summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)Author
2010-07-07isdn/gigaset: remove EXPERIMENTAL tag from GIGASET_CAPITilman Schmidt
The CAPI variant of the Gigaset drivers can, in combination with capidrv, now fully replace the legacy ISDN4Linux variant. All reported problems have been fixed. So remove the EXPERIMENTAL tag from the Kconfig option selecting it, and adapt the documentation accordingly to encourage users to switch to it. Impact: documentation/status update, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: document dial-out number formatTilman Schmidt
Add a paragraph to the driver documentation describing how to make internal and external calls. Impact: documentation Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-05Documentation/isdn: CAPI controller interface amendmentTilman Schmidt
Mention that the CAPI controller methods load_firmware() and reset_ctr() are asynchronous, and should signal completion. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-02Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2010-06-29caif-driver: Add CAIF-SPI Protocol driver.Sjur Braendeland
This patch introduces the CAIF SPI Protocol Driver for CAIF Link Layer. This driver implements a platform driver to accommodate for a platform specific SPI device. A general platform driver is not possible as there are no SPI Slave side Kernel API defined. A sample CAIF SPI Platform device can be found in .../Documentation/networking/caif/spi_porting.txt Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25netfilter: complete the deprecation of CONFIG_NF_CT_ACCTTim Gardner
CONFIG_NF_CT_ACCT has been deprecated for awhile and was originally scheduled for removal by 2.6.29. Removing support for this config option also stops this deprecation warning message in the kernel log. [ 61.669627] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 61.669850] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 61.669852] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 61.669853] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> [Patrick: changed default value to 0] Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-06-17Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-06-16ipw2200: Enable LED by defaultubuntu@tjworld.net
BugLink: http://bugs.launchpad.net/bugs/21367 Enable LED by default and update the MODULE_PARM_DESC. The original reason for defaulting to disabled was documented in 2005 and noted, "The LED code has been reported to hang some systems when running ifconfig and is therefore disabled by default." This no longer appears applicable and users have been requesting this be enabled for several years. Signed-off-by: TJ <ubuntu@tjworld.net> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-11pktgen: increasing transmission granularityDaniel Turull
This patch increases the granularity of the rate generated by pktgen. The previous version of pktgen uses micro seconds (udelay) resolution when it was delayed causing gaps in the rates. It is changed to nanosecond (ndelay). Now any rate is possible. Also it allows to set, the desired rate in Mb/s or packets per second. The documentation has been updated. Signed-off-by: Daniel Turull <daniel.turull@gmail.com> Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-05bonding: allow user-controlled output slave selectionAndy Gospodarek
v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03ipconfig: document DHCP hostname and DNS recordWu Fengguang
Now it's possible to update the DNS record for $HOST_NAME with ip=::::$HOST_NAME::dhcp CC: Andi Kleen <ak@linux.intel.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02packet_mmap: expose hw packet timestamps to network packet capture utilitiesScott McMillan
This patch adds a setting, PACKET_TIMESTAMP, to specify the packet timestamp source that is exported to capture utilities like tcpdump by packet_mmap. PACKET_TIMESTAMP accepts the same integer bit field as SO_TIMESTAMPING. However, only the SOF_TIMESTAMPING_SYS_HARDWARE and SOF_TIMESTAMPING_RAW_HARDWARE values are currently recognized by PACKET_TIMESTAMP. SOF_TIMESTAMPING_SYS_HARDWARE takes precedence over SOF_TIMESTAMPING_RAW_HARDWARE if both bits are set. If PACKET_TIMESTAMP is not set, a software timestamp generated inside the networking stack is used (the behavior before this setting was added). Signed-off-by: Scott McMillan <scott.a.mcmillan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-31arp_notify: document that a gratuitous ARP request is sent when this option ↵Ian Campbell
is enabled This option causes a gratuitous ARP request, not a reply as the documentation currently suggests. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-28Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits) ACPI: Don't let acpi_pad needlessly mark TSC unstable drivers/acpi/sleep.h: Checkpatch cleanup ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion ACPI: delete unused c-state promotion/demotion data strucutures ACPI: video: fix acpi_backlight=video ACPI: EC: Use kmemdup drivers/acpi: use kasprintf ACPI, APEI, EINJ injection parameters support Add x64 support to debugfs ACPI, APEI, Use ERST for persistent storage of MCE ACPI, APEI, Error Record Serialization Table (ERST) support ACPI, APEI, Generic Hardware Error Source memory error support ACPI, APEI, UEFI Common Platform Error Record (CPER) header Unified UUID/GUID definition ACPI Hardware Error Device (PNP0C33) support ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setup ACPI, APEI, Document for APEI ACPI, APEI, EINJ support ACPI, APEI, HEST table parsing ACPI, APEI, APEI supporting infrastructure ...
