually do return an error when trying to use it. < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 162 entries ... Set Event Mask Page 2 (Octet 22 - Bit 2) ... < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 Mask: 0x0000000000000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask Page 2 (0x03|0x0063) ncmd 1 Status: Unknown HCI Command (0x01) Since these controllers do not support any feature that would require the event mask page 2 to be modified, it is safe to not send this command at all. The default value is all bits set to zero. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=F82FA8E8CFC0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13iio: magnetometer: st_magn_spi: fix spi_device_id tableLorenzo Bianconi
[ Upstream commit c83761ff0aac954aa368c623bb0f0d1a3214e834 ] Remove LSM303DLHC, LSM303DLM from st_magn_id_table since LSM303DL series does not support spi interface Fixes: 872e79add756 (iio: magn: Add STMicroelectronics magn driver) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13sparc64: ldc abort during vds iso bootJag Raman
[ Upstream commit 6c95483b768c62f8ee933ae08a1bdbcb78b5410f ] Orabug: 20902628 When an ldc control-only packet is received during data exchange in read_nonraw(), a new rx head is calculated but the rx queue head is not actually advanced (rx_set_head() is not called) and a branch is taken to 'no_data' at which point two things can happen depending on the value of the newly calculated rx head and the current rx tail: - If the rx queue is determined to be not empty, then the wrong packet is picked up. - If the rx queue is determined to be empty, then a read error (EAGAIN) is eventually returned since it is falsely assumed that more data was expected. The fix is to update the rx head and return in case of a control only packet during data exchange. Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Aaron Young <aaron.young@oracle.com> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13sctp: fix recursive locking warning in sctp_do_peeloffXin Long
[ Upstream commit 6dfe4b97e08ec3d1a593fdaca099f0ef0a3a19e6 ] Dmitry got the following recursive locking report while running syzkaller fuzzer, the Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:52 print_deadlock_bug kernel/locking/lockdep.c:1729 [inline] check_deadlock kernel/locking/lockdep.c:1773 [inline] validate_chain kernel/locking/lockdep.c:2251 [inline] __lock_acquire+0xef2/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 lock_sock_nested+0xcb/0x120 net/core/sock.c:2536 lock_sock include/net/sock.h:1460 [inline] sctp_close+0xcd/0x9d0 net/sctp/socket.c:1497 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:432 sock_release+0x8d/0x1e0 net/socket.c:597 __sock_create+0x38b/0x870 net/socket.c:1226 sock_create+0x7f/0xa0 net/socket.c:1237 sctp_do_peeloff+0x1a2/0x440 net/sctp/socket.c:4879 sctp_getsockopt_peeloff net/sctp/socket.c:4914 [inline] sctp_getsockopt+0x111a/0x67e0 net/sctp/socket.c:6628 sock_common_getsockopt+0x95/0xd0 net/core/sock.c:2690 SYSC_getsockopt net/socket.c:1817 [inline] SyS_getsockopt+0x240/0x380 net/socket.c:1799 entry_SYSCALL_64_fastpath+0x1f/0xc2 This warning is caused by the lock held by sctp_getsockopt() is on one socket, while the other lock that sctp_close() is getting later is on the newly created (which failed) socket during peeloff operation. This patch is to avoid this warning by use lock_sock with subclass SINGLE_DEPTH_NESTING as Wang Cong and Marcelo's suggestion. Reported-by: Dmitry Vyukov <dvyukov@google.com> Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13bnx2x: Allow vfs to disable txvlan offloadMintz, Yuval
[ Upstream commit 92f85f05caa51d844af6ea14ffbc7a786446a644 ] VF clients are configured as enforced, meaning firmware is validating the correctness of their ethertype/vid during transmission. Once txvlan is disabled, VF would start getting SKBs for transmission here vlan is on the payload - but it'll pass the packet's ethertype instead of the vid, leading to firmware declaring it as malicious. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13xen: avoid type warning in xchg_xen_ulongArnd Bergmann
