Age | Commit message (Collapse) | Author |
|
It is possible in rbd_get_num_segments() for an overflow to occur
when adding the offset and length. This is easily avoided.
Since the function returns an int and the one caller is already
prepared to handle errors, have it return -ERANGE if overflow would
occur.
The overflow check would not work if a zero-length request was
being tested, so short-circuit that case, returning 0 for the
number of segments required. (This condition might be avoided
elsewhere already, I don't know.)
Have the caller end the request if either an error or 0 is returned.
The returned value is passed to __blk_end_request_all(), meaning
a 0 length request is not treated an error.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
|
|
There's a test for null rq pointer inside the while loop in
rbd_rq_fn() that's not needed. That same test already occurred
in the immediatly preceding loop condition test.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
|
|
In bio_chain_clone(), at the end of the function the bi_next field
of the tail of the new bio chain is nulled. This isn't necessary,
because if "tail" is non-null, its value will be the last bio
structure allocated at the top of the while loop in that function.
And before that structure is added to the end of the new chain, its
bi_next pointer is always made null.
While touching that function, clean a few other things:
- define each local variable on its own line
- move the definition of "tmp" to an inner scope
- move the modification of gfpmask closer to where it's used
- rearrange the logic that sets the chain's tail pointer
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
|
|
The "notify_timeout" rbd device option is never used, so get rid of
it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
|
|
Add the ability to map an rbd image read-only, by specifying either
"read_only" or "ro" as an option on the rbd "command line." Also
allow the inverse to be explicitly specified using "read_write" or
"rw".
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
|
|
The rbd options don't really apply to the ceph client. So don't
store a pointer to it in the ceph_client structure, and put them
(a struct, not a pointer) into the rbd_dev structure proper.
Pass the rbd device structure to rbd_client_create() so it can
assign rbd_dev->rbdc if successful, and have it return an error code
instead of the rbd client pointer.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
|
|
This just rearranges things a bit more in rbd_header_from_disk()
so that the snapshot sizes are initialized right after the buffer
to hold them is allocated and doing a little further consolidation
that follows from that. Also adds a few simple comments.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
|
|
The only thing the on-disk snap_names_len field is needed is to
size the buffer allocated to hold a copy of the snapshot names
for an rbd image.
So don't bother saving it in the in-core rbd_image_header structure.
Just use a local variable to hold the required buffer size while
it's needed.
Move the code that actually copies the snapshot names up closer
to where the required length is saved.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
|
|
In rbd_header_from_disk() the object prefix buffer is sized based on
the maximum size it's block_name equivalent on disk could be.
Instead, only allocate enough to hold null-terminated string from
the on-disk header--or the maximum size of no NUL is found.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
|
|
There is only caller of __rbd_client_find(), and it somewhat
clumsily gets the appropriate lock and gets a reference to the
existing ceph_client structure if it's found.
Instead, have that function handle its own locking, and acquire the
reference if found while it holds the lock. Drop the underscores
from the name because there's no need to signify anything special
about this function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
|
|
Using list_move_tail() instead of list_del() + list_add_tail().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Sage Weil <sage@inktank.com>
|
|
This fixes a bug that went in with this commit:
commit f6e0c99092cca7be00fca4080cfc7081739ca544
Author: Alex Elder <elder@inktank.com>
Date: Thu Aug 2 11:29:46 2012 -0500
rbd: simplify __rbd_init_snaps_header()
The problem is that a new rbd snapshot needs to go either after an
existing snapshot entry, or at the *end* of an rbd device's snapshot
list. As originally coded, it is placed at the beginning. This was
based on the assumption the list would be empty (so it wouldn't
matter), but in fact if multiple new snapshots are added to an empty
list in one shot the list will be non-empty after the first one is
added.
This addresses http://tracker.newdream.net/issues/3063
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
In the on-disk image header structure there is a field "block_name"
which represents what we now call the "object prefix" for an rbd
image. Rename this field "object_prefix" to be consistent with
modern usage.
This appears to be the only remaining vestige of the use of "block"
in symbols that represent objects in the rbd code.
This addresses http://tracker.newdream.net/issues/1761
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
|
|
Make ceph_monc_do_poolop() static to remove the following sparse warning:
* net/ceph/mon_client.c:616:5: warning: symbol 'ceph_monc_do_poolop' was not
declared. Should it be static?
