summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2021-03-03MIPS: lantiq: Explicitly compare LTQ_EBU_PCC_ISTAT against 0Nathan Chancellor
[ Upstream commit c6f2a9e17b9bef7677caddb1626c2402f3e9d2bd ] When building xway_defconfig with clang: arch/mips/lantiq/irq.c:305:48: error: use of logical '&&' with constant operand [-Werror,-Wconstant-logical-operand] if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT) ^ ~~~~~~~~~~~~~~~~~ arch/mips/lantiq/irq.c:305:48: note: use '&' for a bitwise operation if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT) ^~ & arch/mips/lantiq/irq.c:305:48: note: remove constant to silence this warning if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT) ~^~~~~~~~~~~~~~~~~~~~ 1 error generated. Explicitly compare the constant LTQ_EBU_PCC_ISTAT against 0 to fix the warning. Additionally, remove the unnecessary parentheses as this is a simple conditional statement and shorthand '== 0' to '!'. Fixes: 3645da0276ae ("OF: MIPS: lantiq: implement irq_domain support") Link: https://github.com/ClangBuiltLinux/linux/issues/807 Reported-by: Dmitry Golovin <dima@golovin.in> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-03MIPS: c-r4k: Fix section mismatch for loongson2_sc_initNathan Chancellor
[ Upstream commit c58734eee6a2151ba033c0dcb31902c89e310374 ] When building with clang, the following section mismatch warning occurs: WARNING: modpost: vmlinux.o(.text+0x24490): Section mismatch in reference from the function r4k_cache_init() to the function .init.text:loongson2_sc_init() This should have been fixed with commit ad4fddef5f23 ("mips: fix Section mismatch in reference") but it was missed. Remove the improper __init annotation like that commit did. Fixes: 078a55fc824c ("MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code") Link: https://github.com/ClangBuiltLinux/linux/issues/787 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-03ARM: dts: exynos: correct PMIC interrupt trigger level on Arndale OctaKrzysztof Kozlowski
[ Upstream commit 1ac8893c4fa3d4a34915dc5cdab568a39db5086c ] The Samsung PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. The falling edge interrupt will mostly work but it's not correct. Fixes: 1fed2252713e ("ARM: dts: fix pinctrl for s2mps11-irq on exynos5420-arndale-octa") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20201210212903.216728-5-krzk@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-03ARM: dts: exynos: correct PMIC interrupt trigger level on SpringKrzysztof Kozlowski
[ Upstream commit 77e6a5467cb8657cf8b5e610a30a4c502085e4f9 ] The Samsung PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. Without specifying the interrupt type in Devicetree, kernel might apply some fixed configuration, not necessarily working for this hardware. Fixes: 53dd4138bb0a ("ARM: dts: Add exynos5250-spring device tree") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212903.216728-4-krzk@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-03MIPS: vmlinux.lds.S: add missing PAGE_ALIGNED_DATA() sectionAlexander Lobakin
commit 8ac7c87acdcac156670f9920c8acbd84308ff4b1 upstream. MIPS uses its own declaration of rwdata, and thus it should be kept in sync with the asm-generic one. Currently PAGE_ALIGNED_DATA() is missing from the linker script, which emits the following ld warnings: mips-alpine-linux-musl-ld: warning: orphan section `.data..page_aligned' from `arch/mips/kernel/vdso.o' being placed in section `.data..page_aligned' mips-alpine-linux-musl-ld: warning: orphan section `.data..page_aligned' from `arch/mips/vdso/vdso-image.o' being placed in section `.data..page_aligned' Add the necessary declaration, so the mentioned structures will be placed in vmlinux as intended: ffffffff80630580 D __end_once ffffffff80630580 D __start___dyndbg ffffffff80630580 D __start_once ffffffff80630580 D __stop___dyndbg ffffffff80634000 d mips_vdso_data ffffffff80638000 d vdso_data ffffffff80638580 D _gp ffffffff8063c000 T __init_begin ffffffff8063c000 D _edata ffffffff8063c000 T _sinittext -> ffffffff805a4000 D __end_init_task ffffffff805a4000 D __nosave_begin ffffffff805a4000 D __nosave_end ffffffff805a4000 d mips_vdso_data ffffffff805a8000 d vdso_data ffffffff805ac000 D mmlist_lock ffffffff805ac080 D tasklist_lock Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Cc: stable@vger.kernel.org # 4.4+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-23xen/arm: don't ignore return errors from set_phys_to_machineStefano Stabellini
commit 36bf1dfb8b266e089afa9b7b984217f17027bf35 upstream. set_phys_to_machine can fail due to lack of memory, see the kzalloc call in arch/arm/xen/p2m.c:__set_phys_to_machine_multi. Don't ignore the potential return error in set_foreign_p2m_mapping, returning it to the caller instead. This is part of XSA-361. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Cc: stable@vger.kernel.org Reviewed-by: Julien Grall <jgrall@amazon.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-23Xen/x86: also check kernel mapping in set_foreign_p2m_mapping()Jan Beulich
commit b512e1b077e5ccdbd6e225b15d934ab12453b70a upstream. We should not set up further state if either mapping failed; paying attention to just the user mapping's status isn't enough. Also use GNTST_okay instead of implying its value (zero). This is part of XSA-361. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-23Xen/x86: don't bail early from clear_foreign_p2m_mapping()Jan Beulich
