summaryrefslogtreecommitdiff
path: root/Documentation/power
AgeCommit message (Collapse)Author
2012-07-31Merge tag 'for-v3.6' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery updates from Anton Vorontsov: "The tag contains just a few battery-related changes for v3.6. It's is all pretty straightforward, except one thing. One of our patches added thermal support for power supply class, but thermal/ subsystem changed under our feet. We (well, Stephen, that is) caught the issue and it was decided[1] that I'd just delay the battery pull request, and then will fix it up by merging upstream back into battery tree at the specific commit. That's not all though: another[2] small fixup for thermal subsystem was needed to get rid of a warning in power supply subsystem (the warning was not drivers/power's "fault", the thermal registration function just needed a proper const annotation, which is also done by a small commit on top of the merge. So, to sum this up: - The 'master' branch of the battery tree was in the -next tree for weeks, was never rebased, altered etc. It should be all OK; - Although, for-v3.6 tag contains the 'master' branch + merge + the warning fix. [1] http://lkml.org/lkml/2012/6/19/23 [2] http://lkml.org/lkml/2012/6/18/28" * tag 'for-v3.6' of git://git.infradead.org/battery-2.6: (23 commits) thermal: Constify 'type' argument for the registration routine olpc-battery: update CHARGE_FULL_DESIGN property for BYD LiFe batteries olpc-battery: Add VOLTAGE_MAX_DESIGN property charger-manager: Fix build break related to EXTCON lp8727_charger: Move header file into platform_data directory power_supply: Add min/max alert properties for CAPACITY, TEMP, TEMP_AMBIENT bq27x00_battery: Add support for BQ27425 chip charger-manager: Set current limit of regulator for over current protection charger-manager: Use EXTCON Subsystem to detect charger cables for charging test_power: Add VOLTAGE_NOW and BATTERY_TEMP properties test_power: Add support for USB AC source gpio-charger: Use cansleep version of gpio_set_value bq27x00_battery: Add support for power average and health properties sbs-battery: Don't trigger false supply_changed event twl4030_charger: Allow charger to control the regulator that feeds it twl4030_charger: Add backup-battery charging twl4030_charger: Fix some typos max17042_battery: Support CHARGE_COUNTER power supply attribute smb347-charger: Add constant charge and current properties power_supply: Add constant charge_current and charge_voltage properties ...
2012-07-19Merge branch 'pm-doc'Rafael J. Wysocki
* pm-doc: PM / Documentation: fix typos in power management description
2012-07-13power_supply: Add min/max alert properties for CAPACITY, TEMP, TEMP_AMBIENTRamakrishna Pallala
Minimum and maximum alerts on power supply properties will help or allow the user space to "proactively" create policies like connect/disconnect charger or stop/start the user apps based on capacity or temperature parameters. These parameters can be used to avoid unnecessary polling from user space and even from kernel space if the underlying HW can support INT triggers (ex: max17042/47). This patch adds the following power supply alert type properties: CAPACITY_ALERT_MIN CAPACITY_ALERT_MAX TEMP_ALERT_MIN TEMP_ALERT_MAX TEMP_AMBIENT_ALERT_MIN TEMP_AMBIENT_ALERT_MAX Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-07-03PM / Documentation: fix typos in power management descriptionOskar Schirmer
Just two missing characters. Signed-off-by: Oskar Schirmer <oskar@scara.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-01PM / Hibernate: Enable suspend to both for in-kernel hibernation.Bojan Smojver