Also drops the 'ceph_monc_' prefix, now being a private function.
Signed-off-by: Iulius Curt <icurt@ixiacom.com>
Signed-off-by: Sage Weil <sage@inktank.com>
|
|
This is unused; use monc->client->have_fsid.
Signed-off-by: Sage Weil <sage@inktank.com>
|
|
A recent change to /sbin/mountall causes any trailing '/' character
in the "device" (or fs_spec) field in /etc/fstab to be stripped. As
a result, an entry for a ceph mount that intends to mount the root
of the name space ends up with now path portion, and the ceph mount
option processing code rejects this.
That is, an entry in /etc/fstab like:
cephserver:port:/ /mnt ceph defaults 0 0
provides to the ceph code just "cephserver:port:" as the "device,"
and that gets rejected.
Although this is a bug in /sbin/mountall, we can have the ceph mount
code support an empty/nonexistent path, interpreting it to mean the
root of the name space.
RFC 5952 offers recommendations for how to express IPv6 addresses,
and recommends the usage found in RFC 3986 (which specifies the
format for URI's) for representing both IPv4 and IPv6 addresses that
include port numbers. (See in particular the definition of
"authority" found in the Appendix of RFC 3986.)
According to those standards, no host specification will ever
contain a '/' character. As a result, it is sufficient to scan a
provided "device" from an /etc/fstab entry for the first '/'
character, and if it's found, treat that as the beginning of the
path. If no '/' character is present, we can treat the entire
string as the monitor host specification(s), and assume the path
to be the root of the name space. We'll still require a ':' to
separate the host portion from the (possibly empty) path portion.
This means that we can more formally define how ceph will interpret
the "device" it's provided when processing a mount request:
"device" will look like:
<server_spec>[,<server_spec>...]:[<path>]
where
<server_spec> is <ip>[:<port>]
<path> is optional, but if present must begin with '/'
This addresses http://tracker.newdream.net/issues/2919
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
|
|
Right now rbd_read_header() both reads the header object for an rbd
image and decodes its contents. It does this repeatedly if needed,
in order to ensure a complete and intact header is obtained.
Separate this process into two steps--reading of the raw header
data (in new function, rbd_dev_v1_header_read()) and separately
decoding its contents (in rbd_header_from_disk()). As a result,
the latter function no longer requires its allocated_snaps argument.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Add checks on the validity of the snap_count and snap_names_len
field values in rbd_dev_ondisk_valid(). This eliminates the
need to do them in rbd_header_from_disk().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
The only caller of rbd_header_from_disk() is rbd_read_header().
It passes as allocated_snaps the number of snapshots it will
have received from the server for the snapshot context that
rbd_header_from_disk() is to interpret. The first time through
it provides 0--mainly to extract the number of snapshots from
the snapshot context header--so that it can allocate an
appropriately-sized buffer to receive the entire snapshot
context from the server in a second request.
rbd_header_from_disk() will not fill in the array of snapshot ids
unless the number in the snapshot matches the number the caller
had allocated.
This patch adjusts that logic a little further to be more efficient.
rbd_read_header() doesn't even examine the snapshot context unless
the snapshot count (stored in header->total_snaps) matches the
number of snapshots allocated. So rbd_header_from_disk() doesn't
need to allocate or fill in the snapshot context field at all in
that case.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
This just moves code around for the most part. It was pulled out as
a separate patch to avoid cluttering up some upcoming patches which
are more substantive. The point is basically to group everything
related to initializing the snapshot context together.
The only functional change is that rbd_header_from_disk() now
ensures the (in-core) header it is passed is zero-filled. This
allows a simpler error handling path in rbd_header_from_disk().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Fix a few spots in rbd_header_from_disk() to use sizeof (object)
rather than sizeof (type). Use a local variable to record sizes
to shorten some lines and improve readability.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Fix a number of spots where a pointer value that is known to
have become invalid but was not reset to null.
Also, toss in a change so we use sizeof (object) rather than
sizeof (type).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
The snap_names_len field of an rbd_image_header structure is defined
with type size_t. That field is used as both the source and target
of 64-bit byte-order swapping operations though, so it's best to
define it with type u64 instead.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
The purpose of __rbd_init_snaps_header() is to compare a new
snapshot context with an rbd device's list of existing snapshots.