commit a35f2ef3b7376bfd0a57f7844bd7454389aae1fc upstream. Its sibling (set_foreign_p2m_mapping()) as well as the sibling of its only caller (gnttab_map_refs()) don't clean up after themselves in case of error. Higher level callers are expected to do so. However, in order for that to really clean up any partially set up state, the operation should not terminate upon encountering an entry in unexpected state. It is particularly relevant to notice here that set_foreign_p2m_mapping() would skip setting up a p2m entry if its grant mapping failed, but it would continue to set up further p2m entries as long as their mappings succeeded. Arguably down the road set_foreign_p2m_mapping() may want its page state related WARN_ON() also converted to an error return. This is part of XSA-361. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-23x86/build: Disable CET instrumentation in the kernel for 32-bit tooBorislav Petkov
commit 256b92af784d5043eeb7d559b6d5963dcc2ecb10 upstream. Commit 20bf2b378729 ("x86/build: Disable CET instrumentation in the kernel") disabled CET instrumentation which gets added by default by the Ubuntu gcc9 and 10 by default, but did that only for 64-bit builds. It would still fail when building a 32-bit target. So disable CET for all x86 builds. Fixes: 20bf2b378729 ("x86/build: Disable CET instrumentation in the kernel") Reported-by: AC <achirvasub@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: AC <achirvasub@gmail.com> Link: https://lkml.kernel.org/r/YCCIgMHkzh/xT4ex@arch-chirva.localdomain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-23h8300: fix PREEMPTION build, TI_PRE_COUNT undefinedRandy Dunlap
[ Upstream commit ade9679c159d5bbe14fb7e59e97daf6062872e2b ] Fix a build error for undefined 'TI_PRE_COUNT' by adding it to asm-offsets.c. h8300-linux-ld: arch/h8300/kernel/entry.o: in function `resume_kernel': (.text+0x29a): undefined reference to `TI_PRE_COUNT' Link: https://lkml.kernel.org/r/20210212021650.22740-1-rdunlap@infradead.org Fixes: df2078b8daa7 ("h8300: Low level entry") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-10x86/apic: Add extra serialization for non-serializing MSRsDave Hansen
commit 25a068b8e9a4eb193d755d58efcb3c98928636e0 upstream. Jan Kiszka reported that the x2apic_wrmsr_fence() function uses a plain MFENCE while the Intel SDM (10.12.3 MSR Access in x2APIC Mode) calls for MFENCE; LFENCE. Short summary: we have special MSRs that have weaker ordering than all the rest. Add fencing consistent with current SDM recommendations. This is not known to cause any issues in practice, only in theory. Longer story below: The reason the kernel uses a different semantic is that the SDM changed (roughly in late 2017). The SDM changed because folks at Intel were auditing all of the recommended fences in the SDM and realized that the x2apic fences were insufficient. Why was the pain MFENCE judged insufficient? WRMSR itself is normally a serializing instruction. No fences are needed because the instruction itself serializes everything. But, there are explicit exceptions for this serializing behavior written into the WRMSR instruction documentation for two classes of MSRs: IA32_TSC_DEADLINE and the X2APIC MSRs. Back to x2apic: WRMSR is *not* serializing in this specific case. But why is MFENCE insufficient? MFENCE makes writes visible, but only affects load/store instructions. WRMSR is unfortunately not a load/store instruction and is unaffected by MFENCE. This means that a non-serializing WRMSR could be reordered by the CPU to execute before the writes made visible by the MFENCE have even occurred in the first place. This means that an x2apic IPI could theoretically be triggered before there is any (visible) data to process. Does this affect anything in practice? I honestly don't know. It seems quite possible that by the time an interrupt gets to consume the (not yet) MFENCE'd data, it has become visible, mostly by accident. To be safe, add the SDM-recommended fences for all x2apic WRMSRs. This also leaves open the question of the _other_ weakly-ordered WRMSR: MSR_IA32_TSC_DEADLINE. While it has the same ordering architecture as the x2APIC MSRs, it seems substantially less likely to be a problem in practice. While writes to the in-memory Local Vector Table (LVT) might theoretically be reordered with respect to a weakly-ordered WRMSR like TSC_DEADLINE, the SDM has this to say: In x2APIC mode, the WRMSR instruction is used to write to the LVT entry. The processor ensures the ordering of this write and any subsequent WRMSR to the deadline; no fencing is required. But, that might still leave xAPIC exposed. The safest thing to do for now is to add the extra, recommended LFENCE. [ bp: Massage commit message, fix typos, drop accidentally added newline to tools/arch/x86/include/asm/barrier.h. ] Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200305174708.F77040DD@viggo.jf.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10x86/build: Disable CET instrumentation in the kernelJosh Poimboeuf
commit 20bf2b378729c4a0366a53e2018a0b70ace94bcd upstream. With retpolines disabled, some configurations of GCC, and specifically the GCC versions 9 and 10 in Ubuntu will add Intel CET instrumentation to the kernel by default. That breaks certain tracing scenarios by adding a superfluous ENDBR64 instruction before the fentry call, for functions which can be called indirectly. CET instrumentation isn't currently necessary in the kernel, as CET is only supported in user space. Disable it unconditionally and move it into the x86's Makefile as CET/CFI... enablement should be a per-arch decision anyway. [ bp: Massage and extend commit message. ] Fixes: 29be86d7f9cb ("kbuild: add -fcf-protection=none when using retpoline flags") Reported-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Cc: <stable@vger.kernel.org> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://lkml.kernel.org/r/20210128215219.6kct3h2eiustncws@treble Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10ARM: footbridge: fix dc21285 PCI configuration accessorsRussell King