It is often useful to suspend to memory after hibernation image has been written to disk. If the battery runs out or power is otherwise lost, the computer will resume from the hibernated image. If not, it will resume from memory and hibernation image will be discarded. Signed-off-by: Bojan Smojver <bojan@rexursive.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-19power_supply: Add constant charge_current and charge_voltage propertiesRamakrishna Pallala
Constant Charge Current(CC) is charging parameter which limit the maximum current which can be pumped into the battery during charge cycle. Constant Charge Voltage(CV) is also charging parameter which limit the maximum voltage that battery can reach during charge cycle. It is very common practice that at low or high temperatures we do not charge the batteries upto it's fullest charge voltage to avoid battery and user safety issues. These sysfs properties will be useful for debug and to implement certain user space policies like "Charging limited due to OverTemp". Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-05-31Merge tag 'for-v3.5' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery updates from Anton Vorontsov: "A bunch of fixes for v3.5, nothing extraordinary." * tag 'for-v3.5' of git://git.infradead.org/battery-2.6: (27 commits) smb347-charger: Include missing <linux/err.h> smb347-charger: Clean up battery attributes max17042_battery: Add support for max17047/50 chip sbs-battery.c: Capacity attr = remaining relative capacity isp1704_charger: Use after free on probe error ds2781_battery: Use DS2781_PARAM_EEPROM_SIZE and DS2781_USER_EEPROM_SIZE power_supply: Fix a typo in BATTERY_DS2781 Kconfig entry charger-manager: Provide cm_notify_event function for in-kernel use charger-manager: Poll battery health in normal state smb347-charger: Convert to regmap API smb347-charger: Move IRQ enabling to the end of probe smb347-charger: Rename few functions to match better what they are doing smb347-charger: Convert to use module_i2c_driver() smb347_charger: Cleanup power supply registration code in probe ab8500: Clean up probe routines ab8500_fg: Harden platform data check ab8500_btemp: Harden platform data check ab8500_charger: Harden platform data check MAINTAINERS: Fix 'F' entry for the power supply class max17042_battery: Handle irq request failure case ...
2012-05-23Merge tag 'pm-for-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: - Implementation of opportunistic suspend (autosleep) and user space interface for manipulating wakeup sources. - Hibernate updates from Bojan Smojver and Minho Ban. - Updates of the runtime PM core and generic PM domains framework related to PM QoS. - Assorted fixes. * tag 'pm-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits) epoll: Fix user space breakage related to EPOLLWAKEUP PM / Domains: Make it possible to add devices to inactive domains PM / Hibernate: Use get_gendisk to verify partition if resume_file is integer format PM / Domains: Fix computation of maximum domain off time PM / Domains: Fix link checking when add subdomain PM / Sleep: User space wakeup sources garbage collector Kconfig option PM / Sleep: Make the limit of user space wakeup sources configurable PM / Documentation: suspend-and-cpuhotplug.txt: Fix typo PM / Domains: Cache device stop and domain power off governor results, v3 PM / Domains: Make device removal more straightforward PM / Sleep: Fix a mistake in a conditional in autosleep_store() epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready PM / QoS: Create device constraints objects on notifier registration PM / Runtime: Remove device fields related to suspend time, v2 PM / Domains: Rework default domain power off governor function, v2 PM / Domains: Rework default device stop governor function, v2 PM / Sleep: Add user space interface for manipulating wakeup sources, v3 PM / Sleep: Add "prevent autosleep time" statistics to wakeup sources PM / Sleep: Implement opportunistic sleep, v2 PM / Sleep: Add wakeup_source_activate and wakeup_source_deactivate tracepoints ...