[ Upstream commit 9cc91f212111cdcbefa02dcdb7dd443f224bf52c ] The improved type-checking version of container_of() triggers a warning for xchg_xen_ulong, pointing out that 'xen_ulong_t' is unsigned, but atomic64_t contains a signed value: drivers/xen/events/events_2l.c: In function 'evtchn_2l_handle_events': drivers/xen/events/events_2l.c:187:1020: error: call to '__compiletime_assert_187' declared with attribute error: pointer type mismatch in container_of() This adds a cast to work around the warning. Cc: Ian Abbott <abbotti@mev.co.uk> Fixes: 85323a991d40 ("xen: arm: mandate EABI and use generic atomic operations.") Fixes: daa2ac80834d ("kernel.h: handle pointers to arrays better in container_of()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Acked-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13skbuff: only inherit relevant tx_flagsWillem de Bruijn
[ Upstream commit fff88030b3ff930ca7a3d74acfee0472f33887ea ] When inheriting tx_flags from one skbuff to another, always apply a mask to avoid overwriting unrelated other bits in the field. The two SKBTX_SHARED_FRAG cases clears all other bits. In practice, tx_flags are zero at this point now. But this is fragile. Timestamp flags are set, for instance, if in tcp_gso_segment, after this clear in skb_segment. The SKBTX_ANY_TSTAMP mask in __skb_tstamp_tx ensures that new skbs do not accidentally inherit flags such as SKBTX_SHARED_FRAG. Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13perf tests: Decompress kernel module before objdumpNamhyung Kim
[ Upstream commit 94df1040b1e6aacd8dec0ba3c61d7e77cd695f26 ] If a kernel modules is compressed, it should be decompressed before running objdump to parse binary data correctly. This fixes a failure of object code reading test for me. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net: emac: fix reset timeout with AR8035 phyChristian Lamparter
[ Upstream commit 19d90ece81da802207a9b91ce95a29fbdc40626e ] This patch fixes a problem where the AR8035 PHY can't be detected on an Cisco Meraki MR24, if the ethernet cable is not connected on boot. Russell Senior provided steps to reproduce the issue: |Disconnect ethernet cable, apply power, wait until device has booted, |plug in ethernet, check for interfaces, no eth0 is listed. | |This appears to be a problem during probing of the AR8035 Phy chip. |When ethernet has no link, the phy detection fails, and eth0 is not |created. Plugging ethernet later has no effect, because there is no |interface as far as the kernel is concerned. The relevant part of |the boot log looks like this: |this is the failing case: | |[ 0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.882532] /plb/opb/ethernet@ef600c00: reset timeout |[ 0.888546] /plb/opb/ethernet@ef600c00: can't find PHY! |and the succeeding case: | |[ 0.876672] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.883952] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:01:.. |[ 0.890822] eth0: found Atheros 8035 Gigabit Ethernet PHY (0x01) Based on the comment and the commit message of commit 23fbb5a87c56 ("emac: Fix EMAC soft reset on 460EX/GT"). This is because the AR8035 PHY doesn't provide the TX Clock, if the ethernet cable is not attached. This causes the reset to timeout and the PHY detection code in emac_init_phy() is unable to detect the AR8035 PHY. As a result, the emac driver bails out early and the user left with no ethernet. In order to stay compatible with existing configurations, the driver tries the current reset approach at first. Only if the first attempt timed out, it does perform one more retry with the clock temporarily switched to the internal source for just the duration of the reset. LEDE-Bug: #687 <https://bugs.lede-project.org/index.php?do=details&task_id=687> Cc: Chris Blake <chrisrblake93@gmail.com> Reported-by: Russell Senior <russell@personaltelco.net> Fixes: 23fbb5a87c56e98 ("emac: Fix EMAC soft reset on 460EX/GT") Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13Fix loop device flush before configure v3James Wang
