summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-21jbd2: fix use after free in jbd2_log_do_checkpoint()Jan Kara
commit ccd3c4373eacb044eb3832966299d13d2631f66f upstream. The code cleaning transaction's lists of checkpoint buffers has a bug where it increases bh refcount only after releasing journal->j_list_lock. Thus the following race is possible: CPU0 CPU1 jbd2_log_do_checkpoint() jbd2_journal_try_to_free_buffers() __journal_try_to_free_buffer(bh) ... while (transaction->t_checkpoint_io_list) ... if (buffer_locked(bh)) { <-- IO completes now, buffer gets unlocked --> spin_unlock(&journal->j_list_lock); spin_lock(&journal->j_list_lock); __jbd2_journal_remove_checkpoint(jh); spin_unlock(&journal->j_list_lock); try_to_free_buffers(page); get_bh(bh) <-- accesses freed bh Fix the problem by grabbing bh reference before unlocking journal->j_list_lock. Fixes: dc6e8d669cf5 ("jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()") Fixes: be1158cc615f ("jbd2: fold __process_buffer() into jbd2_log_do_checkpoint()") Reported-by: syzbot+7f4a27091759e2fe7453@syzkaller.appspotmail.com CC: stable@vger.kernel.org Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21libnvdimm: Hold reference on parent while scheduling async initAlexander Duyck
commit b6eae0f61db27748606cc00dafcfd1e2c032f0a5 upstream. Unlike asynchronous initialization in the core we have not yet associated the device with the parent, and as such the device doesn't hold a reference to the parent. In order to resolve that we should be holding a reference on the parent until the asynchronous initialization has completed. Cc: <stable@vger.kernel.org> Fixes: 4d88a97aa9e8 ("libnvdimm: ...base ... infrastructure") Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21net/ipv4: defensive cipso option parsingStefan Nuernberger
commit 076ed3da0c9b2f88d9157dbe7044a45641ae369e upstream. commit 40413955ee26 ("Cipso: cipso_v4_optptr enter infinite loop") fixed a possible infinite loop in the IP option parsing of CIPSO. The fix assumes that ip_options_compile filtered out all zero length options and that no other one-byte options beside IPOPT_END and IPOPT_NOOP exist. While this assumption currently holds true, add explicit checks for zero length and invalid length options to be safe for the future. Even though ip_options_compile should have validated the options, the introduction of new one-byte options can still confuse this code without the additional checks. Signed-off-by: Stefan Nuernberger <snu@amazon.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Simon Veith <sveith@amazon.de> Cc: stable@vger.kernel.org Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21xen: make xen_qlock_wait() nestableJuergen Gross
commit a856531951dc8094359dfdac21d59cee5969c18e upstream. xen_qlock_wait() isn't safe for nested calls due to interrupts. A call of xen_qlock_kick() might be ignored in case a deeper nesting level was active right before the call of xen_poll_irq(): CPU 1: CPU 2: spin_lock(lock1) spin_lock(lock1) -> xen_qlock_wait() -> xen_clear_irq_pending() Interrupt happens spin_unlock(lock1) -> xen_qlock_kick(CPU 2) spin_lock_irqsave(lock2) spin_lock_irqsave(lock2) -> xen_qlock_wait() -> xen_clear_irq_pending() clears kick for lock1 -> xen_poll_irq() spin_unlock_irq_restore(lock2) -> xen_qlock_kick(CPU 2) wakes up spin_unlock_irq_restore(lock2) IRET resumes in xen_qlock_wait() -> xen_poll_irq() never wakes up The solution is to disable interrupts in xen_qlock_wait() and not to poll for the irq in case xen_qlock_wait() is called in nmi context. Cc: stable@vger.kernel.org Cc: Waiman.Long@hp.com Cc: peterz@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21xen: fix race in xen_qlock_wait()Juergen Gross
commit 2ac2a7d4d9ff4e01e36f9c3d116582f6f655ab47 upstream. In the following situation a vcpu waiting for a lock might not be woken up from xen_poll_irq(): CPU 1: CPU 2: CPU 3: takes a spinlock tries to get lock -> xen_qlock_wait() frees the lock -> xen_qlock_kick(cpu2) -> xen_clear_irq_pending() takes lock again tries to get lock -> *lock = _Q_SLOW_VAL -> *lock == _Q_SLOW_VAL ? -> xen_poll_irq() frees the lock -> xen_qlock_kick(cpu3) And cpu 2 will sleep forever. This can be avoided easily by modifying xen_qlock_wait() to call xen_poll_irq() only if the related irq was not pending and to call xen_clear_irq_pending() only if it was pending. Cc: stable@vger.kernel.org Cc: Waiman.Long@hp.com Cc: peterz@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21tpm: Restore functionality to xen vtpm driver.Dr. Greg Wettstein
commit e487a0f52301293152a6f8c4e217f2a11dd808e3 upstream. Functionality of the xen-tpmfront driver was lost secondary to the introduction of xenbus multi-page support in commit ccc9d90a9a8b ("xenbus_client: Extend interface to support multi-page ring"). In this commit pointer to location of where the shared page address is stored was being passed to the xenbus_grant_ring() function rather then the address of the shared page itself. This resulted in a situation where the driver would attach to the vtpm-stubdom but any attempt to send a command to the stub domain would timeout. A diagnostic finding for this regression is the following error message being generated when the xen-tpmfront driver probes for a device: <3>vtpm vtpm-0: tpm_transmit: tpm_send: error -62 <3>vtpm vtpm-0: A TPM error (-62) occurred attempting to determine the timeouts This fix is relevant to all kernels from 4.1 forward which is the release in which multi-page xenbus support was introduced. Daniel De Graaf formulated the fix by code inspection after the regression point was located. Fixes: ccc9d90a9a8b ("xenbus_client: Extend interface to support multi-page ring") Signed-off-by: Dr. Greg Wettstein <greg@enjellic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [boris: Updated commit message, added Fixes tag] Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org # v4.1+ Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-21xen-swiotlb: use actually allocated size on check physical continuousJoe Jin