2010-05-28Merge branch 'ht-delete-2.6.35' into releaseLen Brown
2010-05-28Merge branch 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux: ARM: S5PV210: serial: Fix section mismatch warning ARM: s3c2410_defconfig: Add new machines ARM: s3c6400_defconfig: Add framebuffer and basic LCD ARM: s3c6400_defconfig: Add RTC driver support ARM: s3c6400_defconfig: Enable USB host side ARM: s3c6400_defconfig: Add SPI driver ARM: s3c6400_defconfig: Update compiled machines ARM: S5P: Regoster clk_xusbxti clock for hsotg driver ARM: S3C64XX: Add USB OTG HCLK to the list of clocks ARM: SAMSUNG: gpio-cfg.h: update documentation ARM: SAMSUNG: Documentation: add documentation on GPIO code ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin() ARM: S3C24XX: Documentation: add section on gpiolib changes ARM: S3C24XX: Documentation: update GPIO documentation ARM: S3C24XX: Documentation: update documentation overview ARM: SAMSUNG: Documentation: update directory layout ARM: SAMSUNG: Documentation: update the list of SoCs supported
2010-05-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: remove detritus left by "mm: make read_cache_page synchronous" fix fs/sysv s_dirt handling fat: convert to use the new truncate convention. ext2: convert to use the new truncate convention. tmpfs: convert to use the new truncate convention fs: convert simple fs to new truncate kill spurious reference to vmtruncate fs: introduce new truncate sequence fs/super: fix kernel-doc warning fs/minix: bugfix, number of indirect block ptrs per block depends on block size rename the generic fsync implementations drop unused dentry argument to ->fsync fs: Add missing mutex_unlock Fix racy use of anon_inode_getfd() in perf_event.c get rid of the magic around f_count in aio VFS: fix recent breakage of FS_REVAL_DOT Revert "anon_inode: set S_IFREG on the anon_inode"
2010-05-28ARM: SAMSUNG: Documentation: add documentation on GPIO codeBen Dooks
Add some documentation in Documentation/arm/Samsung for the GPIO code and where to look for the necessary functions. Update the S3C24XX case as well. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: S3C24XX: Documentation: add section on gpiolib changesBen Dooks
Add section to the S3C24XX GPIO documentation on the recent changes to move towards gpiolib integration. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: S3C24XX: Documentation: update GPIO documentationBen Dooks
Upate the S3C24XX GPIO documentation after the changes for gpiolib and show which calls are being replaced by gpiolib or the new s3c generic calls. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: S3C24XX: Documentation: update documentation overviewBen Dooks
Add the two new SoCs added in this release cycle and update the notes on the gpiolib conversion. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: SAMSUNG: Documentation: update directory layoutBen Dooks
Update the directory layout in Documentation/arm/Samsung/Overview.txt to reflect the changes that have been made in the latest kernel updates. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: SAMSUNG: Documentation: update the list of SoCs supportedBen Dooks
Update the list of SoCs supported for the plat-s5p range. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-27fs: introduce new truncate sequencenpiggin@suse.de
Introduce a new truncate calling sequence into fs/mm subsystems. Rather than setattr > vmtruncate > truncate, have filesystems call their truncate sequence from ->setattr if filesystem specific operations are required. vmtruncate is deprecated, and truncate_pagecache and inode_newsize_ok helpers introduced previously should be used. simple_setattr is introduced for simple in-ram filesystems to implement the new truncate sequence. Eventually all filesystems should be converted to implement a setattr, and the default code in notify_change should go away. simple_setsize is also introduced to perform just the ATTR_SIZE portion of simple_setattr (ie. changing i_size and trimming pagecache). To implement the new truncate sequence: - filesystem specific manipulations (eg freeing blocks) must be done in the setattr method rather than ->truncate. - vmtruncate can not be used by core code to trim blocks past i_size in the event of write failure after allocation, so this must be performed in the fs code. - convert usage of helpers block_write_begin, nobh_write_begin, cont_write_begin, and *blockdev_direct_IO* to use _newtrunc postfixed variants. These avoid calling vmtruncate to trim blocks (see previous). - inode_setattr should not be used. generic_setattr is a new function to be used to copy simple attributes into the generic inode. - make use of the better opportunity to handle errors with the new sequence. Big problem with the previous calling sequence: the filesystem is not called until i_size has already changed. This means it is not allowed to fail the call, and also it does not know what the previous i_size was. Also, generic code calling vmtruncate to truncate allocated blocks in case of error had no good way to return a meaningful error (or, for example, atomically handle block deallocation). Cc: Christoph Hellwig <hch@lst.de> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27drop unused dentry argument to ->fsyncChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: implement dump_id force param libata: disable ATAPI AN by default libata-sff: make BMDMA optional libata-sff: kill dummy BMDMA ops from sata_qstor and pata_octeon_cf libata-sff: separate out BMDMA init libata-sff: separate out BMDMA irq handler libata-sff: ata_sff_irq_clear() is BMDMA specific sata_mv: drop unncessary EH callback resetting