[ Upstream commit 6460495709aeb651896bc8e5c134b2e4ca7d34a8 ] While installing SLES-12 (based on v4.4), I found that the installer will stall for 60+ seconds during LVM disk scan. The root cause was determined to be the removal of a bound device check in loop_flush() by commit b5dd2f6047ca ("block: loop: improve performance via blk-mq"). Restoring this check, examining ->lo_state as set by loop_set_fd() eliminates the bad behavior. Test method: modprobe loop max_loop=64 dd if=/dev/zero of=disk bs=512 count=200K for((i=0;i<4;i++))do losetup -f disk; done mkfs.ext4 -F /dev/loop0 for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done for f in `ls /dev/loop[0-9]*|sort`; do \ echo $f; dd if=$f of=/dev/null bs=512 count=1; \ done Test output: stock patched /dev/loop0 18.1217e-05 8.3842e-05 /dev/loop1 6.1114e-05 0.000147979 /dev/loop10 0.414701 0.000116564 /dev/loop11 0.7474 6.7942e-05 /dev/loop12 0.747986 8.9082e-05 /dev/loop13 0.746532 7.4799e-05 /dev/loop14 0.480041 9.3926e-05 /dev/loop15 1.26453 7.2522e-05 Note that from loop10 onward, the device is not mounted, yet the stock kernel consumes several orders of magnitude more wall time than it does for a mounted device. (Thanks for Mike Galbraith <efault@gmx.de>, give a changelog review.) Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: James Wang <jnwang@suse.com> Fixes: b5dd2f6047ca ("block: loop: improve performance via blk-mq") Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13MIPS: kprobes: flush_insn_slot should flush only if probe initialisedMarcin Nowakowski
[ Upstream commit 698b851073ddf5a894910d63ca04605e0473414e ] When ftrace is used with kprobes, it is possible for a kprobe to contain an invalid location (ie. only initialised to 0 and not to a specific location in the code). Trying to perform a cache flush on such location leads to a crash r4k_flush_icache_range(). Fixes: c1bf207d6ee1 ("MIPS: kprobe: Add support.") Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16296/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13MIPS: mm: adjust PKMAP locationMarcin Nowakowski
[ Upstream commit c56e7a4c3e77f6fbd9b55c06c14eda65aae58958 ] Space reserved for PKMap should span from PKMAP_BASE to FIXADDR_START. For large page sizes this is not the case as eg. for 64k pages the range currently defined is from 0xfe000000 to 0x102000000(!!) which obviously isn't right. Remove the hardcoded location and set the BASE address as an offset from FIXADDR_START. Since all PKMAP ptes have to be placed in a contiguous memory, ensure that this is the case by placing them all in a single page. This is achieved by aligning the end address to pkmap pages count pages. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15950/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13MIPS: mm: fixed mappings: correct initialisationMarcin Nowakowski
[ Upstream commit 71eb989ab5a110df8bcbb9609bacde73feacbedd ] fixrange_init operates at PMD-granularity and expects the addresses to be PMD-size aligned, but currently that might not be the case for PKMAP_BASE unless it is defined properly, so ensure a correct alignment is used before passing the address to fixrange_init. fixed mappings: only align the start address that is passed to fixrange_init rather than the value before adding the size, as we may end up with uninitialised upper part of the range. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15948/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13perf/core: Correct event creation with PERF_FORMAT_GROUPPeter Zijlstra
[ Upstream commit ba5213ae6b88fb170c4771fef6553f759c7d8cdd ] Andi was asking about PERF_FORMAT_GROUP vs inherited events, which led to the discovery of a bug from commit: 3dab77fb1bf8 ("perf: Rework/fix the whole read vs group stuff") - PERF_SAMPLE_GROUP = 1U << 4, + PERF_SAMPLE_READ = 1U << 4, - if (attr->inherit && (attr->sample_type & PERF_SAMPLE_GROUP)) + if (attr->inherit && (attr->read_format & PERF_FORMAT_GROUP)) is a clear fail :/ While this changes user visible behaviour; it was previously possible to create an inherited event with PERF_SAMPLE_READ; this is deemed acceptible because its results were always incorrect. Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vince@deater.net> Fixes: 3dab77fb1bf8 ("perf: Rework/fix the whole read vs group stuff") Link: http://lkml.kernel.org/r/20170530094512.dy2nljns2uq7qa3j@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13e1000e: Undo e1000e_pm_freeze if __e1000_shutdown failsChris Wilson