commit 7250f422da0480d8512b756640f131b9b893ccda upstream. xen_swiotlb_{alloc,free}_coherent() allocate/free memory based on the order of the pages and not size argument (bytes). This is inconsistent with range_straddles_page_boundary and memset which use the 'size' value, which may lead to not exchanging memory with Xen (range_straddles_page_boundary() returned true). And then the call to xen_swiotlb_free_coherent() would actually try to exchange the memory with Xen, leading to the kernel hitting an BUG (as the hypercall returned an error). This patch fixes it by making the 'size' variable be of the same size as the amount of memory allocated. CC: stable@vger.kernel.org Signed-off-by: Joe Jin <joe.jin@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Christoph Helwig <hch@lst.de> Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: John Sobecki <john.sobecki@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21ALSA: hda: Check the non-cached stream buffers more explicitlyTakashi Iwai
[ Upstream commit 78c9be61c3a5cd9e2439fd27a5ffad73a81958c7 ] Introduce a new flag, uc_buffer, to indicate that the controller requires the non-cached pages for stream buffers, either as a chip-specific requirement or specified via snoop=0 option. This improves the code-readability. Also, this patch fixes the incorrect behavior for C-Media chip where the stream buffers were never handled as non-cached due to the check of driver_type even if you pass snoop=0 option. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21dmaengine: dma-jz4780: Return error if not probed from DTPaul Cercueil
[ Upstream commit 54f919a04cf221bc1601d1193682d4379dacacbd ] The driver calls clk_get() with the clock name set to NULL, which means that the driver could only work when probed from devicetree. From now on, we explicitly require the driver to be probed from devicetree. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21signal: Always deliver the kernel's SIGKILL and SIGSTOP to a pid namespace initEric W. Biederman
[ Upstream commit 3597dfe01d12f570bc739da67f857fd222a3ea66 ] Instead of playing whack-a-mole and changing SEND_SIG_PRIV to SEND_SIG_FORCED throughout the kernel to ensure a pid namespace init gets signals sent by the kernel, stop allowing a pid namespace init to ignore SIGKILL or SIGSTOP sent by the kernel. A pid namespace init is only supposed to be able to ignore signals sent from itself and children with SIG_DFL. Fixes: 921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals") Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21scsi: lpfc: Correct soft lockup when running mds diagnosticsJames Smart
[ Upstream commit 0ef01a2d95fd62bb4f536e7ce4d5e8e74b97a244 ] When running an mds diagnostic that passes frames with the switch, soft lockups are detected. The driver is in a CQE processing loop and has sufficient amount of traffic that it never exits the ring processing routine, thus the "lockup". Cap the number of elements in the work processing routine to 64 elements. This ensures that the cpu will be given up and the handler reschedule to process additional items. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21uio: ensure class is registered before devicesAlexandre Belloni
[ Upstream commit ae61cf5b9913027c6953a79ed3894da4f47061bd ] When both uio and the uio drivers are built in the kernel, it is possible for a driver to register devices before the uio class is registered. This may result in a NULL pointer dereference later on in get_device_parent() when accessing the class glue_dirs spinlock. The trace looks like that: Unable to handle kernel NULL pointer dereference at virtual address 00000140 [...] [<ffff0000089cc234>] _raw_spin_lock+0x14/0x48 [<ffff0000084f56bc>] device_add+0x154/0x6a0 [<ffff0000084f5e48>] device_create_groups_vargs+0x120/0x128 [<ffff0000084f5edc>] device_create+0x54/0x60 [<ffff0000086e72c0>] __uio_register_device+0x120/0x4a8 [<ffff000008528b7c>] jaguar2_pci_probe+0x2d4/0x558 [<ffff0000083fc18c>] local_pci_probe+0x3c/0xb8 [<ffff0000083fd81c>] pci_device_probe+0x11c/0x180 [<ffff0000084f88bc>] driver_probe_device+0x22c/0x2d8 [<ffff0000084f8a24>] __driver_attach+0xbc/0xc0 [<ffff0000084f69fc>] bus_for_each_dev+0x4c/0x98 [<ffff0000084f81b8>] driver_attach+0x20/0x28 [<ffff0000084f7d08>] bus_add_driver+0x1b8/0x228 [<ffff0000084f93c0>] driver_register+0x60/0xf8 [<ffff0000083fb918>] __pci_register_driver+0x40/0x48 Return EPROBE_DEFER in that case so the driver can register the device later. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21driver/dma/ioat: Call del_timer_sync() without holding prep_lockWaiman Long
[ Upstream commit cfb03be6c7e8a1591285849c361d67b09f5149f7 ] The following lockdep splat was observed: [ 1222.241750] ====================================================== [ 1222.271301] WARNING: possible circular locking dependency detected [ 1222.301060] 4.16.0-10.el8+5.x86_64+debug #1 Not tainted [ 1222.326659] ------------------------------------------------------ [ 1222.356565] systemd-shutdow/1 is trying to acquire lock: [ 1222.382660] ((&ioat_chan->timer)){+.-.}, at: [<00000000f71e1a28>] del_timer_sync+0x5/0xf0 [ 1222.422928] [ 1222.422928] but task is already holding lock: [ 1222.451743] (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma] : [ 1223.524987] Chain exists of: [ 1223.524987] (&ioat_chan->timer) --> &(&ioat_chan->cleanup_lock)->rlock --> &(&ioat_chan->prep_lock)->rlock [ 1223.524987] [ 1223.594082] Possible unsafe locking scenario: [ 1223.594082] [ 1223.622630] CPU0 CPU1 [ 1223.645080] ---- ---- [ 1223.667404] lock(&(&ioat_chan->prep_lock)->rlock); [ 1223.691535] lock(&(&ioat_chan->cleanup_lock)->rlock); [ 1223.728657] lock(&(&ioat_chan->prep_lock)->rlock); [ 1223.765122] lock((&ioat_chan->timer)); [ 1223.784095] [ 1223.784095] *** DEADLOCK *** [ 1223.784095] [ 1223.813492] 4 locks held by systemd-shutdow/1: [ 1223.834677] #0: (reboot_mutex){+.+.}, at: [<0000000056d33456>] SYSC_reboot+0x10f/0x300 [ 1223.873310] #1: (&dev->mutex){....}, at: [<00000000258dfdd7>] device_shutdown+0x1c8/0x660 [ 1223.913604] #2: (&dev->mutex){....}, at: [<0000000068331147>] device_shutdown+0x1d6/0x660 [ 1223.954000] #3: (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma] In the ioat_shutdown() function: spin_lock_bh(&ioat_chan->prep_lock); set_bit(IOAT_CHAN_DOWN, &ioat_chan->state); del_timer_sync(&ioat_chan->timer); spin_unlock_bh(&ioat_chan->prep_lock); According to the synchronization rule for the del_timer_sync() function, the caller must not hold locks which would prevent completion of the timer's handler. The timer structure has its own lock that manages its synchronization. Setting the IOAT_CHAN_DOWN bit should prevent other CPUs from trying to use that device anyway, there is probably no need to call del_timer_sync() while holding the prep_lock. So the del_timer_sync() call is now moved outside of the prep_lock critical section to prevent the circular lock dependency. Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21usb: chipidea: Prevent unbalanced IRQ disableLoic Poulain
