summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-11-11mac80211: implement support for 4-address frames for AP and client modeFelix Fietkau
In some situations it might be useful to run a network with an Access Point and multiple clients, but with each client bridged to a network behind it. For this to work, both the client and the AP need to transmit 4-address frames, containing both source and destination MAC addresses. With this patch, you can configure a client to communicate using only 4-address frames for data traffic. On the AP side you can enable 4-address frames for individual clients by isolating them in separate AP VLANs which are configured in 4-address mode. Such an AP VLAN will be limited to one client only, and this client will be used as the destination for all traffic on its interface, regardless of the destination MAC address in the packet headers. The advantage of this mode compared to regular WDS mode is that it's easier to configure and does not require a static list of peer MAC addresses on any side. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11nl80211: add a parameter for using 4-address frames on virtual interfacesFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11mac80211: improve peer link management debuggingRui Paulo
Print the FSM state strings instead of just the numbers. Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Andrey Yurovsky <andrey@cozybit.com> Tested-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11mac80211: improve HWMP debuggingRui Paulo
Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Andrey Yurovsky <andrey@cozybit.com> Tested-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11mac80211: allow processing of more than one HWMP IERui Paulo
Since the HWMP IEs are now all optional and the action code is fixed, allow the HWMP code to find and process each IE on the path selection action frames. Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: Javier Cardona <rpaulo@cozybit.com> Reviewed-by: Andrey Yurovsky <andrey@cozybit.com> Tested-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11mac80211: add MAC80211_VERBOSE_MHWMP_DEBUGRui Paulo
Add MAC80211_VERBOSE_MHWMP_DEBUG, a debugging option for HWMP frame processing. Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Andrey Yurovsky <andrey@cozybit.com> Tested-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11mac80211: update the format of path selection framesRui Paulo
Update the format of path selection frames according to latest draft (3.03). Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Andrey Yurovsky <andrey@cozybit.com> Tested-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11mac80211: update peer link management IE and action framesRui Paulo
Update the length and format of the peer link management action frames. Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Andrey Yurovsky <andrey@cozybit.com> Tested-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11mac80211: fix typo in a commentRui Paulo
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Rui Paulo <rpaulo@gmail.com> Reviewed-by: Andrey Yurovsky <andrey@cozybit.com> Tested-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11mac80211: implement the meshconf formation info fieldRui Paulo
The Mesh Configuration Formation Info field contains the number of neighbors. This means that the beacon must be updated every time a peer joins or leaves. Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: Javier Cardona <rpaulo@gmail.com> Reviewed-by: Andrey Yurovsky <andrey@cozybit.com> Tested-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11mac80211: set MESH_TTL to 31Rui Paulo
Update the mesh time to live field to 31 according to draft 3.03. Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Andrey Yurovsky <andrey@cozybit.com> Tested-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11mac80211: update meshconf IERui Paulo
This updates the Mesh Configuration IE according to the latest draft (3.03). Notable changes include the simplified protocol IDs. Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Andrey Yurovsky <andrey@cozybit.com> Tested-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11rt2x00: Fix building of rt2800lib when rt2x00 driver is built-in.Gertjan van Wingerde
When enabling rt2800usb as a built-in driver (as opposed to a as a module) the build fails. See http://marc.info/?l=linux-wireless&m=125768687711034&w=2 for details. Fix it by properly including <linux/usb.h> from rt2x00usb.h Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11rt2x00: Move interface type assignments to generic code.Gertjan van Wingerde
Make sure all drivers can benefit of the assignment of the interface type of an adapter, instead of keeping it for rt2800 only. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11drivers/net/wireless: correct check on CCS_START_NETWORKJulia Lawall
CCS_START_NETWORK is declared in drivers/net/wireless/rayctl.h with the comment Values for cmd. status is previously compared to CCS_COMMAND_COMPLETE, which is declared in the same file with the comment Values for buffer_status. Finally, it is possible at this point that cmd is CCS_START_NETWORK, because it is compared to that value in an enclosing switch that has CCS_START_NETWORK as one of two case labels around this code. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11zd1211rw: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11zd1201: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11wl12xx: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11prism54: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11orinoco: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11mwl8k: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11libertas_tf_usb: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11libertas: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwmc3200wifi: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11ipw2200: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11ipw2100: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11atmel: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11at76c50x-usb: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11b43-pio: Fix RX error path for rev>=8 devicesMichael Buesch
This fixes the RX error path for rev>=8 devices. The wrong register size and definitions were used. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11staging/wireless: don't build when NET etc. are not enabledRandy Dunlap