[ Upstream commit 833521ebc65b1c3092e5c0d8a97092f98eec595d ] An error during suspend (e100e_pm_suspend), [ 429.994338] ACPI : EC: event blocked [ 429.994633] e1000e: EEE TX LPI TIMER: 00000011 [ 430.955451] pci_pm_suspend(): e1000e_pm_suspend+0x0/0x30 [e1000e] returns -2 [ 430.955454] dpm_run_callback(): pci_pm_suspend+0x0/0x140 returns -2 [ 430.955458] PM: Device 0000:00:19.0 failed to suspend async: error -2 [ 430.955581] PM: Some devices failed to suspend, or early wake event detected [ 430.957709] ACPI : EC: event unblocked lead to complete failure: [ 432.585002] ------------[ cut here ]------------ [ 432.585013] WARNING: CPU: 3 PID: 8372 at kernel/irq/manage.c:1478 __free_irq+0x9f/0x280 [ 432.585015] Trying to free already-free IRQ 20 [ 432.585016] Modules linked in: cdc_ncm usbnet x86_pkg_temp_thermal intel_powerclamp coretemp mii crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep lpc_ich snd_hda_core snd_pcm mei_me mei sdhci_pci sdhci i915 mmc_core e1000e ptp pps_core prime_numbers [ 432.585042] CPU: 3 PID: 8372 Comm: kworker/u16:40 Tainted: G U 4.10.0-rc8-CI-Patchwork_3870+ #1 [ 432.585044] Hardware name: LENOVO 2356GCG/2356GCG, BIOS G7ET31WW (1.13 ) 07/02/2012 [ 432.585050] Workqueue: events_unbound async_run_entry_fn [ 432.585051] Call Trace: [ 432.585058] dump_stack+0x67/0x92 [ 432.585062] __warn+0xc6/0xe0 [ 432.585065] warn_slowpath_fmt+0x4a/0x50 [ 432.585070] ? _raw_spin_lock_irqsave+0x49/0x60 [ 432.585072] __free_irq+0x9f/0x280 [ 432.585075] free_irq+0x34/0x80 [ 432.585089] e1000_free_irq+0x65/0x70 [e1000e] [ 432.585098] e1000e_pm_freeze+0x7a/0xb0 [e1000e] [ 432.585106] e1000e_pm_suspend+0x21/0x30 [e1000e] [ 432.585113] pci_pm_suspend+0x71/0x140 [ 432.585118] dpm_run_callback+0x6f/0x330 [ 432.585122] ? pci_pm_freeze+0xe0/0xe0 [ 432.585125] __device_suspend+0xea/0x330 [ 432.585128] async_suspend+0x1a/0x90 [ 432.585132] async_run_entry_fn+0x34/0x160 [ 432.585137] process_one_work+0x1f4/0x6d0 [ 432.585140] ? process_one_work+0x16e/0x6d0 [ 432.585143] worker_thread+0x49/0x4a0 [ 432.585145] kthread+0x107/0x140 [ 432.585148] ? process_one_work+0x6d0/0x6d0 [ 432.585150] ? kthread_create_on_node+0x40/0x40 [ 432.585154] ret_from_fork+0x2e/0x40 [ 432.585156] ---[ end trace 6712df7f8c4b9124 ]--- The unwind failures stems from commit 2800209994f8 ("e1000e: Refactor PM flows"), but it may be a later patch that introduced the non-recoverable behaviour. Fixes: 2800209994f8 ("e1000e: Refactor PM flows") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99847 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ullLeonard Crestez
[ Upstream commit b3ea575770c7eeb259c77b6861cd14d00eb309df ] Support for imx6ull is already present but it's based on of_machine_is_compatible("fsl,imx6ull") checks. Add it to the MXC_CPU_* enumeration as well. This also fixes /sys/devices/soc0/soc_id reading "Unknown". Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net: phy: avoid genphy_aneg_done() for PHYs without clause 22 supportRussell King
[ Upstream commit 41408ad519f7a2a1c5229e61f2a97f4df1b61adc ] Avoid calling genphy_aneg_done() for PHYs that do not implement the Clause 22 register set. Clause 45 PHYs may implement the Clause 22 register set along with the Clause 22 extension MMD. Hence, we can't simply block access to the Clause 22 functions based on the PHY being a Clause 45 PHY. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13mceusb: sporadic RX truncation corruption fixA Sun
[ Upstream commit 8e175b22e8640bf3a58e071af54190b909e4a944 ] Intermittent RX truncation and loss of IR received data. This resulted in receive stream synchronization errors where driver attempted to incorrectly parse IR data (eg 0x90 below) as command response. [ 3969.139898] mceusb 1-1.2:1.0: processed IR data [ 3969.151315] mceusb 1-1.2:1.0: rx data: 00 90 (length=2) [ 3969.151321] mceusb 1-1.2:1.0: Unknown command 0x00 0x90 [ 3969.151336] mceusb 1-1.2:1.0: rx data: 98 0a 8d 0a 8e 0a 8e 0a 8e 0a 8e 0a 9a 0a 8e 0a 0b 3a 8e 00 80 41 59 00 00 (length=25) [ 3969.151341] mceusb 1-1.2:1.0: Raw IR data, 24 pulse/space samples [ 3969.151348] mceusb 1-1.2:1.0: Storing space with duration 500000 Bug trigger appears to be normal, but heavy, IR receiver use. Signed-off-by: A Sun <as1033x@comcast.net> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13cx25840: fix unchecked return valuesPan Bian