[ Upstream commit 8b97d73c4d72a2abf58f8e49062a7ee1e5f1334e ] The ChipIdea IRQ is disabled before scheduling the otg work and re-enabled on otg work completion. However if the job is already scheduled we have to undo the effect of disable_irq int order to balance the IRQ disable-depth value. Fixes: be6b0c1bd0be ("usb: chipidea: using one inline function to cover queue work operations") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21MD: fix invalid stored role for a diskShaohua Li
[ Upstream commit d595567dc4f0c1d90685ec1e2e296e2cad2643ac ] If we change the number of array's device after device is removed from array, then add the device back to array, we can see that device is added as active role instead of spare which we expected. Please see the below link for details: https://marc.info/?l=linux-raid&m=153736982015076&w=2 This is caused by that we prefer to use device's previous role which is recorded by saved_raid_disk, but we should respect the new number of conf->raid_disks since it could be changed after device is removed. Reported-by: Gioh Kim <gi-oh.kim@profitbricks.com> Tested-by: Gioh Kim <gi-oh.kim@profitbricks.com> Acked-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21ext4: fix argument checking in EXT4_IOC_MOVE_EXTTheodore Ts'o
[ Upstream commit f18b2b83a727a3db208308057d2c7945f368e625 ] If the starting block number of either the source or destination file exceeds the EOF, EXT4_IOC_MOVE_EXT should return EINVAL. Also fixed the helper function mext_check_coverage() so that if the logical block is beyond EOF, make it return immediately, instead of looping until the block number wraps all the away around. This takes long enough that if there are multiple threads trying to do pound on an the same inode doing non-sensical things, it can end up triggering the kernel's soft lockup detector. Reported-by: syzbot+c61979f6f2cba5cb3c06@syzkaller.appspotmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivatedJavier Martinez Canillas
[ Upstream commit 0d6d0d62d9505a9816716aa484ebd0b04c795063 ] For TPM 1.2 chips the system setup utility allows to set the TPM device in one of the following states: * Active: Security chip is functional * Inactive: Security chip is visible, but is not functional * Disabled: Security chip is hidden and is not functional When choosing the "Inactive" state, the TPM 1.2 device is enumerated and registered, but sending TPM commands fail with either TPM_DEACTIVATED or TPM_DISABLED depending if the firmware deactivated or disabled the TPM. Since these TPM 1.2 error codes don't have special treatment, inactivating the TPM leads to a very noisy kernel log buffer that shows messages like the following: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: A TPM error (6) occurred attempting to read a pcr value tpm tpm0: TPM is disabled/deactivated (0x6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting to read a pcr value ima: No TPM chip found, activating TPM-bypass! (rc=6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED} return codes, since this is expected when the TPM 1.2 is set to Inactive. In that case the kernel log is cleaner and less confusing for users, i.e: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: TPM is disabled/deactivated (0x6) ima: No TPM chip found, activating TPM-bypass! (rc=6) Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21scsi: megaraid_sas: fix a missing-check bugWenwen Wang
[ Upstream commit 47db7873136a9c57c45390a53b57019cf73c8259 ] In megasas_mgmt_compat_ioctl_fw(), to handle the structure compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket 'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle the packet. Since the two data structures have different fields, the data is copied from 'cioc' to 'ioc' field by field. In the copy process, 'sense_ptr' is prepared if the field 'sense_len' is not null, because it will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and saved to kernel-space variables 'local_sense_off' and 'user_sense_off' respectively. Given that 'ioc->sense_off' is also copied from 'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the same value. However, 'cioc' is in the user space and a malicious user can race to change the value of 'cioc->sense_off' after it is copied to 'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing so, the attacker can inject different values into 'local_sense_off' and 'user_sense_off'. This can cause undefined behavior in the following execution, because the two variables are supposed to be same. This patch enforces a check on the two kernel variables 'local_sense_off' and 'user_sense_off' to make sure they are the same after the copy. In case they are not, an error code EINVAL will be returned. Signed-off-by: Wenwen Wang <wang6495@umn.edu> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21scsi: esp_scsi: Track residual for PIO transfersFinn Thain
[ Upstream commit fd47d919d0c336e7c22862b51ee94927ffea227a ] If a target disconnects during a PIO data transfer the command may fail when the target reconnects: scsi host1: DMA length is zero! scsi host1: cur adr[04380000] len[00000000] The scsi bus is then reset. This happens because the residual reached zero before the transfer was completed. The usual residual calculation relies on the Transfer Count registers. That works for DMA transfers but not for PIO transfers. Fix the problem by storing the PIO transfer residual and using that to correctly calculate bytes_sent. Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21ath10k: schedule hardware restart if WMI command times outMartin Willi