commit 39d3454c3513840eb123b3913fda6903e45ce671 upstream. Building with gcc 4.9.2 reveals a latent bug in the PCI accessors for Footbridge platforms, which causes a fatal alignment fault while accessing IO memory. Fix this by making the assembly volatile. Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10ELF/MIPS build fixRalf Baechle
commit f43edca7ed08fc02279f2a62015da5cb6aa0ad61 upstream. CONFIG_MIPS32_N32=y but CONFIG_BINFMT_ELF disabled results in the following linker errors: arch/mips/built-in.o: In function `elf_core_dump': binfmt_elfn32.c:(.text+0x23dbc): undefined reference to `elf_core_extra_phdrs' binfmt_elfn32.c:(.text+0x246e4): undefined reference to `elf_core_extra_data_size' binfmt_elfn32.c:(.text+0x248d0): undefined reference to `elf_core_write_extra_phdrs' binfmt_elfn32.c:(.text+0x24ac4): undefined reference to `elf_core_write_extra_data' CONFIG_MIPS32_O32=y but CONFIG_BINFMT_ELF disabled results in the following linker errors: arch/mips/built-in.o: In function `elf_core_dump': binfmt_elfo32.c:(.text+0x28a04): undefined reference to `elf_core_extra_phdrs' binfmt_elfo32.c:(.text+0x29330): undefined reference to `elf_core_extra_data_size' binfmt_elfo32.c:(.text+0x2951c): undefined reference to `elf_core_write_extra_phdrs' binfmt_elfo32.c:(.text+0x29710): undefined reference to `elf_core_write_extra_data' This is because binfmt_elfn32 and binfmt_elfo32 are using symbols from elfcore but for these configurations elfcore will not be built. Fixed by making elfcore selectable by a separate config symbol which unlike the current mechanism can also be used from other directories than kernel/, then having each flavor of ELF that relies on elfcore.o, select it in Kconfig, including CONFIG_MIPS32_N32 and CONFIG_MIPS32_O32 which fixes this issue. Link: http://lkml.kernel.org/r/20160520141705.GA1913@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03ARM: imx: build suspend-imx6.S with arm instruction setMax Krummenacher
commit a88afa46b86ff461c89cc33fc3a45267fff053e8 upstream. When the kernel is configured to use the Thumb-2 instruction set "suspend-to-memory" fails to resume. Observed on a Colibri iMX6ULL (i.MX 6ULL) and Apalis iMX6 (i.MX 6Q). It looks like the CPU resumes unconditionally in ARM instruction mode and then chokes on the presented Thumb-2 code it should execute. Fix this by using the arm instruction set for all code in suspend-imx6.S. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Fixes: df595746fa69 ("ARM: imx: add suspend in ocram support for i.mx6q") Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03KVM: x86/pmu: Fix HW_REF_CPU_CYCLES event pseudo-encoding in intel_arch_events[]Like Xu
commit 98dd2f108e448988d91e296173e773b06fb978b8 upstream. The HW_REF_CPU_CYCLES event on the fixed counter 2 is pseudo-encoded as 0x0300 in the intel_perfmon_event_map[]. Correct its usage. Fixes: 62079d8a4312 ("KVM: PMU: add proper support for fixed counter 2") Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20201230081916.63417-1-like.xu@linux.intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30x86/boot/compressed: Disable relocation relaxationArvind Sankar
commit 09e43968db40c33a73e9ddbfd937f46d5c334924 upstream. The x86-64 psABI [0] specifies special relocation types (R_X86_64_[REX_]GOTPCRELX) for indirection through the Global Offset Table, semantically equivalent to R_X86_64_GOTPCREL, which the linker can take advantage of for optimization (relaxation) at link time. This is supported by LLD and binutils versions 2.26 onwards. The compressed kernel is position-independent code, however, when using LLD or binutils versions before 2.27, it must be linked without the -pie option. In this case, the linker may optimize certain instructions into a non-position-independent form, by converting foo@GOTPCREL(%rip) to $foo. This potential issue has been present with LLD and binutils-2.26 for a long time, but it has never manifested itself before now: - LLD and binutils-2.26 only relax movq foo@GOTPCREL(%rip), %reg to leaq foo(%rip), %reg which is still position-independent, rather than mov $foo, %reg which is permitted by the psABI when -pie is not enabled. - GCC happens to only generate GOTPCREL relocations on mov instructions. - CLang does generate GOTPCREL relocations on non-mov instructions, but when building the compressed kernel, it uses its integrated assembler (due to the redefinition of KBUILD_CFLAGS dropping -no-integrated-as), which has so far defaulted to not generating the GOTPCRELX relocations. Nick Desaulniers reports [1,2]: "A recent change [3] to a default value of configuration variable (ENABLE_X86_RELAX_RELOCATIONS OFF -> ON) in LLVM now causes Clang's integrated assembler to emit R_X86_64_GOTPCRELX/R_X86_64_REX_GOTPCRELX relocations. LLD will relax instructions with these relocations based on whether the image is being linked as position independent or not. When not, then LLD will relax these instructions to use absolute addressing mode (R_RELAX_GOT_PC_NOPIC). This causes kernels built with Clang and linked with LLD to fail to boot." Patch series [4] is a solution to allow the compressed kernel to be linked with -pie unconditionally, but even if merged is unlikely to be backported. As a simple solution that can be applied to stable as well, prevent the assembler from generating the relaxed relocation types using the -mrelax-relocations=no option. For ease of backporting, do this unconditionally. [0] https://gitlab.com/x86-psABIs/x86-64-ABI/-/blob/master/x86-64-ABI/linker-optimization.tex#L65 [1] https://lore.kernel.org/lkml/20200807194100.3570838-1-ndesaulniers@google.com/ [2] https://github.com/ClangBuiltLinux/linux/issues/1121 [3] https://reviews.llvm.org/rGc41a18cf61790fc898dcda1055c3efbf442c14c0 [4] https://lore.kernel.org/lkml/20200731202738.2577854-1-nivedita@alum.mit.edu/ Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200812004308.1448603-1-nivedita@alum.mit.edu [nc: Backport to 4.4] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30sh: dma: fix kconfig dependency for G2_DMANecip Fazil Yildiran
