summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-08-03MIPS: AR7: Fix build failures when CONFIG_SERIAL_8250 is not enabledFlorian Fainelli
This patch fixes the following build failure when CONFIG_SERIAL_8250 is not enabled in the kernel configuration: arch/mips/ar7/built-in.o: In function 'ar7_register_devices': platform.c:(.init.text+0x61c): undefined reference to 'early_serial_setup' platform.c:(.init.text+0x61c): relocation truncated to fit: R_MIPS_26 against 'early_serial_setup' platform.c:(.init.text+0x68c): undefined reference to 'early_serial_setup' platform.c:(.init.text+0x68c): relocation truncated to fit: R_MIPS_26 against 'early_serial_setup' Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Fix read buffer overflowRoel Kluin
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: AR7: Fix build warning on memory.cFlorian Fainelli
This patch fixes the following build warning: arch/mips/ar7/memory.c: In function 'memsize': arch/mips/ar7/memory.c:55: warning: passing argument 1 of 'writel' makes integer from pointer without a cast Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Octeon PCIe: Make hardware and software bus numbers match.David Daney
Some SiliconImage PCIe SATA controlers are not detected when the bus numbers differ. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: RBTX4939: Fix IOC pin-enable register updatingAtsushi Nemoto
The rbtx4939_update_ioc_pen() expects txx9_ce_res[] already initialized. Call it after tx4939_setup(). Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Simplify and correct interrupt handling for MSP4200Shane McDonald
The current interrupt handling code for the MSP4200 always masks an interrupt before acknowledging it. This is not required, as that will be handled by the level interrupt handler. This change simplifies the MSP4200 code to remove the masking in the ack routine, and makes sure that the minimum required operation is performed for masking and acking, rather than always both masking and acking the interrupt. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: MSPxxxx: define MIPS34K_MISSED_ITLB_WAR for other PMC-Sierra SoCFlorian Fainelli
Trying to build a PMC-Sierra MSP4200 VoIP gateway defconfig will not work since MIPS34K_MISSED_ITLB_WAR is not defined for all boards supported within pmc-serria/msp71xx. This patch defines MIPS34K_MISSED_ITLB_WAR to prevent such build failures: CHK include/linux/version.h CHK include/linux/utsrelease.h SYMLINK include/asm -> include/asm-mips CC arch/mips/kernel/asm-offsets.s In file included fromlinux-msp71xx/linux-2.6.29/arch/mips/include/asm/bitops.h:24, from include/linux/bitops.h:17, from include/linux/kernel.h:15, from include/linux/sched.h:52, from arch/mips/kernel/asm-offsets.c:13: linux-msp71xx/linux-2.6.29/arch/mips/include/asm/war.h:241:2: error: #error Check setting of MIPS34K_MISSED_ITLB_WAR for your platform This fixes a compile error when building for the MSP4200 boards. Identical patches to fix this were send by Florian Fainelli <florian@openwrt.org> Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: MSP71xx: fix build failures on msp_irq_slp.cFlorian Fainelli
Trying to build MSP4200 VoIP defconfig also fails on msp_irq_slp.c with a non-existing reference to mask_slp_irq, which is in turn mask_msp_slp_irq. Passed that, we will also miss a comma when calling set_irq_chip_and_handler. This patch fixes both issues. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Fix loading of modules with unresolved weak symbolsGabor Juhos
Loading of modules with unresolved weak symbols fails on MIPS since '88173507e4fc1e7ecd111b0565e8cba0cb7dae6d'. Modules: handle symbols that have a zero value The module subsystem cannot handle symbols that are zero. If symbols are present that have a zero value then the module resolver prints out a message that these symbols are unresolved. We have to use IS_ERR_VALUE() to check that a symbol has been resolved or not. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: SMTC: Move cross VPE writes to after a TC is assigned to VPE.Kurt Martin
Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Raghu Gandham <raghu@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03[PATCH] MIPS: SMTC: Fix compile errorRaghu Gandham
Commit fc03bc1715ca0ad4ccfe97aab16bcc9e7129c1a4 breaks when SMTC support is enabled on Malta. Signed-off-by: Raghu Gandham <raghu@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Avoid clobbering struct pt_regs in kthreadsDavid Daney
The resume() implementation octeon_switch.S examines the saved cp0_status register. We were clobbering the entire pt_regs structure in kernel threads leading to random crashes. When switching away from a kernel thread, the saved cp0_status is examined and if bit 30 is set it is cleared and the CP2 state saved into the pt_regs structure. Since the kernel thread stack overlaid the pt_regs structure this resulted in a corrupt stack. When the kthread with the corrupt stack was resumed, it could crash if it used any of the data in the stack that was clobbered. We fix it by moving the kernel thread stack down so it doesn't overlay pt_regs. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: AR7: Remove unused inclusions of <linux/version.h>.Huang Weiyi