[ Upstream commit a9911937e7d332761e8c4fcbc7ba0426bdc3956f ] When running in AP mode, ath10k sometimes suffers from TX credit starvation. The issue is hard to reproduce and shows up once in a few days, but has been repeatedly seen with QCA9882 and a large range of firmwares, including 10.2.4.70.67. Once the module is in this state, TX credits are never replenished, which results in "SWBA overrun" errors, as no beacons can be sent. Even worse, WMI commands run in a timeout while holding the conf mutex for three seconds each, making any further operations slow and the whole system unresponsive. The firmware/driver never recovers from that state automatically, and triggering TX flush or warm restarts won't work over WMI. So issue a hardware restart if a WMI command times out due to missing TX credits. This implies a connectivity outage of about 1.4s in AP mode, but brings back the interface and the whole system to a usable state. WMI command timeouts have not been seen in absent of this specific issue, so taking such drastic actions seems legitimate. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() to be compliantDouglas Anderson
[ Upstream commit b432414b996d32a1bd9afe2bd595bd5729c1477f ] If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice it looks like nonsense. The problem is fairly well described in commit 1cf86bc21257 ("pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be compliant"), but it was pointed out that ssbi-gpio has the same problem. Let's fix it there too. Fixes: b4c45fe974bc ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliantDouglas Anderson
[ Upstream commit 0d5b476f8f57fcb06c45fe27681ac47254f63fd2 ] If you look at "pinconf-groups" in debugfs for ssbi-mpp you'll notice it looks like nonsense. The problem is fairly well described in commit 1cf86bc21257 ("pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be compliant"), but it was pointed out that ssbi-mpp has the same problem. Let's fix it there too. NOTE: in case it's helpful to someone reading this, the way to tell whether to do the -EINVAL or not is to look at the PCONFDUMP for a given attribute. If the last element (has_arg) is false then you need to do the -EINVAL trick. ALSO NOTE: it seems unlikely that the values returned when we try to get PIN_CONFIG_BIAS_PULL_UP will actually be printed since "has_arg" is false for that one, but I guess it's still fine to return different values so I kept doing that. It seems like another driver (ssbi-gpio) uses a custom attribute (PM8XXX_QCOM_PULL_UP_STRENGTH) for something similar so maybe a future change should do that here too. Fixes: cfb24f6ebd38 ("pinctrl: Qualcomm SPMI PMIC MPP pin controller driver") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21pinctrl: qcom: spmi-mpp: Fix drive strength settingStephen Boyd
[ Upstream commit 89c68b102f13f123aaef22b292526d6b92501334 ] It looks like we parse the drive strength setting here, but never actually write it into the hardware to update it. Parse the setting and then write it at the end of the pinconf setting function so that it actually sticks in the hardware. Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") Cc: Doug Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllersHans de Goede
[ Upstream commit 240714061c58e6b1abfb3322398a7634151c06cb ] Bay and Cherry Trail DSTDs represent a different set of devices depending on which OS the device think it is booting. One set of decices for Windows and another set of devices for Android which targets the Android-x86 Linux kernel fork (which e.g. used to have its own display driver instead of using the i915 driver). Which set of devices we are actually going to get is out of our control, this is controlled by the ACPI OSID variable, which gets either set through an EFI setup option, or sometimes is autodetected. So we need to support both. This commit adds support for the 80862286 and 808622C0 ACPI HIDs which we get for the first resp. second DMA controller on Cherry Trail devices when OSID is set to Android. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()Masami Hiramatsu
[ Upstream commit 819319fc93461c07b9cdb3064f154bd8cfd48172 ] Make reuse_unused_kprobe() to return error code if it fails to reuse unused kprobe for optprobe instead of calling BUG_ON(). Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/153666124040.21306.14150398706331307654.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_muxYueHaibing
[ Upstream commit 69f8455f6cc78fa6cdf80d0105d7a748106271dc ] 'ret' should be returned while pmic_mpp_write_mode_ctl fails. Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21x86: boot: Fix EFI stub alignmentBen Hutchings
[ Upstream commit 9c1442a9d039a1a3302fa93e9a11001c5f23b624 ] We currently align the end of the compressed image to a multiple of 16. However, the PE-COFF header included in the EFI stub says that the file alignment is 32 bytes, and when adding an EFI signature to the file it must first be padded to this alignment. sbsigntool commands warn about this: warning: file-aligned section .text extends beyond end of file warning: checksum areas are greater than image size. Invalid section table? Worse, pesign -at least when creating a detached signature- uses the hash of the unpadded file, resulting in an invalid signature if padding is required. Avoid both these problems by increasing alignment to 32 bytes when CONFIG_EFI_STUB is enabled. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21Bluetooth: btbcm: Add entry for BCM4335C0 UART bluetoothChristian Hewitt
[ Upstream commit a357ea098c9605f60d92a66a9073f56ce25726da ] This patch adds the device ID for the AMPAK AP6335 combo module used in the 1st generation WeTek Hub Android/LibreELEC HTPC box. The WiFI chip identifies itself as BCM4339, while Bluetooth identifies itself as BCM4335 (rev C0): ``` [ 4.864248] Bluetooth: hci0: BCM: chip id 86 [ 4.866388] Bluetooth: hci0: BCM: features 0x2f [ 4.889317] Bluetooth: hci0: BCM4335C0 [ 4.889332] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0000 [ 9.778383] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0268 ``` Output from hciconfig: ``` hci0: Type: Primary Bus: UART BD Address: 43:39:00:00:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:7567 acl:234 sco:0 events:386 errors:0 TX bytes:53844 acl:77 sco:0 commands:304 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'HUB' Class: 0x0c0000 Service Classes: Rendering, Capturing Device Class: Miscellaneous, HCI Version: 4.0 (0x6) Revision: 0x10c LMP Version: 4.0 (0x6) Subversion: 0x6109 Manufacturer: Broadcom Corporation (15) ``` Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01Yu Zhao