2012-05-12Merge remote-tracking branches 'regulator/topic/core', ↵Mark Brown
'regulator/topic/regmap' and 'regulator/topic/register' into regulator-next
2012-05-05charger-manager: Provide cm_notify_event function for in-kernel useChanwoo Choi
By using cm_notify_event function, charger driver can report several charger events (e.g. battery full and external power in/out, etc) to Charger-Manager. Charger-Manager can properly and immediately control chargers by the reported event. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05charger-manager: Poll battery health in normal stateChanwoo Choi
Charger-Manager needs to check battery health in normal state as well as suspend-to-RAM state. When the battery is fully charged, Charger-Manager needs to determine when the chargers restart charging. This patch allows Charger-Manager to monitor battery health in normal state and handle operation for chargers after battery is fully charged. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05PM / Documentation: suspend-and-cpuhotplug.txt: Fix typoMarcos Paulo de Souza
sysfs was expected in this context. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-04power_supply: Add voltage_ocv property and use it for max17042 driverRamakrishna Pallala
This adds a new sysfs file called 'voltage_ocv' which gives the Open Circuit Voltage of the battery. This property can be used for platform shutdown policies and can be useful for initial capacity estimations. Note: This patch is generated against linux-next branch. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-04-29PM / Freezer / Docs: Update documentation about freezing of tasksMarcos Paulo de Souza
The file Documentation/power/freezing-of-tasks.txt was still referencing the TIF_FREEZE flag, that was removed by the commit d88e4cb67197d007fb778d62fe17360e970d5bfa(freezer: remove now unused TIF_FREEZE). This patch removes all the references of TIF_FREEZE that were left behind. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-04-13regulator: Update regulator_register() API signature in DocumentationAxel Lin
commit c172708 "regulator: core: Use a struct to pass in regulator runtime configuration" changed the regulator_register() API signature. Update the Documentation accordingly to reflect the change in the function signature. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-09PM / Freezer / Docs: Document the beauty of freeze/thaw semanticsSrivatsa S. Bhat
The way the different freeze/thaw functions encapsulate each other are quite lovely from a design point of view. And as a side-effect, the way in which they are invoked (cleaning up on failure for example) differs significantly from how usual functions are dealt with. This is because of the underlying semantics that govern the freezing and thawing of various tasks. This subtle aspect that differentiates these functions from the rest, is worth documenting. Many thanks to Tejun Heo for providing enlightenment on this topic. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-01-29PM / Sleep: Introduce "late suspend" and "early resume" of devicesRafael J. Wysocki
The current device suspend/resume phases during system-wide power transitions appear to be insufficient for some platforms that want to use the same callback routines for saving device states and related operations during runtime suspend/resume as well as during system suspend/resume. In principle, they could point their .suspend_noirq() and .resume_noirq() to the same callback routines as their .runtime_suspend() and .runtime_resume(), respectively, but at least some of them require device interrupts to be enabled while the code in those routines is running. It also makes sense to have device suspend-resume callbacks that will be executed with runtime PM disabled and with device interrupts enabled in case someone needs to run some special code in that context during system-wide power transitions. Apart from this, .suspend_noirq() and .resume_noirq() were introduced as a workaround for drivers using shared interrupts and failing to prevent their interrupt handlers from accessing suspended hardware. It appears to be better not to use them for other porposes, or we may have to deal with some serious confusion (which seems to be happening already). For the above reasons, introduce new device suspend/resume phases, "late suspend" and "early resume" (and analogously for hibernation) whose callback will be executed with runtime PM disabled and with device interrupts enabled and whose callback pointers generally may point to runtime suspend/resume routines. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2012-01-19PM / Documentation: Fix minor issue in freezing_of_tasks.txtViresh Kumar
In a paragraph, "kernel thread" is mistakenly written as "kernel". Fix this by adding thread after word "kernel". Changes are shown in multiple lines, as they are realigned to 80 col width. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-01-19PM / Documentation: Fix spelling mistake in basic-pm-debugging.txtViresh Kumar
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-01-11Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: (68 commits) power_supply: Mark da9052 driver as broken power_supply: Drop usage of nowarn variant of sysfs_create_link() s3c_adc_battery: Average over more than one adc sample power_supply: Add DA9052 battery driver isp1704_charger: Fix missing check jz4740-battery: Fix signedness bug power_supply: Assume mains power by default sbs-battery: Fix devicetree match table ARM: rx51: Add bq27200 i2c board info sbs-battery: Change power supply name devicetree-bindings: Propagate bq20z75->sbs rename to dt bindings devicetree-bindings: Add vendor entry for Smart Battery Systems sbs-battery: Rename internals to new name bq20z75: Rename to sbs-battery wm97xx_battery: Use DEFINE_MUTEX() for work_lock max8997_charger: Remove duplicate module.h lp8727_charger: Some minor fixes for the header lp8727_charger: Add header file power_supply: Convert drivers/power/* to use module_platform_driver() power_supply: Add "unknown" in power supply type ...
