summaryrefslogtreecommitdiff
path: root/arch/arc/mm/tlbex.S
AgeCommit message (Collapse)Author
2015-11-14ARC: use ASL assembler mnemonicVineet Gupta
ARCompact and ARCv2 only have ASL, while binutils used to support LSL as a alias mnemonic. Newer binutils (upstream) don't want to do that so replace it. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-29ARC: mm: PAE40 supportVineet Gupta
This is the first working implementation of 40-bit physical address extension on ARCv2. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-28ARC: mm: PAE40: tlbex.S: Explicitify the size of pte_tVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-17ARCv2: mm: THP supportVineet Gupta
MMUv4 in HS38x cores supports Super Pages which are basis for Linux THP support. Normal and Super pages can co-exist (ofcourse not overlap) in TLB with a new bit "SZ" in TLB page desciptor to distinguish between them. Super Page size is configurable in hardware (4K to 16M), but fixed once RTL builds. The exact THP size a Linx configuration will support is a function of: - MMU page size (typical 8K, RTL fixed) - software page walker address split between PGD:PTE:PFN (typical 11:8:13, but can be changed with 1 line) So for above default, THP size supported is 8K * 256 = 2M Default Page Walker is 2 levels, PGD:PTE:PFN, which in THP regime reduces to 1 level (as PTE is folded into PGD and canonically referred to as PMD). Thus thp PMD accessors are implemented in terms of PTE (just like sparc) Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-09ARC: mm: pte flags comsetic cleanups, commentsVineet Gupta
No semantical changes Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-25ARCv2: [vdk] dts files and defconfig for HS38 VDKRuud Derwig
- CONFIG_ARC_UBOOT_SUPPORT to handle arguments passed in r0, r1, r2 - CONFIG_DEVTMPFS_MOUNT for mouting rootfs since it uses external cpio for rootfs Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Ruud Derwig <rderwig@synopsys.com> [vgupta: folded the Main baord DT files for smp/up into one] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-22ARCv2: MMUv4: TLB programming Model changesVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-22ARCv2: Support for ARCv2 ISA and HS38x coresVineet Gupta
The notable features are: - SMP configurations of upto 4 cores with coherency - Optional L2 Cache and IO-Coherency - Revised Interrupt Architecture (multiple priorites, reg banks, auto stack switch, auto regfile save/restore) - MMUv4 (PIPT dcache, Huge Pages) - Instructions for * 64bit load/store: LDD, STD * Hardware assisted divide/remainder: DIV, REM * Function prologue/epilogue: ENTER_S, LEAVE_S * IRQ enable/disable: CLRI, SETI * pop count: FFS, FLS * SETcc, BMSKN, XBFU... Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: entry.S: confine EXCEPTION_* macros to one fileVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-07-23ARC: update some commentsVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-03-26ARC: switch to generic ENTRY/END assembler annotationsVineet Gupta
With commit 9df62f054406 "arch: use ASM_NL instead of ';'" the generic macros can handle the arch specific newline quirk. Hence we can get rid of ARC asm macros and use the "C" style macros. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-11-06ARC: Change calling convention of do_page_fault()Vineet Gupta
switch the args (address, pt_regs) to match with all the other "C" exception handlers. This removes the awkwardness in EV_ProtV for page fault vs. unaligned access. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-08-30ARC: [ASID] Track ASID allocation cycles/generationsVineet Gupta
This helps remove asid-to-mm reverse map While mm->context.id contains the ASID assigned to a process, our ASID allocator also used asid_mm_map[] reverse map. In a new allocation cycle (mm->ASID >= @asid_cache), the Round Robin ASID allocator used this to check if new @asid_cache belonged to some mm2 (from prev cycle). If so, it could locate that mm using the ASID reverse map, and mark that mm as unallocated ASID, to force it to refresh at the time of switch_mm() However, for SMP, the reverse map has to be maintained per CPU, so becomes 2 dimensional, hence got rid of it. With reverse map gone, it is NOT possible to reach out to current assignee. So we track the ASID allocation generation/cycle and on every switch_mm(), check if the current generation of CPU ASID is same as mm's ASID; If not it is refreshed. (Based loosely on arch/sh implementation) Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-08-30ARC: [ASID] Refactor the TLB paranoid debug codeVineet Gupta
-Asm code already has values of SW and HW ASID values, so they can be passed to the printing routine. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-08-30ARC: MMUv4 preps/2 - Reshuffle PTE bitsVineet Gupta
