Age | Commit message (Collapse) | Author |
|
This option is reverted in change Iebcb0cd9982f36c4bd2552811f9147325a291db0.
Bug: 71728490
Change-Id: If25dfd56abed16bfe579840e4a52d6bedbae69ca
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
Changes in 4.4.170
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
xhci: Don't prevent USB2 bus suspend in state check intended for USB3 only
USB: serial: option: add GosunCn ZTE WeLink ME3630
USB: serial: option: add HP lt4132
USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode)
USB: serial: option: add Fibocom NL668 series
USB: serial: option: add Telit LN940 series
mmc: core: Reset HPI enabled state during re-init and in case of errors
mmc: omap_hsmmc: fix DMA API warning
gpio: max7301: fix driver for use with CONFIG_VMAP_STACK
Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels
x86/mtrr: Don't copy uninitialized gentry fields back to userspace
drm/ioctl: Fix Spectre v1 vulnerabilities
ip6mr: Fix potential Spectre v1 vulnerability
ipv4: Fix potential Spectre v1 vulnerability
ax25: fix a use-after-free in ax25_fillin_cb()
ibmveth: fix DMA unmap error in ibmveth_xmit_start error path
ieee802154: lowpan_header_create check must check daddr
ipv6: explicitly initialize udp6_addr in udp_sock_create6()
isdn: fix kernel-infoleak in capi_unlocked_ioctl
netrom: fix locking in nr_find_socket()
packet: validate address length
packet: validate address length if non-zero
sctp: initialize sin6_flowinfo for ipv6 addrs in sctp_inet6addr_event
vhost: make sure used idx is seen before log in vhost_add_used_n()
VSOCK: Send reset control packet when socket is partially bound
xen/netfront: tolerate frags with no data
gro_cell: add napi_disable in gro_cells_destroy
sock: Make sock->sk_stamp thread-safe
ALSA: rme9652: Fix potential Spectre v1 vulnerability
ALSA: emu10k1: Fix potential Spectre v1 vulnerabilities
ALSA: pcm: Fix potential Spectre v1 vulnerability
ALSA: emux: Fix potential Spectre v1 vulnerabilities
ALSA: hda: add mute LED support for HP EliteBook 840 G4
ALSA: hda/tegra: clear pending irq handlers
USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays
USB: serial: option: add Fibocom NL678 series
usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable()
Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G
KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixup
perf pmu: Suppress potential format-truncation warning
ext4: fix possible use after free in ext4_quota_enable
ext4: missing unlock/put_page() in ext4_try_to_write_inline_data()
ext4: fix EXT4_IOC_GROUP_ADD ioctl
ext4: force inode writes when nfsd calls commit_metadata()
spi: bcm2835: Fix race on DMA termination
spi: bcm2835: Fix book-keeping of DMA termination
spi: bcm2835: Avoid finishing transfer prematurely in IRQ mode
cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader.
media: vivid: free bitmap_cap when updating std/timings/etc.
MIPS: Ensure pmd_present() returns false after pmd_mknotpresent()
MIPS: Align kernel load address to 64KB
CIFS: Fix error mapping for SMB2_LOCK command which caused OFD lock problem
x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested
spi: bcm2835: Unbreak the build of esoteric configs
powerpc: Fix COFF zImage booting on old powermacs
ARM: imx: update the cpu power up timing setting on i.mx6sx
Input: restore EV_ABS ABS_RESERVED
checkstack.pl: fix for aarch64
xfrm: Fix bucket count reported to userspace
scsi: bnx2fc: Fix NULL dereference in error handling
Input: omap-keypad - fix idle configuration to not block SoC idle states
scsi: zfcp: fix posting too many status read buffers leading to adapter shutdown
fork: record start_time late
hwpoison, memory_hotplug: allow hwpoisoned pages to be offlined
mm, devm_memremap_pages: mark devm_memremap_pages() EXPORT_SYMBOL_GPL
mm, devm_memremap_pages: kill mapping "System RAM" support
sunrpc: fix cache_head leak due to queued request
sunrpc: use SVC_NET() in svcauth_gss_* functions
crypto: x86/chacha20 - avoid sleeping with preemption disabled
ALSA: cs46xx: Potential NULL dereference in probe
ALSA: usb-audio: Avoid access before bLength check in build_audio_procunit()
ALSA: usb-audio: Fix an out-of-bound read in create_composite_quirks
dlm: fixed memory leaks after failed ls_remove_names allocation
dlm: possible memory leak on error path in create_lkb()
dlm: lost put_lkb on error path in receive_convert() and receive_unlock()
dlm: memory leaks on error path in dlm_user_request()
gfs2: Fix loop in gfs2_rbm_find
b43: Fix error in cordic routine
9p/net: put a lower bound on msize
iommu/vt-d: Handle domain agaw being less than iommu agaw
ceph: don't update importing cap's mseq when handing cap export
genwqe: Fix size check
intel_th: msu: Fix an off-by-one in attribute store
power: supply: olpc_battery: correct the temperature units
Linux 4.4.170
Change-Id: I1b2927583f8853bfeb3ad11d045c2cf5c5c926f3
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
In chacha20-simd, clear the MAY_SLEEP flag in the blkcipher_desc to
prevent sleeping with preemption disabled, under kernel_fpu_begin().
This was fixed upstream incidentally by a large refactoring,
commit 9ae433bc79f9 ("crypto: chacha20 - convert generic and x86
versions to skcipher"). But syzkaller easily trips over this when
running on older kernels, as it's easily reachable via AF_ALG.
Therefore, this patch makes the minimal fix for older kernels.
Fixes: c9320b6dcb89 ("crypto: chacha20 - Add a SSSE3 SIMD variant for x86_64")
Cc: linux-crypto@vger.kernel.org
Cc: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1e434b703248580b7aaaf8a115d93e682f57d29f ]
The sw2iso count should cover ARM LDO ramp-up time,
the MAX ARM LDO ramp-up time may be up to more than
100us on some boards, this patch sets sw2iso to 0xf
(~384us) which is the reset value, and it is much
more safe to cover different boards, since we have
observed that some customer boards failed with current
setting of 0x2.
Fixes: 05136f0897b5 ("ARM: imx: support arm power off in cpuidle for i.mx6sx")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5564597d51c8ff5b88d95c76255e18b13b760879 ]
Commit 6975a783d7b4 ("powerpc/boot: Allow building the zImage wrapper
as a relocatable ET_DYN", 2011-04-12) changed the procedure descriptor
at the start of crt0.S to have a hard-coded start address of 0x500000
rather than a reference to _zimage_start, presumably because having
a reference to a symbol introduced a relocation which is awkward to
handle in a position-independent executable. Unfortunately, what is
at 0x500000 in the COFF image is not the first instruction, but the
procedure descriptor itself, that is, a word containing 0x500000,
which is not a valid instruction. Hence, booting a COFF zImage
results in a "DEFAULT CATCH!, code=FFF00700" message from Open
Firmware.
This fixes the problem by (a) putting the procedure descriptor in the
data section and (b) adding a branch to _zimage_start as the first
instruction in the program.