2012-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits) regulator: set constraints.apply_uV to 0 in of_get_fixed_voltage_config regulator: max8925: fix enabled/disabled judgement mistake regulator: add regulator_bulk_force_disable function regulator: pass regulator_register of_node in fixed voltage driver regulator: add regulator_force_disable() definition for !CONFIG_REGULATOR regulator: Enable supply regulator if child rail is enabled. regulator: mc13892: Convert to devm_kzalloc() regulator: mc13783: Convert to devm_kzalloc() regulator: Fix checking return value of create_regulator regulator: Fix the error handling if create_regulator fails regulator: Export regulator_is_supported_voltage() regulator: mc13892: add device tree probe support regulator: mc13892: remove the unnecessary prefix from regulator name regulator: Convert wm831x regulator drivers to devm_kzalloc() regulator: da9052: Staticize non-exported symbols regulator: Replace kzalloc with devm_kzalloc and if-else with a switch-case for da9052-regulator regulator: Update da9052-regulator for DT changes regulator: DA9052/53 Regulator support regulator: pass device_node to of_get_regulator_init_data() regulator: If a single voltage is set with device tree then set apply_uV ...
2012-01-04Merge branch 'power-supply-scope' of ↵Anton Vorontsov
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
2012-01-04power_supply: Charger-Manager: Add properties for power-supply-classDonggeun Kim
Charger Manager provides power-supply-class aggregating information from multiple chargers and a fuel-gauge. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-01-04power_supply: Add initial Charger-Manager driverDonggeun Kim
Because battery health monitoring should be done even when suspended, it needs to wake up and suspend periodically. Thus, userspace battery monitoring may incur too much overhead; every device and task is woken up periodically. Charger Manager uses suspend-again to provide in-suspend monitoring. This patch allows to monitor battery health in-suspend state. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-12-21PM: Run the driver callback directly if the subsystem one is not thereRafael J. Wysocki
Make the PM core execute driver PM callbacks directly if the corresponding subsystem callbacks are not present. There are three reasons for doing that. First, it reflects the behavior of drivers/base/dd.c:really_probe() that runs the driver's .probe() callback directly if the bus type's one is not defined, so this change will remove one arbitrary difference between the PM core and the remaining parts of the driver core. Second, it will allow some subsystems, whose PM callbacks don't do anything except for executing driver callbacks, to be simplified quite a bit by removing those "forward-only" callbacks. Finally, it will allow us to remove one level of indirection in the system suspend and resume code paths where it is not necessary, which is going to lead to less debug noise with initcall_debug passed in the kernel command line (messages won't be printed for driverless devices whose subsystems don't provide PM callbacks among other things). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-21Merge branch 'master' into pm-sleepRafael J. Wysocki
* master: (848 commits) SELinux: Fix RCU deref check warning in sel_netport_insert() binary_sysctl(): fix memory leak mm/vmalloc.c: remove static declaration of va from __get_vm_area_node ipmi_watchdog: restore settings when BMC reset oom: fix integer overflow of points in oom_badness memcg: keep root group unchanged if creation fails nilfs2: potential integer overflow in nilfs_ioctl_clean_segments() nilfs2: unbreak compat ioctl cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask evm: prevent racing during tfm allocation evm: key must be set once during initialization mmc: vub300: fix type of firmware_rom_wait_states module parameter Revert "mmc: enable runtime PM by default" mmc: sdhci: remove "state" argument from sdhci_suspend_host x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT IB/qib: Correct sense on freectxts increment and decrement RDMA/cma: Verify private data length cgroups: fix a css_set not found bug in cgroup_attach_proc oprofile: Fix uninitialized memory access when writing to writing to oprofilefs Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel" ... Conflicts: kernel/cgroup_freezer.c
2011-12-08PM / Sleep: Recommend [un]lock_system_sleep() over using pm_mutex directlySrivatsa S. Bhat
Update the documentation to explain the perils of directly using mutex_[un]lock(&pm_mutex) and recommend the usage of the safe APIs [un]lock_system_sleep() instead. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-05regulator: Fix regulator_register() API signature in DocumentationRajendra Nayak
The commit 2c043bcbf287 ("regulator: pass additional of_node to regulator_register()") added an additional parameter to the regulator_register() API. Update the Documentation accordingly to reflect the change in the function signature. Reported-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28PM / Sleep: Update documentation related to system wakeupRafael J. Wysocki