commit f477a538c14d07f8c45e554c8c5208d588514e98 upstream. When G2_DMA is enabled and SH_DMA is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for SH_DMA_API Depends on [n]: SH_DMA [=n] Selected by [y]: - G2_DMA [=y] && SH_DREAMCAST [=y] The reason is that G2_DMA selects SH_DMA_API without depending on or selecting SH_DMA while SH_DMA_API depends on SH_DMA. When G2_DMA was first introduced with commit 40f49e7ed77f ("sh: dma: Make G2 DMA configurable."), this wasn't an issue since SH_DMA_API didn't have such dependency, and this way was the only way to enable it since SH_DMA_API was non-visible. However, later SH_DMA_API was made visible and dependent on SH_DMA with commit d8902adcc1a9 ("dmaengine: sh: Add Support SuperH DMA Engine driver"). Let G2_DMA depend on SH_DMA_API instead to avoid Kbuild issues. Fixes: d8902adcc1a9 ("dmaengine: sh: Add Support SuperH DMA Engine driver") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Signed-off-by: Rich Felker <dalias@libc.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23ARM: picoxcell: fix missing interrupt-parent propertiesArnd Bergmann
[ Upstream commit bac717171971176b78c72d15a8b6961764ab197f ] dtc points out that the interrupts for some devices are not parsable: picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent There are two VIC instances, so it's not clear which one needs to be used. I found the BSP sources that reference VIC0, so use that: https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch Acked-by: Jamie Iles <jamie@jamieiles.com> Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-23arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARCRandy Dunlap
[ Upstream commit 8a48c0a3360bf2bf4f40c980d0ec216e770e58ee ] fs/dax.c uses copy_user_page() but ARC does not provide that interface, resulting in a build error. Provide copy_user_page() in <asm/page.h>. ../fs/dax.c: In function 'copy_cow_page_dax': ../fs/dax.c:702:2: error: implicit declaration of function 'copy_user_page'; did you mean 'copy_to_user_page'? [-Werror=implicit-function-declaration] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: Dan Williams <dan.j.williams@intel.com> #Acked-by: Vineet Gupta <vgupta@synopsys.com> # v1 Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: linux-fsdevel@vger.kernel.org Cc: linux-nvdimm@lists.01.org #Reviewed-by: Ira Weiny <ira.weiny@intel.com> # v2 Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-23ARC: build: add boot_targets to PHONYMasahiro Yamada
[ Upstream commit 0cfccb3c04934cdef42ae26042139f16e805b5f7 ] The top-level boot_targets (uImage and uImage.*) should be phony targets. They just let Kbuild descend into arch/arc/boot/ and create files there. If a file exists in the top directory with the same name, the boot image will not be created. You can confirm it by the following steps: $ export CROSS_COMPILE=<your-arc-compiler-prefix> $ make -s ARCH=arc defconfig all # vmlinux will be built $ touch uImage.gz $ make ARCH=arc uImage.gz CALL scripts/atomic/check-atomics.sh CALL scripts/checksyscalls.sh CHK include/generated/compile.h # arch/arc/boot/uImage.gz is not created Specify the targets as PHONY to fix this. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17powerpc: Fix incorrect stw{, ux, u, x} instructions in __set_pte_atMathieu Desnoyers
[ Upstream commit d85be8a49e733dcd23674aa6202870d54bf5600d ] The placeholder for instruction selection should use the second argument's operand, which is %1, not %0. This could generate incorrect assembly code if the memory addressing of operand %0 is a different form from that of operand %1. Also remove the %Un placeholder because having %Un placeholders for two operands which are based on the same local var (ptep) doesn't make much sense. By the way, it doesn't change the current behaviour because "<>" constraint is missing for the associated "=m". [chleroy: revised commit log iaw segher's comments and removed %U0] Fixes: 9bf2b5cdc5fe ("powerpc: Fixes for CONFIG_PTE_64BIT for SMP support") Cc: <stable@vger.kernel.org> # v2.6.28+ Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/96354bd77977a6a933fe9020da57629007fdb920.1603358942.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-12x86/mtrr: Correct the range check before performing MTRR type lookupsYing-Tsun Huang
commit cb7f4a8b1fb426a175d1708f05581939c61329d4 upstream. In mtrr_type_lookup(), if the input memory address region is not in the MTRR, over 4GB, and not over the top of memory, a write-back attribute is returned. These condition checks are for ensuring the input memory address region is actually mapped to the physical memory. However, if the end address is just aligned with the top of memory, the condition check treats the address is over the top of memory, and write-back attribute is not returned. And this hits in a real use case with NVDIMM: the nd_pmem module tries to map NVDIMMs as cacheable memories when NVDIMMs are connected. If a NVDIMM is the last of the DIMMs, the performance of this NVDIMM becomes very low since it is aligned with the top of memory and its memory type is uncached-minus. Move the input end address change to inclusive up into mtrr_type_lookup(), before checking for the top of memory in either mtrr_type_lookup_{variable,fixed}() helpers. [ bp: Massage commit message. ] Fixes: 0cc705f56e40 ("x86/mm/mtrr: Clean up mtrr_type_lookup()") Signed-off-by: Ying-Tsun Huang <ying-tsun.huang@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201215070721.4349-1-ying-tsun.huang@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12x86/mm: Fix leak of pmd ptlockDan Williams