Fixes: 6975a783d7b4 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
running nested
commit d391f1207067268261add0485f0f34503539c5b0 upstream.
I was investigating an issue with seabios >= 1.10 which stopped working
for nested KVM on Hyper-V. The problem appears to be in
handle_ept_violation() function: when we do fast mmio we need to skip
the instruction so we do kvm_skip_emulated_instruction(). This, however,
depends on VM_EXIT_INSTRUCTION_LEN field being set correctly in VMCS.
However, this is not the case.
Intel's manual doesn't mandate VM_EXIT_INSTRUCTION_LEN to be set when
EPT MISCONFIG occurs. While on real hardware it was observed to be set,
some hypervisors follow the spec and don't set it; we end up advancing
IP with some random value.
I checked with Microsoft and they confirmed they don't fill
VM_EXIT_INSTRUCTION_LEN on EPT MISCONFIG.
Fix the issue by doing instruction skip through emulator when running
nested.
Fixes: 68c3b4d1676d870f0453c31d5a52e7e65c7448ae
Suggested-by: Radim Krčmář <rkrcmar@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
[mhaboustak: backport to 4.9.y]
Signed-off-by: Mike Haboustak <haboustak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bec0de4cfad21bd284dbddee016ed1767a5d2823 upstream.
KEXEC needs the new kernel's load address to be aligned on a page
boundary (see sanity_check_segment_list()), but on MIPS the default
vmlinuz load address is only explicitly aligned to 16 bytes.
Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase
the alignment calculated by calc_vmlinuz_load_addr to 64KB.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21131/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: <stable@vger.kernel.org> # 2.6.36+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 92aa0718c9fa5160ad2f0e7b5bffb52f1ea1e51a upstream.
This patch is borrowed from ARM64 to ensure pmd_present() returns false
after pmd_mknotpresent(). This is needed for THP.
References: 5bb1cc0ff9a6 ("arm64: Ensure pmd_present() returns false after pmd_mknotpresent()")
Reviewed-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21135/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: <stable@vger.kernel.org> # 3.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e81434995081fd7efb755fd75576b35dbb0850b1 upstream.
____kvm_handle_fault_on_reboot() provides a generic exception fixup
handler that is used to cleanly handle faults on VMX/SVM instructions
during reboot (or at least try to). If there isn't a reboot in
progress, ____kvm_handle_fault_on_reboot() treats any exception as
fatal to KVM and invokes kvm_spurious_fault(), which in turn generates
a BUG() to get a stack trace and die.
When it was originally added by commit 4ecac3fd6dc2 ("KVM: Handle
virtualization instruction #UD faults during reboot"), the "call" to
kvm_spurious_fault() was handcoded as PUSH+JMP, where the PUSH'd value
is the RIP of the faulting instructing.
The PUSH+JMP trickery is necessary because the exception fixup handler
code lies outside of its associated function, e.g. right after the
function. An actual CALL from the .fixup code would show a slightly
bogus stack trace, e.g. an extra "random" function would be inserted
into the trace, as the return RIP on the stack would point to no known
function (and the unwinder will likely try to guess who owns the RIP).
Unfortunately, the JMP was replaced with a CALL when the macro was
reworked to not spin indefinitely during reboot (commit b7c4145ba2eb
"KVM: Don't spin on virt instruction faults during reboot"). This
causes the aforementioned behavior where a bogus function is inserted
into the stack trace, e.g. my builds like to blame free_kvm_area().
Revert the CALL back to a JMP. The changelog for commit b7c4145ba2eb
("KVM: Don't spin on virt instruction faults during reboot") contains
nothing that indicates the switch to CALL was deliberate. This is
backed up by the fact that the PUSH <insn RIP> was left intact.
Note that an alternative to the PUSH+JMP magic would be to JMP back
to the "real" code and CALL from there, but that would require adding
a JMP in the non-faulting path to avoid calling kvm_spurious_fault()
and would add no value, i.e. the stack trace would be the same.
Using CALL:
------------[ cut here ]------------
kernel BUG at /home/sean/go/src/kernel.org/linux/arch/x86/kvm/x86.c:356!
invalid opcode: 0000 [#1] SMP
CPU: 4 PID: 1057 Comm: qemu-system-x86 Not tainted 4.20.0-rc6+ #75
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_spurious_fault+0x5/0x10 [kvm]
Code: <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41
RSP: 0018:ffffc900004bbcc8 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff888273fd8000 R08: 00000000000003e8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000784 R12: ffffc90000371fb0
R13: 0000000000000000 R14: 000000026d763cf4 R15: ffff888273fd8000
FS: 00007f3d69691700(0000) GS:ffff888277800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f89bc56fe0 CR3: 0000000271a5a001 CR4: 0000000000362ee0
Call Trace:
free_kvm_area+0x1044/0x43ea [kvm_intel]
? vmx_vcpu_run+0x156/0x630 [kvm_intel]
? kvm_arch_vcpu_ioctl_run+0x447/0x1a40 [kvm]
? kvm_vcpu_ioctl+0x368/0x5c0 [kvm]
? kvm_vcpu_ioctl+0x368/0x5c0 [kvm]
? __set_task_blocked+0x38/0x90
? __set_current_blocked+0x50/0x60
? __fpu__restore_sig+0x97/0x490
? do_vfs_ioctl+0xa1/0x620
? __x64_sys_futex+0x89/0x180
? ksys_ioctl+0x66/0x70
? __x64_sys_ioctl+0x16/0x20
? do_syscall_64+0x4f/0x100
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
Modules linked in: vhost_net vhost tap kvm_intel kvm irqbypass bridge stp llc
---[ end trace 9775b14b123b1713 ]---
Using JMP:
------------[ cut here ]------------
kernel BUG at /home/sean/go/src/kernel.org/linux/arch/x86/kvm/x86.c:356!
invalid opcode: 0000 [#1] SMP
CPU: 6 PID: 1067 Comm: qemu-system-x86 Not tainted 4.20.0-rc6+ #75
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_spurious_fault+0x5/0x10 [kvm]
Code: <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41
RSP: 0018:ffffc90000497cd0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88827058bd40 R08: 00000000000003e8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000784 R12: ffffc90000369fb0
R13: 0000000000000000 R14: 00000003c8fc6642 R15: ffff88827058bd40
FS: 00007f3d7219e700(0000) GS:ffff888277900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3d64001000 CR3: 0000000271c6b004 CR4: 0000000000362ee0
Call Trace:
vmx_vcpu_run+0x156/0x630 [kvm_intel]
? kvm_arch_vcpu_ioctl_run+0x447/0x1a40 [kvm]
? kvm_vcpu_ioctl+0x368/0x5c0 [kvm]
? kvm_vcpu_ioctl+0x368/0x5c0 [kvm]
? __set_task_blocked+0x38/0x90
? __set_current_blocked+0x50/0x60
? __fpu__restore_sig+0x97/0x490
? do_vfs_ioctl+0xa1/0x620
? __x64_sys_futex+0x89/0x180
? ksys_ioctl+0x66/0x70
? __x64_sys_ioctl+0x16/0x20
? do_syscall_64+0x4f/0x100
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
Modules linked in: vhost_net vhost tap kvm_intel kvm irqbypass bridge stp llc
---[ end trace f9daedb85ab3ddba ]---
Fixes: b7c4145ba2eb ("KVM: Don't spin on virt instruction faults during reboot")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 32043fa065b51e0b1433e48d118821c71b5cd65d upstream.
