summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-15bnx2x: allocate smaller Rx rings for 1G functionsMintz Yuval
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: allocate memory dynamically in ethtool self-test.Mintz Yuval
From: Merav Sicron <meravs@broadcom.com> Current ethtool self tests usesa large buffer on stack. This patch replaces that array by dynamically allocated memory Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: force 10G on 84833 phy should be autoneg with only 10G advertisedMintz Yuval
From: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: added autoneg-restart after link advertisement changesMintz Yuval
From: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: ethtool publishes link partners speed and FCMintz Yuval
Following the changes in the ethtool source code, this patch enables the bnx2x driver to publish the Link partner's capabilities s, when ethtool is used on an interface which completed autoneg. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: half duplex support added for several boardsMintz Yuval
From: Yaniv Rosner <yaniv.rosner@broadcom.com> Several boards require an additional HW bit written in-order to enable half duplex. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: consistent statistics after internal driver reloadMintz Yuval
Currently bnx2x statistics are reset by inner driver reload, e.g. by MTU change. This patch fixes this issue - from now on statistics should only be reset upon device closure. Thanks to Michal Schmidt <mschmidt@redhat.com> for his initial patch regarding this issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14mlx4: add unicast steering entries to resource_trackerEugenia Emantayev
Add unicast steering entries to resource tracker. Do qp_detach also for these entries when VF doesn't shut down gracefully. Otherwise there is leakage of these resources, since they are not tracked. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14mlx4: attach multicast with correct flagEugenia Emantayev
mlx4_multicast_attach/detach() should use always MLX4_MC_STEER flag Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14mlx4: remove redundant adding of steering type to gidEugenia Emantayev
mlx4_uc_steer_add/release() should not add MLX4_UC_STEER flag to gid. It is added in mlx4_unicast_attach/detach(). Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14mlx4: remove unnecessary variables and argumentsEugenia Emantayev
mlx4_qp_attach/detach_common() don't use hash variable, move it to find_entry() static find_entry() in mcg.c doesn't use steer argument Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14mlx4: remove unused field high_priosEugenia Emantayev
Remove unnecessary field high_prios from mlx4_steer struct and initialization Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14mlx4: fix QP tree trashingEugenia Emantayev
When adding new unicast steer entry, before moving qp to state ready, actually before calling mlx4_RST2INIT_QP_wrapper(), there were added a lot of entries with local_qpn=0 into radix tree. This fact impacted the get_res() function and proper functioning of resource tracker in addition to adding trash entries into radix tree. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@melllanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14mlx4_core: fix buffer overrunEugenia Emantayev
When passing MLX4_UC_STEER=1 it was translated to value 2 after mlx4_QP_ATTACH_wrapper. Therefore in new_steering_entry() unicast steer entries were added to index 2 of array of size 2. Fixing this bug by shift right to one position. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Update copyrightMatt Carlson
This patch updates the copyright dates in the tg3 driver. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Use *_UNKNOWN ethtool definitionsMatt Carlson
This patch replaces tg3's private SPEED_INVALID and DUPLEX_INVALID definitions with SPEED_UNKNOWN and DUPLEX_UNKNOWN respectively. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Remove unneeded link_config.orig_... membersMatt Carlson
This patch removes the unneeded link_config.orig_* members. When the phy is in a low power state, the TG3_PHYFLG_IS_LOW_POWER flag solely determines how the link is configured. When the phy is powered back up, it can resume using the original settings. For the phylib case, the link configuration still needs to be saved, but since the phylib maintains its own configuration, we can repurpose the (unused in this case) tg3 link configuration members. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Remove unused link config codeMatt Carlson
When tg3 devices are shutdown, the driver uses the TG3_PHYFLG_IS_LOW_POWER flag to enable a static phy configuration. Any attempt to use the link configuration variables is dead code. This patch removes such code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Consolidate ASIC rev detection codeMatt Carlson
Detecting the ASIC revision of a device is getting to be an increasingly complex process. This patch consolidates all the ASIC rev detection code to a single routine for better maintainability. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Reduce UMP event collision windowMatt Carlson
The tg3 driver needs to submit a few phy register values to the UMP firmware each time the link state changes. Up until now, the driver would wait for the previous event to complete, then proceed to gather data through a series of phy accesses. Since phy accesses are relatively slow, it is possible for another thread to attempt to submit its own event while the UMP code is still construction its message. This patch seeks to minimize the collision window as much as possible by preloading the phy data. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Fix NVRAM page writes on newer devicesMatt Carlson
On newer devices, the hardware expects the NVRAM address register to be written only once per NVRAM page. To do otherwise causes NVRAM corruption. This patch fixes the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Fix copper autoneg adv checksMatt Carlson
When checking the autoneg advertisements, the driver failed to include the master and master enable bits for the bcm5701. This patch fixes the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Fix stats while interface is downMatt Carlson