The system wakeup section of Documentation/power/devices.txt is outdated, so make it agree with the current code. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-28PM / Runtime: Make documentation follow the new behavior of irq_safeRafael J. Wysocki
The runtime PM core code behavior related to the power.irq_safe device flag has changed recently and the documentation should be modified to reflect it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-28PM / Sleep: Correct inaccurate information in devices.txtRafael J. Wysocki
The documentation file Documentation/power/devices.txt contains some information that isn't correct any more due to code modifications made after that file had been created (or updated last time). Fix this. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-28PM / Domains: Document how PM domains are used by the PM coreRafael J. Wysocki
The current power management documentation in Documentation/power/ either doesn't cover PM domains at all, or gives inaccurate information about them, so update the relevant files in there to follow the code. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-21freezer: unexport refrigerator() and update try_to_freeze() slightlyTejun Heo
There is no reason to export two functions for entering the refrigerator. Calling refrigerator() instead of try_to_freeze() doesn't save anything noticeable or removes any race condition. * Rename refrigerator() to __refrigerator() and make it return bool indicating whether it scheduled out for freezing. * Update try_to_freeze() to return bool and relay the return value of __refrigerator() if freezing(). * Convert all refrigerator() users to try_to_freeze(). * Update documentation accordingly. * While at it, add might_sleep() to try_to_freeze(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Chris Mason <chris.mason@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Christoph Hellwig <hch@infradead.org>
2011-11-21freezer: don't unnecessarily set PF_NOFREEZE explicitlyTejun Heo
Some drivers set PF_NOFREEZE in their kthread functions which is completely unnecessary and racy - some part of freezer code doesn't consider cases where PF_NOFREEZE is set asynchronous to freezer operations. In general, there's no reason to allow setting PF_NOFREEZE explicitly. Remove them and change the documentation to note that setting PF_NOFREEZE directly isn't allowed. -v2: Dropped change to twl4030-irq.c as it no longer uses PF_NOFREEZE. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: "Gustavo F. Padovan" <padovan@profusion.mobi> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: wwang <wei_wang@realsil.com.cn>
2011-11-04PM / Runtime: Automatically retry failed autosuspendsAlan Stern
Originally, the runtime PM core would send an idle notification whenever a suspend attempt failed. The idle callback routine could then schedule a delayed suspend for some time later. However this behavior was changed by commit f71648d73c1650b8b4aceb3856bebbde6daa3b86 (PM / Runtime: Remove idle notification after failing suspend). No notifications were sent, and there was no clear mechanism to retry failed suspends. This caused problems for the usbhid driver, because it fails autosuspend attempts as long as a key is being held down. Therefore this patch (as1492) adds a mechanism for retrying failed autosuspends. If the callback routine updates the last_busy field so that the next autosuspend expiration time is in the future, the autosuspend will automatically be rescheduled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Henrik Rydberg <rydberg@euromail.se> Cc: <stable@kernel.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-04PM / Sleep: Update freezer documentationSrivatsa S. Bhat
This patch: * Substitutes some obsolete references to kernel/power/process.c by kernel/freezer.c. * Mentions kernel/freezer.c as being part of the "freezer" code along with the rest of the files. * Fixes a trivial typo. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-01Merge branch 'for-linus' of git://opensource.wolfsonmicro.com/regulatorLinus Torvalds
* 'for-linus' of git://opensource.wolfsonmicro.com/regulator: (22 commits) regulator: Constify constraints name regulator: Fix possible nullpointer dereference in regulator_enable() regulator: gpio-regulator add dependency on GENERIC_GPIO regulator: Add module.h include to gpio-regulator regulator: Add driver for gpio-controlled regulators regulator: remove duplicate REG_CTRL2 defines in tps65023 regulator: Clarify documentation for regulator-regulator supplies regulator: Fix some bitrot in the machine driver documentation regulator: tps65023: Added support for the similiar TPS65020 chip regulator: tps65023: Setting correct core regulator for tps65021 regulator: tps65023: Set missing bit for update core-voltage regulator: tps65023: Fixes i2c configuration issues regulator: Add debugfs file showing the supply map table regulator: tps6586x: add SMx slew rate setting regulator: tps65023: Fixes i2c configuration issues regulator: tps6507x: Remove num_voltages array regulator: max8952: removed unused mutex. regulator: fix regulator/consumer.h kernel-doc warning regulator: Ensure enough enable time for max8649 regulator: 88pm8607: Fix off-by-one value range checking in the case of no id is matched ...