Currently the copy_to_user of data in the gentry struct is copying
uninitiaized data in field _pad from the stack to userspace.
Fix this by explicitly memset'ing gentry to zero, this also will zero any
compiler added padding fields that may be in struct (currently there are
none).
Detected by CoverityScan, CID#200783 ("Uninitialized scalar variable")
Fixes: b263b31e8ad6 ("x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Cc: security@kernel.org
Link: https://lkml.kernel.org/r/20181218172956.1440-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Bug: 120439617
Change-Id: I83fdb2088f17e71f377e5864d217655b47839267
Signed-off-by: Alistair Strachan <astrachan@google.com>
|
|
Changes in 4.4.169
lib/interval_tree_test.c: make test options module parameters
lib/interval_tree_test.c: allow full tree search
lib/rbtree_test.c: make input module parameters
lib/rbtree-test: lower default params
lib/interval_tree_test.c: allow users to limit scope of endpoint
timer/debug: Change /proc/timer_list from 0444 to 0400
powerpc/boot: Fix random libfdt related build errors
pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11
aio: fix spectre gadget in lookup_ioctx
MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310
tracing: Fix memory leak in set_trigger_filter()
tracing: Fix memory leak of instance function hash filters
powerpc/msi: Fix NULL pointer access in teardown code
Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec"
f2fs: fix a panic caused by NULL flush_cmd_control
mac80211: don't WARN on bad WMM parameters from buggy APs
mac80211: Fix condition validating WMM IE
mac80211_hwsim: fix module init error paths for netlink
scsi: libiscsi: Fix NULL pointer dereference in iscsi_eh_session_reset
scsi: vmw_pscsi: Rearrange code to avoid multiple calls to free_irq during unload
x86/earlyprintk/efi: Fix infinite loop on some screen widths
drm/msm: Grab a vblank reference when waiting for commit_done
ARC: io.h: Implement reads{x}()/writes{x}()
bonding: fix 802.3ad state sent to partner when unbinding slave
SUNRPC: Fix a potential race in xprt_connect()
sbus: char: add of_node_put()
drivers/sbus/char: add of_node_put()
drivers/tty: add missing of_node_put()
ide: pmac: add of_node_put()
clk: mmp: Off by one in mmp_clk_add()
Input: omap-keypad - fix keyboard debounce configuration
libata: whitelist all SAMSUNG MZ7KM* solid-state disks
mv88e6060: disable hardware level MAC learning
ARM: 8814/1: mm: improve/fix ARM v7_dma_inv_range() unaligned address handling
cifs: In Kconfig CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs)
i2c: axxia: properly handle master timeout
i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node
rtc: snvs: add a missing write sync
rtc: snvs: Add timeouts to avoid kernel lockups
ALSA: isa/wavefront: prevent some out of bound writes
Linux 4.4.169
Change-Id: Ic1bde8f64625c7787feb8e7411b15e70a2f76981
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
[ Upstream commit a1208f6a822ac29933e772ef1f637c5d67838da9 ]
This patch addresses possible memory corruption when
v7_dma_inv_range(start_address, end_address) address parameters are not
aligned to whole cache lines. This function issues "invalidate" cache
management operations to all cache lines from start_address (inclusive)
to end_address (exclusive). When start_address and/or end_address are
not aligned, the start and/or end cache lines are first issued "clean &
invalidate" operation. The assumption is this is done to ensure that any
dirty data addresses outside the address range (but part of the first or
last cache lines) are cleaned/flushed so that data is not lost, which
could happen if just an invalidate is issued.
The problem is that these first/last partial cache lines are issued
"clean & invalidate" and then "invalidate". This second "invalidate" is
not required and worse can cause "lost" writes to addresses outside the
address range but part of the cache line. If another component writes to
its part of the cache line between the "clean & invalidate" and
"invalidate" operations, the write can get lost. This fix is to remove
the extra "invalidate" operation when unaligned addressed are used.
A kernel module is available that has a stress test to reproduce the
issue and a unit test of the updated v7_dma_inv_range(). It can be
downloaded from
http://ftp.sageembedded.com/outgoing/linux/cache-test-20181107.tgz.
v7_dma_inv_range() is call by dmac_[un]map_area(addr, len, direction)
when the direction is DMA_FROM_DEVICE. One can (I believe) successfully
argue that DMA from a device to main memory should use buffers aligned
to cache line size, because the "clean & invalidate" might overwrite
data that the device just wrote using DMA. But if a driver does use
unaligned buffers, at least this fix will prevent memory corruption
outside the buffer.
Signed-off-by: Chris Cole <chris@sageembedded.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 10d443431dc2bb733cf7add99b453e3fb9047a2e ]
Some ARC CPU's do not support unaligned loads/stores. Currently, generic
implementation of reads{b/w/l}()/writes{b/w/l}() is being used with ARC.
This can lead to misfunction of some drivers as generic functions do a
plain dereference of a pointer that can be unaligned.
Let's use {get/put}_unaligned() helpers instead of plain dereference of
pointer in order to fix. The helpers allow to get and store data from an
unaligned address whilst preserving the CPU internal alignment.
According to [1], the use of these helpers are costly in terms of
performance so we added an initial check for a buffer already aligned so
that the usage of the helpers can be avoided, when possible.
[1] Documentation/unaligned-memory-access.txt
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Tested-by: Vitor Soares <soares@synopsys.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 79c2206d369b87b19ac29cb47601059b6bf5c291 ]
An affected screen resolution is 1366 x 768, which width is not
divisible by 8, the default font width. On such screens, when longer
lines are earlyprintk'ed, overflow-to-next-line can never trigger,
due to the left-most x-coordinate of the next character always less
than the screen width. Earlyprintk will infinite loop in trying to
print the rest of the string but unable to, due to the line being
full.
This patch makes the trigger consider the right-most x-coordinate,
instead of left-most, as the value to compare against the screen
width threshold.
Signed-off-by: YiFei Zhu <zhuyifei1999@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-12-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 78e7b15e17ac175e7eed9e21c6f92d03d3b0a6fa upstream.
The arch_teardown_msi_irqs() function assumes that controller ops
pointers were already checked in arch_setup_msi_irqs(), but this
assumption is wrong: arch_teardown_msi_irqs() can be called even when
arch_setup_msi_irqs() returns an error (-ENOSYS).
This can happen in the following scenario:
- msi_capability_init() calls pci_msi_setup_msi_irqs()
- pci_msi_setup_msi_irqs() returns -ENOSYS
- msi_capability_init() notices the error and calls free_msi_irqs()
- free_msi_irqs() calls pci_msi_teardown_msi_irqs()
This is easier to see when CONFIG_PCI_MSI_IRQ_DOMAIN is not set and
pci_msi_setup_msi_irqs() and pci_msi_teardown_msi_irqs() are just
aliases to arch_setup_msi_irqs() and arch_teardown_msi_irqs().
