summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-04-16[media] r820t: disable auto gain/VGA settingMauro Carvalho Chehab
On field tests, the auto gain routine is not working, nor it is used by the original driver. Let's comment it for now. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] rtl2832: Fix IF calculusMauro Carvalho Chehab
Spectrum is inverted. So, we need to invert it when calculating the value for the IF register Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: put it into automatic gain modeMauro Carvalho Chehab
Currently, it is putting it on manual mode. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: Fix hp_cor filter maskMauro Carvalho Chehab
The bit mask was inverted here. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: fix PLL calculusMauro Carvalho Chehab
There are a few errors at the PLL calculus, causing the device to use wrong values. While here, change the calculus to use 32 bits, as there's no need for 64 bits there. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: Don't put it in standby if not initialized yetMauro Carvalho Chehab
r820t_standby() can be called before r820t_init(). If that happens, just do nothing. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: avoid rewrite all regs when not neededMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: Allow disabling IMR callibrationMauro Carvalho Chehab
The rtl-sdr library disabled IMR callibration. While I'm not sure yet why, it could be a good idea to add a modprobe parameter here, to allow to also disable it. There are two rationale behind it: - It helps to compare USB dumps between rtl-sdr and the Kernel module; - If rtl-sdr disabled it, perhaps there's a good reason (e. g. it might not be actually working, or it might be causing some trouble). For both cases, it seems useful to add a modprobe parameter to allow testing the device with both configurations. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: add a commented code for GPIOMauro Carvalho Chehab
Add the code to set the GPIO for this tuner. This code is currently unused, so it is kept there only for completeness. With this patch there are just two things that got left from the original driver: - At standby, there's another mode, not used by rtl2832u. Not sure if it might be needed in the future, but I suspect it is not used at all; - There is a "fast tune" mode. As nor DVB or V4L API supports it, it seems an overkill to implement it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: add IMR calibrate codeMauro Carvalho Chehab
This code seems to calibrate I/Q phase and gain during the device initialization. This is done only once, and it doesn't seem to be needed to happen after resuming. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: proper initialize the PLL registerMauro Carvalho Chehab
The rtl-sdr library, from where this driver was initially based, doesn't use half PLL clock, but this is used on the Realtek Kernel driver. So, also do the same here. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: use usleep_range()Mauro Carvalho Chehab
Instead of using msleep(), use sleep_range(), as it provides a closer sleep time. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: fix prefix of the r820t_read() functionMauro Carvalho Chehab
Just cosmetic changes: all other functions are prefixed by r820t. Do the same for r820t_read(). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: split the function that read cached regsMauro Carvalho Chehab
As we'll need to retrieve cached registers, make this function explicit. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: better report signal strengthMauro Carvalho Chehab
If signal is zero, shows it as a zero, not as 0xff. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: add support for diplexerMauro Carvalho Chehab
This is part of the original driver, and adding it doesn't hurt, so add it, to better sync the code. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: Show the read data in the bit-reversed orderMauro Carvalho Chehab
As the driver's logic uses the bit-reversed order for read, use it as well when displaying the debug messages. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: use the second table for 7MHzMauro Carvalho Chehab
The Realtek Kernel driver uses the second DVB-T 7MHz table instead of the first one. Use it as well. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: Invert bits for read opsMauro Carvalho Chehab
On read, the bit order is inverted. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] rtl2832: properly set en_bbin for r820tMauro Carvalho Chehab
DVBT_EN_BBIN should be set on both places where IF is set. So, move it to a function and call it where needed. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: use the right IF for the selected TV standardMauro Carvalho Chehab
IF is set at r820t_set_tv_standard(). So, we can't calculate LO frequency before calling it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] rtl2832: add code to bind r820t on itMauro Carvalho Chehab
