summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2011-05-06hw_breakpoints, powerpc: Fix CONFIG_HAVE_HW_BREAKPOINT off-case in ↵Frederic Weisbecker
ptrace_set_debugreg() We make use of ptrace_get_breakpoints() / ptrace_put_breakpoints() to protect ptrace_set_debugreg() even if CONFIG_HAVE_HW_BREAKPOINT if off. However in this case, these APIs are not implemented. To fix this, push the protection down inside the relevant ifdef. Best would be to export the code inside CONFIG_HAVE_HW_BREAKPOINT into a standalone function to cleanup the ifdefury there and call the breakpoint ref API inside. But as it is more invasive, this should be rather made in an -rc1. Fixes this build error: arch/powerpc/kernel/ptrace.c:1594: error: implicit declaration of function 'ptrace_get_breakpoints' make[2]: *** Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: LPPC <linuxppc-dev@lists.ozlabs.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: v2.6.33.. <stable@kernel.org> Link: http://lkml.kernel.org/r/1304639598-4707-1-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-04Merge branch 'perf/urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/urgent
2011-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) sysctl: net: call unregister_net_sysctl_table where needed Revert: veth: remove unneeded ifname code from veth_newlink() smsc95xx: fix reset check tg3: Fix failure to enable WoL by default when possible networking: inappropriate ioctl operation should return ENOTTY amd8111e: trivial typo spelling: Negotitate -> Negotiate ipv4: don't spam dmesg with "Using LC-trie" messages af_unix: Only allow recv on connected seqpacket sockets. mii: add support of pause frames in mii_get_an net: ftmac100: fix scheduling while atomic during PHY link status change usbnet: Transfer of maintainership usbnet: add support for some Huawei modems with cdc-ether ports bnx2: cancel timer on device removal iwl4965: fix "Received BA when not expected" iwlagn: fix "Received BA when not expected" dsa/mv88e6131: fix unknown multicast/broadcast forwarding on mv88e6085 usbnet: Resubmit interrupt URB if device is open iwl4965: fix "TX Power requested while scanning" iwlegacy: led stay solid on when no traffic b43: trivial: update module info about ucode16_mimo firmware ...
2011-04-26Revert wrong fixes for common misspellingsLucas De Marchi
These changes were incorrectly fixed by codespell. They were now manually corrected. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-04-25powerpc, hw_breakpoints: Fix racy access to ptrace breakpointsFrederic Weisbecker
While the tracer accesses ptrace breakpoints, the child task may concurrently exit due to a SIGKILL and thus release its breakpoints at the same time. We can then dereference some freed pointers. To fix this, hold a reference on the child breakpoints before manipulating them. Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Prasad <prasad@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: v2.6.33.. <stable@kernel.org> Link: http://lkml.kernel.org/r/1302284067-7860-4-git-send-email-fweisbec@gmail.com
2011-04-21powerpc: Fix multicast problem in fs_enet driverAndrea Galbusera
mac-fec.c was setting individual UDP address registers instead of multicast group address registers when joining a multicast group. This prevented from correctly receiving UDP multicast packets. According to datasheet, replaced hash_table_high and hash_table_low with grp_hash_table_high and grp_hash_table_low respectively. Also renamed hash_table_* with grp_hash_table_* in struct fec declaration for 8xx: these registers are used only for multicast there. Tested on a MPC5121 based board. Build tested also against mpc866_ads_defconfig. Signed-off-by: Andrea Galbusera <gizero@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18powerpc/powermac: Build fix with SMP and CPU hotplugBenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-18powerpc/perf_event: Skip updating kernel counters if register value shrinksEric B Munson
Because of speculative event roll back, it is possible for some event coutners to decrease between reads on POWER7. This causes a problem with the way that counters are updated. Delta calues are calculated in a 64 bit value and the top 32 bits are masked. If the register value has decreased, this leaves us with a very large positive value added to the kernel counters. This patch protects against this by skipping the update if the delta would be negative. This can lead to a lack of precision in the coutner values, but from my testing the value is typcially fewer than 10 samples at a time. Signed-off-by: Eric B Munson <emunson@mgebm.net> Cc: stable@kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-18powerpc: Don't write protect kernel text with CONFIG_DYNAMIC_FTRACE enabledStefan Roese
This problem was noticed on an MPC855T platform. Ftrace did oops when trying to write to the kernel text segment. Many thanks to Joakim for finding the root cause of this problem. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joakim Tjernlund <joakim.tjernlund@transmode.se> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-18powerpc: Fix oops if scan_dispatch_log is called too earlyAnton Blanchard