2011-10-25Merge branch 'pm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits) PM / Clocks: Remove redundant NULL checks before kfree() PM / Documentation: Update docs about suspend and CPU hotplug ACPI / PM: Add Sony VGN-FW21E to nonvs blacklist. ARM: mach-shmobile: sh7372 A4R support (v4) ARM: mach-shmobile: sh7372 A3SP support (v4) PM / Sleep: Mark devices involved in wakeup signaling during suspend PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image PM / Hibernate: Do not initialize static and extern variables to 0 PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too PM / Hibernate: Add resumedelay kernel param in addition to resumewait MAINTAINERS: Update linux-pm list address PM / ACPI: Blacklist Vaio VGN-FW520F machine known to require acpi_sleep=nonvs PM / ACPI: Blacklist Sony Vaio known to require acpi_sleep=nonvs PM / Hibernate: Add resumewait param to support MMC-like devices as resume file PM / Hibernate: Fix typo in a kerneldoc comment PM / Hibernate: Freeze kernel threads after preallocating memory PM: Update the policy on default wakeup settings PM / VT: Cleanup #if defined uglyness and fix compile error PM / Suspend: Off by one in pm_suspend() PM / Hibernate: Include storage keys in hibernation image on s390 ...
2011-10-22PM / Documentation: Update docs about suspend and CPU hotplugSrivatsa S. Bhat
Update the documentation about the interaction between the suspend (S3) call path and the CPU hotplug infrastructure. This patch focusses only on the activities of the freezer, cpu hotplug and the notifications involved. It outlines how regular CPU hotplug differs from the way it is invoked during suspend and also tries to explain the locking involved. In addition to that, it discusses the issue of microcode update during CPU hotplug operations. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16PM / Hibernate: Freeze kernel threads after preallocating memoryRafael J. Wysocki
There is a problem with the current ordering of hibernate code which leads to deadlocks in some filesystems' memory shrinkers. Namely, some filesystems use freezable kernel threads that are inactive when the hibernate memory preallocation is carried out. Those same filesystems use memory shrinkers that may be triggered by the hibernate memory preallocation. If those memory shrinkers wait for the frozen kernel threads, the hibernate process deadlocks (this happens with XFS, for one example). Apparently, it is not technically viable to redesign the filesystems in question to avoid the situation described above, so the only possible solution of this issue is to defer the freezing of kernel threads until the hibernate memory preallocation is done, which is implemented by this change. Unfortunately, this requires the memory preallocation to be done before the "prepare" stage of device freeze, so after this change the only way drivers can allocate additional memory for their freeze routines in a clean way is to use PM notifiers. Reported-by: Christoph <cr2005@u-club.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16PM: Update the policy on default wakeup settingsAlan Stern
This patch (as1485) documents a change to the kernel's default wakeup policy. Devices that forward wakeup requests between buses should be enabled for wakeup by default. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16PM / Suspend: Add statistics debugfs file for suspend to RAMShuoX Liu