There are some init stuff to be done for each new tuner at the demod code. Add the code there for r820t. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: Fix IF scaleMauro Carvalho Chehab
Scale used at get_if_freq and LO freq calculus is Hz. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] rtl820t: Add a debug msg when PLL gets lockedMauro Carvalho Chehab
[ 2255.342797] r820t 3-001a: generic_set_freq: PLL locked on frequency 725476191 Hz, gain=45 Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: proper lock and set the I2C gateMauro Carvalho Chehab
As this tuner can be used by analog and digital parts of the driver, be sure that all ops that access the hardware will be be properly locked. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] rtl28xxu: use r820t to obtain the signal strengthMauro Carvalho Chehab
Now that we can get the strength from r820t, use it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: Set gain mode to autoMauro Carvalho Chehab
This tuner works with 2 modes: automatic gain mode and manual gain mode. Put it into automatic mode, as we currently don't have any API for manual gain adjustment. The logic to allow setting the manual mode is there, as it is just a few extra code. This way, if/when we latter add support for setting the gain mode, the code is already there. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: Give a better estimation of the signal strengthMauro Carvalho Chehab
Instead of a binary signal strength measure, use the tuner gain to obtain a better estimation of the signal strength. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] rtl28xxu: add support for Rafael Micro r820tMauro Carvalho Chehab
This tuner is used on some rtl2882 dongles. Add it to the driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] r820t: Add a tuner driver for Rafael Micro R820T silicon tunerMauro Carvalho Chehab
This driver was written from scratch, based on an existing driver that it is part of rtl-sdr git tree, released under GPLv2: https://groups.google.com/forum/#!topic/ultra-cheap-sdr/Y3rBEOFtHug https://github.com/n1gp/gr-baz http://cgit.osmocom.org/rtl-sdr/plain/src/tuner_r820t.c (there are also other variants of it out there) >From what I understood from the threads, the original driver was converted to userspace from a Realtek tree. I couldn't find the original tree. However, the original driver look awkward on my eyes. So, I decided to write a new version from it from the scratch, while trying to reproduce everything found there. TODO: - After locking, the original driver seems to have some routines to improve reception. This was not implemented here yet. - RF Gain set/get is not implemented. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-16[media] sta2x11_vip: Fix compilation if I2C is not setMauro Carvalho Chehab
From Fengguang Wu <fengguang.wu@intel.com>: > drivers/media/pci/sta2x11/sta2x11_vip.c: In function 'sta2x11_vip_init_one': > drivers/media/pci/sta2x11/sta2x11_vip.c:1314:2: error: implicit declaration of function 'i2c_get_adapter' [-Werror=implicit-function-declaration] > drivers/media/pci/sta2x11/sta2x11_vip.c:1314:15: warning: assignment makes pointer from integer without a cast [enabled by default] > drivers/media/pci/sta2x11/sta2x11_vip.c:1330:2: error: implicit declaration of function 'i2c_put_adapter' [-Werror=implicit-function-declaration] And also: > warning: (STA2X11_VIP) selects VIDEO_ADV7180 which has unmet direct dependencies (MEDIA_SUPPORT && VIDEO_V4L2 && I2C) > drivers/media/i2c/adv7180.c: In function '__adv7180_status': > drivers/media/i2c/adv7180.c:194:2: error: implicit declaration of function 'i2c_smbus_read_byte_data' [-Werror=implicit-function-declaration] > drivers/media/i2c/adv7180.c: In function 'adv7180_s_routing': > drivers/media/i2c/adv7180.c:251:2: error: implicit declaration of function 'i2c_smbus_write_byte_data' [-Werror=implicit-function-declaration] > drivers/media/i2c/adv7180.c: In function 'adv7180_probe': > drivers/media/i2c/adv7180.c:551:2: error: implicit declaration of function 'i2c_check_functionality' [-Werror=implicit-function-declaration] > drivers/media/i2c/adv7180.c:554:2: error: implicit declaration of function 'i2c_adapter_id' [-Werror=implicit-function-declaration] > drivers/media/i2c/adv7180.c: At top level: > drivers/media/i2c/adv7180.c:663:1: warning: data definition has no type or storage class [enabled by default] > drivers/media/i2c/adv7180.c:663:1: warning: type defaults to 'int' in declaration of 'module_i2c_driver' [-Wimplicit-int] > drivers/media/i2c/adv7180.c:663:1: warning: parameter names (without types) in function declaration [enabled by default] > drivers/media/i2c/adv7180.c:649:26: warning: 'adv7180_driver' defined but not used [-Wunused-variable] This is due to the lack of I2C support: ... > CONFIG_I2C is not set ... So, Make sure that sta2x11_vip depends on I2C. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] it913x: rename its tuner driver to tuner_it913xMauro Carvalho Chehab