With previous commit freeing up PTE bits, reassign them so as to: - Match the bit to H/w counterpart where possible (e.g. MMUv2 GLOBAL/PRESENT, this avoids a shift in create_tlb()) - Avoid holes in _PAGE_xxx definitions Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-08-29ARC: MMUv4 preps/1 - Fold PTE K/U access flagsVineet Gupta
The current ARC VM code has 13 flags in Page Table entry: some software (accesed/dirty/non-linear-maps) and rest hardware specific. With 8k MMU page, we need 19 bits for addressing page frame so remaining 13 bits is just about enough to accomodate the current flags. In MMUv4 there are 2 additional flags, SZ (normal or super page) and WT (cache access mode write-thru) - and additionally PFN is 20 bits (vs. 19 before for 8k). Thus these can't be held in current PTE w/o making each entry 64bit wide. It seems there is some scope of compressing the current PTE flags (and freeing up a few bits). Currently PTE contains fully orthogonal distinct access permissions for kernel and user mode (Kr, Kw, Kx; Ur, Uw, Ux) which can be folded into one set (R, W, X). The translation of 3 PTE bits into 6 TLB bits (when programming the MMU) can be done based on following pre-requites/assumptions: 1. For kernel-mode-only translations (vmalloc: 0x7000_0000 to 0x7FFF_FFFF), PTE additionally has PAGE_GLOBAL flag set (and user space entries can never be global). Thus such a PTE can translate to Kr, Kw, Kx (as appropriate) and zero for User mode counterparts. 2. For non global entries, the PTE flags can be used to create mirrored K and U TLB bits. This is true after commit a950549c675f2c8c504 "ARC: copy_(to|from)_user() to honor usermode-access permissions" which ensured that user-space translations _MUST_ have same access permissions for both U/K mode accesses so that copy_{to,from}_user() play fair with fault based CoW break and such... There is no such thing as free lunch - the cost is slightly infalted TLB-Miss Handlers. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-08-29ARC: Code cosmetics (Nothing semantical)Vineet Gupta
* reduce editor lines taken by pt_regs * ARCompact ISA specific part of TLB Miss handlers clubbed together * cleanup some comments Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-08-26ARC: Exception Handlers Code consolidationVineet Gupta
After the recent cleanups, all the exception handlers now have same boilerplate prologue code. Move that into common macro. This reduces readability but helps greatly with sharing / duplicating entry code with ARCv2 ISA where the handlers are pretty much the same, just the entry prologue is different (due to hardware assist). Also while at it, add the missing FAKE_RET_FROM_EXCPN calls in couple of places to drop down to pure kernel mode (from exception mode) before jumping off into "C" code. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-06-27ARC: [tlb-miss] Fix bug with CONFIG_ARC_DBG_TLB_MISS_COUNTVineet Gupta
LOAD_FAULT_PTE macro is expected to set r2 with faulting vaddr. However in case of CONFIG_ARC_DBG_TLB_MISS_COUNT, it was getting clobbered with statistics collection code. Fix latter by using a different register. Note that only I-TLB Miss handler was potentially affected. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-06-27ARC: [tlb-miss] Extraneous PTE bit testing/settingVineet Gupta
* No need to check for READ access in I-TLB Miss handler * Redundant PAGE_PRESENT update in PTE Post TLB entry installation, in updating PTE for software accessed/dity bits, no need to update PAGE_PRESENT since it will already be set. Infact the entry won't have installed if !PAGE_PRESENT. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-06-26ARC: Remove explicit passing around of ECRVineet Gupta
With ECR now part of pt_regs * No need to propagate from lowest asm handlers as arg * No need to save it in tsk->thread.cause_code * Avoid bit chopping to access the bit-fields More code consolidation, cleanup Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-06-22ARC: [mm] Remove @write argument to do_page_fault()Vineet Gupta
This can be ascertained within do_page_fault() since it gets the full ECR (Exception Cause Register). Further, for both the callers of do_page_fault(): Prot-V / D-TLB-Miss, the cause sub-fields in ECR are same for same type of access, making the code much more simpler. D-TLB-Miss [LD] 0x00_21_01_00 Prot-V [LD] 0x00_23_01_00 ^^ D-TLB-Miss [ST] 0x00_21_02_00 Prot-V [ST] 0x00_23_02_00 ^^ D-TLB-Miss [EX] 0x00_21_03_00 Prot-V [EX] 0x00_23_03_00 ^^ This helps code consolidation, which is even better when moving code from assembler to "C". Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-06-22ARC: Disintegrate arcregs.hVineet Gupta