[ Upstream commit 5169894982bb67486d93cc1e10151712bb86bcb6 ] This device reports SDHCI_CLOCK_INT_STABLE even though it's not ready to take SDHCI_CLOCK_CARD_EN. The symptom is that reading SDHCI_CLOCK_CONTROL after enabling the clock shows absence of the bit from the register (e.g. expecting 0x0000fa07 = 0x0000fa03 | SDHCI_CLOCK_CARD_EN but only observed the first operand). mmc1: Timeout waiting for hardware cmd interrupt. mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00000603 mmc1: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 mmc1: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000001 mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa03 mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 mmc1: sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083 mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 mmc1: sdhci: Caps: 0x25fcc8bf | Caps_1: 0x00002077 mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x005800c8 mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 mmc1: sdhci: Host ctl2: 0x00000008 mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000 mmc1: sdhci: ============================================ The problem happens during wakeup from S3. Adding a delay quirk after power up reliably fixes the problem. Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21perf tools: Cleanup trace-event-info 'tdata' leakSanskriti Sharma
[ Upstream commit faedbf3fd19f2511a39397f76359e4cc6ee93072 ] Free tracing_data structure in tracing_data_get() error paths. Fixes the following coverity complaint: Error: RESOURCE_LEAK (CWE-772): leaked_storage: Variable "tdata" going out of scope leaks the storage Signed-off-by: Sanskriti Sharma <sansharm@redhat.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Link: http://lkml.kernel.org/r/1538490554-8161-3-git-send-email-sansharm@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21perf tools: Free temporary 'sys' string in read_event_files()Sanskriti Sharma
[ Upstream commit 1e44224fb0528b4c0cc176bde2bb31e9127eb14b ] For each system in a given pevent, read_event_files() reads in a temporary 'sys' string. Be sure to free this string before moving onto to the next system and/or leaving read_event_files(). Fixes the following coverity complaints: Error: RESOURCE_LEAK (CWE-772): tools/perf/util/trace-event-read.c:343: overwrite_var: Overwriting "sys" in "sys = read_string()" leaks the storage that "sys" points to. tools/perf/util/trace-event-read.c:353: leaked_storage: Variable "sys" going out of scope leaks the storage it points to. Signed-off-by: Sanskriti Sharma <sansharm@redhat.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Link: http://lkml.kernel.org/r/1538490554-8161-6-git-send-email-sansharm@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21tun: Consistently configure generic netdev params via rtnetlinkSerhey Popovych
[ Upstream commit df52eab23d703142c766ac00bdb8db19d71238d0 ] Configuring generic network device parameters on tun will fail in presence of IFLA_INFO_KIND attribute in IFLA_LINKINFO nested attribute since tun_validate() always return failure. This can be visualized with following ip-link(8) command sequences: # ip link set dev tun0 group 100 # ip link set dev tun0 group 100 type tun RTNETLINK answers: Invalid argument with contrast to dummy and veth drivers: # ip link set dev dummy0 group 100 # ip link set dev dummy0 type dummy # ip link set dev veth0 group 100 # ip link set dev veth0 group 100 type veth Fix by returning zero in tun_validate() when @data is NULL that is always in case since rtnl_link_ops->maxtype is zero in tun driver. Fixes: f019a7a594d9 ("tun: Implement ip link del tunXXX") Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21swim: fix cleanup on setup errorOmar Sandoval
[ Upstream commit 1448a2a5360ae06f25e2edc61ae070dff5c0beb4 ] If we fail to allocate the request queue for a disk, we still need to free that disk, not just the previous ones. Additionally, we need to cleanup the previous request queues. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21ataflop: fix error handling during setupOmar Sandoval
[ Upstream commit 71327f547ee3a46ec5c39fdbbd268401b2578d0e ] Move queue allocation next to disk allocation to fix a couple of issues: - If add_disk() hasn't been called, we should clear disk->queue before calling put_disk(). - If we fail to allocate a request queue, we still need to put all of the disks, not just the ones that we allocated queues for. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21locking/lockdep: Fix debug_locks off performance problemWaiman Long
[ Upstream commit 9506a7425b094d2f1d9c877ed5a78f416669269b ] It was found that when debug_locks was turned off because of a problem found by the lockdep code, the system performance could drop quite significantly when the lock_stat code was also configured into the kernel. For instance, parallel kernel build time on a 4-socket x86-64 server nearly doubled. Further analysis into the cause of the slowdown traced back to the frequent call to debug_locks_off() from the __lock_acquired() function probably due to some inconsistent lockdep states with debug_locks off. The debug_locks_off() function did an unconditional atomic xchg to write a 0 value into debug_locks which had already been set to 0. This led to severe cacheline contention in the cacheline that held debug_locks. As debug_locks is being referenced in quite a few different places in the kernel, this greatly slow down the system performance. To prevent that trashing of debug_locks cacheline, lock_acquired() and lock_contended() now checks the state of debug_locks before proceeding. The debug_locks_off() function is also modified to check debug_locks before calling __debug_locks_off(). Signed-off-by: Waiman Long <longman@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1539913518-15598-1-git-send-email-longman@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21selftests: ftrace: Add synthetic event syntax testcaseMasami Hiramatsu
[ Upstream commit ba0e41ca81b935b958006c7120466e2217357827 ] Add a testcase to check the syntax and field types for synthetic_events interface. Link: http://lkml.kernel.org/r/153986838264.18251.16627517536956299922.stgit@devbox Acked-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21net: qla3xxx: Remove overflowing shift statementNathan Chancellor
