summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2009-06-22Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (63 commits) mtd: OneNAND: Allow setting of boundary information when built as module jffs2: leaking jffs2_summary in function jffs2_scan_medium mtd: nand: Fix memory leak on txx9ndfmc probe failure. mtd: orion_nand: use burst reads with double word accesses mtd/nand: s3c6400 support for s3c2410 driver [MTD] [NAND] S3C2410: Use DIV_ROUND_UP [MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/write [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND [MTD] [NAND] S3C2410: Added a kerneldoc for s3c2410_nand_set mtd: physmap_of: Add multiple regions and concatenation support mtd: nand: max_retries off by one in mxc_nand mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440 mtd: onenand: add bbt_wait & unlock_all as replaceable for some platform mtd: Flex-OneNAND support mtd: nand: add OMAP2/OMAP3 NAND driver mtd: maps: Blackfin async: fix memory leaks in probe/remove funcs mtd: uclinux: mark local stuff static mtd: uclinux: do not allow to be built as a module mtd: uclinux: allow systems to override map addr/size mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITs ...
2009-06-22Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (49 commits) [ARM] idle: clean up pm_idle calling, obey hlt_counter [ARM] S3C: Fix gpio-config off-by-one bug [ARM] S3C64XX: add to_irq() support for EINT() GPIO [ARM] S3C64XX: clock.c: fix typo in usb-host clock ctrlbit [ARM] S3C64XX: fix HCLK gate defines [ARM] Update mach-types [ARM] wire up rt_tgsigqueueinfo and perf_counter_open OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLL OMAP3: Add support for DPLL3 divisor values higher than 2 OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers OMAP3 SRAM: add more comments on the SRAM code OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change OMAP3 clock: add a short delay when lowering CORE clk rate OMAP3 clock: initialize SDRC timings at kernel start OMAP3 clock: remove wait for DPLL3 M2 clock to stabilize [ARM] Add old Feroceon support to compressed/head.S [ARM] 5559/1: Limit the stack unwinding caused by a kthread exit [ARM] 5558/1: Add extra checks to ARM unwinder to avoid tracing corrupt stacks [ARM] 5557/1: Discard some ARM.ex*.*exit.text sections when !HOTPLUG or !HOTPLUG_CPU ...
2009-06-22[ARM] idle: clean up pm_idle calling, obey hlt_counterRussell King
pm_idle is used by infrastructure (eg, cpuidle) which expects architectures to call it in a certain way. Arrange for ARM to follow x86's lead on this and call pm_idle() with interrupts already disabled. However, we expect pm_idle() to enable interrupts before it returns. Also, OMAP wants to be able to disable hlt-ing, so allow hlt_counter to prevent all calls to pm_idle. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-22Merge branch 'next-s3c' of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King
2009-06-22[ARM] S3C: Fix gpio-config off-by-one bugMarek Szyprowski
Fix gpio-config off-by-one bug. Without this patch, touching GPA0 pin on S3C64XX platform causes kernel oops. Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22[ARM] S3C64XX: add to_irq() support for EINT() GPIOMarek Szyprowski
N group Add to_irq() function to onvert gpio to irq for external interrupt group (GPN). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22[ARM] S3C64XX: clock.c: fix typo in usb-host clock ctrlbitPeter Korsgaard
The usb-host clock was using the wrong define (the SCLK enable for the usb-host-bus) to change the HCLK register instead of the HCLK_UHOST bit. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22[ARM] S3C64XX: fix HCLK gate definesPeter Korsgaard
A few typos seems to have sneaked into the HCLK gate defines, causing the usb host clock to not get enabled. Fix them according to the reference manual and throw in the 3d accel bit for good measure. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-21Move FAULT_FLAG_xyz into handle_mm_fault() callersLinus Torvalds
This allows the callers to now pass down the full set of FAULT_FLAG_xyz flags to handle_mm_fault(). All callers have been (mechanically) converted to the new calling convention, there's almost certainly room for architectures to clean up their code and then add FAULT_FLAG_RETRY when that support is added. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-20[ARM] Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-20[ARM] wire up rt_tgsigqueueinfo and perf_counter_openRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits) Input: add driver for Synaptics I2C touchpad Input: synaptics - add support for reporting x/y resolution Input: ALPS - handle touchpoints buttons correctly Input: gpio-keys - change timer to workqueue Input: ads7846 - pin change interrupt support Input: add support for touchscreen on W90P910 ARM platform Input: appletouch - improve finger detection Input: wacom - clear Intuos4 wheel data when finger leaves proximity Input: ucb1400 - move static function from header into core Input: add driver for EETI touchpanels Input: ads7846 - more detailed model name in sysfs Input: ads7846 - support swapping x and y axes Input: ati_remote2 - use non-atomic bitops Input: introduce lm8323 keypad driver Input: psmouse - ESD workaround fix for OLPC XO touchpad Input: tsc2007 - make sure platform provides get_pendown_state() Input: uinput - flush all pending ff effects before destroying device Input: simplify name handling for certain input handles Input: serio - do not use deprecated dev.power.power_state Input: wacom - add support for Intuos4 tablets ...