If the tg3 interface is down, the driver will return ethtool stats uninitialized. This patch zeroes out the destination stat buffer in such a case. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Disable new DMA engine for 57766Matt Carlson
A bug was found in the new DMA engine for the 57766. This patch disables it, which causes the device to fallback to the old DMA engine. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
2012-02-13e1000e: cleanup goto statements to exit points without common workBruce Allan
Per ./Documentation/CodingStyle, goto statements are acceptable for the centralized exiting of functions when there are multiple exit points which share common work such as cleanup. When no common work is required for multiple exit points, the function should just return at these exit points instead of doing an unnecessary jump to a centralized return. This patch cleans up the inappropriate use of goto statements, and removes unnecessary variables (or move to a smaller scope) where possible as a result of the cleanups. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13e1000e: potentially incorrect return for e1000e_setup_fiber_serdes_linkBruce Allan
In the unlikely event that e1000_poll_fiber_serdes_link_generic() is called and it returns an error, the returned error code value is not propagated to the caller of e1000e_setup_fiber_serdes_link(). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13e1000e: potentially incorrect return for e1000_init_hw_ich8lanBruce Allan
In the unlikely event that e1000_setup_link_ich8lan() returns an error, the returned error code value is not propagated to the caller of e1000_init_hw_ich8lan(). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13e1000e: cleanup: minor whitespace addition (insert blank line separator)Bruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13e1000e: cleanup: remove unnecessary variable initializationsBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13e1000e: cleanup: remove unnecessary test and returnBruce Allan
Fall-through to a return statement that effectively does the same. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13e1000e: cleanup: remove unnecessary variable ret_valBruce Allan
ret_val gets initialized to -E1000_ERR_NVM and never set differently, so get rid of it and just return -E1000_ERR_NVM. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13e1000e: cleanup: remove unreachable statementBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13e1000e: potentially incorrect return for e1000_set_d3_lplu_state_ich8lanBruce Allan
In the unlikely event that e1e_wphy() returns an error, the returned error code is not propogated to the caller of e1000_set_d3_lplu_state_ich8lan(). With this change, there is a rare possibility that ret_val might not get set so it must be initialized. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13net_sched: sch_plug: plug_qdisc_ops is staticEric Dumazet
net/sched/sch_plug.c:211:18: warning: symbol 'plug_qdisc_ops' was not declared. Should it be static? Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13ppp: fix truesize underestimationEric Dumazet
When building frag_list, head truesize should be sum of all frag truesize. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13gro: fix truesize underestimationEric Dumazet
skb_gro_receive() doesnt update truesize properly when adding one skb to frag_list. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Move transmit comment to a better locationMatt Carlson
This patch moves a comment in the transmit path to a better location. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Eliminate unneeded prototypeMatt Carlson
This patch eliminates the unneeded tg3_halt_cpu() prototype and moves the tg3_setup_phy() prototype closer to where it is needed. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Relocate tg3_find_peerMatt Carlson
This patch relocates tg3_find_peer to eliminate a prototype. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Move tg3_nvram_write_block functionsMatt Carlson
This patch moves the tg3_nvram_write_block functions higher in the file to eliminate a prototype. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Move tg3_set_rx_modeMatt Carlson
This patch moves __tg3_set_rx_mode above its first use and moves tg3_set_rx_mode down closer to where the netdev_ops functions should be. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Move tg3_change_mtu to a better locationMatt Carlson
This patch moves tg3_change_mtu to a better location. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Relocate tg3_reset_taskMatt Carlson
This patch moves tg3_reset_task further down in the file where it makes more sense to be. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13tg3: Move tg3_restart_hw to a better locationMatt Carlson
This patch relocates tg3_restart_hw() to a better location. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13virtio: net: remove sparse errorsEric Dumazet
commit 3fa2a1df909 (virtio-net: per cpu 64 bit stats (v2)) added extra __percpu qualifiers and sparse errors. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13e1000e: cleanup: always return 0Bruce Allan
These are a few instances of returning a value that can only be 0 so just use a 'return 0' to make it more obvious. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13e1000e: cleanup: remove unnecessary assignments just before returningBruce Allan
Just return the appropriate value. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13e1000e: potential incorrect return for e1000_setup_copper_link_80003es2lanBruce Allan
In the unlikely event that e1000e_setup_copper_link() returns an error, the returned error code value is not propogated to the caller of e1000_setup_copper_link_80003es2lan(). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13e1000e: potentially incorrect return for e1000_cfg_kmrn_10_100_80003es2lanBruce Allan
In the unlikely event that e1e_wphy() returns an error, the returned error code value is not propogated to the caller of e1000_cfg_kmrn_10_100_80003es2lan(). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 17:22:31 +0000