[ Upstream commit 35378ce143071c2a6bad4b59a000e9b9f8f6ea67 ] In functions cx25840_initialize(), cx231xx_initialize(), and cx23885_initialize(), the return value of create_singlethread_workqueue() is used without validation. This may result in NULL dereference and cause kernel crash. This patch fixes it. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13e1000e: fix race condition around skb_tstamp_tx()Jacob Keller
[ Upstream commit 5012863b7347866764c4a4e58b62fb05346b0d06 ] The e1000e driver and related hardware has a limitation on Tx PTP packets which requires we limit to timestamping a single packet at once. We do this by verifying that we never request a new Tx timestamp while we still have a tx_hwtstamp_skb pointer. Unfortunately the driver suffers from a race condition around this. The tx_hwtstamp_skb pointer is not set to NULL until after skb_tstamp_tx() is called. This function notifies the stack and applications of a new timestamp. Even a well behaved application that only sends a new request when the first one is finished might be woken up and possibly send a packet before we can free the timestamp in the driver again. The result is that we needlessly ignore some Tx timestamp requests in this corner case. Fix this by assigning the tx_hwtstamp_skb pointer prior to calling skb_tstamp_tx() and use a temporary pointer to hold the timestamped skb until that function finishes. This ensures that the application is not woken up until the driver is ready to begin timestamping a new packet. This ensures that well behaved applications do not accidentally race with condition to skip Tx timestamps. Obviously an application which sends multiple Tx timestamp requests at once will still only timestamp one packet at a time. Unfortunately there is nothing we can do about this. Reported-by: David Mirabito <davidm@metamako.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13tags: honor COMPILED_SOURCE with apart output directoryRobert Jarzmik
[ Upstream commit cbf52a3e6a8a92beec6e0c70abf4111cd8f8faf7 ] When the kernel is compiled with an "O=" argument, the object files are not in the source tree, but in the build tree. This patch fixes O= build by looking for object files in the build tree. Fixes: 923e02ecf3f8 ("scripts/tags.sh: Support compiled source") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13perf report: Ensure the perf DSO mapping matches what libdw seesMilian Wolff
[ Upstream commit 2538b9e2450ae255337c04356e9e0f8cb9ec48d9 ] In some situations the libdw unwinder stopped working properly. I.e. with libunwind we see: ~~~~~ heaptrack_gui 2228 135073.400112: 641314 cycles: e8ed _dl_fixup (/usr/lib/ld-2.25.so) 15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so) ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) 608f3 _GLOBAL__sub_I_kdynamicjobtracker.cpp (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) f199 call_init.part.0 (/usr/lib/ld-2.25.so) f2a5 _dl_init (/usr/lib/ld-2.25.so) db9 _dl_start_user (/usr/lib/ld-2.25.so) ~~~~~ But with libdw and without this patch this sample is not properly unwound: ~~~~~ heaptrack_gui 2228 135073.400112: 641314 cycles: e8ed _dl_fixup (/usr/lib/ld-2.25.so) 15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so) ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) ~~~~~ Debug output showed me that libdw found a module for the last frame address, but it thinks it belongs to /usr/lib/ld-2.25.so. This patch double-checks what libdw sees and what perf knows. If the mappings mismatch, we now report the elf known to perf. This fixes the situation above, and the libdw unwinder produces the same stack as libunwind. Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20170602143753.16907-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13perf header: Set proper module name when build-id event foundNamhyung Kim
