summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2007-12-11[POWERPC] Use SLB size from the device treeMichael Neuling
Currently we hardwire the number of SLBs to 64, but PAPR says we should use the ibm,slb-size property to obtain the number of SLB entries. This uses this property instead of assuming 64. If no property is found, we assume 64 entries as before. This soft patches the SLB handler, so it shouldn't change performance at all. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] pci_controller->arch_data really is a struct device_node *Stephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Don't special case pci_domain_nr() for iSeriesStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Remove some iSeries platform checks from the PCI codeStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: hose->buid is always zero for iSeriesStephen Rothwell
so remove a firmware feature test. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Call iSeries_pcibios_init from setup_archStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Inline pci_setup_pci_controller as it has become trivialStephen Rothwell
and it becomes clear that we should use zalloc_maybe_bootmem. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Make pcibios_final_fixup not depend on pci_dnStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Reduce dependence on pci_dn bussubnoStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: iseries_ds_addr is only used in pci.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Remove pci_dn dependency from iSeries_Device_InformationStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Remove one layer of IO routinesStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Consoldiate PCI IO error checkStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Unindent and clean iSeries_pci_final_fixupStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Remove some dead code from pci.cStephen Rothwell
and an unnecessary cast. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: DeCamelCase pci.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Cleanup PCI retry code a littleStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Move find_Device_Node to avoid a forward declarationStephen Rothwell
Also remove another unnecessary forward declaration. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] pSeries: Remove dependency on pci_dn bussubnoStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iommu_free_table doesn't need the device_nodeStephen Rothwell
It only needs the iommu_table address. It also makes use of the node name to print error messages. So just pass it the things it needs. This reduces the places that know about the pci_dn by one. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] lparcfg: Remove useless buffer allocationNathan Lynch
The 'data' member of proc_ppc64_lparcfg is unused, but the lparcfg module's init routine allocates 4K for it. Remove the code which allocates and frees this buffer. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Update celleb_defconfig to add support for native CBEIshizaki Kou
Signed-off-by: Kou Ishizaki <Kou.Ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] celleb: Add support for native CBEIshizaki Kou
This adds support for native CBE on Celleb, that is, without the BEAT hypervisor. Many codes in platforms/cell/ are used in native CBE environment. Signed-off-by: Kou Ishizaki <Kou.Ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] cell: Fix undefined reference to mmio_nvram_initIshizaki Kou
This fixes the following link error with CONFIG_PPC_CELL_NATIVE=y and CONFIG_PPC_CELL_BLADE=n: arch/powerpc/platforms/built-in.o: In function `.cell_setup_arch': setup.c:(.init.text+0xe80): undefined reference to `.mmio_nvram_init' Signed-off-by: Kou Ishizaki <Kou.Ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] kernel_execve is identical in 32 and 64 bitStephen Rothwell
so consolidate it into misc.S. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Use of_register_driver to implement of_register_platform_driverStephen Rothwell
Also use of_unregister_driver to implement of_unregister_platform_driver. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-10Merge branch 'linux-2.6'Paul Mackerras
2007-12-07ibm_newemac: Cleanup/fix support for STACR register variantsBenjamin Herrenschmidt
There are a few variants of the STACR register that affect more than just the "AXON" version of EMAC. Replace the current test of various chip models with tests for generic properties in the device-tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-07ibm_newemac: Cleanup/Fix RGMII MDIO support detectionBenjamin Herrenschmidt
More than just "AXON" version of EMAC RGMII supports MDIO, so replace the current test with a generic property in the device-tree that indicates such support. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: [AVR32] Fix wrong pt_regs in critical exception handler [AVR32] Fix copy_to_user_page() breakage [AVR32] Follow the rules when dealing with the OCD system [AVR32] Clean up OCD register usage [AVR32] Implement irqflags trace and lockdep support [AVR32] Implement stacktrace support [AVR32] Kconfig: Use def_bool instead of bool + default [AVR32] Fix invalid status register bit definitions in asm/ptrace.h [AVR32] Add TIF_RESTORE_SIGMASK to the work masks
2007-12-07Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix memory controller register access when non-SMP.