The call to free_msi_irqs() upon pci_msi_setup_msi_irqs() failure
seems legit, as it does additional cleanup; e.g.
list_del(&entry->list) and kfree(entry) inside free_msi_irqs() do
happen (MSI descriptors are allocated before pci_msi_setup_msi_irqs()
is called and need to be cleaned up if that fails).
Fixes: 6b2fd7efeb88 ("PCI/MSI/PPC: Remove arch_msi_check_device()")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 64c3f648c25d108f346fdc96c15180c6b7d250e9 ]
Once in a while I see build errors similar to the following
when building images from a clean tree.
Building powerpc:virtex-ml507:44x/virtex5_defconfig ... failed
------------
Error log:
arch/powerpc/boot/treeboot-akebono.c:37:20: fatal error:
libfdt.h: No such file or directory
Building powerpc:bamboo:smpdev:44x/bamboo_defconfig ... failed
------------
Error log:
arch/powerpc/boot/treeboot-akebono.c:37:20: fatal error:
libfdt.h: No such file or directory
arch/powerpc/boot/treeboot-currituck.c:35:20: fatal error:
libfdt.h: No such file or directory
Rebuilds will succeed.
Turns out that several source files in arch/powerpc/boot/ include
libfdt.h, but Makefile dependencies are incomplete. Let's fix that.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[groeck: Backport to v4.4.y]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Changes in 4.4.168
ipv6: Check available headroom in ip6_xmit() even without options
net: 8139cp: fix a BUG triggered by changing mtu with network traffic
net: phy: don't allow __set_phy_supported to add unsupported modes
net: Prevent invalid access to skb->prev in __qdisc_drop_all
rtnetlink: ndo_dflt_fdb_dump() only work for ARPHRD_ETHER devices
tcp: fix NULL ref in tail loss probe
tun: forbid iface creation with rtnl ops
neighbour: Avoid writing before skb->head in neigh_hh_output()
ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup
ARM: OMAP1: ams-delta: Fix possible use of uninitialized field
sysv: return 'err' instead of 0 in __sysv_write_inode
s390/cpum_cf: Reject request for sampling in event initialization
hwmon: (ina2xx) Fix current value calculation
ASoC: dapm: Recalculate audio map forcely when card instantiated
hwmon: (w83795) temp4_type has writable permission
Btrfs: send, fix infinite loop due to directory rename dependencies
ASoC: omap-mcpdm: Add pm_qos handling to avoid under/overruns with CPU_IDLE
ASoC: omap-dmic: Add pm_qos handling to avoid overruns with CPU_IDLE
exportfs: do not read dentry after free
bpf: fix check of allowed specifiers in bpf_trace_printk
USB: omap_udc: use devm_request_irq()
USB: omap_udc: fix crashes on probe error and module removal
USB: omap_udc: fix omap_udc_start() on 15xx machines
USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
KVM: x86: fix empty-body warnings
net: thunderx: fix NULL pointer dereference in nic_remove
ixgbe: recognize 1000BaseLX SFP modules as 1Gbps
net: hisilicon: remove unexpected free_netdev
drm/ast: fixed reading monitor EDID not stable issue
xen: xlate_mmu: add missing header to fix 'W=1' warning
fscache: fix race between enablement and dropping of object
fscache, cachefiles: remove redundant variable 'cache'
ocfs2: fix deadlock caused by ocfs2_defrag_extent()
hfs: do not free node before using
hfsplus: do not free node before using
debugobjects: avoid recursive calls with kmemleak
ocfs2: fix potential use after free
pstore: Convert console write to use ->write_buf
ALSA: pcm: remove SNDRV_PCM_IOCTL1_INFO internal command
KVM: nVMX: fix msr bitmaps to prevent L2 from accessing L0 x2APIC
KVM: nVMX: mark vmcs12 pages dirty on L2 exit
KVM: nVMX: Eliminate vmcs02 pool
KVM: VMX: introduce alloc_loaded_vmcs
KVM: VMX: make MSR bitmaps per-VCPU
KVM/x86: Add IBPB support
KVM/VMX: Emulate MSR_IA32_ARCH_CAPABILITIES
KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL
KVM/SVM: Allow direct access to MSR_IA32_SPEC_CTRL
KVM/x86: Remove indirect MSR op calls from SPEC_CTRL
x86: reorganize SMAP handling in user space accesses
x86: fix SMAP in 32-bit environments
x86: Introduce __uaccess_begin_nospec() and uaccess_try_nospec
x86/usercopy: Replace open coded stac/clac with __uaccess_{begin, end}
x86/uaccess: Use __uaccess_begin_nospec() and uaccess_try_nospec
x86/bugs, KVM: Support the combination of guest and host IBRS
x86/KVM/VMX: Expose SPEC_CTRL Bit(2) to the guest
KVM: SVM: Move spec control call after restore of GS
x86/bugs, KVM: Extend speculation control for VIRT_SPEC_CTRL
x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP
KVM: SVM: Implement VIRT_SPEC_CTRL support for SSBD
bpf: support 8-byte metafield access
bpf/verifier: Add spi variable to check_stack_write()
bpf/verifier: Pass instruction index to check_mem_access() and check_xadd()
bpf: Prevent memory disambiguation attack
wil6210: missing length check in wmi_set_ie
posix-timers: Sanitize overrun handling
mm/hugetlb.c: don't call region_abort if region_chg fails
hugetlbfs: fix offset overflow in hugetlbfs mmap
hugetlbfs: check for pgoff value overflow
hugetlbfs: fix bug in pgoff overflow checking
swiotlb: clean up reporting
sr: pass down correctly sized SCSI sense buffer
mm: remove write/force parameters from __get_user_pages_locked()
mm: remove write/force parameters from __get_user_pages_unlocked()
mm/nommu.c: Switch __get_user_pages_unlocked() to use __get_user_pages()
mm: replace get_user_pages_unlocked() write/force parameters with gup_flags
mm: replace get_user_pages_locked() write/force parameters with gup_flags
mm: replace get_vaddr_frames() write/force parameters with gup_flags
mm: replace get_user_pages() write/force parameters with gup_flags
mm: replace __access_remote_vm() write parameter with gup_flags
mm: replace access_remote_vm() write parameter with gup_flags
proc: don't use FOLL_FORCE for reading cmdline and environment
proc: do not access cmdline nor environ from file-backed areas
media: dvb-frontends: fix i2c access helpers for KASAN
matroxfb: fix size of memcpy
staging: speakup: Replace strncpy with memcpy
rocker: fix rocker_tlv_put_* functions for KASAN
selftests: Move networking/timestamping from Documentation
Linux 4.4.168
Change-Id: I71a633f645fada4b473abcff660a9ada3103592b
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit 768ae309a96103ed02eb1e111e838c87854d8b51 upstream.