It updates the list by adding any new snapshots or removing any
that are not present in the new snapshot context.
The code as written is a little confusing, because it traverses both
the existing snapshot list and the set of snapshots in the snapshot
context in reverse. This was done based on an assumption about
snapshots that is not true--namely that a duplicate snapshot name
could cause an error in intepreting things if they were not
processed in ascending order.
These precautions are not necessary, because:
- all snapshots are uniquely identified by their snapshot id
- a new snapshot cannot be created if the rbd device has another
snapshot with the same name
(It is furthermore not currently possible to rename a snapshot.)
This patch re-implements __rbd_init_snaps_header() so it passes
through both the existing snapshot list and the entries in the
snapshot context in forward order. It still does the same thing
as before, but I find the logic considerably easier to understand.
By going forward through the names in the snapshot context, there
is no longer a need for the rbd_prev_snap_name() helper function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
|
|
IBM reported a deadlock in select_parent(). This was found to be caused
by taking rename_lock when already locked when restarting the tree
traversal.
There are two cases when the traversal needs to be restarted:
1) concurrent d_move(); this can only happen when not already locked,
since taking rename_lock protects against concurrent d_move().
2) racing with final d_put() on child just at the moment of ascending
to parent; rename_lock doesn't protect against this rare race, so it
can happen when already locked.
Because of case 2, we need to be able to handle restarting the traversal
when rename_lock is already held. This patch fixes all three callers of
try_to_ascend().
IBM reported that the deadlock is gone with this patch.
[ I rewrote the patch to be smaller and just do the "goto again" if the
lock was already held, but credit goes to Miklos for the real work.
- Linus ]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Two small patches:
* One patch to fix the function declarations for
!CONFIG_IOMMU_API. This is causing build errors
in linux-next and should be fixed for v3.6.
* Another patch to fix an IOMMU group related NULL pointer
dereference."
* tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix wrong assumption in iommu-group specific code
iommu: static inline iommu group stub functions
|
|
Pull NVMe driver fixes from Matthew Wilcox:
"Now that actual hardware has been released (don't have any yet
myself), people are starting to want some of these fixes merged."
Willy doesn't have hardware? Guys...
* git://git.infradead.org/users/willy/linux-nvme:
NVMe: Cancel outstanding IOs on queue deletion
NVMe: Free admin queue memory on initialisation failure
NVMe: Use ida for nvme device instance
NVMe: Fix whitespace damage in nvme_init
NVMe: handle allocation failure in nvme_map_user_pages()
NVMe: Fix uninitialized iod compiler warning
NVMe: Do not set IO queue depth beyond device max
NVMe: Set block queue max sectors
NVMe: use namespace id for nvme_get_features
NVMe: replace nvme_ns with nvme_dev for user admin
NVMe: Fix nvme module init when nvme_major is set
NVMe: Set request queue logical block size
|
|
Sasha Levin has been running trinity in a KVM tools guest, and was able
to trigger the BUG_ON() at arch/x86/mm/pat.c:279 (verifying the range of
the memory type). The call trace showed that it was mtdchar_mmap() that
created an invalid remap_pfn_range().
The problem is that mtdchar_mmap() does various really odd and subtle
things with the vma page offset etc, and uses the wrong types (and the
wrong overflow) detection for it.
For example, the page offset may well be 32-bit on a 32-bit
architecture, but after shifting it up by PAGE_SHIFT, we need to use a
potentially 64-bit resource_size_t to correctly hold the full value.
Also, we need to check that the vma length plus offset doesn't overflow
before we check that it is smaller than the length of the mtdmap region.
This fixes things up and tries to make the code a bit easier to read.
Reported-and-tested-by: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David S Miller:
1) Netfilter xt_limit module can use uninitialized rules, from Jan
Engelhardt.
2) Wei Yongjun has found several more spots where error pointers were
treated as NULL/non-NULL and vice versa.
3) bnx2x was converted to pci_io{,un}map() but one remaining plain
iounmap() got missed. From Neil Horman.
4) Due to a fence-post type error in initialization of inetpeer entries
(which is where we store the ICMP rate limiting information), we can
erroneously drop ICMPs if the inetpeer was created right around when
jiffies wraps.