commit d1c5246e08eb64991001d97a3bd119c93edbc79a upstream. Commit 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") introduced a new location where a pmd was released, but neglected to run the pmd page destructor. In fact, this happened previously for a different pmd release path and was fixed by commit: c283610e44ec ("x86, mm: do not leak page->ptl for pmd page tables"). This issue was hidden until recently because the failure mode is silent, but commit: b2b29d6d0119 ("mm: account PMD tables like PTE tables") turns the failure mode into this signature: BUG: Bad page state in process lt-pmem-ns pfn:15943d page:000000007262ed7b refcount:0 mapcount:-1024 mapping:0000000000000000 index:0x0 pfn:0x15943d flags: 0xaffff800000000() raw: 00affff800000000 dead000000000100 0000000000000000 0000000000000000 raw: 0000000000000000 ffff913a029bcc08 00000000fffffbff 0000000000000000 page dumped because: nonzero mapcount [..] dump_stack+0x8b/0xb0 bad_page.cold+0x63/0x94 free_pcp_prepare+0x224/0x270 free_unref_page+0x18/0xd0 pud_free_pmd_page+0x146/0x160 ioremap_pud_range+0xe3/0x350 ioremap_page_range+0x108/0x160 __ioremap_caller.constprop.0+0x174/0x2b0 ? memremap+0x7a/0x110 memremap+0x7a/0x110 devm_memremap+0x53/0xa0 pmem_attach_disk+0x4ed/0x530 [nd_pmem] ? __devm_release_region+0x52/0x80 nvdimm_bus_probe+0x85/0x210 [libnvdimm] Given this is a repeat occurrence it seemed prudent to look for other places where this destructor might be missing and whether a better helper is needed. try_to_free_pmd_page() looks like a candidate, but testing with setting up and tearing down pmd mappings via the dax unit tests is thus far not triggering the failure. As for a better helper pmd_free() is close, but it is a messy fit due to requiring an @mm arg. Also, ___pmd_free_tlb() wants to call paravirt_tlb_remove_table() instead of free_page(), so open-coded pgtable_pmd_page_dtor() seems the best way forward for now. Debugged together with Matthew Wilcox <willy@infradead.org>. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Yi Zhang <yi.zhang@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/160697689204.605323.17629854984697045602.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-09powerpc: sysdev: add missing iounmap() on error in mpic_msgr_probe()Qinglang Miao
[ Upstream commit ffa1797040c5da391859a9556be7b735acbe1242 ] I noticed that iounmap() of msgr_block_addr before return from mpic_msgr_probe() in the error handling case is missing. So use devm_ioremap() instead of just ioremap() when remapping the message register block, so the mapping will be automatically released on probe failure. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201028091551.136400-1-miaoqinglang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29powerpc/perf: Exclude kernel samples while counting events in user space.Athira Rajeev
commit aa8e21c053d72b6639ea5a7f1d3a1d0209534c94 upstream. Perf event attritube supports exclude_kernel flag to avoid sampling/profiling in supervisor state (kernel). Based on this event attr flag, Monitor Mode Control Register bit is set to freeze on supervisor state. But sometimes (due to hardware limitation), Sampled Instruction Address Register (SIAR) locks on to kernel address even when freeze on supervisor is set. Patch here adds a check to drop those samples. Cc: stable@vger.kernel.org Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1606289215-1433-1-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-29um: chan_xterm: Fix fd leakAnton Ivanov
[ Upstream commit 9431f7c199ab0d02da1482d62255e0b4621cb1b5 ] xterm serial channel was leaking a fd used in setting up the port helper This bug is prehistoric - it predates switching to git. The "fixes" header here is really just to mark all the versions we would like this to apply to which is "Anything from the Cretaceous period onwards". No dinosaurs were harmed in fixing this bug. Fixes: b40997b872cd ("um: drivers/xterm.c: fix a file descriptor leak") Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29x86/kprobes: Restore BTF if the single-stepping is cancelledMasami Hiramatsu
[ Upstream commit 78ff2733ff352175eb7f4418a34654346e1b6cd2 ] Fix to restore BTF if single-stepping causes a page fault and it is cancelled. Usually the BTF flag was restored when the single stepping is done (in resume_execution()). However, if a page fault happens on the single stepping instruction, the fault handler is invoked and the single stepping is cancelled. Thus, the BTF flag is not restored. Fixes: 1ecc798c6764 ("x86: debugctlmsr kprobes") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/160389546985.106936.12727996109376240993.stgit@devnote2 Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29powerpc/pseries/hibernation: drop pseries_suspend_begin() from suspend opsNathan Lynch
[ Upstream commit 52719fce3f4c7a8ac9eaa191e8d75a697f9fbcbc ] There are three ways pseries_suspend_begin() can be reached: 1. When "mem" is written to /sys/power/state: kobj_attr_store() -> state_store() -> pm_suspend() -> suspend_devices_and_enter() -> pseries_suspend_begin() This never works because there is no way to supply a valid stream id using this interface, and H_VASI_STATE is called with a stream id of zero. So this call path is useless at best. 2. When a stream id is written to /sys/devices/system/power/hibernate. pseries_suspend_begin() is polled directly from store_hibernate() until the stream is in the "Suspending" state (i.e. the platform is ready for the OS to suspend execution): dev_attr_store() -> store_hibernate() -> pseries_suspend_begin() 3. When a stream id is written to /sys/devices/system/power/hibernate (continued). After #2, pseries_suspend_begin() is called once again from the pm core: dev_attr_store() -> store_hibernate() -> pm_suspend() -> suspend_devices_and_enter() -> pseries_suspend_begin() This is redundant because the VASI suspend state is already known to be Suspending. The begin() callback of platform_suspend_ops is optional, so we can simply remove that assignment with no loss of function. Fixes: 32d8ad4e621d ("powerpc/pseries: Partition hibernation support") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201207215200.1785968-18-nathanl@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29ARM: dts: at91: sama5d3_xplained: add pincontrol for USB HostCristian Birsan