We currently enable interrupts before the dispatch log for the boot cpu is setup. If a timer interrupt comes in early enough we oops in scan_dispatch_log: Unable to handle kernel paging request for data at address 0x00000010 ... .scan_dispatch_log+0xb0/0x170 .account_system_vtime+0xa0/0x220 .irq_enter+0x88/0xc0 .do_IRQ+0x48/0x230 The patch below adds a check to scan_dispatch_log to ensure the dispatch log has been allocated. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-18powerpc/pseries: Use a kmem cache for DTL buffersNishanth Aravamudan
PAPR specifies that DTL buffers can not cross AMS environments (aka CMO in the PAPR) and can not cross a memory entitlement granule boundary (4k). This is found in section 14.11.3.2 H_REGISTER_VPA of the PAPR. kmalloc does not guarantee an alignment of the allocation, though, beyond 8 bytes (at least in my understanding). Create a special kmem cache for DTL buffers with the alignment requirement. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-18powerpc/kexec: Fix regression causing compile failure on UPPaul Gortmaker
Recent commit b987812b3fcaf70fdf0037589e5d2f5f2453e6ce caused a compile failure on UP because a considerably large block of the file was included within CONFIG_SMP, hence making a stub function not exposed on UP builds when it needed to be. Relocate the stub to the #else /* ! CONFIG_SMP */ section and also annotate the relevant else/endif so that nobody else falls into the same trap I did. Reported-by: Michael Guntsche <mike@it-loops.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-18Merge remote branch 'kumar/merge' into mergeBenjamin Herrenschmidt
2011-04-14RapidIO/mpc85xx: fix possible mport registration problemsAlexandre Bounine
Fix a possible problem with mport registration left non-cleared after fsl_rio_setup() exits on link error. Abort mport initialization if registration failed. This patch is applicable to 2.6.39-rc1 only. The problem does not exist for earlier versions. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-12powerpc/85xx: disable Suspend support if SMP enabledKumar Gala
We currently dont have CPU Hotplug support working on 85xx so we need to disable Suspsend support as it will force enabling of CPU Hotplug. arch/powerpc/kernel/built-in.o: In function `cpu_die': arch/powerpc/kernel/smp.c:702: undefined reference to `start_secondary_resume' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-12powerpc/e500mc: Remove CPU_FTR_MAYBE_CAN_NAP/CPU_FTR_MAYBE_CAN_DOZEScott Wood
e500mc does not support the HID0/MSR mechanism that is used by e500_idle (and there are also issues with waking on certain types of interrupts). Further, even if napping is never actually enabled, just having CPU_FTR_CAN_NAP will cause machine_init() to overwrite the board's supplied ppc_md.power_save(). We drop CPU_FTR_MAYBE_CAN_DOZE becuase we should use 'wait' instead on e500mc. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-12powerpc/book3e: Fix CPU feature handling on 64-bit e5500Kumar Gala
The CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS defines did not encompass e5500 CPU features when built for 64-bit. This causes issues with cpu_has_feature() as it utilizes the POSSIBLE & ALWAYS defines as part of its check. Create a unique CPU_FTRS_E5500 (as its different from CPU_FTRS_E500MC), created a new group for 64-bit Book3e based CPUs and add CPU_FTRS_E5500 to that group. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-12powerpc: Check device status before adding serial devicePrabhakar Kushwaha
serial port nodes with the property status="disabled" are not usable and so avoid adding "disabled" port with the system. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-12powerpc/85xx: Don't add disabled PCIe devicesPrabhakar Kushwaha
PCIe nodes with the property status="disabled" are not usable and so avoid adding "disabled" PCIe bridge with the system. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-11PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKSRafael J. Wysocki
Xen save/restore is going to use hibernate device callbacks for quiescing devices and putting them back to normal operations and it would need to select CONFIG_HIBERNATION for this purpose. However, that also would cause the hibernate interfaces for user space to be enabled, which might confuse user space, because the Xen kernels don't support hibernation. Moreover, it would be wasteful, as it would make the Xen kernels include a substantial amount of code that they would never use. To address this issue introduce new power management Kconfig option CONFIG_HIBERNATE_CALLBACKS, such that it will only select the code that is necessary for the hibernate device callbacks to work and make CONFIG_HIBERNATION select it. Then, Xen save/restore will be able to select CONFIG_HIBERNATE_CALLBACKS without dragging the entire hibernate code along with it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-05powerpc/pseries: Fix build without CONFIG_HOTPLUG_CPUMatt Evans
Signed-off-by: Matt Evans <matt@ozlabs.au.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-05powerpc: Set nr_cpu_ids early and use it to free PACAsRyan Grimm
