summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2007-03-31[ARM] Export dma_channel_active()Russell King
dma_channel_active() is used by some modules and is part of our DMA API, so export it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-29[ARM] 4289/1: AT91: SAM9260 NAND flash timingAndrew Victor
Fix the NAND flash timings on the AT91SAM9260. The current timings lead to the detection of a number of bad blocks. These timings are now set the same as on the AT91SAM9263. Patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-24Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4278/1: configure pxa27x I2C SCL as "input" [ARM] 4272/1: Missing symbol h1940_pm_return fix [ARM] 4235/1: ns9xxx: declare the clock functions as "const" [ARM] 4271/1: iop32x: fix ep80219 detection (support iq80219 platforms) [ARM] 4270/2: mach-s3c2443/irq.c off by one error in dma irqs
2007-03-20[ARM] 4272/1: Missing symbol h1940_pm_return fixKrzysztof Helt
Added missing ifdefs, to make kernel linkable without the PM support. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-19Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4264/1: ldrex/strex syntax errors with recent compilers [ARM] Fix breakage caused by 72486f1f8f0a2bc828b9d30cf4690cf2dd6807fc
2007-03-18[PATCH] gpio_direction_output-needs-an-initial-value fixDavid Brownell
Build fix: sa1100/generic.c should already have included <asm/gpio.h>, but it didn't ... causing a build problem with a recent patch. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-17[ARM] 4271/1: iop32x: fix ep80219 detection (support iq80219 platforms)Dan Williams
An iq80219 is a board with an iq31244 layout and an 80219 processor. It breaks the current assumption that all 80219 processors run on ep80219 platforms. This patch adds the "force_ep80219" option to the kernel to override boot loaders that have passed in the iq31244 id, and adds the MACHINE_START definition for ep80219. [ patch assumes that EP80219 has been added to mach-types ] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-17[ARM] 4270/2: mach-s3c2443/irq.c off by one error in dma irqsGraeme Gregory
This patch corrects an error when demuxing the DMA irq's DMA1 was used as a base and this should have been DMA0. Without this fix we do not process DMA0 irq's and the system effectively locks up in a loop trying the process the irq it never can. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-16[PATCH] gpio_direction_output() needs an initial valueDavid Brownell
It's been pointed out that output GPIOs should have an initial value, to avoid signal glitching ... among other things, it can be some time before a driver is ready. This patch corrects that oversight, fixing - documentation - platforms supporting the GPIO interface - users of that call (just one for now, others are pending) There's only one user of this call for now since most platforms are still using non-generic GPIO setup code, which in most cases already couples the initial value with its "set output mode" request. Note that most platforms are clear about the hardware letting the output value be set before the pin direction is changed, but the s3c241x docs are vague on that topic ... so those chips might not avoid the glitches. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <andrew@sanpeople.com> Acked-by: Milan Svoboda <msvoboda@ra.rockwell.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-13[ARM] Fix breakage caused by 72486f1f8f0a2bc828b9d30cf4690cf2dd6807fcRussell King
72486f1f8f0a2bc828b9d30cf4690cf2dd6807fc inverted the sense for enabling hotplug CPU controls without reference to any other architecture other than i386, ia64 and PowerPC. This left everyone else without hotplug CPU control. Fix ARM for this brain damage. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-12[ARM] 4255/1: i.MX/MX1 Correct MPU PLL reference clock value.Pavel Pisa
Only System PLL clock source is selectable by CSCR_SYSTEM_SEL bit. MPU PLL is driven by 512*CLK32 for each case. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-12[ARM] 4254/1: i.MX/MX1 CPU Frequency scaling honor boot loader set BCLK_DIV.Pavel Pisa
The minimal bus clock prescaler should be kept at value selected by the board / boot loader designer. Switching frequency above startup limit could lead to the external memory/devices misbehave. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-08Merge branch 'omap-fixes' of ↵Russell King
master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2007-03-08[ARM] 4251/1: Fix sharpsl_pm dependencyRichard Purdie
The sharpsl_pm code depends on some symbols in the APM emulation code. Add the dependency for now until a better solution can be found. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-08[ARM] 4249/1: Fix tosa compile failureRichard Purdie
Fix tosa compile failure from commit 32f3f49910c7e228839c1cd144dbed8da342703b Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-08[ARM] 4247/1: Fix long name for cc9p9360devUwe Kleine-König