[ Upstream commit 8c3bf9b62b667456a57aefcf1689e826df146159 ] Clang currently warns: drivers/net/ethernet/qlogic/qla3xxx.c:384:24: warning: signed shift result (0xF00000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] ((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data)); ~~~~~~~~~~~~~~ ^ ~~ 1 warning generated. The warning is certainly accurate since ISP_NVRAM_MASK is defined as (0x000F << 16) which is then shifted by 16, resulting in 64424509440, well above UINT_MAX. Given that this is the only location in this driver where ISP_NVRAM_MASK is shifted again, it seems likely that ISP_NVRAM_MASK was originally defined without a shift and during the move of the shift to the definition, this statement wasn't properly removed (since ISP_NVRAM_MASK is used in the statenent right above this). Only the maintainers can confirm this since this statment has been here since the driver was first added to the kernel. Link: https://github.com/ClangBuiltLinux/linux/issues/127 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21x86/fpu: Remove second definition of fpu in __fpu__restore_sig()Sebastian Andrzej Siewior
[ Upstream commit 6aa676761d4c1acfa31320e55fa1f83f3fcbbc7a ] Commit: c5bedc6847c3b ("x86/fpu: Get rid of PF_USED_MATH usage, convert it to fpu->fpstate_active") introduced the 'fpu' variable at top of __restore_xstate_sig(), which now shadows the other definition: arch/x86/kernel/fpu/signal.c:318:28: warning: symbol 'fpu' shadows an earlier one arch/x86/kernel/fpu/signal.c:271:20: originally declared here Remove the shadowed definition of 'fpu', as the two definitions are the same. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: c5bedc6847c3b ("x86/fpu: Get rid of PF_USED_MATH usage, convert it to fpu->fpstate_active") Link: http://lkml.kernel.org/r/20181016202525.29437-3-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21sparc: Fix single-pcr perf event counter management.David S. Miller
[ Upstream commit cfdc3170d214046b9509183fe9b9544dc644d40b ] It is important to clear the hw->state value for non-stopped events when they are added into the PMU. Otherwise when the event is scheduled out, we won't read the counter because HES_UPTODATE is still set. This breaks 'perf stat' and similar use cases, causing all the events to show zero. This worked for multi-pcr because we make explicit sparc_pmu_start() calls in calculate_multiple_pcrs(). calculate_single_pcr() doesn't do this because the idea there is to accumulate all of the counter settings into the single pcr value. So we have to add explicit hw->state handling there. Like x86, we use the PERF_HES_ARCH bit to track truly stopped events so that we don't accidently start them on a reload. Related to all of this, sparc_pmu_start() is missing a userpage update so add it. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21x86/kconfig: Fall back to ticket spinlocksDaniel Wagner
Sebastian writes: """ We reproducibly observe cache line starvation on a Core2Duo E6850 (2 cores), a i5-6400 SKL (4 cores) and on a NXP LS2044A ARM Cortex-A72 (4 cores). The problem can be triggered with a v4.9-RT kernel by starting cyclictest -S -p98 -m -i2000 -b 200 and as "load" stress-ng --ptrace 4 The reported maximal latency is usually less than 60us. If the problem triggers then values around 400us, 800us or even more are reported. The upperlimit is the -i parameter. Reproduction with 4.9-RT is almost immediate on Core2Duo, ARM64 and SKL, but it took 7.5 hours to trigger on v4.14-RT on the Core2Duo. Instrumentation show always the picture: CPU0 CPU1 => do_syscall_64 => do_syscall_64 => SyS_ptrace => syscall_slow_exit_work => ptrace_check_attach => ptrace_do_notify / rt_read_unlock => wait_task_inactive rt_spin_lock_slowunlock() -> while task_running() __rt_mutex_unlock_common() / check_task_state() mark_wakeup_next_waiter() | raw_spin_lock_irq(&p->pi_lock); raw_spin_lock(&current->pi_lock); | . . | raw_spin_unlock_irq(&p->pi_lock); . \ cpu_relax() . - . *IRQ* <lock acquired> In the error case we observe that the while() loop is repeated more than 5000 times which indicates that the pi_lock can be acquired. CPU1 on the other side does not make progress waiting for the same lock with interrupts disabled. This continues until an IRQ hits CPU0. Once CPU0 starts processing the IRQ the other CPU is able to acquire pi_lock and the situation relaxes. """ This matches with the observeration for v4.4-rt on a Core2Duo E6850: CPU 0: - no progress for a very long time in rt_mutex_dequeue_pi): stress-n-1931 0d..11 5060.891219: function: __try_to_take_rt_mutex stress-n-1931 0d..11 5060.891219: function: rt_mutex_dequeue stress-n-1931 0d..21 5060.891220: function: rt_mutex_enqueue_pi stress-n-1931 0....2 5060.891220: signal_generate: sig=17 errno=0 code=262148 comm=stress-ng-ptrac pid=1928 grp=1 res=1 stress-n-1931 0d..21 5060.894114: function: rt_mutex_dequeue_pi stress-n-1931 0d.h11 5060.894115: local_timer_entry: vector=239 CPU 1: - IRQ at 5060.894114 on CPU 1 followed by the IRQ on CPU 0 stress-n-1928 1....0 5060.891215: sys_enter: NR 101 (18, 78b, 0, 0, 17, 788) stress-n-1928 1d..11 5060.891216: function: __try_to_take_rt_mutex stress-n-1928 1d..21 5060.891216: function: rt_mutex_enqueue_pi stress-n-1928 1d..21 5060.891217: function: rt_mutex_dequeue_pi stress-n-1928 1....1 5060.891217: function: rt_mutex_adjust_prio stress-n-1928 1d..11 5060.891218: function: __rt_mutex_adjust_prio stress-n-1928 1d.h10 5060.894114: local_timer_entry: vector=239 Thomas writes: """ This has nothing to do with RT. RT is merily exposing the problem in an observable way. The same issue happens with upstream, it's harder to trigger and it's harder to observe for obvious reasons. If you read through the discussions [see the links below] then you really see that there is an upstream issue with the x86 qrlock implementation and Peter has posted fixes which resolve it, both at the practical and the theoretical level. """ Backporting all qspinlock related patches is very likely to introduce regressions on v4.4. Therefore, the recommended solution by Peter and Thomas is to drop back to ticket spinlocks for v4.4. Link :https://lkml.kernel.org/r/20180921120226.6xjgr4oiho22ex75@linutronix.de Link: https://lkml.kernel.org/r/20180926110117.405325143@infradead.org Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21x86/corruption-check: Fix panic in memory_corruption_check() when boot ↵He Zhe