Without this, "holes" in the CPU numbering can cause us to free too many PACAs Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-05powerpc/pseries: Don't register global initcallBenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-05powerpc/kexec: Fix mismatched ifdefs for PPC64/SMP.Paul Gortmaker
Commit b3df895aebe091b1657 "powerpc/kexec: Add support for FSL-BookE" introduced the original PPC_STD_MMU_64 checks around the function crash_kexec_wait_realmode(). Then commit c2be05481f61252 "powerpc: Fix default_machine_crash_shutdown #ifdef botch" changed the ifdef around the calling site to add a check on SMP, but the ifdef around the function itself was left unchanged, leaving an unused function for PPC_STD_MMU_64=y and SMP=n Rather than have two ifdefs that can get out of sync like this, simply put the corrected conditional around the function and use a stub to get rid of one set of ifdefs completely. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-05Merge remote branch 'kumar/merge' into mergeBenjamin Herrenschmidt
2011-04-04Documentation: fix minor typos/spellingSylvestre Ledru
Fix some minor typos: * informations => information * there own => their own * these => this Signed-off-by: Sylvestre Ledru <sylvestre.ledru@scilab.org> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04powerpc/85xx: Update dts for PCIe memory maps to match u-boot of Px020RDBPrabhakar Kushwaha
PCIe memory address space is 1:1 mapped with u-boot. Update dts of Px020RDB i.e. P1020RDB and P2020RDB to match the address map changes in u-boot. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-01powerpc/pmac/smp: Remove no-longer needed preempt workaroundBenjamin Herrenschmidt
The generic code properly re-initializes the preempt count in the idle thread now Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc/smp: Increase vdso_data->processorCount, not just decrease itBenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc/smp: Create idle threads on demand and properly reset themBenjamin Herrenschmidt
Instead of creating idle threads at boot for all possible CPUs, we create them on demand, like x86 or ARM, and we properly call init_idle to re-initialize an idle thread when a CPU was unplugged and is now re-plugged. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc/smp: Don't expose per-cpu "cpu_state" arrayBenjamin Herrenschmidt
Instead, keep it static, expose an accessor and use that from the PowerMac code. Avoids easy namespace collisions and will make it easier to consolidate with other implementations. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc/pmac/smp: Fix CPU hotplug crashes on some machinesBenjamin Herrenschmidt
On some machines that use i2c to synchronize the timebases (such as PowerMac7,2/7,3 G5 machines), hotplug CPU would crash when putting back a new CPU online due to the underlying i2c bus being closed. This uses the newly added bringup_done() callback to move the close along with other housekeeping calls, and adds a CPU notifier to re-open the i2c bus around subsequent hotplug operations Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc/smp: Add a smp_ops->bringup_up() done callbackBenjamin Herrenschmidt
This allows us to stop abusing smp_ops->setup_cpu() for cleanup tasks that have to take place after the initial boot time CPU bringup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc/pmac/smp: Properly NAP offlined CPU on G5Benjamin Herrenschmidt
The current code soft-disables, and then goes to NAP mode which turns interrupts on. That means that if an interrupt occurs, we will hit the masked interrupt code path which isn't what we want, as it will return with EE off, which will either get us out of NAP mode, or fail to enter it (according to spec). Instead, let's just rely on the fact that it is safe to take decrementer interrupts on an offline CPU and leave interrupts enabled. We can also get rid of the special case in asm for power4_cpu_offline_powersave() and just use power4_idle(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc/pmac/smp: Remove HMT changes for PowerMac offline codeBenjamin Herrenschmidt
Those instructions do nothing on non-threaded processors such as 970's used on those machines. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc/pmac/smp: Consolidate 32-bit and 64-bit PowerMac cpu_die in one fileBenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc/pmac/smp: Fixup smp_core99_cpu_disable() and use it on 64-bitBenjamin Herrenschmidt
Use the generic code, just add the MPIC priority setting, I don't see any use in mucking around with the decrementer, as 32-bit will have EE off all along, and 64-bit will be able to deal with it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc/pmac/smp: Rename fixup_irqs() to migrate_irqs() and use it on ppc32Benjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc/pmac/smp: Fix 32-bit PowerMac cpu_dieBenjamin Herrenschmidt
Use generic cpu_state, call idle_task_exit() properly, and remove smp_core99_cpu_die() which isn't useful, the generic function does the job just fine.