This removes the 'write' and 'force' from get_user_pages() and replaces
them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers
as use of this flag can result in surprising behaviour (and hence bugs)
within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 4.4:
- Drop changes in rapidio, vchiq, goldfish
- Keep the "write" variable in amdgpu_ttm_tt_pin_userptr() as it's still
needed
- Also update calls from various other places that now use
get_user_pages_remote() upstream, which were updated there by commit
9beae1ea8930 "mm: replace get_user_pages_remote() write/force ..."
- Also update calls from hfi1 and ipath
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c164154f66f0c9b02673f07aa4f044f1d9c70274 upstream.
This removes the 'write' and 'force' use from get_user_pages_unlocked()
and replaces them with 'gup_flags' to make the use of FOLL_FORCE
explicit in callers as use of this flag can result in surprising
behaviour (and hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 4.4:
- Also update calls from process_vm_rw_single_vec() and async_pf_execute()
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bc226f07dcd3c9ef0b7f6236fe356ea4a9cb4769 upstream.
Expose the new virtualized architectural mechanism, VIRT_SSBD, for using
speculative store bypass disable (SSBD) under SVM. This will allow guests
to use SSBD on hardware that uses non-architectural mechanisms for enabling
SSBD.
[ tglx: Folded the migration fixup from Paolo Bonzini ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e7c587da125291db39ddf1f49b18e5970adbac17 upstream.
Intel and AMD have different CPUID bits hence for those use synthetic bits
which get set on the respective vendor's in init_speculation_control(). So
that debacles like what the commit message of
c65732e4f721 ("x86/cpu: Restore CPUID_8000_0008_EBX reload")
talks about don't happen anymore.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Jörg Otte <jrg.otte@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/20180504161815.GG9257@pd.tnic
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4: This was partly applied before; apply just the
missing bits]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ccbcd2674472a978b48c91c1fbfb66c0ff959f24 upstream.
AMD is proposing a VIRT_SPEC_CTRL MSR to handle the Speculative Store
Bypass Disable via MSR_AMD64_LS_CFG so that guests do not have to care
about the bit position of the SSBD bit and thus facilitate migration.
Also, the sibling coordination on Family 17H CPUs can only be done on
the host.
Extend x86_spec_ctrl_set_guest() and x86_spec_ctrl_restore_host() with an
extra argument for the VIRT_SPEC_CTRL MSR.
Hand in 0 from VMX and in SVM add a new virt_spec_ctrl member to the CPU
data structure which is going to be used in later patches for the actual
implementation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4: This was partly applied before; apply just the
missing bits]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 15e6c22fd8e5a42c5ed6d487b7c9fe44c2517765 upstream.
svm_vcpu_run() invokes x86_spec_ctrl_restore_host() after VMEXIT, but
before the host GS is restored. x86_spec_ctrl_restore_host() uses 'current'
to determine the host SSBD state of the thread. 'current' is GS based, but
host GS is not yet restored and the access causes a triple fault.
Move the call after the host GS restore.
Fixes: 885f82bfbc6f x86/process: Allow runtime control of Speculative Store Bypass
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit da39556f66f5cfe8f9c989206974f1cb16ca5d7c upstream.
Expose the CPUID.7.EDX[31] bit to the guest, and also guard against various
combinations of SPEC_CTRL MSR values.
The handling of the MSR (to take into account the host value of SPEC_CTRL
Bit(2)) is taken care of in patch:
KVM/SVM/VMX/x86/spectre_v2: Support the combination of guest and host IBRS
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
[dwmw2: Handle 4.9 guest CPUID differences, rename
guest_cpu_has_ibrs() → guest_cpu_has_spec_ctrl()]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4: Update feature bit name]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5cf687548705412da47c9cec342fd952d71ed3d5 upstream.
A guest may modify the SPEC_CTRL MSR from the value used by the
kernel. Since the kernel doesn't use IBRS, this means a value of zero is
what is needed in the host.
But the 336996-Speculative-Execution-Side-Channel-Mitigations.pdf refers to
the other bits as reserved so the kernel should respect the boot time
SPEC_CTRL value and use that.
This allows to deal with future extensions to the SPEC_CTRL interface if
any at all.
Note: This uses wrmsrl() instead of native_wrmsl(). I does not make any
difference as paravirt will over-write the callq *0xfff.. with the wrmsrl
assembler code.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 4.4: This was partly applied before; apply just the
missing bits]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 304ec1b050310548db33063e567123fae8fd0301 upstream.
Quoting Linus:
I do think that it would be a good idea to very expressly document
the fact that it's not that the user access itself is unsafe. I do
agree that things like "get_user()" want to be protected, but not
because of any direct bugs or problems with get_user() and friends,
but simply because get_user() is an excellent source of a pointer
that is obviously controlled from a potentially attacking user
space. So it's a prime candidate for then finding _subsequent_
accesses that can then be used to perturb the cache.
__uaccess_begin_nospec() covers __get_user() and copy_from_iter() where the
limit check is far away from the user pointer de-reference. In those cases
a barrier_nospec() prevents speculation with a potential pointer to
privileged memory. uaccess_try_nospec covers get_user_try.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727416953.33451.10508284228526170604.stgit@dwillia2-desk3.amr.corp.intel.com
[bwh: Backported to 4.4:
- Convert several more functions to use __uaccess_begin_nospec(), that
are just wrappers in mainline
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b5c4ae4f35325d520b230bab6eb3310613b72ac1 upstream.
In preparation for converting some __uaccess_begin() instances to
__uacess_begin_nospec(), make sure all 'from user' uaccess paths are
using the _begin(), _end() helpers rather than open-coded stac() and
clac().
No functional changes.
Suggested-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: torvalds@linux-foundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727416438.33451.17309465232057176966.stgit@dwillia2-desk3.amr.corp.intel.com
[bwh: Backported to 4.4:
- Convert several more functions to use __uaccess_begin_nospec(), that
are just wrappers in mainline
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b3bbfb3fb5d25776b8e3f361d2eedaabb0b496cd upstream.
For __get_user() paths, do not allow the kernel to speculate on the value
of a user controlled pointer. In addition to the 'stac' instruction for
Supervisor Mode Access Protection (SMAP), a barrier_nospec() causes the
access_ok() result to resolve in the pipeline before the CPU might take any
speculative action on the pointer value. Given the cost of 'stac' the
speculation barrier is placed after 'stac' to hopefully overlap the cost of
disabling SMAP with the cost of flushing the instruction pipeline.
Since __get_user is a major kernel interface that deals with user
controlled pointers, the __uaccess_begin_nospec() mechanism will prevent
speculative execution past an access_ok() permission check. While
speculative execution past access_ok() is not enough to lead to a kernel
memory leak, it is a necessary precondition.
To be clear, __uaccess_begin_nospec() is addressing a class of potential
problems near __get_user() usages.
Note, that while the barrier_nospec() in __uaccess_begin_nospec() is used
to protect __get_user(), pointer masking similar to array_index_nospec()
will be used for get_user() since it incorporates a bounds check near the
usage.
uaccess_try_nospec provides the same mechanism for get_user_try.