These wireless drivers in staging could be built when CONFIG_NET=n, CONFIG_NETDEVICES=n, causing this build error: net/wireless/wext-priv.c: In function 'ioctl_private_call': net/wireless/wext-priv.c:206: error: implicit declaration of function 'call_commit_handler' due to faulty selects. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: MAC_ACCESS_REQ cleanupBen Cahill
Add txq_id info to "Tx queue requesting wakeup" debug message Add "Rx queue requesting wakeup" debug message Move clear of CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ to be after nearby iwl_write_prph(), since iwl_write_prph() sets it and clears it. Almost removed it entirely, but just making sure in case someone removes the iwl_write_prph()! Also remove unneeded priv->lock usage; this is now handled by priv->reg_lock within iwl_clear_bit(). Join a couple of lines that had unneeded line returns. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: Fix issue on file transfer stalled in HT modeWey-Yi Guy
Turn on RTS/CTS for HT to prevent uCode TX fifo underrun This is fix for http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2103 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Tested-by: Jiajia Zheng <jiajia.zheng@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlagn: update write pointers in iwl_irq_tasklet()Ben Cahill
Follow-up to "update write pointers for all tx queues after wakeup"; that patch changed iwl_irq_tasklet_legacy(), but not iwl_irq_tasklet(), so newer devices were not covered. Comments from original patch: Wakeup interrupt has been updating write pointers (indexes, actually) only for tx queues 0-5. This is adequate just for 3945, but inadequate for other devices, all of which have more tx queues. Now updating all tx/command queues, so device can be aware of all new tx and host commands enqueued while device was asleep. This can potentially improve data traffic bandwidth and/or latency. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: Add comments about MAC_ACCESS_REQBen Cahill
Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: Update comments for struct iwl_ssid_ieBen Cahill
Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: speed up event log dumpsBen Cahill
Take advantage of device's auto-increment for SRAM reads to eliminate extra write address accesses. Grab/release NIC access before/after entire read sequence, rather than for each read individually. After a quick check of dmesg logs, this seems to double Event Log dump speed, reducing from about 20 milliseconds to about 10 milliseconds for 512 entries using 3945. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: Limit size of Event Log dumpBen Cahill
If device provides bad values for Event Log parameters (due to being asleep or SRAM corruption, etc.), the size can be very, very large (e.g. 0xa5a5a5a5), which can flood system log. Sanity-check capacity and next_entry values and limit to reasonable size dump. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: do not base station's sm_ps setting on APWey-Yi Guy
Do not use AP's SM_PS setting for our own SM_PS setting. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: drop non-production PCI-IDsWey-Yi Guy
Remove the support for all the PCI_IDs never make into production Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: fix for channel switchWey-Yi Guy
Different channel has different configuration, need to pass correct configuration to uCode when send "channel switch" command to uCode. Invalid configuration will cause sysassert in uCode and produce un-expected result. Even it is a very small windows, but we also need to consider and handle the case if commit_rxon occurred before the "channel switch announcement" notification received from uCode. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: add FIFO usage for 5000Johannes Berg
This is part of the code, but the comment doesn't have it, add pointers to the code and the FIFO usage for 5000 and up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: remove un-used parameterWey-Yi Guy
Remove un-used parameter "recovery_rxon" from "priv" data structure Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: fix FIFO vs. queue confusionJohannes Berg
When I added that code setting the swq_id, I evidently did not understand the distinction between FIFO and TX queue yet and added code to compare a queue ID and a FIFO number, which is bogus. However, the code there need not be this specific, it can just set all queues to the identity mapping which will be overwritten by the aggregation queue code. As a bit of defensive coding, don't assign an swq_id to the command queue so that if we ever use it for frames we notice quickly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: don't double-activate queue 4Johannes Berg
The fourth queue (command queue) is already activated in the loop above that also maps it to the command FIFO and therefore doesn't need to be marked as activated again. Also change the TODO comment to be accurate -- we need to initialise the _queues_, not FIFOs, and map them to device FIFOs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: no periodic Tx/IQ calibration for 6x00/6x50 seriesWey-Yi Guy
For both 6x00 and 6x50 series devices, periodic Tx IQ calibration is disabled in uCode, driver do not need to set the periodic Tx/IQ calibration bit in calibration command. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: use configured valid rx chain for scanShanyu Zhao
Use configured valid rx chains in scan command instead of ANT_ABC, correcting valid rx chain configuration of 4965, should be ANT_ABC instead of ANT_AB. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: use only one chain for scan in PSShanyu Zhao
When doing scan in power saving mode, choose only 1 valid RX chain instead of turning all chains on. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: print rx_on config to help debugWey-Yi Guy
To help debug rx related issues, if IWL_DEBUG_RADIO flag is set, print the rxon configuration when rxon host command send to uCode. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: allocate 128 bytes linear buffer for rx skbZhu Yi
Allocate 128 bytes linear buffer for rx skb. The first 64 bytes is reserved for mac80211 usage (for radiotap header expansion, etc). The frame header starts from the second 64 bytes. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: change debug message to error in failure caseReinette Chatre
Since these messages indicate failure we would be interested in seeing them always. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-26 20:32:31 +0000