2011-04-01powerpc/smp: Remove unused smp_ops->cpu_enable()Benjamin Herrenschmidt
Remove the last remnants of cpu_enable(), everybody uses the normal __cpu_up() path now Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc/smp: Remove unused generic_cpu_enable()Benjamin Herrenschmidt
Nobody uses it, besides we should always use the normal __cpu_up path anyways Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc/smp: Fix generic_mach_cpu_die()Benjamin Herrenschmidt
This is used by some "soft" hotplug implementations. I needs to call idle_task_exit() when the CPU is going away, and we remove the now no-longer needed set_cpu_online() and local_irq_enable() which are handled by the return to start_secondary Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc/smp: soft-replugged CPUs must go back to start_secondaryBenjamin Herrenschmidt
Various thing are torn down when a CPU is hot-unplugged. That CPU is expected to go back to start_secondary when re-plugged to re initialize everything, such as clock sources, maps, ... Some implementations just return from cpu_die() callback in the idle loop when the CPU is "re-plugged". This is not enough. We fix it using a little asm trampoline which resets the stack and calls back into start_secondary as if we were all fresh from boot. The trampoline already existed on ppc64, but we add it for ppc32 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-01powerpc: Make decrementer interrupt robust against offlined CPUsBenjamin Herrenschmidt
With some implementations, it is possible that a timer interrupt occurs every few seconds on an offline CPU. In this case, just re-arm the decrementer and return immediately Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-30Merge branch 'irq-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: avr32: Fix missing irq namespace conversion powerpc: qe_ic: Rename get_irq_desc_data and get_irq_desc_chip genirq: Remove the now obsolete config options and select statements arm: versatile : Fix typo introduced in irq namespace cleanup sound: Fixup the last user of the old irq functions genirq: Remove obsolete comment genirq: Remove now obsolete set_irq_wake() sh: Fix irq cleanup fallout x86: apb_timer: Fixup genirq fallout genirq: Fix misnamed label in handle_edge_eoi_irq Fix up crazy conflict in arch/powerpc/include/asm/qe_ic.h: - commit eead4d5c63ff ("powerpc: qe_ic: Rename get_irq_desc_data and get_irq_desc_chip") made the helper functions use irq_desc_get_handler_data() instead of the legacy (and no longer existing) get_irq_desc_data. - commit d4db35e8dc96 ("powerpc/qe_ic: Fix another breakage from the irq_data conversion") used irq_desc_get_chip_data() instead. According to Thomas, the former is the correct direct conversion, but it does look like both should work (arch/powerpc/sysdev/qe_lib/qe_ic.c seems to initialize both to the same thing), and the chip data in some ways is the more logical. Somebody should really decide on one of the other. This merge picks irq_desc_get_handler_data() as the straightforward pure conversion to new names, as per Thomas.
2011-03-30powerpc: qe_ic: Rename get_irq_desc_data and get_irq_desc_chipRichard Cochran
These two functions disappeared in commit 0c6f8a8b917ad361319c8ace3e9f28e69bfdb4c1 "genirq: Remove compat code" but they still exist in qe_ic.h. This patch renames the function to their new names. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Cc: linuxppc-dev@lists.ozlabs.org Cc: Lennert Buytenhek <buytenh@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> LKML-Reference: <20110330132504.GA31832@riccoc20.at.omicron.at> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-30genirq: Remove the now obsolete config options and select statementsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-30powerpc/qe_ic: Fix another breakage from the irq_data conversionBenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>