Record S3 failure time about each reason and the latest two failed devices' names in S3 progress. We can check it through 'suspend_stats' entry in debugfs. The motivation of the patch: We are enabling power features on Medfield. Comparing with PC/notebook, a mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far more frequently. If it can't enter suspend-2-ram in time, the power might be used up soon. We often find sometimes, a device suspend fails. Then, system retries s3 over and over again. As display is off, testers and developers don't know what happens. Some testers and developers complain they don't know if system tries suspend-2-ram, and what device fails to suspend. They need such info for a quick check. The patch adds suspend_stats under debugfs for users to check suspend to RAM statistics quickly. If not using this patch, we have other methods to get info about what device fails. One is to turn on CONFIG_PM_DEBUG, but users would get too much info and testers need recompile the system. In addition, dynamic debug is another good tool to dump debug info. But it still doesn't match our utilization scenario closely. 1) user need write a user space parser to process the syslog output; 2) Our testing scenario is we leave the mobile for at least hours. Then, check its status. No serial console available during the testing. One is because console would be suspended, and the other is serial console connecting with spi or HSU devices would consume power. These devices are powered off at suspend-2-ram. Signed-off-by: ShuoX Liu <shuox.liu@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16Merge branch 'pm-runtime' into pm-for-linusRafael J. Wysocki
* pm-runtime: PM / Runtime: Handle .runtime_suspend() failure correctly PM / Runtime: Fix kerneldoc comment for rpm_suspend() PM / Runtime: Update document about callbacks
2011-10-10PM / Runtime: Update document about callbacksMing Lei
Support for device power domains has been introduced in commit 9659cc0678b954f187290c6e8b247a673c5d37e1 (PM: Make system-wide PM and runtime PM treat subsystems consistently), also power domain callbacks will take precedence over subsystem ones from commit 4d27e9dcff00a6425d779b065ec8892e4f391661(PM: Make power domain callbacks take precedence over subsystem ones). So update part of "Device Runtime PM Callbacks" in Documentation/power/runtime_pm.txt. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-07Merge branch 'pm-qos' into pm-for-linusRafael J. Wysocki
* pm-qos: PM / QoS: Update Documentation for the pm_qos and dev_pm_qos frameworks PM / QoS: Add function dev_pm_qos_read_value() (v3) PM QoS: Add global notification mechanism for device constraints PM QoS: Implement per-device PM QoS constraints PM QoS: Generalize and export constraints management code PM QoS: Reorganize data structs PM QoS: Code reorganization PM QoS: Minor clean-ups PM QoS: Move and rename the implementation files
2011-10-07Merge branch 'pm-runtime' into pm-for-linusRafael J. Wysocki
* pm-runtime: PM / Tracing: build rpm-traces.c only if CONFIG_PM_RUNTIME is set PM / Runtime: Replace dev_dbg() with trace_rpm_*() PM / Runtime: Introduce trace points for tracing rpm_* functions PM / Runtime: Don't run callbacks under lock for power.irq_safe set USB: Add wakeup info to debugging messages PM / Runtime: pm_runtime_idle() can be called in atomic context PM / Runtime: Add macro to test for runtime PM events PM / Runtime: Add might_sleep() to runtime PM functions
2011-10-07regulator: Clarify documentation for regulator-regulator suppliesMark Brown
The mechanism used for connecting regulators together when one regulator supplies another wasn't clear as the names being used weren't really tied together well. Reported-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-07regulator: Fix some bitrot in the machine driver documentationMark Brown
The documentation for the machine driver was rather badly bitrotted, using pointers to struct device rather than dev_name() to hook up the consumers. Update to use dev_name(). Reported-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04PM / QoS: Update Documentation for the pm_qos and dev_pm_qos frameworksJean Pihet
Update the documentation for the recently updated pm_qos API, kernel and user space. Add documentation for the per-device PM QoS (dev_pm_qos) framework API. Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-09-27doc: fix broken referencesPaul Bolle
There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>