[ Upstream commit e1062fa7292f1e3744db0a487c4ac0109e09b03d ] The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without it the driver probes but VBus is not powered because of wrong pincontrol configuration. Fixes: b7c2b61570798 ("ARM: at91: add Atmel's SAMA5D3 Xplained board") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201118120019.1257580-4-cristian.birsan@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29ARM: dts: at91: sama5d4_xplained: add pincontrol for USB HostCristian Birsan
[ Upstream commit be4dd2d448816a27c1446f8f37fce375daf64148 ] The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without it the driver probes but VBus is not powered because of wrong pincontrol configuration. Fixes: 38153a017896f ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201118120019.1257580-3-cristian.birsan@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32Christophe Leroy
[ Upstream commit 78665179e569c7e1fe102fb6c21d0f5b6951f084 ] On 8xx, we get the following features: [ 0.000000] cpu_features = 0x0000000000000100 [ 0.000000] possible = 0x0000000000000120 [ 0.000000] always = 0x0000000000000000 This is not correct. As CONFIG_PPC_8xx is mutually exclusive with all other configurations, the three lines should be equal. The problem is due to CPU_FTRS_GENERIC_32 which is taken when CONFIG_BOOK3S_32 is NOT selected. This CPU_FTRS_GENERIC_32 is pointless because there is no generic configuration supporting all 32 bits but book3s/32. Remove this pointless generic features definition to unbreak the calculation of 'possible' features and 'always' features. Fixes: 76bc080ef5a3 ("[POWERPC] Make default cputable entries reflect selected CPU family") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/76a85f30bf981d1aeaae00df99321235494da254.1604426550.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMANecip Fazil Yildiran
[ Upstream commit 3a5fe2fb9635c43359c9729352f45044f3c8df6b ] When BCM47XX_BCMA is enabled and BCMA_DRIVER_PCI is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for BCMA_DRIVER_PCI_HOSTMODE Depends on [n]: MIPS [=y] && BCMA_DRIVER_PCI [=n] && PCI_DRIVERS_LEGACY [=y] && BCMA [=y]=y Selected by [y]: - BCM47XX_BCMA [=y] && BCM47XX [=y] && PCI [=y] The reason is that BCM47XX_BCMA selects BCMA_DRIVER_PCI_HOSTMODE without depending on or selecting BCMA_DRIVER_PCI while BCMA_DRIVER_PCI_HOSTMODE depends on BCMA_DRIVER_PCI. This can also fail building the kernel. Honor the kconfig dependency to remove unmet direct dependency warnings and avoid any potential build failures. Fixes: c1d1c5d4213e ("bcm47xx: add support for bcma bus") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209879 Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29ARM: p2v: fix handling of LPAE translation in BE modeArd Biesheuvel
[ Upstream commit 4e79f0211b473f8e1eab8211a9fd50cc41a3a061 ] When running in BE mode on LPAE hardware with a PA-to-VA translation that exceeds 4 GB, we patch bits 39:32 of the offset into the wrong byte of the opcode. So fix that, by rotating the offset in r0 to the right by 8 bits, which will put the 8-bit immediate in bits 31:24. Note that this will also move bit #22 in its correct place when applying the rotation to the constant #0x400000. Fixes: d9a790df8e984 ("ARM: 7883/1: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE") Acked-by: Nicolas Pitre <nico@fluxnic.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29ARC: stack unwinding: don't assume non-current task is sleepingVineet Gupta
[ Upstream commit e42404fa10fd11fe72d0a0e149a321d10e577715 ] To start stack unwinding (SP, PC and BLINK) are needed. When the explicit execution context (pt_regs etc) is not available, unwinder assumes the task is sleeping (in __switch_to()) and fetches SP and BLINK from kernel mode stack. But this assumption is not true, specially in a SMP system, when top runs on 1 core, there may be active running processes on all cores. So when unwinding non courrent tasks, ensure they are NOT running. And while at it, handle the self unwinding case explicitly. This came out of investigation of a customer reported hang with rcutorture+top Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/31 Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-11x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytesMasami Hiramatsu
commit 4e9a5ae8df5b3365183150f6df49e49dece80d8c upstream Since insn.prefixes.nbytes can be bigger than the size of insn.prefixes.bytes[] when a prefix is repeated, the proper check must be insn.prefixes.bytes[i] != 0 and i < 4 instead of using insn.prefixes.nbytes. Introduce a for_each_insn_prefix() macro for this purpose. Debugged by Kees Cook <keescook@chromium.org>. [ bp: Massage commit message, sync with the respective header in tools/ and drop "we". ] Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints") Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2 [sudip: adjust context, drop change of insn.h in tools] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11arm64: assembler: make adr_l work in modules under KASLRArd Biesheuvel