There are three drivers with *it913x name on it, and they all belong to the same device: a tuner, at it913x.c; a frontend: it913x-fe.c; a bridge: it913x.c, renamed to dvb_usb_it913x by the building system. This is confusing. Even more confusing are the two .c files with the same name under different directories, with different contents and different functions. So, prepend the tuner one. This also breaks the out-of-tree compilation system. Reported-by: Frederic Fays <frederic.fays@gmail.com> Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] mceusb: add some missing cmd sizesWilliam Steidtmann
Fix mceusb_cmdsize() which returns incorrect datasize=0 for sub-commands MCE_RSP_GETPORTSTATUS, MCE_RSP_GETWAKESOURCE, MCE_RSP_EQDEVDETAILS, MCE_RSP_EQEMVER, and MCE_RSP_EQIRNUMPORTS. While here, change mceusb_cmdsize() name to reflect that it returns data size not cmd size. Signed-off-by: William Steidtmann <billstei@hbci.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] zoran: Don't print proc_dir_entry data in debug [RFC]David Howells
Don't print proc_dir_entry data in debug as we're soon to have no direct access to the contents of the PDE. Print what was put in there instead. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] staging/media: fix go7007 dependencies and buildRandy Dunlap
VIDEO_GO7007 uses usb interfaces so it should depend on USB. It also selects CYPRESS_FIRMWARE, which depends on USB. Fixes build errors and a kconfig warning: go7007-loader.c:(.text+0xcc7d0): undefined reference to `usb_get_dev' go7007-loader.c:(.init.text+0x49f0): undefined reference to `usb_register_driver' go7007-loader.c:(.exit.text+0x17ce): undefined reference to `usb_deregister' warning: (DVB_USB_AZ6007 && VIDEO_GO7007) selects CYPRESS_FIRMWARE which has unmet direct dependencies (MEDIA_SUPPORT && USB) Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] em28xx: Put remaining .vidioc_g_chip_info instance under ADV_DEBUGMichal Marek
Commit cd634f1 ("[media] v4l2: put VIDIOC_DBG_G_CHIP_NAME under ADV_DEBUG") missed the initializer of radio_ioctl_ops: drivers/media/usb/em28xx/em28xx-video.c:1830:2: error: unknown field 'vidioc_g_chip_info' specified in initializer drivers/media/usb/em28xx/em28xx-video.c:1830:26: error: 'vidioc_g_chip_info' undeclared here (not in a function) Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-15[media] cxd2820r_t2: Fix a warning: stream_id is unsignedMauro Carvalho Chehab
drivers/media/dvb-frontends/cxd2820r_t2.c: In function 'cxd2820r_set_frontend_t2': drivers/media/dvb-frontends/cxd2820r_t2.c:128:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-15[media] MAINTAINERS: change entry for davinci media driverLad, Prabhakar
As of now TI has no maintainer/supporter for davinci media drivers, Until it has any I'll be maintaining it. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] rc: fix single line indentation of keymaps/MakefileAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] em28xx: map remote for 1b80:e425Antti Palosaari
Map RC_MAP_REDDO to that device. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] rc: add rc-reddoAntti Palosaari
It is very similar than rc-msi-digivox-iii but new keytable is needed as there is one existing scancode mapped to different button. Also that one has less buttons. NEC extended protocol with address 0x61d6. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] media: vb2: add length check for mmapSeung-Woo Kim
The length of mmap() can be bigger than length of vb2 buffer, so it should be checked. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] MAINTAINERS: add RTL2832 media driverAntti Palosaari
Driver author has disappeared, even mails are bouncing back. I will keep care with that as I have done for a while. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] MAINTAINERS: add DVB_USB_GL861Antti Palosaari
I have the hardware and I have already made almost all changes what are needed during the recent few years, so lets mark it as maintained. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] rc: ene_ir: fix potential double free in ene_probe()Wei Yongjun
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] rc: nuvoton-cir: fix potential double free in nvt_probe()Wei Yongjun
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] rc: ite-cir: fix potential double free in ite_probe()Wei Yongjun
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] rc: winbond-cir: fix potential double free in wbcir_probe()Wei Yongjun
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] MAINTAINERS: Mark the SH VOU driver as Odd FixesLaurent Pinchart
The driver isn't actively maintained anymore, update its status. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] soc-camera: fix typos in the default format-conversion tableGuennadi Liakhovetski
The default format conversion table mbus_fmt[] in soc_mediabus.c lists "natural" conversions between media-bus and fourcc pixel formats, that are achieved by storing data from the bus in RAM exactly as it arrives, only possibly padding missing high or low bits. Such data acquisition mode cannot change data endianness, therefore two locations with opposite endianness are erroneous. This change might affest the omap1-camera driver, existing configurations should be verified. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 13:38:32 +0000