Fix from Nicolas Dichtel.
5) smsc75xx resume fix from Steve Glendinnig.
6) LAN87xx smsc chips need an explicit hardware init, from Marek Vasut.
7) qlcnic uses msleep() with locks held, fix from Narendra K.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
netdev: octeon: fix return value check in octeon_mgmt_init_phy()
inetpeer: fix token initialization
qlcnic: Fix scheduling while atomic bug
bnx2: Clean up remaining iounmap
net: phy: smsc: Implement PHY config_init for LAN87xx
smsc75xx: fix resume after device reset
netdev: pasemi: fix return value check in pasemi_mac_phy_init()
team: fix return value check
l2tp: fix return value check
netfilter: xt_limit: have r->cost != 0 case work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple of fixes; one for automount/lazy umount race, another a
classic "we don't protect the refcount transition to zero with the
lock that protects looking for object in hash" kind of crap in lockd."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
close the race in nlmsvc_free_block()
do_add_mount()/umount -l races
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML fixes from Richard Weinberger.
* 'for-linus-3.6-rc-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Preinclude include/linux/kern_levels.h
um: Fix IPC on um
um: kill thread->forking
um: let signal_delivered() do SIGTRAP on singlestepping into handler
um: don't leak floating point state and segment registers on execve()
um: take cleaning singlestep to start_thread()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm
Pull dm fixes from Alasdair G Kergon:
"A few fixes for problems discovered during the 3.6 cycle.
Of particular note, are fixes to the thin target's discard support,
which I hope is finally working correctly; and fixes for multipath
ioctls and device limits when there are no paths."
* tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
dm verity: fix overflow check
dm thin: fix discard support for data devices
dm thin: tidy discard support
dm: retain table limits when swapping to new table with no devices
dm table: clear add_random unless all devices have it set
dm: handle requests beyond end of device instead of using BUG_ON
dm mpath: only retry ioctl when no paths if queue_if_no_path set
dm thin: do not set discard_zeroes_data
|
|
__collapse_huge_page_copy
Speculative cache pagecache lookups can elevate the refcount from
under us, so avoid the false positive. If the refcount is < 2 we'll be
notified by a VM_BUG_ON in put_page_testzero as there are two
put_page(src_page) in a row before returning from this function.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The new IOMMU groups code in the AMD IOMMU driver makes the
assumption that there is a pci_dev struct available for all
device-ids listed in the IVRS ACPI table. Unfortunatly this
assumption is not true and so this code causes a NULL
pointer dereference at boot on some systems.
Fix it by making sure the given pointer is never NULL when
passed to the group specific code. The real fix is larger
and will be queued for v3.7.
Reported-by: Florian Dazinger <florian@dazinger.net>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
In case of error, the function of_phy_connect() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull drm fixes from Dave Airlie:
"The three nouveau fixes quiten unneeded dmesg spam that people are
seeing and pondering,
The udl fix stops it from trying to driver monitors that are too big,
where we get a black screen.
And a vmware memory alloc problem."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN
drm/udl: limit modes to the sku pixel limits.
vmwgfx: corruption in vmw_event_fence_action_create()
drm/nvc0/ltcg: mask off intr 0x10
drm/nouveau: silence a debug message triggered by newer userspace
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are two USB bugfixes for your 3.6-rc7 tree.
The OHCI fix has been reported a number of times and is a regression
from 3.5, and the patch that causes the regression was on the way to
the -stable trees before I was reminded (again) that this fix needed
to get to your tree soon.
The host controller bugfix was reported in older kernels as being
pretty easy to trigger, and has been tested by Red Hat and their
customers.
Both have been in the usb-next branch in the -next tree for a while
now, I just cherry-picked them out to get to you in time for the 3.6
release.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'usb-3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: Fix race condition when removing host controllers
USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
|
|
Also fix the calls to next_packet_size() for the pause case. This was
missed in 245baf983 ("ALSA: snd-usb: fix calls to next_packet_size").
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reported-and-tested-by: Christian Tefzer <ctrefzer@gmx.de>
Cc: stable@kernel.org
[ Taking directly because Takashi is on vacation - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound
Pull ASoC update from Mark Brown:
"One small and obvious driver-specific fix.
Takashi is on vacation now so he asked me to send directly, it's a
pretty bad bug with low regression risk."