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: MIPSsim: Fix unbalance brace in mipssim get_c0_compare_int()Yoichi Yuasa
cc1: warnings being treated as errors arch/mips/mipssim/sim_time.c: In function 'get_c0_compare_int': arch/mips/mipssim/sim_time.c:103: warning: ISO C90 forbids mixed declarations and code arch/mips/mipssim/sim_time.c:116: error: expected declaration or statement at end of input make[1]: *** [arch/mips/mipssim/sim_time.o] Error 1 Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Fix compile for !CONFIG_SMPAlexander Clouter
Commit fc03bc1715ca0ad4ccfe97aab16bcc9e7129c1a4 breaks compiling MIPS with SMP disabled. This patch fixes that. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Drop mmap_sem in pagefault oom pathAkinobu Mita
Fix the pagefault oom path which does not drop mm->mmap_sem. This was introduced by commit c7c1e3846bac1e4b8a8941f6a194812e28b0a519 Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Eleminate filenames from commentsRalf Baechle
They tend to get not updated when files are moved around or copied and lack any obvious use. While at it zap some only too obvious comments and as per Shinya's suggestion, add a copyright header to extable.c. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
2009-08-03[PATCH] MIPS: Cavium: Move swapped comments to their rightful place.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-30Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmaengine: at_hdmac: add DMA slave transfers dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller dmaengine: dmatest: correct thread_count while using multiple thread per channel dmaengine: dmatest: add a maximum number of test iterations drivers/dma: Remove unnecessary semicolons drivers/dma/fsldma.c: Remove unnecessary semicolons dmaengine: move HIGHMEM64G restriction to ASYNC_TX_DMA fsldma: do not clear bandwidth control bits on the 83xx controller fsldma: enable external start for the 83xx controller fsldma: use PCI Read Multiple command
2009-07-30Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx powerpc/86xx: Update GE Fanuc sbc310 default configuration powerpc/86xx: Update defconfig for GE Fanuc's PPC9A cpm_uart: Don't use alloc_bootmem in cpm_uart_cpm2.c powerpc/83xx: Fix PCI IO base address on MPC837xE-RDB boards powerpc/85xx: Don't scan for TBI PHY addresses on MPC8569E-MDS boards powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boards powerpc/mm: Fix SMP issue with MMU context handling code
2009-07-30lguest: update commentryRusty Russell
Every so often, after code shuffles, I need to go through and unbitrot the Lguest Journey (see drivers/lguest/README). Since we now use RCU in a simple form in one place I took the opportunity to expand that explanation. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
2009-07-30lguest: fix comment styleRusty Russell
I don't really notice it (except to begrudge the extra vertical space), but Ingo does. And he pointed out that one excuse of lguest is as a teaching tool, it should set a good example. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com>
2009-07-29powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxxKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29powerpc/86xx: Update GE Fanuc sbc310 default configurationMartyn Welch
General update of defconfig including the following notable changes: - Enable Highmem support. - Support for PCMCIA based daughter card. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29powerpc/86xx: Update defconfig for GE Fanuc's PPC9AMartyn Welch
General update of defconfig including the following notable changes: - Enable GPIO access via sysfs on GE Fanuc's PPC9A. - Enable Highmem support. - Support for PCMCIA based daughter card. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29powerpc/83xx: Fix PCI IO base address on MPC837xE-RDB boardsAnton Vorontsov
U-Boot maps PCI IO at 0xe0300000, while current dts files specify 0xe2000000. This leads to the following oops with CONFIG_8139TOO_PIO=y. 8139too Fast Ethernet driver 0.9.28 Machine check in kernel mode. Caused by (from SRR1=41000): Transfer error ack signal Oops: Machine check, sig: 7 [#1] MPC837x RDB [...] NIP [00000900] 0x900 LR [c0439df8] rtl8139_init_board+0x238/0x524 Call Trace: [cf831d90] [c0439dcc] rtl8139_init_board+0x20c/0x524 (unreliable) [cf831de0] [c043a15c] rtl8139_init_one+0x78/0x65c [cf831e40] [c0235250] pci_call_probe+0x20/0x30 [...] This patch fixes the issue by specifying the correct PCI IO base address. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29powerpc/85xx: Don't scan for TBI PHY addresses on MPC8569E-MDS boardsAnton Vorontsov
Sometimes (e.g. when there are no UEMs attached to a board) fsl_pq_mdio_find_free() fails to find a spare address for a TBI PHY, this is because get_phy_id() returns bogus 0x0000ffff values (0xffffffff is expected), and therefore mdio bus probing fails with the following message: fsl-pq_mdio: probe of e0082120.mdio failed with error -16 And obviously ethernet doesn't work after this. This patch solves the problem by adding tbi-phy node into mdio node, so that we won't scan for spare addresses, we'll just use a fixed one. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boardsAnton Vorontsov