2009-06-20Merge branch 'omap-clock-for-next' of git://git.pwsan.com/linux-2.6 into develRussell King
2009-06-19OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisonsRoel Kluin
with while (i++ < MAX_CLOCK_ENABLE_WAIT); i can reach MAX_CLOCK_ENABLE_WAIT + 1 after the loop, so if (i == MAX_CLOCK_ENABLE_WAIT) that's still success. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLLPaul Walmsley
Correspondence with the TI OMAP hardware team indicates that SDRC_DLLA_CTRL.FIXEDDELAY should be initialized to 0x0f. This number was apparently derived from process validation. This is only used when the SDRC DLL is unlocked (e.g., SDRC clock frequency less than 83MHz). Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19OMAP3: Add support for DPLL3 divisor values higher than 2Tero Kristo
Previously only 1 and 2 was supported. This is needed for DVFS VDD2 control. Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
2009-06-19OMAP3 SRAM: convert SRAM code to use macros rather than magic numbersPaul Walmsley
Convert omap3_sram_configure_core_dpll() to use macros rather than magic numbers. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19OMAP3 SRAM: add more comments on the SRAM codePaul Walmsley
Clean up comments and copyrights on the CORE DPLL3 M2 divider change code. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock changePaul Walmsley
Program the SDRC_MR_0 register as well during SDRC clock changes. This register allows selection of the memory CAS latency. Some SDRAM chips, such as the Qimonda HYB18M512160AF6, have a lower CAS latency at lower clock rates. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19OMAP3 clock: add a short delay when lowering CORE clk ratePaul Walmsley
When changing the SDRAM clock from 166MHz to 83MHz via the CORE DPLL M2 divider, add a short delay before returning to SDRAM to allow the SDRC time to stabilize. Without this delay, the system is prone to random panics upon re-entering SDRAM. This time delay varies based on MPU frequency. At 500MHz MPU frequency at room temperature, 64 loops seems to work okay; so add another 32 loops for environmental and process variation. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19OMAP3 clock: initialize SDRC timings at kernel startPaul Walmsley
On the OMAP3, initialize SDRC timings when the kernel boots. This ensures that the kernel is running with known, optimized SDRC timings, rather than whatever was configured by the bootloader. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19OMAP3 clock: remove wait for DPLL3 M2 clock to stabilizePaul Walmsley
The original CDP kernel that this code comes from waited for 0x800 loops after switching the CORE DPLL M2 divider. This does not appear to be necessary. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19Merge branch 'for-rmk' of git://git.marvell.com/orion into develRussell King
2009-06-19[ARM] Add old Feroceon support to compressed/head.SJoonyoung Shim
This patch supports the cache handling for some old Feroceon cores for which the CPU ID is like 0x41159260. This is a complement to commit ab6d15d50637fc25ee941710b23fed09ceb28db3. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-19[ARM] 5559/1: Limit the stack unwinding caused by a kthread exitCatalin Marinas
When a kthread function returns, it branches to do_exit(). However, the unwinding information isn't valid anymore and any stack trace caused by do_exit() may be incorrect. This patch adds a kernel_thread_exit() function and annotated with '.cantunwind' so that the unwinder stops when reaching it. Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19[ARM] 5558/1: Add extra checks to ARM unwinder to avoid tracing corrupt stacksCatalin Marinas
There are situations where the unwinder goes beyond stack boundaries and unwinds random data. This patch moves the stack boundaries check after the unwind_exec_insn() call and adds an extra check for possible infinite loops (like "mov pc, lr" with pc == lr). The patch also fixes a bug in the unwind instructions interpreter. The 0xb0 instruction can only set PC to LR if this wasn't already set by a previous instruction (this is used on exceptions taken while in kernel mode where svc_entry is annotated with ".save {r0 - pc}"). Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19[ARM] 5557/1: Discard some ARM.ex*.*exit.text sections when !HOTPLUG or ↵Catalin Marinas
!HOTPLUG_CPU Not discarding these sections when hotplug isn't available prevents the kernel from building. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19[ARM] 5540/1: 32-bit Thumb-2 {ld,st}{m,rd} alignment fault fixup supportGeorge G. Davis