* tag 'asoc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound:
ASoC: wm2000: Correct register size
|
|
When jiffies wraps around (for example, 5 minutes after the boot, see
INITIAL_JIFFIES) and peer has just been created, now - peer->rate_last can be
< XRLIM_BURST_FACTOR * timeout, so token is not set to the maximum value, thus
some icmp packets can be unexpectedly dropped.
Fix this case by initializing last_rate to 60 seconds in the past.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the device close path, 'qlcnic_fw_destroy_ctx' and
'qlcnic_poll_rsp' call msleep. But 'qlcnic_fw_destroy_ctx' and
'qlcnic_poll_rsp' are called with 'adapter->tx_clean_lock' spin lock
held resulting in scheduling while atomic bug causing the following
trace.
I observed that the commit 012dc19a45b2b9cc2ebd14aaa401cf782c2abba4
from John Fastabend addresses a similar issue in ixgbevf driver.
Adopting the same approach used in the commit, this patch uses mdelay
to address the issue.
[79884.999115] BUG: scheduling while atomic: ip/30846/0x00000002
[79885.005562] INFO: lockdep is turned off.
[79885.009958] Modules linked in: qlcnic fuse nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE bnep bluetooth rfkill ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables iptable_nat nf_nat iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables dcdbas coretemp kvm_intel kvm iTCO_wdt ixgbe iTCO_vendor_support crc32c_intel ghash_clmulni_intel nfsd microcode sb_edac pcspkr edac_core dca bnx2x shpchp auth_rpcgss nfs_acl lpc_ich mfd_core mdio lockd libcrc32c wmi acpi_pad acpi_power_meter sunrpc uinput sd_mod sr_mod cdrom crc_t10dif ahci libahci libata megaraid_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod [last unloaded: qlcnic]
[79885.083608] Pid: 30846, comm: ip Tainted: G W O 3.6.0-rc7+ #1
[79885.090805] Call Trace:
[79885.093569] [<ffffffff816764d8>] __schedule_bug+0x68/0x76
[79885.099699] [<ffffffff8168358e>] __schedule+0x99e/0xa00
[79885.105634] [<ffffffff81683929>] schedule+0x29/0x70
[79885.111186] [<ffffffff81680def>] schedule_timeout+0x16f/0x350
[79885.117724] [<ffffffff811afb7a>] ? init_object+0x4a/0x90
[79885.123770] [<ffffffff8107c190>] ? __internal_add_timer+0x140/0x140
[79885.130873] [<ffffffff81680fee>] schedule_timeout_uninterruptible+0x1e/0x20
[79885.138773] [<ffffffff8107e830>] msleep+0x20/0x30
[79885.144159] [<ffffffffa04c7fbf>] qlcnic_issue_cmd+0xef/0x290 [qlcnic]
[79885.151478] [<ffffffffa04c8265>] qlcnic_fw_cmd_destroy_rx_ctx+0x55/0x90 [qlcnic]
[79885.159868] [<ffffffffa04c92fd>] qlcnic_fw_destroy_ctx+0x2d/0xa0 [qlcnic]
[79885.167576] [<ffffffffa04bf2ed>] __qlcnic_down+0x11d/0x180 [qlcnic]
[79885.174708] [<ffffffffa04bf6f8>] qlcnic_close+0x18/0x20 [qlcnic]
[79885.181547] [<ffffffff8153b4c5>] __dev_close_many+0x95/0xe0
[79885.187899] [<ffffffff8153b548>] __dev_close+0x38/0x50
[79885.193761] [<ffffffff81545101>] __dev_change_flags+0xa1/0x180
[79885.200419] [<ffffffff81545298>] dev_change_flags+0x28/0x70
[79885.206779] [<ffffffff815531b8>] do_setlink+0x378/0xa00
[79885.212731] [<ffffffff81354fe1>] ? nla_parse+0x31/0xe0
[79885.218612] [<ffffffff815558ee>] rtnl_newlink+0x37e/0x560
[79885.224768] [<ffffffff812cfa19>] ? selinux_capable+0x39/0x50
[79885.231217] [<ffffffff812cbf98>] ? security_capable+0x18/0x20
[79885.237765] [<ffffffff81555114>] rtnetlink_rcv_msg+0x114/0x2f0
[79885.244412] [<ffffffff81551f87>] ? rtnl_lock+0x17/0x20
[79885.250280] [<ffffffff81551f87>] ? rtnl_lock+0x17/0x20
[79885.256148] [<ffffffff81555000>] ? __rtnl_unlock+0x20/0x20
[79885.262413] [<ffffffff81570fc1>] netlink_rcv_skb+0xa1/0xb0
[79885.268661] [<ffffffff81551fb5>] rtnetlink_rcv+0x25/0x40
[79885.274727] [<ffffffff815708bd>] netlink_unicast+0x19d/0x220
[79885.281146] [<ffffffff81570c45>] netlink_sendmsg+0x305/0x3f0