Linux isn't able to detect link changes on ethernet ports that were used by U-Boot. This is because U-Boot wrongly clears interrupt polarity bit (INTPOL, 0x400) in the extended status register (EXT_SR, 0x1b) of Marvell PHYs. There is no easy way for PHY drivers to know IRQ line polarity (we could extract it from the device tree and pass it to phydevs, but that'll be quite a lot of work), so for now just reset the PHYs to their default states. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29powerpc/mm: Fix SMP issue with MMU context handling codeKumar Gala
In switch_mmu_context() if we call steal_context_smp() to get a context to use we shouldn't fall through and than call steal_context_up(). Doing so can be problematic in that the 'mm' that steal_context_up() ends up using will not get marked dirty in the stale_map[] for other CPUs that might have used that mm. Thus we could end up with stale TLB entries in the other CPUs that can cause all kinda of havoc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29Merge branch 'drm-radeon-kms' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-radeon-kms' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (35 commits) drm/radeon: set fb aperture sizes for framebuffer handoff. drm/ttm: fix highuser vs dma32 confusion. drm/radeon: Fix size used for benchmarking BO copies. drm/radeon: Add radeon.test parameter for running BO GPU copy tests. drm/radeon/kms: allow interruptible waits for objects. drm/ttm: powerpc: Fix Highmem cache flushing. x86: Export kmap_atomic_prot() needed for TTM. drm/ttm: Fix ttm in-kernel copying of pages with non-standard caching attributes. drm/ttm: Fix an oops and sync object leak. drm/radeon/kms: vram sizing on certain r100 chips needs workaround. drm/radeon: Pay more attention to object placement requested by userspace. drm/radeon: Fall back to evicting BOs with memcpy if necessary. drm/radeon: Don't unreserve twice on failure to validate. drm/radeon/kms: fix bandwidth computation on avivo hardware drm/radeon/kms: add initial colortiling support. drm/radeon/kms: fix hotspot handling on pre-avivo chips drm/radeon/kms: enable frac fb divs on rs600/rs690/rs740 drm/radeon/kms: add PLL flag to prefer frequencies <= the target freq drm/radeon/kms: block RN50 from using 3D engine. drm/radeon/kms: fix VRAM sizing like DDX does it. ...
2009-07-29x86: Export kmap_atomic_prot() needed for TTM.Thomas Hellstrom
This functionality is needed to kmap_atomic() highmem pages that may potentially have or are about to set up other mappings with non-standard caching attributes. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-27mm: Remove duplicate definitions in MIPS and SHBenjamin Herrenschmidt
Those definitions are already provided by asm-generic Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-27Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Makefile cleanup microblaze: Typo fix for cpu param inconsistency microblaze: Add support for R_MICROBLAZE_64_NONE microblaze: Get module loading working microblaze: remove sys_ipc microblaze: Support unaligned address for put/get_user macros microblaze: Detect new Microblaze 7.20 versions microblaze: Fix do_page_fault for no context microblaze: Add _PAGE_FILE macros to pgtable.h microblaze: Fix put_user macro for 64bits arguments microblaze: Clear print messages for DTB passing via r7 microblaze: Not to clear r7 after copying DTB to kernel microblaze: Add messages about FDT blob microblaze: Final support for statically linked DTB microblaze: remove duplicated #include microblaze: Define tlb_flush macro
2009-07-27Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: geode: Mark mfgpt irq IRQF_TIMER to prevent resume failure x86, amd: Don't probe for extended APIC ID if APICs are disabled x86, mce: Rename incorrect macro name "CONFIG_X86_THRESHOLD" x86-64: Fix bad_srat() to clear all state x86, mce: Fix set_trigger() accessor x86: Fix movq immediate operand constraints in uaccess.h x86: Fix movq immediate operand constraints in uaccess_64.h x86: Add reboot fixup for SBC-fitPC2 x86: Include all of .data.* sections in _edata on 64-bit x86: Add quirk for Intel DG45ID board to avoid low memory corruption
2009-07-27Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] zcrypt: fix scheduling of hrtimer ap_poll_timer [S390] vdso: clock_gettime of CLOCK_THREAD_CPUTIME_ID with noexec=on [S390] vdso: fix per cpu area allocation [S390] hibernation: fix register corruption on machine checks [S390] hibernation: fix lowcore handling
2009-07-27mm: Pass virtual address to [__]p{te,ud,md}_free_tlb()Benjamin Herrenschmidt