No functional changes.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andi Kleen <ak@linux.intel.com>
Suggested-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727415922.33451.5796614273104346583.stgit@dwillia2-desk3.amr.corp.intel.com
[bwh: Backported to 4.4: use current_thread_info()]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit de9e478b9d49f3a0214310d921450cf5bb4a21e6 upstream.
In commit 11f1a4b9755f ("x86: reorganize SMAP handling in user space
accesses") I changed how the stac/clac instructions were generated
around the user space accesses, which then made it possible to do
batched accesses efficiently for user string copies etc.
However, in doing so, I completely spaced out, and didn't even think
about the 32-bit case. And nobody really even seemed to notice, because
SMAP doesn't even exist until modern Skylake processors, and you'd have
to be crazy to run 32-bit kernels on a modern CPU.
Which brings us to Andy Lutomirski.
He actually tested the 32-bit kernel on new hardware, and noticed that
it doesn't work. My bad. The trivial fix is to add the required
uaccess begin/end markers around the raw accesses in <asm/uaccess_32.h>.
I feel a bit bad about this patch, just because that header file really
should be cleaned up to avoid all the duplicated code in it, and this
commit just expands on the problem. But this just fixes the bug without
any bigger cleanup surgery.
Reported-and-tested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 11f1a4b9755f5dbc3e822a96502ebe9b044b14d8 upstream.
This reorganizes how we do the stac/clac instructions in the user access
code. Instead of adding the instructions directly to the same inline
asm that does the actual user level access and exception handling, add
them at a higher level.
This is mainly preparation for the next step, where we will expose an
interface to allow users to mark several accesses together as being user
space accesses, but it does already clean up some code:
- the inlined trivial cases of copy_in_user() now do stac/clac just
once over the accesses: they used to do one pair around the user
space read, and another pair around the write-back.
- the {get,put}_user_ex() macros that are used with the catch/try
handling don't do any stac/clac at all, because that happens in the
try/catch surrounding them.
Other than those two cleanups that happened naturally from the
re-organization, this should not make any difference. Yet.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ecb586bd29c99fb4de599dec388658e74388daad upstream.
Having a paravirt indirect call in the IBRS restore path is not a
good idea, since we are trying to protect from speculative execution
of bogus indirect branch targets. It is also slower, so use
native_wrmsrl() on the vmentry path too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: d28b387fb74da95d69d2615732f50cceb38e9a4d
Link: http://lkml.kernel.org/r/20180222154318.20361-2-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b2ac58f90540e39324e7a29a7ad471407ae0bf48 upstream.
[ Based on a patch from Paolo Bonzini <pbonzini@redhat.com> ]
... basically doing exactly what we do for VMX:
- Passthrough SPEC_CTRL to guests (if enabled in guest CPUID)
- Save and restore SPEC_CTRL around VMExit and VMEntry only if the guest
actually used it.
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: kvm@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/1517669783-20732-1-git-send-email-karahmed@amazon.de
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d28b387fb74da95d69d2615732f50cceb38e9a4d upstream.
[ Based on a patch from Ashok Raj <ashok.raj@intel.com> ]
Add direct access to MSR_IA32_SPEC_CTRL for guests. This is needed for
guests that will only mitigate Spectre V2 through IBRS+IBPB and will not
be using a retpoline+IBPB based approach.
To avoid the overhead of saving and restoring the MSR_IA32_SPEC_CTRL for
guests that do not actually use the MSR, only start saving and restoring
when a non-zero is written to it.
No attempt is made to handle STIBP here, intentionally. Filtering STIBP
may be added in a future patch, which may require trapping all writes
if we don't want to pass it through directly to the guest.
[dwmw2: Clean up CPUID bits, save/restore manually, handle reset]
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: kvm@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/1517522386-18410-5-git-send-email-karahmed@amazon.de
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 28c1c9fabf48d6ad596273a11c46e0d0da3e14cd upstream.
Intel processors use MSR_IA32_ARCH_CAPABILITIES MSR to indicate RDCL_NO
(bit 0) and IBRS_ALL (bit 1). This is a read-only MSR. By default the
contents will come directly from the hardware, but user-space can still
override it.
[dwmw2: The bit in kvm_cpuid_7_0_edx_x86_features can be unconditional]
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: kvm@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/1517522386-18410-4-git-send-email-karahmed@amazon.de
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 15d45071523d89b3fb7372e2135fbd72f6af9506 upstream.
The Indirect Branch Predictor Barrier (IBPB) is an indirect branch
control mechanism. It keeps earlier branches from influencing
later ones.
Unlike IBRS and STIBP, IBPB does not define a new mode of operation.
It's a command that ensures predicted branch targets aren't used after
the barrier. Although IBRS and IBPB are enumerated by the same CPUID
enumeration, IBPB is very different.
IBPB helps mitigate against three potential attacks:
* Mitigate guests from being attacked by other guests.
- This is addressed by issing IBPB when we do a guest switch.
* Mitigate attacks from guest/ring3->host/ring3.
These would require a IBPB during context switch in host, or after
VMEXIT. The host process has two ways to mitigate
- Either it can be compiled with retpoline
- If its going through context switch, and has set !dumpable then
there is a IBPB in that path.
(Tim's patch: https://patchwork.kernel.org/patch/10192871)
- The case where after a VMEXIT you return back to Qemu might make
Qemu attackable from guest when Qemu isn't compiled with retpoline.
There are issues reported when doing IBPB on every VMEXIT that resulted
in some tsc calibration woes in guest.
* Mitigate guest/ring0->host/ring0 attacks.
When host kernel is using retpoline it is safe against these attacks.
If host kernel isn't using retpoline we might need to do a IBPB flush on
every VMEXIT.
Even when using retpoline for indirect calls, in certain conditions 'ret'
can use the BTB on Skylake-era CPUs. There are other mitigations
available like RSB stuffing/clearing.
* IBPB is issued only for SVM during svm_free_vcpu().
VMX has a vmclear and SVM doesn't. Follow discussion here:
https://lkml.org/lkml/2018/1/15/146
Please refer to the following spec for more details on the enumeration
and control.
Refer here to get documentation about mitigations.
https://software.intel.com/en-us/side-channel-security-support
[peterz: rebase and changelog rewrite]
[karahmed: - rebase
- vmx: expose PRED_CMD if guest has it in CPUID
- svm: only pass through IBPB if guest has it in CPUID
- vmx: support !cpu_has_vmx_msr_bitmap()]
- vmx: support nested]
[dwmw2: Expose CPUID bit too (AMD IBPB only for now as we lack IBRS)
PRED_CMD is a write-only MSR]
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: kvm@vger.kernel.org
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1515720739-43819-6-git-send-email-ashok.raj@intel.com
Link: https://lkml.kernel.org/r/1517522386-18410-3-git-send-email-karahmed@amazon.de
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 904e14fb7cb96401a7dc803ca2863fd5ba32ffe6 upstream.
Place the MSR bitmap in struct loaded_vmcs, and update it in place
every time the x2apic or APICv state can change. This is rare and
the loop can handle 64 MSRs per iteration, in a similar fashion as
nested_vmx_prepare_msr_bitmap.