[ Upstream commit 1deec1bd96ccd8beb04d2112a6d12fe20505c3a6 ] When perf processes build-id event, it creates DSOs with the build-id. But it didn't set the module short name (like '[module-name]') so when processing a kernel mmap event of the module, it cannot found the DSO as it only checks the short names. That leads for perf to create a same DSO without the build-id info and it'll lookup the system path even if the DSO is already in the build-id cache. After kernel was updated, perf cannot find the DSO and cannot show symbols in it anymore. You can see this if you have an old data file (w/ old kernel version): $ perf report -i perf.data.old -v |& grep scsi_mod build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz : cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 Failed to open /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz, continuing without symbols ... The second message didn't show the build-id. With this patch: $ perf report -i perf.data.old -v |& grep scsi_mod build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz: cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz with build id cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 not found, continuing without symbols ... Now it shows the build-id but still cannot load the symbol table. This is a different problem which will be fixed in the next patch. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170531120105.21731-1-namhyung@kernel.org [ Fix the build on older compilers (debian <= 8, fedora <= 21, etc) wrt kmod_path var init ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net/mlx4: Check if Granular QoS per VF has been enabled before updating QP ↵Ido Shamay
qos_vport [ Upstream commit 269f9883fe254d109afdfc657875c456d6fabb08 ] The Granular QoS per VF feature must be enabled in FW before it can be used. Thus, the driver cannot modify a QP's qos_vport value (via the UPDATE_QP FW command) if the feature has not been enabled -- the FW returns an error if this is attempted. Fixes: 08068cd5683f ("net/mlx4: Added qos_vport QP configuration in VST mode") Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net/mlx4: Fix the check in attaching steering rulesTalat Batheesh
[ Upstream commit 6dc06c08bef1c746ff8da33dab677cfbacdcad32 ] Our previous patch (cited below) introduced a regression for RAW Eth QPs. Fix it by checking if the QP number provided by user-space exists, hence allowing steering rules to be added for valid QPs only. Fixes: 89c557687a32 ("net/mlx4_en: Avoid adding steering rules with invalid ring") Reported-by: Or Gerlitz <gerlitz.or@gmail.com> Signed-off-by: Talat Batheesh <talatb@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13sit: reload iphdr in ipip6_rcvHaishuang Yan
[ Upstream commit b699d0035836f6712917a41e7ae58d84359b8ff9 ] Since iptunnel_pull_header() can call pskb_may_pull(), we must reload any pointer that was related to skb->head. Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap") Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflowJason A. Donenfeld
[ Upstream commit 48a1df65334b74bd7531f932cca5928932abf769 ] This is a defense-in-depth measure in response to bugs like 4d6fa57b4dab ("macsec: avoid heap overflow in skb_to_sgvec"). There's not only a potential overflow of sglist items, but also a stack overflow potential, so we fix this by limiting the amount of recursion this function is allowed to do. Not actually providing a bounded base case is a future disaster that we can easily avoid here. As a small matter of house keeping, we take this opportunity to move the documentation comment over the actual function the documentation is for. While this could be implemented by using an explicit stack of skbuffs, when implementing this, the function complexity increased considerably, and I don't think such complexity and bloat is actually worth it. So, instead I built this and tested it on x86, x86_64, ARM, ARM64, and MIPS, and measured the stack usage there. I also reverted the recent MIPS changes that give it a separate IRQ stack, so that I could experience some worst-case situations. I found that limiting it to 24 layers deep yielded a good stack usage with room for safety, as well as being much deeper than any driver actually ever creates. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13bio-integrity: Do not allocate integrity context for bio w/o dataDmitry Monakhov