option without value is provided commit ccde460b9ae5c2bd5e4742af0a7f623c2daad566 upstream. memory_corruption_check[{_period|_size}]()'s handlers do not check input argument before passing it to kstrtoul() or simple_strtoull(). The argument would be a NULL pointer if each of the kernel parameters, without its value, is set in command line and thus cause the following panic. PANIC: early exception 0xe3 IP 10:ffffffff73587c22 error 0 cr2 0x0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #2 [ 0.000000] RIP: 0010:kstrtoull+0x2/0x10 ... [ 0.000000] Call Trace [ 0.000000] ? set_corruption_check+0x21/0x49 [ 0.000000] ? do_early_param+0x4d/0x82 [ 0.000000] ? parse_args+0x212/0x330 [ 0.000000] ? rdinit_setup+0x26/0x26 [ 0.000000] ? parse_early_options+0x20/0x23 [ 0.000000] ? rdinit_setup+0x26/0x26 [ 0.000000] ? parse_early_param+0x2d/0x39 [ 0.000000] ? setup_arch+0x2f7/0xbf4 [ 0.000000] ? start_kernel+0x5e/0x4c2 [ 0.000000] ? load_ucode_bsp+0x113/0x12f [ 0.000000] ? secondary_startup_64+0xa5/0xb0 This patch adds checks to prevent the panic. Signed-off-by: He Zhe <zhe.he@windriver.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: gregkh@linuxfoundation.org Cc: kstewart@linuxfoundation.org Cc: pombredanne@nexb.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1534260823-87917-1-git-send-email-zhe.he@windriver.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21ALSA: ca0106: Disable IZD on SB0570 DAC to fix audio popsAlex Stanoev
commit ac237c28d5ac1b241d58b1b7b4b9fa10efb22fb5 upstream. The Creative Audigy SE (SB0570) card currently exhibits an audible pop whenever playback is stopped or resumed, or during silent periods of an audio stream. Initialise the IZD bit to the 0 to eliminate these pops. The Infinite Zero Detection (IZD) feature on the DAC causes the output to be shunted to Vcap after 2048 samples of silence. This discharges the AC coupling capacitor through the output and causes the aforementioned pop/click noise. The behaviour of the IZD bit is described on page 15 of the WM8768GEDS datasheet: "With IZD=1, applying MUTE for 1024 consecutive input samples will cause all outputs to be connected directly to VCAP. This also happens if 2048 consecutive zero input samples are applied to all 6 channels, and IZD=0. It will be removed as soon as any channel receives a non-zero input". I believe the second sentence might be referring to IZD=1 instead of IZD=0 given the observed behaviour of the card. This change should make the DAC initialisation consistent with Creative's Windows driver, as this popping persists when initialising the card in Linux and soft rebooting into Windows, but is not present on a cold boot to Windows. Signed-off-by: Alex Stanoev <alex@astanoev.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21ALSA: hda - Add mic quirk for the Lenovo G50-30 (17aa:3905)Jeremy Cline
commit e7bb6ad5685f05685dd8a6a5eda7bfcd14d5f95b upstream. The Lenovo G50-30, like other G50 models, has a Conexant codec that requires a quirk for its inverted stereo dmic. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1249364 Reported-by: Alexander Ploumistos <alex.ploumistos@gmail.com> Tested-by: Alexander Ploumistos <alex.ploumistos@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21parisc: Fix map_pages() to not overwrite existing pte entriesHelge Deller
commit 3c229b3f2dd8133f61bb81d3cb018be92f4bba39 upstream. Fix a long-existing small nasty bug in the map_pages() implementation which leads to overwriting already written pte entries with zero, *if* map_pages() is called a second time with an end address which isn't aligned on a pmd boundry. This happens for example if we want to remap only the text segment read/write in order to run alternative patching on the code. Exiting the loop when we reach the end address fixes this. Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21parisc: Fix address in HPMC IVAJohn David Anglin
commit 1138b6718ff74d2a934459643e3754423d23b5e2 upstream. Helge noticed that the address of the os_hpmc handler was not being correctly calculated in the hpmc macro. As a result, PDCE_CHECK would fail to call os_hpmc: <Cpu2> e800009802e00000 0000000000000000 CC_ERR_CHECK_HPMC <Cpu2> 37000f7302e00000 8040004000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu2> f600105e02e00000 fffffff0f0c00000 CC_MC_HPMC_MONARCH_SELECTED <Cpu2> 140003b202e00000 000000000000000b CC_ERR_HPMC_STATE_ENTRY <Cpu2> 5600100b02e00000 00000000000001a0 CC_MC_OS_HPMC_LEN_ERR <Cpu2> 5600106402e00000 fffffff0f0438e70 CC_MC_BR_TO_OS_HPMC_FAILED <Cpu2> e800009802e00000 0000000000000000 CC_ERR_CHECK_HPMC <Cpu2> 37000f7302e00000 8040004000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu2> 4000109f02e00000 0000000000000000 CC_MC_HPMC_INITIATED <Cpu2> 4000101902e00000 0000000000000000 CC_MC_MULTIPLE_HPMCS <Cpu2> 030010d502e00000 0000000000000000 CC_CPU_STOP The address problem can be seen by dumping the fault vector: 0000000040159000 <fault_vector_20>: 40159000: 63 6f 77 73 stb r15,-2447(dp) 40159004: 20 63 61 6e ldil L%b747000,r3 40159008: 20 66 6c 79 ldil L%-1c3b3000,r3 ... 40159020: 08 00 02 40 nop 40159024: 20 6e 60 02 ldil L%15d000,r3 40159028: 34 63 00 00 ldo 0(r3),r3 4015902c: e8 60 c0 02 bv,n r0(r3) 40159030: 08 00 02 40 nop 40159034: 00 00 00 00 break 0,0 40159038: c0 00 70 00 bb,*< r0,sar,40159840 <fault_vector_20+0x840> 4015903c: 00 00 00 00 break 0,0 Location 40159038 should contain the physical address of os_hpmc: 000000004015d000 <os_hpmc>: 4015d000: 08 1a 02 43 copy r26,r3 4015d004: 01 c0 08 a4 mfctl iva,r4 4015d008: 48 85 00 68 ldw 34(r4),r5 This patch moves the address setup into initialize_ivt to resolve the above problem. I tested the change by dumping the HPMC entry after setup: 0000000040209020: 8000240 0000000040209024: 206a2004 0000000040209028: 34630ac0 000000004020902c: e860c002 0000000040209030: 8000240 0000000040209034: 1bdddce6 0000000040209038: 15d000 000000004020903c: 1a0 Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21ipmi: Fix timer race with module unloadJan Glauber