This prepares for choosing, on a per-VM basis, whether to intercept
the SPEC_CTRL and PRED_CMD MSRs.
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4:
- APICv support looked different
- We still need to intercept the APIC_ID MSR
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f21f165ef922c2146cc5bdc620f542953c41714b upstream.
Group together the calls to alloc_vmcs and loaded_vmcs_init. Soon we'll also
allocate an MSR bitmap there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4:
- No loaded_vmcs::shadow_vmcs field to initialise
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit de3a0021a60635de96aa92713c1a31a96747d72c upstream.
The potential performance advantages of a vmcs02 pool have never been
realized. To simplify the code, eliminate the pool. Instead, a single
vmcs02 is allocated per VCPU when the VCPU enters VMX operation.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Ameya More <ameya.more@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4:
- No loaded_vmcs::shadow_vmcs field to initialise
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9f04407f2e0b3fc9ff7913c65fcfcb0a4b61570 upstream.
The host physical addresses of L1's Virtual APIC Page and Posted
Interrupt descriptor are loaded into the VMCS02. The CPU may write
to these pages via their host physical address while L2 is running,
bypassing address-translation-based dirty tracking (e.g. EPT write
protection). Mark them dirty on every exit from L2 to prevent them
from getting out of sync with dirty tracking.
Also mark the virtual APIC page and the posted interrupt descriptor
dirty when KVM is virtualizing posted interrupt processing.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d048c098218e91ed0e10dfa1f0f80e2567fe4ef7 upstream.
msr bitmap can be used to avoid a VM exit (interception) on guest MSR
accesses. In some configurations of VMX controls, the guest can even
directly access host's x2APIC MSRs. See SDM 29.5 VIRTUALIZING MSR-BASED
APIC ACCESSES.
L2 could read all L0's x2APIC MSRs and write TPR, EOI, and SELF_IPI.
To do so, L1 would first trick KVM to disable all possible interceptions
by enabling APICv features and then would turn those features off;
nested_vmx_merge_msr_bitmap() only disabled interceptions, so VMX would
not intercept previously enabled MSRs even though they were not safe
with the new configuration.
Correctly re-enabling interceptions is not enough as a second bug would
still allow L1+L2 to access host's MSRs: msr bitmap was shared for all
VMCSs, so L1 could trigger a race to get the desired combination of msr
bitmap and VMX controls.
This fix allocates a msr bitmap for every L1 VCPU, allows only safe
x2APIC MSRs from L1's msr bitmap, and disables msr bitmaps if they would
have to intercept everything anyway.
Fixes: 3af18d9c5fe9 ("KVM: nVMX: Prepare for using hardware MSR bitmap")
Reported-by: Jim Mattson <jmattson@google.com>
Suggested-by: Wincy Van <fanwenyi0529@gmail.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[bwh: Backported to 4.4:
- handle_vmon() doesn't allocate a cached vmcs12
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 354cb410d87314e2eda344feea84809e4261570a ]
We get the following warnings about empty statements when building
with 'W=1':
arch/x86/kvm/lapic.c:632:53: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1907:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1936:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1975:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Rework the debug helper macro to get rid of these warnings.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 613a41b0d16e617f46776a93b975a1eeea96417c ]
On s390 command perf top fails
[root@s35lp76 perf] # ./perf top -F100000 --stdio
Error:
cycles: PMU Hardware doesn't support sampling/overflow-interrupts.
Try 'perf stat'
[root@s35lp76 perf] #
Using event -e rb0000 works as designed. Event rb0000 is the event
number of the sampling facility for basic sampling.
During system start up the following PMUs are installed in the kernel's
PMU list (from head to tail):
cpum_cf --> s390 PMU counter facility device driver
cpum_sf --> s390 PMU sampling facility device driver
uprobe
kprobe
tracepoint
task_clock
cpu_clock
Perf top executes following functions and calls perf_event_open(2) system
call with different parameters many times:
cmd_top
--> __cmd_top
--> perf_evlist__add_default
--> __perf_evlist__add_default
--> perf_evlist__new_cycles (creates event type:0 (HW)
config 0 (CPU_CYCLES)
--> perf_event_attr__set_max_precise_ip
Uses perf_event_open(2) to detect correct
precise_ip level. Fails 3 times on s390 which is ok.
Then functions cmd_top
--> __cmd_top
--> perf_top__start_counters
-->perf_evlist__config
--> perf_can_comm_exec
--> perf_probe_api
This functions test support for the following events:
"cycles:u", "instructions:u", "cpu-clock:u" using
--> perf_do_probe_api
--> perf_event_open_cloexec
Test the close on exec flag support with
perf_event_open(2).
perf_do_probe_api returns true if the event is
supported.
The function returns true because event cpu-clock is
supported by the PMU cpu_clock.
This is achieved by many calls to perf_event_open(2).
Function perf_top__start_counters now calls perf_evsel__open() for every
event, which is the default event cpu_cycles (config:0) and type HARDWARE
(type:0) which a predfined frequence of 4000.
Given the above order of the PMU list, the PMU cpum_cf gets called first
and returns 0, which indicates support for this sampling. The event is
fully allocated in the function perf_event_open (file kernel/event/core.c
near line 10521 and the following check fails:
event = perf_event_alloc(&attr, cpu, task, group_leader, NULL,
NULL, NULL, cgroup_fd);
if (IS_ERR(event)) {
err = PTR_ERR(event);
goto err_cred;
}
if (is_sampling_event(event)) {
if (event->pmu->capabilities & PERF_PMU_CAP_NO_INTERRUPT) {
err = -EOPNOTSUPP;
goto err_alloc;
}
}
The check for the interrupt capabilities fails and the system call
perf_event_open() returns -EOPNOTSUPP (-95).
Add a check to return -ENODEV when sampling is requested in PMU cpum_cf.
This allows common kernel code in the perf_event_open() system call to
test the next PMU in above list.
Fixes: 97b1198fece0 (" "s390, perf: Use common PMU interrupt disabled code")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cec83ff1241ec98113a19385ea9e9cfa9aa4125b ]
While playing with initialization order of modem device, it has been
discovered that under some circumstances (early console init, I
believe) its .pm() callback may be called before the
uart_port->private_data pointer is initialized from
plat_serial8250_port->private_data, resulting in NULL pointer
dereference. Fix it by checking for uninitialized pointer before using
it in modem_pm().
Fixes: aabf31737a6a ("ARM: OMAP1: ams-delta: update the modem to use regulator API")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eef3dc34a1e0b01d53328b88c25237bcc7323777 ]
When building the kernel with Clang, the following section mismatch
warning appears:
WARNING: vmlinux.o(.text+0x38b3c): Section mismatch in reference from
the function omap44xx_prm_late_init() to the function
.init.text:omap44xx_prm_enable_io_wakeup()
The function omap44xx_prm_late_init() references
the function __init omap44xx_prm_enable_io_wakeup().
This is often because omap44xx_prm_late_init lacks a __init
annotation or the annotation of omap44xx_prm_enable_io_wakeup is wrong.
