summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/clockdomain44xx.c
AgeCommit message (Collapse)Author
2012-10-21ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions ↵Paul Walmsley
into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-09-23ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problemsPaul Walmsley
The idle status of the IP blocks and clocks inside the EMU clockdomain isn't taken into account by the PRCM hardware when deciding whether the clockdomain is idle. Add a workaround flag in the clockdomain code, CLKDM_MISSING_IDLE_REPORTING, to deal with this problem, and add the code necessary to support it. If CLKDM_MISSING_IDLE_REPORTING is set on a clockdomain, the clockdomain will be forced active whenever an IP block inside that clockdomain is in use, even if the clockdomain supports hardware-supervised idle. When the kernel indicates that the last active IP block inside the clockdomain is no longer used, the clockdomain will be forced idle, or, if that mode is not supported in the hardware, it will be placed into hardware-supervised idle. This patch is an equal collaboration with Jon Hunter <jon-hunter@ti.com>. Ming Lei <ming.lei@canonical.com>, Will Deacon <will.deacon@arm.com>, Madhav Vij <mvij@ti.com>, Kevin Hilman <khilman@ti.com>, Benoît Cousson <b-cousson@ti.com>, and Santosh Shilimkar <santosh.shilimkar@ti.com> all made essential contributions to the understanding of EMU clockdomain power management on OMAP. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jon Hunter <jon-hunter@ti.com> Cc: Ming Lei <ming.lei@canonical.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Madhav Vij <mvij@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Jon Hunter <jon-hunter@ti.com>
2012-07-04ARM: OMAP4: clockdomain/CM code: Update supported transition modesJon Hunter
For OMAP3+ devices, the clock domains (CLKDMs) support one or more of the following transition modes ... NO_SLEEP (0x0) - A clock domain sleep transition is never initiated, irrespective of the hardware conditions. SW_SLEEP (0x1) - A software-forced sleep transition. The transition is initiated when the associated hardware conditions are satisfied SW_WKUP (0x2) - A software-forced clock domain wake-up transition is initiated, irrespective of the hardware conditions. HW_AUTO (0x3) - Hardware-controlled automatic sleep and wake-up transition is initiated by the PRCM module when the associated hardware conditions are satisfied. For OMAP4 devices, SW_SLEEP is equivalent to HW_AUTO and NO_SLEEP is equivalent to SW_WKUP. The only difference between HW_AUTO and SW_SLEEP for OMAP4 devices is that the PRM_IRQSTATUS_MPU.TRANSITION_ST interrupt status is set in case of SW_SLEEP transition, and not set in case of HW_AUTO transition. For OMAP4 devices, all CLKDMs support HW_AUTO and therefore we can place the CLKDMs in the HW_AUTO state instead of the SW_SLEEP mode. Hence, we do not need to use the SW_SLEEP mode. With regard to NO_SLEEP and SW_WKUP it is preferred to use SW_WKUP mode if the CLKDM supports it and so use this mode instead of NO_SLEEP where possible. For a software perspective the above 4 modes are represented by the following flags to indicate what modes are supported by each of the CLKDMs. CLKDM_CAN_DISABLE_AUTO --> NO_SLEEP CLKDM_CAN_ENABLE_AUTO --> HW_AUTO CLKDM_CAN_FORCE_SLEEP --> SW_SLEEP CLKDM_CAN_FORCE_WAKEUP --> SW_WKUP By eliminating the SW_SLEEP mode the the mapping of the flags for OMAP4 devices can becomes ... CLKDM_CAN_DISABLE_AUTO --> NO_SLEEP CLKDM_CAN_ENABLE_AUTO --> HW_AUTO CLKDM_CAN_FORCE_SLEEP --> HW_AUTO CLKDM_CAN_FORCE_WAKEUP --> SW_WKUP Cc: Ming Lei <ming.lei@canonical.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Reviewed-by: Benoit Cousson <b-cousson@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-19ARM: OMAP2+: clockdomains: make {prm,cm}_clkdm commonPaul Walmsley
The PRM and CM implicit clockdomains will soon be used by OMAP44xx. So, make them common to OMAP2+ and modify the OMAP4 clockdomains code so use of these clockdomains doesn't crash the system. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com>
2011-09-14OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomainPaul Walmsley
At Tony's request, remove the omap_chip bitmasks from the clockdomain and clockdomain dependency definitions. Instead, initialize clockdomains based on one or more lists that are applicable to a particular SoC family, variant, and silicon revision. Tony Lindgren <tony@atomide.com> found a bug in a previous version of this patch - thanks Tony. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2011-07-10OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programmingRajendra Nayak
Since the clkdm state programming is now done from within the hwmod framework (which uses a per-hwmod lock) instead of the being done from the clock framework (which used a global lock), there is now a need to have per-clkdm locking to prevent races between different hwmods/modules belonging to the same clock domain concurrently programming the clkdm state. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-25OMAP4: clockdomain: Add wkup/sleep dependency supportRajendra Nayak
Add OMAP4 platform specific implementation to support clkdm wkup and sleep dependencies a.k.a static dependencies. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: removed comment about PRM; zero-prefixed STATICDEP register offset; fixed loop termination condition in omap4_clkdm_clear_all_wkup_sleep_deps(); thanks to Kevin Hilman for finding and helping fix this bug] Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-25OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disableRajendra Nayak
Define the following architecture specific funtions for omap2/3/4 .clkdm_clk_enable .clkdm_clk_disable Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_k_enable as clkdm_clk_enable and omap2_clkdm_clk_disable as clkdm_clk_disable.a Remove unused functions (_enable/_disable_hwsup) and unsed headers from clockdomain.c file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-25OMAP: clockdomain: Arch specific funcs for hwsup control of clkdmRajendra Nayak
Define the following architecture specific funtions for omap2/3/4 .clkdm_allow_idle .clkdm_deny_idle Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_allow_idle as clkdm_allow_idle and omap2_clkdm_deny_idle as clkdm_deny_idle. Make the _clkdm_add_autodeps and _clkdm_del_autodeps as non-static so they can be accessed from OMAP2/3 platform specific code. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-25OMAP: clockdomain: Arch specific funcs for sleep/wakeup of clkdmRajendra Nayak
Define the following architecture specific funtions for omap2/3/4 .clkdm_sleep .clkdm_wakeup Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_wakeup as clkdm_wakeup and omap2_clkdm_sleep as clkdm_sleep. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: fixed omap3_clkdm_clear_all_sleepdeps() and omap2_clkdm_clear_all_wkdeps() to test against the correct loop termination condition; thanks to Kevin Hilman for finding and helping fix] Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>