From: Min Zhang <mzhang@mvista.com> Add alignment fault fixup support for 32-bit Thumb-2 LDM, LDRD, POP, PUSH, STM and STRD instructions. Alignment fault fixup support for the remaining 32-bit Thumb-2 load/store instruction cases is not included since ARMv6 and later processors include hardware support for loads and stores of unaligned words and halfwords. Signed-off-by: Min Zhang <mzhang@mvista.com> Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19[ARM] 5556/1: Fix the irq_desc.cpu referencesCatalin Marinas
The cpu member of struct irq_desc was recently renamed to node. The patch renames the ARM references to the old member. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19[ARM] 5555/1: RealView: Include asm/smp_twd.h in realview-pbx.cCatalin Marinas
This header file is needed for twd_base. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-18Merge branch 'next-s3c' of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King
2009-06-18Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-06-17Delete pcibios_select_rootMatthew Wilcox
This function was only used by pci_claim_resource(), and the last commit deleted that use. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (425 commits) V4L/DVB (11870): gspca - main: VIDIOC_ENUM_FRAMESIZES ioctl added. V4L/DVB (12004): poll method lose race condition V4L/DVB (11894): flexcop-pci: dmesg visible names broken V4L/DVB (11892): Siano: smsendian - declare function as extern V4L/DVB (11891): Siano: smscore - bind the GPIO SMS protocol V4L/DVB (11890): Siano: smscore - remove redundant code V4L/DVB (11889): Siano: smsdvb - add DVB v3 events V4L/DVB (11888): Siano: smsusb - remove redundant ifdef V4L/DVB (11887): Siano: smscards - add board (target) events V4L/DVB (11886): Siano: smscore - fix some new GPIO definitions names V4L/DVB (11885): Siano: Add new GPIO management interface V4L/DVB (11884): Siano: smssdio - revert to stand alone module V4L/DVB (11883): Siano: cards - add two additional (USB) devices V4L/DVB (11824): Siano: smsusb - change exit func debug msg V4L/DVB (11823): Siano: smsusb - fix typo in module description V4L/DVB (11822): Siano: smscore - bug fix at get_device_mode V4L/DVB (11821): Siano: smscore - fix isdb-t firmware name V4L/DVB (11820): Siano: smscore - fix byte ordering bug V4L/DVB (11819): Siano: smscore - fix get_common_buffer bug V4L/DVB (11818): Siano: smscards - assign gpio to HPG targets ...
2009-06-16Merge branch 'akpm'Linus Torvalds
* akpm: (182 commits) fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset fbdev: *bfin*: fix __dev{init,exit} markings fbdev: *bfin*: drop unnecessary calls to memset fbdev: bfin-t350mcqb-fb: drop unused local variables fbdev: blackfin has __raw I/O accessors, so use them in fb.h fbdev: s1d13xxxfb: add accelerated bitblt functions tcx: use standard fields for framebuffer physical address and length fbdev: add support for handoff from firmware to hw framebuffers intelfb: fix a bug when changing video timing fbdev: use framebuffer_release() for freeing fb_info structures radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb? s3c-fb: CPUFREQ frequency scaling support s3c-fb: fix resource releasing on error during probing carminefb: fix possible access beyond end of carmine_modedb[] acornfb: remove fb_mmap function mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF mb862xxfb: restrict compliation of platform driver to PPC Samsung SoC Framebuffer driver: add Alpha Channel support atmel-lcdc: fix pixclock upper bound detection offb: use framebuffer_alloc() to allocate fb_info struct ... Manually fix up conflicts due to kmemcheck in mm/slab.c
2009-06-16mm: consolidate init_mm definitionAlexey Dobriyan
* create mm/init-mm.c, move init_mm there * remove INIT_MM, initialize init_mm with C99 initializer * unexport init_mm on all arches: init_mm is already unexported on x86. One strange place is some OMAP driver (drivers/video/omap/) which won't build modular, but it's already wants get_vm_area() export. Somebody should look there. [akpm@linux-foundation.org: add missing #includes] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16[ARM] S3C2440: Merge branch next-mini2440 into next-s3cBen Dooks
Merge branch 'next-mini2440' into next-s3c
2009-06-16[ARM] GTA02/FreeRunner: Add machine definitionAndy Green