The Product Manager of the cc9p insist on using the correct product names. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-07ARM: OMAP: Fix OMAP2 dss2 so clk_set_parent worksRichard Woodruff
This adds the delayed application attribute to the dss2 clock. DSS2 can't select the 48MHz APLL with properly with out validating the configuration as trigged by this flag. Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-07ARM: OMAP: Fix missing workqueue include in board-h2.cDirk Behme
ARM: OMAP: Fix missing #include <linux/workqueue.h> in board-h2.c resulting in In file included from arch/arm/mach-omap1/board-h2.c:40: include/asm/arch/irda.h:27: error: field 'gpio_expa' has incomplete type Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-07ARM: OMAP: Include missing headerTony Lindgren
Include missing header for do_div() Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-05[PATCH] add CONFIG_GENERIC_GPIODavid Brownell
Most drivers using GPIOs already know they are running on a system that supports the generic GPIO calls, because of other platform dependencies. But the generic GPIO-based LED and input button drivers can't know that. So this patch adds a Kconfig hook, GENERIC_GPIO, to mark the platforms where <asm/gpio.h> will do the right thing. Currently that's a bunch of ARMs, and AVR32; more are on the way. It also fixes a dependency bug for the gpio button input driver; it was wrong to start with, now it covers all platforms with GENERIC_GPIO. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Richard Purdie <rpurdie@rpsys.net> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: <raph@8d.com> Cc: <msvoboda@ra.rockwell.com> Cc: pHilipp Zabel <philipp.zabel@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-03[ARM] EBSA110: Work around build errorsRussell King
Work around EBSA110 build errors by selecting NO_IOPORT. EBSA110 can't support an IO port to MMIO mapping mechanism because the MMIO and IO port spaces have quite different and complex addressing requirements. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-02Merge branch 'omap-fixes' of ↵Russell King
master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2007-03-02[ARM] 4239/1: S3C24XX: Update kconfig entries for PMBen Dooks
Update help text with location of documentation and duplicate the note on the speed of CRC Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-02[ARM] 4237/2: oprofile: Always allow backtraces on ARMRichard Purdie
Always allow backtrace when using oprofile on ARM, even if a PMU isn't present. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-02[ARM] Yet more asm/apm-emulation.h stuffRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-02ARM: OMAP: Use linux/delay.h not asm/delay.hTony Lindgren
Use linux/delay.h not asm/delay.h Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: omap1510->15xx conversions needed for sx1Vladimir Ananiev
Convert 1510->15xx in generic omap code, so that sx1 can work. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Add missing includes to board-nokia770Dirk Behme
Add missing includes to board-nokia770 to make it compile again. Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Workqueue changes for board-h4.cDirk Behme
Workqueue changes for board-h4.c Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: dmtimer.c omap1 register fixMatthew Percival
When I went to use dmtimer7 it did not seem to work. I noticed that the base addresses for dmtimers 7 and 8 were set wrong. A simple patch to correct a small error. Confirmed to fix the problem on an OSK. Signed-off-by: Matthew Percival <matthew@capgo.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: board-nokia770: correct lcd nameArnaud Patard
Some time ago, the 'lcd_lph8923' device was renamed to 'lcd_mipid' but the board-nokia770.c file was not updated accordingly, leading to not working lcd. This one-liner fixe the trouble. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: omap GP timer: HZ != 100David Brownell
Teach OMAP2 gp timer that HZ isn't always 100. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Fix warning in mach-omap1Dirk Behme
Fix warning arch/arm/mach-omap1/pm.c: In function 'omap_pm_init': arch/arm/mach-omap1/pm.c:765: warning: ignoring return value of 'subsys_create_file', declared with attribute warn_unused_result Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Fix CONFIG_DEBUG_LLDirk Behme
Fix broken CONFIG_DEBUG_LL. In case of low level debugging reconfigure some clocks early. See http://source.mvista.com/git/gitweb.cgi?p=linux-omap-2.6.git;a=commitdiff;h=3bfb289ccc6c4624fd5ff0381546935e105f4093 too. Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Fix warning in mach-omap2Dirk Behme
Fix warning arch/arm/mach-omap2/timer-gp.c: In function 'omap2_gp_timer_init': arch/arm/mach-omap2/timer-gp.c:70: warning: implicit declaration of function 'setup_irq' Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Fix warnings in plat-omapDirk Behme