2010-05-27Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits) hwmon: (lm75) Add support for the Texas Instruments TMP105 hwmon: (ltc4245) Read only one GPIO pin hwmon: (dme1737) Add SCH5127 support hwmon: (tmp102) Don't always stop chip at exit hwmon: (tmp102) Fix suspend and resume functions hwmon: (tmp102) Various fixes hwmon: Driver for TI TMP102 temperature sensor hwmon: EMC1403 thermal sensor support hwmon: (applesmc) Add temperature sensor labels to sysfs interface hwmon: (applesmc) Add generic support for MacBook Pro 7 hwmon: (applesmc) Add generic support for MacBook Pro 6 hwmon: (applesmc) Add support for MacBook Pro 5,3 and 5,4 hwmon: (tmp401) Reorganize code to get rid of static forward declarations hwmon: (tmp401) Use constants for sysfs file permissions hwmon: (adm1031) Allow setting update rate hwmon: Add description of the update_rate sysfs attribute hwmon: (lm90) Use programmed update rate hwmon: (f71882fg) Acquire I/O regions while we're working with them hwmon: (f71882fg) Code cleanup hwmon: (f71882fg) Use strict_stro(l|ul) instead of simple_strto$1 ...
2010-05-27hwmon: (ltc4245) Read only one GPIO pinIra W. Snyder
Read only one of the GPIO pins as an analog voltage. The ADC can be switched to a different GPIO pin at runtime, but this is not supported. Previously, this driver would report the analog voltage of the currently selected GPIO pin as all three GPIO voltages: in9_input, in10_input and in11_input. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2010-05-27hwmon: (dme1737) Add SCH5127 supportJuerg Haefliger
Add support for the hardware monitoring capabilities of the SCH5127 chip to the dme1737 driver. Signed-off-by: Juerg Haefliger <juergh@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Jeff Rickman <jrickman@myamigos.us>
2010-05-27hwmon: (tmp102) Various fixesJean Delvare
Fixes from my driver review: http://lists.lm-sensors.org/pipermail/lm-sensors/2010-March/028051.html Only the small changes are in there, more important changes will come later separately as time permits. * Drop the remnants of the now gone detect function * The TMP102 has no known compatible chip * Include the right header files * Clarify why byte swapping of register values is needed * Strip resolution info bit from temperature register value * Set cache lifetime to 1/3 second * Don't arbitrarily reject limit values; clamp as needed * Make limit writing unconditional * Don't check for transaction types the driver doesn't use * Properly check for error when setting configuration * Report error on failed probe * Make the driver load automatically where needed * Various other minor fixes Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Steven King <sfking@fdwdc.com>
2010-05-27hwmon: Driver for TI TMP102 temperature sensorSteven King
Driver for the TI TMP102. The TI TMP102 is similar to the LM75. It differs from the LM75 by having a 16-bit conf register and the temp registers have a minimum resolution of 12 bits; the extended conf register can select 13-bit resolution (which this driver does) and also change the update rate (which this driver currently doesn't use). [JD: Fix tmp102_exit tag, must be __exit, not __init.] Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-27hwmon: Add description of the update_rate sysfs attributeIra W. Snyder
The update_rate attribute can be used by drivers to let userspace choose the update rate of the chip, if it is configurable. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-27hwmon: (lm63) Add basic support for LM64Matthew Garrett
The LM64 appears to be an LM63 with added GPIO lines. Add support for the hwmon functionality - GPIO can be added at some later stage if someone has a need for them. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-27Merge branch 'sfi-release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6 * 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6: SFI: add sysfs interface for SFI tables. SFI: add support for v0.81 spec
2010-05-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: schedule for removal firewire: core: use separate timeout for each transaction firewire: core: Fix tlabel exhaustion problem firewire: core: make transaction label allocation more robust firewire: core: clean up config ROM related defined constants ieee1394: mark char device files as not seekable firewire: cdev: mark char device files as not seekable firewire: ohci: cleanups and fix for nonstandard build without debug facility firewire: ohci: wait for PHY register accesses to complete firewire: ohci: fix up configuration of TI chips firewire: ohci: enable 1394a enhancements firewire: ohci: do not clear PHY interrupt status inadvertently firewire: ohci: add a function for reading PHY registers Trivial conflicts in Documentation/feature-removal-schedule.txt
2010-05-27SFI: add sysfs interface for SFI tables.Feng Tang
Analogous to ACPI's /sys/firmware/acpi/tables/... create /sys/firmware/sfi/tables/ The tables are primariy for the kernel, but sometimes it is useful for user-space to be able to read them. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-27numa: update Documentation/vm/numa, add memoryless node infoLee Schermerhorn