[ Upstream commit 3116a23bb30272d74ea81baf5d0ee23f602dd15b ] If bio has no data, such as ones from blkdev_issue_flush(), then we have nothing to protect. This patch prevent bugon like follows: kfree_debugcheck: out of range ptr ac1fa1d106742a5ah kernel BUG at mm/slab.c:2773! invalid opcode: 0000 [#1] SMP Modules linked in: bcache CPU: 0 PID: 4428 Comm: xfs_io Tainted: G W 4.11.0-rc4-ext4-00041-g2ef0043-dirty #43 Hardware name: Virtuozzo KVM, BIOS seabios-1.7.5-11.vz7.4 04/01/2014 task: ffff880137786440 task.stack: ffffc90000ba8000 RIP: 0010:kfree_debugcheck+0x25/0x2a RSP: 0018:ffffc90000babde0 EFLAGS: 00010082 RAX: 0000000000000034 RBX: ac1fa1d106742a5a RCX: 0000000000000007 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88013f3ccb40 RBP: ffffc90000babde8 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000fcb76420 R11: 00000000725172ed R12: 0000000000000282 R13: ffffffff8150e766 R14: ffff88013a145e00 R15: 0000000000000001 FS: 00007fb09384bf40(0000) GS:ffff88013f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd0172f9e40 CR3: 0000000137fa9000 CR4: 00000000000006f0 Call Trace: kfree+0xc8/0x1b3 bio_integrity_free+0xc3/0x16b bio_free+0x25/0x66 bio_put+0x14/0x26 blkdev_issue_flush+0x7a/0x85 blkdev_fsync+0x35/0x42 vfs_fsync_range+0x8e/0x9f vfs_fsync+0x1c/0x1e do_fsync+0x31/0x4a SyS_fsync+0x10/0x14 entry_SYSCALL_64_fastpath+0x1f/0xc2 Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13Fix serial console on SNI RM400 machinesThomas Bogendoerfer
[ Upstream commit e279e6d98e0cf2c2fe008b3c29042b92f0e17b1d ] sccnxp driver doesn't get the correct uart clock rate, if CONFIG_HAVE_CLOCK is disabled. Correct usage of clk API to make it work with/without it. Fixes: 90efa75f7ab0 (serial: sccnxp: Using CLK API for getting UART clock) Suggested-by: Russell King - ARM Linux <linux@armlinux.org.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13cxgb4: fix incorrect cim_la output for T6Ganesh Goudar
[ Upstream commit a97051f4553551d13e586ab3cb6ae13093a44a81 ] take care of UpDbgLaRdPtr[0-3] restriction for T6. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13drm/omap: fix tiled buffer stride calculationsTomi Valkeinen
[ Upstream commit cc8dd7661ccc2d8dc88921da8e6cc7c2fcdb0341 ] omap_gem uses page alignment for buffer stride. The related calculations are a bit off, though, as byte stride of 4096 gets aligned to 8192, instead of 4096. This patch changes the code to use DIV_ROUND_UP(), which fixes those calculations and makes them more readable. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13mISDN: Fix a sleep-in-atomic bugJia-Ju Bai
[ Upstream commit 93818da5eed63fbc17b64080406ea53b86b23309 ] The driver may sleep under a read spin lock, and the function call path is: send_socklist (acquire the lock by read_lock) skb_copy(GFP_KERNEL) --> may sleep To fix it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and ↵Jia-Ju Bai
qlcnic_82xx_hw_read_wx_2M [ Upstream commit 5ea6d691aac6c93b790f0905e3460d44cc4c449b ] The driver may sleep under a write spin lock, and the function call path is: qlcnic_82xx_hw_write_wx_2M (acquire the lock by write_lock_irqsave) crb_win_lock qlcnic_pcie_sem_lock usleep_range qlcnic_82xx_hw_read_wx_2M (acquire the lock by write_lock_irqsave) crb_win_lock qlcnic_pcie_sem_lock usleep_range To fix it, the usleep_range is replaced with udelay. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13perf trace: Add mmap alias for s390Jiri Olsa
[ Upstream commit 54265664c15a68905d8d67d19205e9a767636434 ] The s390 architecture maps sys_mmap (nr 90) into sys_old_mmap. For this reason perf trace can't find the proper syscall event to get args format from and displays it wrongly as 'continued'. To fix that fill the "alias" field with "old_mmap" for trace's mmap record to get the correct translation. Before: 0.042 ( 0.011 ms): vest/43052 fstat(statbuf: 0x3ffff89fd90 ) = 0 0.042 ( 0.028 ms): vest/43052 ... [continued]: mmap()) = 0x3fffd6e2000 0.072 ( 0.025 ms): vest/43052 read(buf: 0x3fffd6e2000, count: 4096 ) = 6 After: 0.045 ( 0.011 ms): fstat(statbuf: 0x3ffff8a0930 ) = 0 0.057 ( 0.018 ms): mmap(arg: 0x3ffff8a0858 ) = 0x3fffd14a000 0.076 ( 0.025 ms): read(buf: 0x3fffd14a000, count: 4096 ) = 6 Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20170531113557.19175-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-15 00:29:21 +0000