commit 41c066f2c4d436c535616fe182331766c57838f0 upstream When CONFIG_RANDOMIZE_MODULE_REGION_FULL=y, the offset between loaded modules and the core kernel may exceed 4 GB, putting symbols exported by the core kernel out of the reach of the ordinary adrp/add instruction pairs used to generate relative symbol references. So make the adr_l macro emit a movz/movk sequence instead when executing in module context. While at it, remove the pointless special case for the stack pointer. Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> [ dannf: backported to v4.4 by replacing the 3-arg adr_l macro in head.S with it's output, as this commit drops the 3-arg variant ] Fixes: c042dd600f4e ("crypto: arm64/sha - avoid non-standard inline asm tricks") Signed-off-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11powerpc: Stop exporting __clear_user which is now inlined.Michal Suchanek
Stable commit 452e2a83ea23 ("powerpc: Fix __clear_user() with KUAP enabled") redefines __clear_user as inline function but does not remove the export. Fixes: 452e2a83ea23 ("powerpc: Fix __clear_user() with KUAP enabled") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2020-12-02x86/speculation: Fix prctl() when spectre_v2_user={seccomp,prctl},ibpbAnand K Mistry
commit 33fc379df76b4991e5ae312f07bcd6820811971e upstream. When spectre_v2_user={seccomp,prctl},ibpb is specified on the command line, IBPB is force-enabled and STIPB is conditionally-enabled (or not available). However, since 21998a351512 ("x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.") the spectre_v2_user_ibpb variable is set to SPECTRE_V2_USER_{PRCTL,SECCOMP} instead of SPECTRE_V2_USER_STRICT, which is the actual behaviour. Because the issuing of IBPB relies on the switch_mm_*_ibpb static branches, the mitigations behave as expected. Since 1978b3a53a74 ("x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP") this discrepency caused the misreporting of IB speculation via prctl(). On CPUs with STIBP always-on and spectre_v2_user=seccomp,ibpb, prctl(PR_GET_SPECULATION_CTRL) would return PR_SPEC_PRCTL | PR_SPEC_ENABLE instead of PR_SPEC_DISABLE since both IBPB and STIPB are always on. It also allowed prctl(PR_SET_SPECULATION_CTRL) to set the IB speculation mode, even though the flag is ignored. Similarly, for CPUs without SMT, prctl(PR_GET_SPECULATION_CTRL) should also return PR_SPEC_DISABLE since IBPB is always on and STIBP is not available. [ bp: Massage commit message. ] Fixes: 21998a351512 ("x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.") Fixes: 1978b3a53a74 ("x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP") Signed-off-by: Anand K Mistry <amistry@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201110123349.1.Id0cbf996d2151f4c143c90f9028651a5b49a5908@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-02x86/xen: don't unbind uninitialized lock_kicker_irqBrian Masney
[ Upstream commit 65cae18882f943215d0505ddc7e70495877308e6 ] When booting a hyperthreaded system with the kernel parameter 'mitigations=auto,nosmt', the following warning occurs: WARNING: CPU: 0 PID: 1 at drivers/xen/events/events_base.c:1112 unbind_from_irqhandler+0x4e/0x60 ... Hardware name: Xen HVM domU, BIOS 4.2.amazon 08/24/2006 ... Call Trace: xen_uninit_lock_cpu+0x28/0x62 xen_hvm_cpu_die+0x21/0x30 takedown_cpu+0x9c/0xe0 ? trace_suspend_resume+0x60/0x60 cpuhp_invoke_callback+0x9a/0x530 _cpu_up+0x11a/0x130 cpu_up+0x7e/0xc0 bringup_nonboot_cpus+0x48/0x50 smp_init+0x26/0x79 kernel_init_freeable+0xea/0x229 ? rest_init+0xaa/0xaa kernel_init+0xa/0x106 ret_from_fork+0x35/0x40 The secondary CPUs are not activated with the nosmt mitigations and only the primary thread on each CPU core is used. In this situation, xen_hvm_smp_prepare_cpus(), and more importantly xen_init_lock_cpu(), is not called, so the lock_kicker_irq is not initialized for the secondary CPUs. Let's fix this by exiting early in xen_uninit_lock_cpu() if the irq is not set to avoid the warning from above for each secondary CPU. Signed-off-by: Brian Masney <bmasney@redhat.com> Link: https://lore.kernel.org/r/20201107011119.631442-1-bmasney@redhat.com Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-24x86/microcode/intel: Check patch signature before saving microcode for early ↵Chen Yu
loading commit 1a371e67dc77125736cc56d3a0893f06b75855b6 upstream. Currently, scan_microcode() leverages microcode_matches() to check if the microcode matches the CPU by comparing the family and model. However, the processor stepping and flags of the microcode signature should also be considered when saving a microcode patch for early update. Use find_matching_signature() in scan_microcode() and get rid of the now-unused microcode_matches() which is a good cleanup in itself. Complete the verification of the patch being saved for early loading in save_microcode_patch() directly. This needs to be done there too because save_mc_for_early() will call save_microcode_patch() too. The second reason why this needs to be done is because the loader still tries to support, at least hypothetically, mixed-steppings systems and thus adds all patches to the cache that belong to the same CPU model albeit with different steppings. For example: microcode: CPU: sig=0x906ec, pf=0x2, rev=0xd6 microcode: mc_saved[0]: sig=0x906e9, pf=0x2a, rev=0xd6, total size=0x19400, date = 2020-04-23 microcode: mc_saved[1]: sig=0x906ea, pf=0x22, rev=0xd6, total size=0x19000, date = 2020-04-27 microcode: mc_saved[2]: sig=0x906eb, pf=0x2, rev=0xd6, total size=0x19400, date = 2020-04-23 microcode: mc_saved[3]: sig=0x906ec, pf=0x22, rev=0xd6, total size=0x19000, date = 2020-04-27 microcode: mc_saved[4]: sig=0x906ed, pf=0x22, rev=0xd6, total size=0x19400, date = 2020-04-23 The patch which is being saved for early loading, however, can only be the one which fits the CPU this runs on so do the signature verification before saving. [ bp: Do signature verification in save_microcode_patch() and rewrite commit message. ] Fixes: ec400ddeff20 ("x86/microcode_intel_early.c: Early update ucode on Intel's CPU") Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=208535 Link: https://lkml.kernel.org/r/20201113015923.13960-1-yu.c.chen@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24s390/cpum_sf.c: fix file permission for cpum_sfb_sizeThomas Richter
