summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-05Input: cyttsp - add missing handshakeFerruh Yigit
For the devices that has blocking with timeout communication, these extra handshakes will prevent one timeout delay in startup sequence Tested-by: Ferruh Yigit <fery@cypress.com> on TMA300-DVK Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-05Input: cyttsp - fix memcpy size paramFerruh Yigit
memcpy param is wrong because of offset in bl_cmd, this may corrupt the stack which may cause a crash. Tested-by: Ferruh Yigit <fery@cypress.com> on TMA300-DVK Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-04Input: wacom - fix a typo for Cintiq 22HDTPing Cheng
And make the lines easier to read. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-04Input: synaptics - fix sync lost after resume on some laptopsEric Miao
In summary, the symptom is intermittent key events lost after resume on some machines with synaptics touchpad (seems this is synaptics _only_), and key events loss is due to serio port reconnect after psmouse sync lost. Removing psmouse and inserting it back during the suspend/resume process is able to work around the issue, so the difference between psmouse_connect() and psmouse_reconnect() is the key to the root cause of this problem. After comparing the two different paths, synaptics driver has its own implementation of synaptics_reconnect(), and the missing psmouse_probe() seems significant, the patch below added psmouse_probe() to the reconnect process, and has been verified many times that the issue could not be reliably reproduced. There are two PS/2 commands in psmouse_probe(): 1. PSMOUSE_CMD_GETID 2. PSMOUSE_CMD_RESET_DIS Only the PSMOUSE_CMD_GETID seems to be significant. The PSMOUSE_CMD_RESET_DIS is irrelevant to this issue after trying several times. So we have only implemented this patch to issue the PSMOUSE_CMD_GETID so far. Tested-by: Daniel Manrique <daniel.manrique@canonical.com> Signed-off-by: James M Leddy <james.leddy@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-23Input: wacom - add an eraser to DTH2242/DTK2241Ping Cheng
plus send begin and end of express keys events for Cintiq 13HD and DTH2242/DTK2241 Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-05Input: wacom - add a few new styli for Cintiq seriesPing Cheng
Add new styli for Cintiq 13HD and 22HD. Update comments for for tools. Check whole 10 nibbles of tool ID for tool types. Remove unuecessary tool type for Intuos series PAD. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-05Input: wacom - add three new display tabletsPing Cheng
Cintiq 13HD, DTK 2241, and Cintiq 22HDT are supported. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-05Input: egalax_ts - ABS_MT_POSITION_Y not reported wellHeiko Abraham
The egalax_ts touchscreen modul not report ABS_MT_POSITION_Y proper. As result it may be, that upper software levels only receive x coordinates well. Signed-off-by: Heiko Abraham <abrahamh@web.de> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-01Merge branch 'next' into for-linusDmitry Torokhov
Prepare first set of updates for 3.10 merge window.
2013-04-19Input: trackpoint - Optimize trackpoint init to use power-on resetShawn Nematbakhsh
The trackpoint driver sets various parameter default values, all of which happen to be power-on defaults (Source: IBM TrackPoint Engineering Specification, Version 4.0. Also confirmed by empirical data). By sending the power-on reset command to reset all parameters to power-on state, we can skip the lengthy process of programming all parameters. In testing, ~2.5 secs of time writing parameters was reduced to .35 seconds waiting for power-on reset to complete. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-19Input: wacom - fix "can not retrieve extra class descriptor" for DTH2242Ping Cheng
Same as Cintiq 24HDT, DTH2242 has two interfaces sharing one configuration. This patch ignores the second interface. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-19Input: wacom - DTH2242 Grip Pen id was off by one bitPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: apbps2 - convert to devm_ioremap_resource()Sachin Kamat
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: ALPS - use %ph to print buffersDmitry Torokhov
This form is more concise. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15ARM - shmobile: Armadillo800EVA: Move st1232 reset pin handlingBastian Hecht
We no longer need to set up the reset pin for the st1232 in the board code, but can pass the GPIO number via the platform data to the driver. This results in a cleaner grouping of the device setup. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: st1232 - add reset pin handlingBastian Hecht
We add the possibility to hand over a GPIO number for the reset pin. This way we can remove existing board code that takes care of it and group this information properly in the platform data or in the device tree configuration. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: st1232 - convert to devm_* infrastructureLaurent Pinchart
Use the devm_* managed functions to allocate resources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: wacom - correct reported resolution for Intuos4 WirelessJason Gerecke
Reported-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: wacom - fix "can not retrieve extra class descriptor" for 24HDTJason Gerecke
The MFT device in the Cintiq 24HDT has two interfaces sharing the same configuration. Without this patch, the driver attempts to make use of both interfaces, even though the second interface is not compatible with this driver. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: MT - handle semi-mt devices in coreHenrik Rydberg
Most semi-mt drivers use the slots in a manual way, but really only need to treat the finger count manually. With this patch, a semi-mt driver may use the input-mt core for everything else. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: adxl34x - use spi_get_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: ad7877 - use spi_get_drvdata() and spi_set_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: ads7846 - use spi_get_drvdata() and spi_set_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-01Input: ims-pcu - fix a memory leak on errorDmitry Torokhov
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-01Input: sysrq - supplement reset sequence with timeout functionalityMathieu J. Poirier
Some devices have too few buttons, which it makes it hard to have a reset combo that won't trigger automatically. As such a timeout functionality that requires the combination to be held for a given amount of time before triggering is introduced. If a key combo is recognized and held for a 'timeout' amount of time, the system triggers a reset. If the timeout value is omitted the driver simply ignores the functionality. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: tegra-kbc - support for defining row/columns based on SoCLaxman Dewangan