commit 0711e8c1b4572d076264e71b0002d223f2666ed7 upstream. Please note that below oops is from an older kernel, but the same race seems to be present in the upstream kernel too. ---8<--- The following panic was encountered during removing the ipmi_ssif module: [ 526.352555] Unable to handle kernel paging request at virtual address ffff000006923090 [ 526.360464] Mem abort info: [ 526.363257] ESR = 0x86000007 [ 526.366304] Exception class = IABT (current EL), IL = 32 bits [ 526.372221] SET = 0, FnV = 0 [ 526.375269] EA = 0, S1PTW = 0 [ 526.378405] swapper pgtable: 4k pages, 48-bit VAs, pgd = 000000008ae60416 [ 526.385185] [ffff000006923090] *pgd=000000bffcffe803, *pud=000000bffcffd803, *pmd=0000009f4731a003, *pte=0000000000000000 [ 526.396141] Internal error: Oops: 86000007 [#1] SMP [ 526.401008] Modules linked in: nls_iso8859_1 ipmi_devintf joydev input_leds ipmi_msghandler shpchp sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear i2c_smbus hid_generic usbhid uas hid usb_storage ast aes_ce_blk i2c_algo_bit aes_ce_cipher qede ttm crc32_ce ptp crct10dif_ce drm_kms_helper ghash_ce syscopyarea sha2_ce sysfillrect sysimgblt pps_core fb_sys_fops sha256_arm64 sha1_ce mpt3sas qed drm raid_class ahci scsi_transport_sas libahci gpio_xlp i2c_xlp9xx aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [last unloaded: ipmi_ssif] [ 526.468085] CPU: 125 PID: 0 Comm: swapper/125 Not tainted 4.15.0-35-generic #38~lp1775396+build.1 [ 526.476942] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL022 08/14/2018 [ 526.484932] pstate: 00400009 (nzcv daif +PAN -UAO) [ 526.489713] pc : 0xffff000006923090 [ 526.493198] lr : call_timer_fn+0x34/0x178 [ 526.497194] sp : ffff000009b0bdd0 [ 526.500496] x29: ffff000009b0bdd0 x28: 0000000000000082 [ 526.505796] x27: 0000000000000002 x26: ffff000009515188 [ 526.511096] x25: ffff000009515180 x24: ffff0000090f1018 [ 526.516396] x23: ffff000009519660 x22: dead000000000200 [ 526.521696] x21: ffff000006923090 x20: 0000000000000100 [ 526.526995] x19: ffff809eeb466a40 x18: 0000000000000000 [ 526.532295] x17: 000000000000000e x16: 0000000000000007 [ 526.537594] x15: 0000000000000000 x14: 071c71c71c71c71c [ 526.542894] x13: 0000000000000000 x12: 0000000000000000 [ 526.548193] x11: 0000000000000001 x10: ffff000009b0be88 [ 526.553493] x9 : 0000000000000000 x8 : 0000000000000005 [ 526.558793] x7 : ffff80befc1f8528 x6 : 0000000000000020 [ 526.564092] x5 : 0000000000000040 x4 : 0000000020001b20 [ 526.569392] x3 : 0000000000000000 x2 : ffff809eeb466a40 [ 526.574692] x1 : ffff000006923090 x0 : ffff809eeb466a40 [ 526.579992] Process swapper/125 (pid: 0, stack limit = 0x000000002eb50acc) [ 526.586854] Call trace: [ 526.589289] 0xffff000006923090 [ 526.592419] expire_timers+0xc8/0x130 [ 526.596070] run_timer_softirq+0xec/0x1b0 [ 526.600070] __do_softirq+0x134/0x328 [ 526.603726] irq_exit+0xc8/0xe0 [ 526.606857] __handle_domain_irq+0x6c/0xc0 [ 526.610941] gic_handle_irq+0x84/0x188 [ 526.614679] el1_irq+0xe8/0x180 [ 526.617822] cpuidle_enter_state+0xa0/0x328 [ 526.621993] cpuidle_enter+0x34/0x48 [ 526.625564] call_cpuidle+0x44/0x70 [ 526.629040] do_idle+0x1b8/0x1f0 [ 526.632256] cpu_startup_entry+0x2c/0x30 [ 526.636174] secondary_start_kernel+0x11c/0x130 [ 526.640694] Code: bad PC value [ 526.643800] ---[ end trace d020b0b8417c2498 ]--- [ 526.648404] Kernel panic - not syncing: Fatal exception in interrupt [ 526.654778] SMP: stopping secondary CPUs [ 526.658734] Kernel Offset: disabled [ 526.662211] CPU features: 0x5800c38 [ 526.665688] Memory Limit: none [ 526.668768] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Prevent mod_timer from arming a timer that was already removed by del_timer during module unload. Signed-off-by: Jan Glauber <jglauber@cavium.com> Cc: <stable@vger.kernel.org> # 3.19 Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21pcmcia: Implement CLKRUN protocol disabling for Ricoh bridgesMaciej S. Szmigiero
commit 95691e3eddc41da2d1cd3cca51fecdfb46bd85bc upstream. Currently, "disable_clkrun" yenta_socket module parameter is only implemented for TI CardBus bridges. Add also an implementation for Ricoh bridges that have the necessary setting documented in publicly available datasheets. Tested on a RL5C476II with a Sunrich C-160 CardBus NIC that doesn't work correctly unless the CLKRUN protocol is disabled. Let's also make it clear in its description that the "disable_clkrun" module parameter only works on these two previously mentioned brands of CardBus bridges. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Cc: stable@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21jffs2: free jffs2_sb_info through jffs2_kill_sb()Hou Tao
commit 92e2921f7eee63450a5f953f4b15dc6210219430 upstream. When an invalid mount option is passed to jffs2, jffs2_parse_options() will fail and jffs2_sb_info will be freed, but then jffs2_sb_info will be used (use-after-free) and freeed (double-free) in jffs2_kill_sb(). Fix it by removing the buggy invocation of kfree() when getting invalid mount options. Fixes: 92abc475d8de ("jffs2: implement mount option parsing and compression overriding") Cc: stable@kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21hwmon: (pmbus) Fix page count auto-detection.Dmitry Bazhenov
commit e7c6a55606b5c46b449d76588968b4d8caae903f upstream. Devices with compatible="pmbus" field have zero initial page count, and pmbus_clear_faults() being called before the page count auto- detection does not actually clear faults because it depends on the page count. Non-cleared faults in its turn may fail the subsequent page count auto-detection. This patch fixes this problem by calling pmbus_clear_fault_page() for currently set page and calling pmbus_clear_faults() after the page count was detected. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Bazhenov <bazhenov.dn@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21bcache: fix miss key refill->end in writebackTang Junhui
commit 2d6cb6edd2c7fb4f40998895bda45006281b1ac5 upstream. refill->end record the last key of writeback, for example, at the first time, keys (1,128K) to (1,1024K) are flush to the backend device, but the end key (1,1024K) is not included, since the bellow code: if (bkey_cmp(k, refill->end) >= 0) { ret = MAP_DONE; goto out; } And in the next time when we refill writeback keybuf again, we searched key start from (1,1024K), and got a key bigger than it, so the key (1,1024K) missed. This patch modify the above code, and let the end key to be included to the writeback key buffer. Signed-off-by: Tang Junhui <tang.junhui.linux@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 04:43:19 +0000