[79885.287595] [<ffffffff8152b188>] ? sock_update_classid+0x148/0x2e0
[79885.294650] [<ffffffff81525c2c>] sock_sendmsg+0xbc/0xf0
[79885.300600] [<ffffffff8152600c>] __sys_sendmsg+0x3ac/0x3c0
[79885.306853] [<ffffffff8109be23>] ? up_read+0x23/0x40
[79885.312510] [<ffffffff816896cc>] ? do_page_fault+0x2bc/0x570
[79885.318968] [<ffffffff81191854>] ? sys_brk+0x44/0x150
[79885.324715] [<ffffffff811c458c>] ? fget_light+0x24c/0x520
[79885.330875] [<ffffffff815286f9>] sys_sendmsg+0x49/0x90
[79885.336707] [<ffffffff8168e429>] system_call_fastpath+0x16/0x1b
Signed-off-by: Narendra K <narendra_k@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit c0357e975afdbbedab5c662d19bef865f02adc17 modified bnx2 to switch from
using ioremap/iounmap to pci_iomap/pci_iounmap. They missed a spot in the error
path of bnx2_init_one though. This patch just cleans that up.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Michael Chan <mcan@broadcom.com>
CC: "David S. Miller" <davem@davemloft.net>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull one more arm-soc bugfix from Olof Johansson:
"Here's a bugfix for orion5x. Without this, PCI doesn't initialize
properly because of too small coherent pool to cover the allocations
needed.
A similar fix has already been done on kirkwood."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: Orion5x: Fix too small coherent pool.
|
|
git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull ARM dma-mapping fix from Marek Szyprowski:
"This patch fixes a potential memory leak in the ARM dma-mapping code."
* 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
ARM: dma-mapping: Fix potential memory leak in atomic_pool_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"A late GPIO fix: Roland Stigge found a problem in the LPC32xx driver
where a callback ignores one of its arguments. It needs to go into
stable too so sending this upstream immediately."
* tag 'gpio-fixes-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio-lpc32xx: Fix value handling of gpio_direction_output()
|
|
Pull two md bugfixes from NeilBrown:
"One (missing spinlock init) was only introduced recently. The other
has been present as long as raid10 has been supported, so is tagged
for -stable."
* tag 'md-3.6-fixes' of git://neil.brown.name/md:
md/raid10: fix "enough" function for detecting if array is failed.
md/raid5: add missing spin_lock_init.
|
|
Pull EDAC fixes from Mauro Carvalho Chehab:
"Three edac fixes at the memory enumeration logic:
- i3200_edac: Fixes a regression at the memory rank size, when the
memorias are dual-rank;
- i5000_edac: Fix a longstanding bug when calculating the memory
size: before Kernel 3.6, the memory size were right only
with one specific configuration;
- sb_edac: Fixes a bug since the initial release of the driver:
with 16GB DIMMs, there's an overflow at the memory size,
causing the number of pages per dimm (an unsigned value)
to have the highest bit equal to 1, effectively mangling
the memory size.
The third bug can potentially affect the error decoding logic as well."
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
sb_edac: Avoid overflow errors at memory size calculation
i5000: Fix the memory size calculation with 2R memories
i3200_edac: Fix memory rank size
|
|
"Search list for X" sounds like you're trying to find X on a list.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The LAN8710/LAN8720 chips do have broken the "FlexPWR" smart power-saving
capability. Enabling it leads to the PHY not being able to detect Link when
cold-started without cable connected. Thus, make sure this is disabled.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christian Hohnstaedt <chohnstaedt@innominate.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
|