commit 78d732e1f326f74f240d416af9484928303d9951 upstream. This file is installed by the s390 CPU Measurement sampling facility device driver to export supported minimum and maximum sample buffer sizes. This file is read by lscpumf tool to display the details of the device driver capabilities. The lscpumf tool might be invoked by a non-root user. In this case it does not print anything because the file contents can not be read. Fix this by allowing read access for all users. Reading the file contents is ok, changing the file contents is left to the root user only. For further reference and details see: [1] https://github.com/ibm-s390-tools/s390-tools/issues/97 Fixes: 69f239ed335a ("s390/cpum_sf: Dynamically extend the sampling buffer if overflows occur") Cc: <stable@vger.kernel.org> # 3.14 Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24xtensa: disable preemption around cache alias management callsMax Filippov
commit 3a860d165eb5f4d7cf0bf81ef6a5b5c5e1754422 upstream. Although cache alias management calls set up and tear down TLB entries and fast_second_level_miss is able to restore TLB entry should it be evicted they absolutely cannot preempt each other because they use the same TLBTEMP area for different purposes. Disable preemption around all cache alias management calls to enforce that. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24powerpc/uaccess-flush: fix corenet64_smp_defconfig buildDaniel Axtens
Gunter reports problems with the corenet64_smp_defconfig: In file included from arch/powerpc/kernel/ppc_ksyms.c:10:0: arch/powerpc/include/asm/book3s/64/kup-radix.h:11:29: error: redefinition of ‘allow_user_access’ static __always_inline void allow_user_access(void __user *to, const void __user *from, ^~~~~~~~~~~~~~~~~ In file included from arch/powerpc/include/asm/uaccess.h:12:0, from arch/powerpc/kernel/ppc_ksyms.c:8: arch/powerpc/include/asm/kup.h:12:20: note: previous definition of ‘allow_user_access’ was here static inline void allow_user_access(void __user *to, const void __user *from, ^~~~~~~~~~~~~~~~~ This is because ppc_ksyms.c imports asm/book3s/64/kup-radix.h guarded by CONFIG_PPC64, rather than CONFIG_PPC_BOOK3S_64 which it should do. Fix it. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24MIPS: Alchemy: Fix memleak in alchemy_clk_setup_cpuZhang Qilong
[ Upstream commit ac3b57adf87ad9bac7e33ca26bbbb13fae1ed62b ] If the clk_register fails, we should free h before function returns to prevent memleak. Fixes: 474402291a0ad ("MIPS: Alchemy: clock framework integration of onchip clocks") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-24ARM: dts: imx50-evk: Fix the chip select 1 IOMUXFabio Estevam
[ Upstream commit 33d0d843872c5ddbe28457a92fc6f2487315fb9f ] The SPI chip selects are represented as: cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>; , which means that they are used in GPIO function instead of native SPI mode. Fix the IOMUX for the chip select 1 to use GPIO4_13 instead of the native CSPI_SSI function. Fixes: c605cbf5e135 ("ARM: dts: imx: add device tree support for Freescale imx50evk board") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-24arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phySergey Matyukevich
[ Upstream commit 7dd8f0ba88fce98e2953267a66af74c6f4792a56 ] Commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") fixed micrel phy driver adding proper support for phy modes. Adapt imx6q-udoo board phy settings : explicitly set required delay configuration using "rgmii-id". Fixes: cbd54fe0b2bc ("ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo") Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-24MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPSPaul Burton
[ Upstream commit 1eefcbc89cf3a8e252e5aeb25825594699b47360 ] When the kernel is built for microMIPS, branches targets need to be known to be microMIPS code in order to result in bit 0 of the PC being set. The branch target in the BUILD_ROLLBACK_PROLOGUE macro was simply the end of the macro, which may be pointing at padding rather than at code. This results in recent enough GNU linkers complaining like so: mips-img-linux-gnu-ld: arch/mips/built-in.o: .text+0x3e3c: Unsupported branch between ISA modes. mips-img-linux-gnu-ld: final link failed: Bad value Makefile:936: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Fix this by changing the branch target to be the start of the appropriate handler, skipping over any padding. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14019/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-24arm64: psci: Avoid printing in cpu_psci_cpu_die()Will Deacon
[ Upstream commit 891deb87585017d526b67b59c15d38755b900fea ] cpu_psci_cpu_die() is called in the context of the dying CPU, which will no longer be online or tracked by RCU. It is therefore not generally safe to call printk() if the PSCI "cpu off" request fails, so remove the pr_crit() invocation. Cc: Qian Cai <cai@redhat.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20201106103602.9849-2-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-22KVM: x86: clflushopt should be treated as a no-op by emulationDavid Edmondson
commit 51b958e5aeb1e18c00332e0b37c5d4e95a3eff84 upstream. The instruction emulator ignores clflush instructions, yet fails to support clflushopt. Treat both similarly. Fixes: 13e457e0eebf ("KVM: x86: Emulator does not decode clflush well") Signed-off-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <20201103120400.240882-1-david.edmondson@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 21:58:43 +0000