Fix warnings arch/arm/plat-omap/dmtimer.c: In function 'omap_dm_timer_modify_idlect_mask': arch/arm/plat-omap/dmtimer.c:317: warning: no return statement in function returning non-void arch/arm/plat-omap/mailbox.c: In function 'omap_mbox_init': arch/arm/plat-omap/mailbox.c:231: warning: ignoring return value of 'class_device_create_file', declared with attribute warn_unused_result Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: No IRQF_TRIGGER set_type function for IRQ 353 (MPUIO)Dirk Behme
No IRQF_TRIGGER set_type function for IRQ 353 (MPUIO) Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: OMAP310 SerialMarek Vašut
This makes serial usable also on omap310, not only 1510. (changing 1510->15xx) Signed-off-by: Marek Vašut <marek.vasut@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Proper handling of DMA4_IRQSTATUS_L0Timo Teras
The register bits are reset by writing one. Remove the unneeded reads and fix writes to not clear too many bits. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Fix warning in clock.cDirk Behme
Fix warning: arch/arm/mach-omap1/clock.c: In function 'omap1_clk_enable_generic': arch/arm/mach-omap1/clock.c:499: warning: 'return' with no value, in function returning non-void Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: correct misc 15xx and non-15xx platform codeAndrzej Zaborowski
Disable accesses to SOFT_REQ_REG2 and ULPD_SOFT_DISABLE_REQ_REG registers for 15xx processors that don't have these registers. Enable level 2 interrupt handler for processors that identify as OMAP 15xx (e.g 310) and not 1510 specifically. Also fix the following compiler warning (only visible with CONFIG_OMAP_RESET_CLOCKS): arch/arm/mach-omap1/clock.c: In function 'omap1_clk_disable_unused': arch/arm/mach-omap1/clock.c:634: warning: 'return' with a value, in function returning void Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-02-26Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] CLPS7500 doesn't have IO ports [ARM] Fix more apm-emulation.h [ARM] 4234/1: Introduce get_irqnr_preamble and arch_ret_to_user for ns9xxx. [ARM] 4233/1: nand/s3c2410.c: warning fix [ARM] 4226/1: initial .data and .bss mappings of XIP kernel should be TEXT_OFFSET [ARM] 4224/2: allow XIP kernel to boot again [ARM] 4232/1: AT91: Generic GPIO bug [ARM] 4231/1: AT91: Merge and typo fixes. [ARM] 4229/1: S3C2410: Add MACH_QT2410 to s3c2410_defconfig [ARM] 4228/2: S3C24XX: update s3c2410_defconfig for 2.6.21-rc1
2007-02-26[ARM] CLPS7500 doesn't have IO portsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-26[ARM] Fix more apm-emulation.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-25[ARM] 4226/1: initial .data and .bss mappings of XIP kernel should be ↵Nicolas Pitre
TEXT_OFFSET aware Since TEXT_OFFSET is meant to determine RAM location for kernel use, itshould affect .data and .bss initial mapping in the XIP case. Otherwise a XIP kernel would crash if TEXT_OFFSET gets somewhat larger than 2MB. Corresponding code is also moved up a bit to be near the similar .text mapping code making the whole a bit more straight forward to understand. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-25[ARM] 4224/2: allow XIP kernel to boot againNicolas Pitre
Since commit 2552fc27ff79b10b9678d92bcaef21df38bb7bb6 XIP kernels failed to boot because (_end - PAGE_OFFSET - 1) is much smaller than the size of the kernel text and data in the XIP case, causing the kernel not to be entirely mapped. Even in the non-XIP case, the use of (_end - PAGE_OFFSET - 1) is wrong because it produces a too large value if TEXT_OFFSET is larger than 1MB. Finally the original code was performing one loop too many. Let's break the loop when the section pointer has passed the last byte of the kernel instead. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-22[ARM] 4232/1: AT91: Generic GPIO bugAndrew Victor
The new gpio_direction_input() and gpio_direction_output() functions were both enabling output mode. When configuring a GPIO for input mode, you need to program the ODR (Output Disable Register). Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-22[ARM] 4231/1: AT91: Merge and typo fixes.Andrew Victor
The duplicate file "include/asm-arm/arch-at91rm9200/entry-macro.S" can be removed - it was already moved to include/asm-arm/arch-at91/. Fix 3 small typo's - two in comments, and the incorrect clock was specified for the LCD device. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-22[ARM] 4229/1: S3C2410: Add MACH_QT2410 to s3c2410_defconfigBen Dooks
Add the Armzone QT2410 to the list of built machines in the s3c2410_defconfig Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-22[ARM] 4228/2: S3C24XX: update s3c2410_defconfig for 2.6.21-rc1Ben Dooks
Udpate s3c2410_defconfig for 2.6.21-rc1 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 13:38:22 +0000