Remove the __init annotation from omap44xx_prm_enable_io_wakeup so there
is no more mismatch.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Changes in 4.4.167
media: em28xx: Fix use-after-free when disconnecting
Revert "wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()"
rapidio/rionet: do not free skb before reading its length
s390/qeth: fix length check in SNMP processing
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
kvm: mmu: Fix race in emulated page table writes
xtensa: enable coprocessors that are being flushed
xtensa: fix coprocessor context offset definitions
Btrfs: ensure path name is null terminated at btrfs_control_ioctl
ALSA: wss: Fix invalid snd_free_pages() at error path
ALSA: ac97: Fix incorrect bit shift at AC97-SPSA control write
ALSA: control: Fix race between adding and removing a user element
ALSA: sparc: Fix invalid snd_free_pages() at error path
ext2: fix potential use after free
dmaengine: at_hdmac: fix memory leak in at_dma_xlate()
dmaengine: at_hdmac: fix module unloading
btrfs: release metadata before running delayed refs
USB: usb-storage: Add new IDs to ums-realtek
usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream series
misc: mic/scif: fix copy-paste error in scif_create_remote_lookup
Kbuild: suppress packed-not-aligned warning for default setting only
exec: avoid gcc-8 warning for get_task_comm
disable stringop truncation warnings for now
kobject: Replace strncpy with memcpy
unifdef: use memcpy instead of strncpy
kernfs: Replace strncpy with memcpy
ip_tunnel: Fix name string concatenate in __ip_tunnel_create()
drm: gma500: fix logic error
scsi: bfa: convert to strlcpy/strlcat
staging: rts5208: fix gcc-8 logic error warning
kdb: use memmove instead of overlapping memcpy
iser: set sector for ambiguous mr status errors
uprobes: Fix handle_swbp() vs. unregister() + register() race once more
MIPS: ralink: Fix mt7620 nd_sd pinmux
mips: fix mips_get_syscall_arg o32 check
drm/ast: Fix incorrect free on ioregs
scsi: scsi_devinfo: cleanly zero-pad devinfo strings
ALSA: trident: Suppress gcc string warning
scsi: csiostor: Avoid content leaks and casts
kgdboc: Fix restrict error
kgdboc: Fix warning with module build
leds: call led_pwm_set() in leds-pwm to enforce default LED_OFF
leds: turn off the LED and wait for completion on unregistering LED class device
leds: leds-gpio: Fix return value check in create_gpio_led()
Input: xpad - quirk all PDP Xbox One gamepads
Input: matrix_keypad - check for errors from of_get_named_gpio()
Input: elan_i2c - add ELAN0620 to the ACPI table
Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR
Input: elan_i2c - add support for ELAN0621 touchpad
btrfs: Always try all copies when reading extent buffers
Btrfs: fix use-after-free when dumping free space
ARC: change defconfig defaults to ARCv2
arc: [devboards] Add support of NFSv3 ACL
mm: cleancache: fix corruption on missed inode invalidation
mm: mlock: avoid increase mm->locked_vm on mlock() when already mlock2(,MLOCK_ONFAULT)
usb: gadget: dummy: fix nonsensical comparisons
iommu/vt-d: Fix NULL pointer dereference in prq_event_thread()
iommu/ipmmu-vmsa: Fix crash on early domain free
can: rcar_can: Fix erroneous registration
batman-adv: Expand merged fragment buffer for full packet
bnx2x: Assign unique DMAE channel number for FW DMAE transactions.
qed: Fix PTT leak in qed_drain()
qed: Fix reading wrong value in loop condition
net/mlx4_core: Zero out lkey field in SW2HW_MPT fw command
net/mlx4_core: Fix uninitialized variable compilation warning
net/mlx4: Fix UBSAN warning of signed integer overflow
net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts
iommu/vt-d: Use memunmap to free memremap
net: amd: add missing of_node_put()
usb: quirk: add no-LPM quirk on SanDisk Ultra Flair device
usb: appledisplay: Add 27" Apple Cinema Display
USB: check usb_get_extra_descriptor for proper size
ALSA: usb-audio: Fix UAF decrement if card has no live interfaces in card.c
ALSA: hda: Add support for AMD Stoney Ridge
ALSA: pcm: Fix starvation on down_write_nonblock()
ALSA: pcm: Call snd_pcm_unlink() conditionally at closing
ALSA: pcm: Fix interval evaluation with openmin/max
virtio/s390: avoid race on vcdev->config
virtio/s390: fix race in ccw_io_helper()
SUNRPC: Fix leak of krb5p encode pages
xhci: Prevent U1/U2 link pm states if exit latency is too long
Staging: lustre: remove two build warnings
cifs: Fix separator when building path from dentry
tty: serial: 8250_mtk: always resume the device in probe.
kgdboc: fix KASAN global-out-of-bounds bug in param_set_kgdboc_var()
mac80211_hwsim: Timer should be initialized before device registered
mac80211: Clear beacon_int in ieee80211_do_stop
mac80211: ignore tx status for PS stations in ieee80211_tx_status_ext
mac80211: fix reordering of buffered broadcast packets
mac80211: ignore NullFunc frames in the duplicate detection
Linux 4.4.167
Change-Id: Ib893e2bb7e739960eed0710447033f7ab65dab4f
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit 6b04114f6fae5e84d33404c2970b1949c032546e upstream.
By default NFSv3 doesn't support ACL (Access Control Lists)
which might be quite convenient to have so that
mounted NFS behaves exactly as any other local file-system.
In particular missing support of ACL makes umask useless.
This among other thigs fixes Glibc's "nptl/tst-umask1".
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Cupertino Miranda <cmiranda@synopsys.com>
Cc: stable@vger.kernel.org #4.14+
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b7cc40c32a8bfa6f2581a71747f6a7d491fe43ba upstream.
Change the default defconfig (used with 'make defconfig') to the ARCv2
nsim_hs_defconfig, and also switch the default Kconfig ISA selection to
ARCv2.
This allows several default defconfigs (e.g. make defconfig, make
allnoconfig, make tinyconfig) to all work with ARCv2 by default.
Note since we change default architecture from ARCompact to ARCv2
it's required to explicitly mention architecture type in ARCompact
defconfigs otherwise ARCv2 will be implied and binaries will be
generated for ARCv2.
Cc: <stable@vger.kernel.org> # 4.4.x
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c50cbd85cd7027d32ac5945bb60217936b4f7eaf upstream.
When checking for TIF_32BIT_REGS flag, mips_get_syscall_arg() should
use the task specified as its argument instead of the current task.
This potentially affects all syscall_get_arguments() users
who specify tasks different from the current.
Fixes: c0ff3c53d4f99 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21185/
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7d35baa4e9ec4b717bc0e58a39cdb6a1c50f5465 upstream.
In case the nd_sd group is set to the sd-card function, Pins 45 + 46 are
configured as GPIOs. If they are blocked by the sd function, they can't
be used as GPIOs.
Reported-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: f576fb6a0700 ("MIPS: ralink: cleanup the soc specific pinmux data")
Patchwork: https://patchwork.linux-mips.org/patch/21220/
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|