This patch introduces the Openmoko GTA02 machine definition. Much of the code is based on Harald Welte's work, although it has been largely rewritten several times. This is intended to be the minimum machine definition to boot and be able to run a rootfs from NAND on GTA02 / FreeRunner. It does not bring up the framebuffer / Glamo and lacks many other peripheral drivers from outside the SoC. But once we have this basis in mainline kernel, we will be able to introduce the other drivers and add them here. Thanks to Sven Rebhan <odinshorse@googlemail.com> for his fixes to this patch (Kconfig and defconfig files). Signed-off-by: Andy Green <andy@warmcat.com> Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net> [ben-linux@fluff.org: Fix the GPIO definitions] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16[ARM] S3C64XX: Initial support for DVFSMark Brown
This patch provides initial support for CPU frequency scaling on the Samsung S3C ARM processors. Currently only S3C6410 processors are supported, though addition of another data table with supported clock rates should be sufficient to enable support for further CPUs. Use the regulator framework to provide optional support for DVFS in the S3C cpufreq driver. When a software controllable regulator is configured the driver will use it to lower the supply voltage when running at a lower frequency, giving improved power savings. When regulator support is disabled or no regulator can be obtained for VDDARM the driver will fall back to scaling only the frequency. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16[ARM] S3C64XX: Add device for IISv4 portMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16[ARM] S3C64XX: Provide device for IIS portsMark Brown
This allows the S3C64XX IIS drivers to be converted to the standard driver model and allows fixes there for problems with attempting to acquire the clocks for the IIS blocks via the clock API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16[ARM] S3C24XX: remove duplicated #includeHuang Weiyi
Remove duplicated #include in arch/arm/mach-s3c2410/usb-simtec.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16[ARM] VIC: Fix resume sources usageBen Dooks
The resume_mask wasn't being checked in vic_set_wake() to see if the IRQ was a valid wakeup source. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16V4L/DVB (11607): soc-camera: add a free_bus method to struct soc_camera_linkGuennadi Liakhovetski
Currently pcm990 camera bus-width management functions request a GPIO and never free it again. With this approach the GPIO extender driver cannot be unloaded once camera drivers have been loaded, also unloading theb i2c-pxa bus driver produces errors, because the GPIO extender driver cannot unregister properly. Another problem is, that if camera drivers are once loaded before the GPIO extender driver, the platform code marks the GPIO unavailable and only a reboot helps to recover. Adding an explicit free_bus method and using it in mt9m001 and mt9v022 drivers fixes these problems. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16[ARM] pxa: register wm8731 explicitly for corgi and poodleMark Brown
The wm8731 driver has been converted to register using the standard I2C device registration mechanism so we can now do the registration in the arch/arm code as normal. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-16[ARM] pxa/mioa701: add V3 gain configuration for Maxim 1586 voltage regulatorPhilipp Zabel
Maxim 1586 V3 gain can be configured by external resistors (R24, R25) connected to the FB3 pin. To avoid accidental overvoltage, it now requires this gain to be configured explicitly. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-16[ARM] pxa/mioa701: add Maxim 1586 voltage regulatorRobert Jarzmik
On this board, the PXA272 CPU voltage VCC_CORE is provided by a Maxim 1586 voltage regulator. Use the regulator framework to provide VCC_CORE control. When cpufreq will be updated to ask for vcc_core, this will optimize power drained by the board. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-16[ARM] pxa/hx4700: add Maxim 1587A voltage regulatorPhilipp Zabel
On this board, the PXA270 CPU voltage VCC_CORE is provided by a Maxim 1587A voltage regulator configured to provide 1.55 V maximum voltage for 624 MHz operation. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-16[ARM] pxa/treo680: initial supportTomas 'Sleep_Walker' Cech
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-16[ARM] pxa/em-x270: fix type in SND_PXA2XX_LIB_AC97Mike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>