Kamezawa Hiroyuki requested documentation for the numa_mem_id() and slab related changes. He suggested Documentation/vm/numa for this documentation. Looking at this file, it seems to me to be hopelessly out of date relative to current Linux NUMA support. At the risk of going down a rathole, I have made an attempt to rewrite the doc at a slightly higher level [I think] and provide pointers to other in-tree documents and out-of-tree man pages that cover the details. Let the games begin. Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Tejun Heo <tj@kernel.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Nick Piggin <npiggin@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Eric Whitney <eric.whitney@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27Documentation/filesystems/Locking: update documentation on llseek() wrt BKLJan Blunck
The inode's i_size is not protected by the big kernel lock. Therefore it does not make sense to recommend taking the BKL in filesystems llseek operations. Instead it should use the inode's mutex or use just use i_size_read() instead. Add a note that this is not protecting file->f_pos. Signed-off-by: Jan Blunck <jblunck@suse.de> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: John Kacur <jkacur@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27Documentation/DMA-API-HOWTO: add ARCH_KMALLOC_MINALIGN descriptionFUJITA Tomonori
Add ARCH_KMALLOC_MINALIGN description in "Platform Issues" section. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: "David S. Miller" <davem@davemloft.net> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27Documentation: move the error handling to the better place in DMA-API-HOWTOFUJITA Tomonori
Handing DMA mapping errors is essential. Let's put it in the more appropriate place rather than the end of the doc. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27Documentation: update scatterlist struct description in DMA-API-HOWTOFUJITA Tomonori
Now we have <asm-generic/scatterlist.h>. Architectures should use it instead of inventing the own scatterlist struct. Let's update the description. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27Documentation: add SCSI drivers' mapping error handling to DMA-API-HOWTOFUJITA Tomonori
Add the concrete DMA mapping error handling for SCSI drivers on the queuecommand path. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27Documentation: add networking driver's mapping error handling to DMA-API-HOWTOFUJITA Tomonori
Adds the concrete DMA mapping error handling for Networking drivers on the transmit path. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27memcg: update documentationKAMEZAWA Hiroyuki
Some information are old, and I think current document doesn't work as "a guide for users". We need summary of all of our controls, at least. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27memcg: move charge of file pagesDaisuke Nishimura
This patch adds support for moving charge of file pages, which include normal file, tmpfs file and swaps of tmpfs file. It's enabled by setting bit 1 of <target cgroup>/memory.move_charge_at_immigrate. Unlike the case of anonymous pages, file pages(and swaps) in the range mmapped by the task will be moved even if the task hasn't done page fault, i.e. they might not be the task's "RSS", but other task's "RSS" that maps the same file. And mapcount of the page is ignored(the page can be moved even if page_mapcount(page) > 1). So, conditions that the page/swap should be met to be moved is that it must be in the range mmapped by the target task and it must be charged to the old cgroup. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix warning] Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27memcg: oom kill disable and oom statusKAMEZAWA Hiroyuki
This adds a feature to disable oom-killer for memcg, if disabled, of course, tasks under memcg will stop. But now, we have oom-notifier for memcg. And the world around memcg is not under out-of-memory. memcg's out-of-memory just shows memcg hits limit. Then, administrator or management daemon can recover the situation by - kill some process - enlarge limit, add more swap. - migrate some tasks - remove file cache on tmps (difficult ?) Unlike oom-killer, you can take enough information before killing tasks. (by gcore, or, ps etc.) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27memcg: oom notifierKAMEZAWA Hiroyuki
Considering containers or other resource management softwares in userland, event notification of OOM in memcg should be implemented. Now, memcg has "threshold" notifier which uses eventfd, we can make use of it for oom notification. This patch adds oom notification eventfd callback for memcg. The usage is very similar to threshold notifier, but control file is memory.oom_control and no arguments other than eventfd is required. % cgroup_event_notifier /cgroup/A/memory.oom_control dummy (About cgroup_event_notifier, see Documentation/cgroup/) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: David Rientjes <rientjes@google.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27Documentation/cgroups/cgroups.txt: fix reference to "numtasks"Trevor Woerner
Signed-off-by: Trevor Woerner <twoerner@gmail.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27Documentation: SubmittingDrivers: ResourcesArce, Abraham
- Add additional location (Git) for the kernel master tree - Add reference to Git Project Signed-off-by: Abraham Arce <x0066660@ti.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus: squashfs: update documentation to include description of xattr layout squashfs: fix name reading in squashfs_xattr_get squashfs: constify xattr handlers squashfs: xattr fix sparse warnings squashfs: xattr_lookup sparse fix squashfs: add xattr support configure option squashfs: add new extended inode types squashfs: add support for xattr reading squashfs: add xattr id support