* Move the various sub-system defines/types into relevant files/functions (reduces compilation time) * move CPU specific stuff out of asm/tlb.h into asm/mmu.h Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-23ARC: copy_(to|from)_user() to honor usermode-access permissionsVineet Gupta
This manifested as grep failing psuedo-randomly: -------------->8--------------------- [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ [ARCLinux]$ ip address show lo | grep inet inet 127.0.0.1/8 scope host lo -------------->8--------------------- ARC700 MMU provides fully orthogonal permission bits per page: Ur, Uw, Ux, Kr, Kw, Kx The user mode page permission templates used to have all Kernel mode access bits enabled. This caused a tricky race condition observed with uClibc buffered file read and UNIX pipes. 1. Read access to an anon mapped page in libc .bss: write-protected zero_page mapped: TLB Entry installed with Ur + K[rwx] 2. grep calls libc:getc() -> buffered read layer calls read(2) with the internal read buffer in same .bss page. The read() call is on STDIN which has been redirected to a pipe. read(2) => sys_read() => pipe_read() => copy_to_user() 3. Since page has Kernel-write permission (despite being user-mode write-protected), copy_to_user() suceeds w/o taking a MMU TLB-Miss Exception (page-fault for ARC). core-MM is unaware that kernel erroneously wrote to the reserved read-only zero-page (BUG #1) 4. Control returns to userspace which now does a write to same .bss page Since Linux MM is not aware that page has been modified by kernel, it simply reassigns a new writable zero-init page to mapping, loosing the prior write by kernel - effectively zero'ing out the libc read buffer under the hood - hence grep doesn't see right data (BUG #2) The fix is to make all kernel-mode access permissions mirror the user-mode ones. Note that the kernel still has full access to pages, when accessed directly (w/o MMU) - this fix ensures that kernel-mode access in copy_to_from() path uses the same faulting access model as for pure user accesses to keep MM fully aware of page state. The issue is peudo-random because it only shows up if the TLB entry installed in #1 is present at the time of #3. If it is evicted out, due to TLB pressure or some-such, then copy_to_user() does take a TLB Miss Exception, with a routine write-to-anon COW processing installing a fresh page for kernel writes and also usable as it is in userspace. Further the issue was dormant for so long as it depends on where the libc internal read buffer (in .bss) is mapped at runtime. If it happens to reside in file-backed data mapping of libc (in the page-aligned slack space trailing the file backed data), loader zero padding the slack space, does the early cow page replacement, setting things up at the very beginning itself. With gcc 4.8 based builds, the libc buffer got pushed out to a real anon mapping which triggers the issue. Reported-by: Anton Kolesov <akolesov@synopsys.com> Cc: <stable@vger.kernel.org> # 3.9 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-15ARC: Support for single cycle Close Coupled Mem (CCM)Vineet Gupta
* Includes mapping of CCMs in address space * Annotations to move arbitrary code/data into CCM * Moving some of the critical code/data into CCM * Runtime detection/reporting Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-15ARC: SMP supportVineet Gupta
ARC common code to enable a SMP system + ISS provided SMP extensions. ARC700 natively lacks SMP support, hence some of the core features are are only enabled if SoCs have the necessary h/w pixie-dust. This includes: -Inter Processor Interrupts (IPI) -Cache coherency -load-locked/store-conditional ... The low level exception handling would be completely broken in SMP because we don't have hardware assisted stack switching. Thus a fair bit of this code is repurposing the MMU_SCRATCH reg for event handler prologues to keep them re-entrant. Many thanks to Rajeshwar Ranga for his initial "major" contributions to SMP Port (back in 2008), and to Noam Camus and Gilad Ben-Yossef for help with resurrecting that in 3.2 kernel (2012). Note that this platform code is again singleton design pattern - so multiple SMP platforms won't build at the moment - this deficiency is addressed in subsequent patches within this series. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rajeshwar Ranga <rajeshwar.ranga@gmail.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com>
2013-02-15ARC: Diagnostics: show_regs() etcVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-15ARC: MMU Exception HandlingVineet Gupta
* MMU I-TLB / D-TLB Miss Exceptions - Fast Path TLB Refill Handler - slowpath TLB creation via do_page_fault() -> update_mmu_cache() * Duplicate PD Exception Handler Signed-off-by: Vineet Gupta <vgupta@synopsys.com>