NVIDIA's Tegra20 and Tegra30 supports the 16x8 keyboard matrix and T114 support the 11x8 Key matrix. Add support for defining the maximum row/columns based on SoC through proper compatibility. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: imx_keypad - switch to using managed resourcesFabio Estevam
Using devm_ functions can make the code cleaner and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: arc_ps2 - add support for device treeMischa Jonker
Add match table for device tree binding and dts binding doc. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: mma8450 - fix signed 12bits to 32bits conversionSebastien Royen
Event value is wrong. Should be in range -2048 to 2047, but is in range 0 to 4095. Use s8 to int conversion and remove 0xfff mask. Signed-off-by: Sebastien Royen <sebastien.royen@armadeus.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: eeti_ts - remove redundant null checkSachin Kamat
'pdata' is already dereferenced earlier. Hence this check is meaningless. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: edt-ft5x06 - remove redundant null check before kfreeSachin Kamat
kfree on a null pointer is a no-op. Hence null check is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-26Input: ad714x - add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/misc/ad714x-i2c.c:17:12: warning: 'ad714x_i2c_suspend' defined but not used [-Wunused-function] drivers/input/misc/ad714x-i2c.c:22:12: warning: 'ad714x_i2c_resume' defined but not used [-Wunused-function] drivers/input/misc/ad714x-spi.c:20:12: warning: 'ad714x_spi_suspend' defined but not used [-Wunused-function] drivers/input/misc/ad714x-spi.c:25:12: warning: 'ad714x_spi_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-26Input: adxl34x - add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/misc/adxl34x-spi.c:98:12: warning: 'adxl34x_spi_suspend' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-spi.c:108:12: warning: 'adxl34x_spi_resume' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-i2c.c:109:12: warning: 'adxl34x_i2c_suspend' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-i2c.c:119:12: warning: 'adxl34x_i2c_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: mc13783_ts - use module_platform_driver_probe()Fabio Porcedda
This patch converts the drivers to use the module_platform_driver_probe() macro which makes the code smaller and a bit simpler. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: atmel-wm97xx - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: q40kbd - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: at32psif - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: amimouse - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: nomadik-ske-keypad - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: amikbd - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: twl4030-pwrbutton - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: davinci_keyscan - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() simplifies the code by eliminating boilerplate code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: tegra-kbc - convert to devm_ioremap_resource()Sachin Kamat
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Merge tag 'v3.9-rc3' into nextDmitry Torokhov
Merge with mainline to bring in module_platform_driver_probe() and devm_ioremap_resource().
2013-03-17Linux 3.9-rc3Linus Torvalds
2013-03-17perf,x86: fix link failure for non-Intel configsDavid Rientjes
Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") introduces a link failure since perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL: arch/x86/power/built-in.o: In function `restore_processor_state': (.text+0x45c): undefined reference to `perf_restore_debug_store' Fix it by defining the dummy function appropriately. Signed-off-by: David Rientjes <rientjes@google.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-17perf,x86: fix wrmsr_on_cpu() warning on suspend/resumeLinus Torvalds
Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") fixed a crash when doing PEBS performance profiling after resuming, but in using init_debug_store_on_cpu() to restore the DS_AREA mtrr it also resulted in a new WARN_ON() triggering. init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU cross-calls to do the MSR update. Which is not really valid at the early resume stage, and the warning is quite reasonable. Now, it all happens to _work_, for the simple reason that smp_call_function_single() ends up just doing the call directly on the CPU when the CPU number matches, but we really should just do the wrmsr() directly instead. This duplicates the wrmsr() logic, but hopefully we can just remove the wrmsr_on_cpu() version eventually. Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Eric's rcu barrier patch fixes a long standing problem with our unmount code hanging on to devices in workqueue helpers. Liu Bo nailed down a difficult assertion for in-memory extent mappings." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix warning of free_extent_map Btrfs: fix warning when creating snapshots Btrfs: return as soon as possible when edquot happens Btrfs: return EIO if we have extent tree corruption btrfs: use rcu_barrier() to wait for bdev puts at unmount Btrfs: remove btrfs_try_spin_lock Btrfs: get better concurrency for snapshot-aware defrag work
2013-03-15Btrfs: fix warning of free_extent_mapLiu Bo
Users report that an extent map's list is still linked when it's actually going to be freed from cache. The story is that a) when we're going to drop an extent map and may split this large one into smaller ems, and if this large one is flagged as EXTENT_FLAG_LOGGING which means that it's on the list to be logged, then the smaller ems split from it will also be flagged as EXTENT_FLAG_LOGGING, and this is _not_ expected. b) we'll keep ems from unlinking the list and freeing when they are flagged with EXTENT_FLAG_LOGGING, because the log code holds one reference. The end result is the warning, but the truth is that we set the flag EXTENT_FLAG_LOGGING only during fsync. So clear flag EXTENT_FLAG_LOGGING for extent maps split from a large one. Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Reported-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-03-15Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fix from Michal Marek: "One fix for for make headers_install/headers_check to not require make 3.81. The requirement has been accidentally introduced in 3.7." * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: fix make headers_check with make 3.80
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-05 18:30:54 +0000