mm: Pass virtual address to [__]p{te,ud,md}_free_tlb() Upcoming paches to support the new 64-bit "BookE" powerpc architecture will need to have the virtual address corresponding to PTE page when freeing it, due to the way the HW table walker works. Basically, the TLB can be loaded with "large" pages that cover the whole virtual space (well, sort-of, half of it actually) represented by a PTE page, and which contain an "indirect" bit indicating that this TLB entry RPN points to an array of PTEs from which the TLB can then create direct entries. Thus, in order to invalidate those when PTE pages are deleted, we need the virtual address to pass to tlbilx or tlbivax instructions. The old trick of sticking it somewhere in the PTE page struct page sucks too much, the address is almost readily available in all call sites and almost everybody implemets these as macros, so we may as well add the argument everywhere. I added it to the pmd and pud variants for consistency. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Howells <dhowells@redhat.com> [MN10300 & FRV] Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-27microblaze: Makefile cleanupSam Ravnborg
Reviewed the Makefile on request by Michal and this is the resulting changes. o Use ':=' for assignmnet so we do not re-evaluate for each use o Use $(shell echo xxx) to remove "" o Replaced CFLAGS_KERNEL with KBUILD_CFLAGS The settings are equally relevant for modules and the linked kernel o Dropped LDFLAGS_BLOB - it is no longer used o Refactored assignmnets to libs-y and core-y o Use MMU for the MMU specific extension. "MMUEXT" was hurting my eyes and I did not wanted it spread to m68k Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27microblaze: Typo fix for cpu param inconsistencyMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27microblaze: Add support for R_MICROBLAZE_64_NONEMichal Simek
For example reiserfs use this relocation type. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27microblaze: Get module loading workingJohn Williams
New reloc type R_MICROBLAZE_32_PCREL_LO requires a null handler (no work to do). Remove legacy hack for broken linker pre gcc-4.1.1, that required us to extract an offset from the code, add it to the addend, then rewrite the instruction. Fixup the invalid reloc type error output. Boot tested with the xilinx_emaclite ethernet driver. Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27microblaze: remove sys_ipcArnd Bergmann
The ipc system call is now unused in microblaze, as the system call table points directly to the indidual system calls for IPC. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27microblaze: Support unaligned address for put/get_user macrosMichal Simek
This patch add support for cases where load/store instruction in put/get_user macro gets unaligned pointer to data and this address is not valid. I prevent all cases which can failed. I had to disable first stage of unaligned handler which is used only for noMMU kernel and the whole work is done when interrupt is enabled. You have enable HW support for detect unaligned access in Microblaze. This patch fixed three LTP tests: getpeername01, getsockname01, socketpair01 Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27microblaze: Detect new Microblaze 7.20 versionsMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27microblaze: Fix do_page_fault for no contextMichal Simek
Calling fixup when we are in kernel mode. This prevent fault for copy_to/from_user. This fault was find thanks to writev01/03/04 LTP tests. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27microblaze: Add _PAGE_FILE macros to pgtable.hMichal Simek
We need to define _PAGE_FILE macro and change pte functions. Microblaze use the same MMU as PowerPC that's why we define _PAGE_FILE in the same style. This change fixed remap_file_pages01 LTP test. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27microblaze: Fix put_user macro for 64bits argumentsMichal Simek
For 64bits arguments gcc caused that put_user macro works with wrong value because of optimalization. Adding volatile caused that gcc not optimized it. It is possible to use (as Blackfin do) two put_user macros with 32bits arguments but there is one more instruction which is due to duplication zero return value which is called put_user_asm macro. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27microblaze: Clear print messages for DTB passing via r7Michal Simek
It is necessary to zeroed r7 when r7 points to bad dtb - this caused that we have correct messages about compiled-in dtb or passing via r7 Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27microblaze: Not to clear r7 after copying DTB to kernelMichal Simek
I can't clear r7 because if I do it I lose information where DTB come from. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27microblaze: Add messages about FDT blobMichal Simek
Print accurate message about place where FDT blob is. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27microblaze: Final support for statically linked DTBJohn Williams
If r7 is zero at kernel boot, or does not point to a valid DTB, then we fall back to a DTB (assumed to be) linked statically in the kernel, instead of blindly copying bogus cruft into the kernel DTB memory region Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 00:46:42 +0000