2007-12-07[AVR32] Fix wrong pt_regs in critical exception handlerHaavard Skinnemoen
It's not like it really matters at this point since the system is dying anyway, but handle_critical pushes too few registers on the stack so the register dump, which makes the register dump look a bit strange. This patch fixes it. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-07[AVR32] Fix copy_to_user_page() breakageHaavard Skinnemoen
The current implementation of copy_to_user_page() gives "vaddr" to the cache instruction when trying to sync the icache with the dcache. If vaddr does not exist in the TLB, the CPU will silently abort the operation, which may result in the caches staying out of sync. To fix this, pass the "dst" parameter to flush_icache_range() instead -- we know this is valid because we just wrote to it. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-07[AVR32] Follow the rules when dealing with the OCD systemHaavard Skinnemoen
The current debug trap handling code does a number of things that are illegal according to the AVR32 Architecture manual. Most importantly, it may try to schedule from Debug Mode, thus clearing the D bit, which can lead to "undefined behaviour". It seems like this works in most cases, but several people have observed somewhat unstable behaviour when debugging programs, including soft lockups. So there's definitely something which is not right with the existing code. The new code will never schedule from Debug mode, it will always exit Debug mode with a "retd" instruction, and if something not running in Debug mode needs to do something debug-related (like doing a single step), it will enter debug mode through a "breakpoint" instruction. The monitor code will then return directly to user space, bypassing its own saved registers if necessary (since we don't actually care about the trapped context, only the one that came before.) This adds three instructions to the common exception handling code, including one branch. It does not touch super-hot paths like the TLB miss handler. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-07[AVR32] Clean up OCD register usageHaavard Skinnemoen
Generate a new set of OCD register definitions in asm/ocd.h and rename __mfdr() and __mtdr() to ocd_read() and ocd_write() respectively. The bitfield definitions are a lot more complete now, and they are entirely based on bit numbers, not masks. This is because OCD registers are frequently accessed from assembly code, where bit numbers are a lot more useful (can be fed directly to sbr, bfins, etc.) Bitfields that consist of more than one bit have two definitions: _START, which indicates the number of the first bit, and _SIZE, which indicates the number of bits. These directly correspond to the parameters taken by the bfextu, bfexts and bfins instructions. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-07[AVR32] Implement irqflags trace and lockdep supportHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-07[AVR32] Implement stacktrace supportHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-07[AVR32] Kconfig: Use def_bool instead of bool + defaultHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-07[AVR32] Fix invalid status register bit definitions in asm/ptrace.hHaavard Skinnemoen
The 'H' bit is bit 29, while the 'R' bit doesn't exist. Luckily, we don't actually use any of the bits in question. Also update show_regs() to show the Debug Mask and Debug state bits. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-07[SPARC64]: Fix memory controller register access when non-SMP.David S. Miller
get_cpu() always returns zero on non-SMP builds, but we really want the physical cpu number in this code in order to do the right thing. Based upon a non-SMP kernel boot failure report from Bernd Zeimetz. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-06Merge branch 'merge' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] virtex bug fix: Use canonical value for AC97 interrupt xparams [POWERPC] Update defconfigs [POWERPC] PS3: Update ps3_defconfig [POWERPC] Update iseries_defconfig [POWERPC] Fix hardware IRQ time accounting problem.
2007-12-07[POWERPC] virtex bug fix: Use canonical value for AC97 interrupt xparamsGrant Likely
The ml300 and ml403 xparameters.h files use different macros for the AC97 interrupt pin assignments. This normalizes them to a canonical value similar to what EDK generates for most other devices. This is needed to get ml300 support to compile in arch/ppc. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: suspend: old debugging hacks sneaked back Freezer: Fix JFFS2 garbage collector freezing issue (rev. 2) HWMON: coretemp, suspend fix Freezer: Fix APM emulation breakage Freezer: Fix s2disk resume from initrd
2007-12-06Pull suspend-2.6.24 into release branchLen Brown
2007-12-06ACPI: suspend: old debugging hacks sneaked backPavel Machek
Old debugging hack sneaked back during x86 merge, this removes it. Signed-off-by: Pavel Machek <pavel@suse.cz> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2007-12-06Merge branch 'for-2.6.24' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc * 'for-2.6.24' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: [POWERPC] Fix swapper_pg_dir size when CONFIG_PTE_64BIT=y on FSL_BOOKE
2007-12-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: [PARISC] lba_pci: pci_claim_resources disabled expansion roms [PARISC] print more than one character at a time for pdc console [PARISC] Update parisc-linux MAINTAINERS entries [PARISC] timer interrupt should not be IRQ_DISABLED Revert "[PARISC] import necessary bits of libgcc.a"
2007-12-06[POWERPC] Fix swapper_pg_dir size when CONFIG_PTE_64BIT=y on FSL_BOOKEKumar Gala
The size of swapper_pg_dir is 8k instead of 4k when using 64-bit PTEs (CONFIG_PTE_64BIT). This was reported by Cedric Hombourger <chombourger@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-06Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Oprofile: Fix computation of number of counters. [MIPS] Alchemy: fix IRQ bases [MIPS] Alchemy: replace ffs() with __ffs() [MIPS] BCM1480: Fix interrupt routing, take 2.
2007-12-06Tiny clean-up of OPROFILE/KPROBES configurationLinus Torvalds
Make the Kconfig.instrumentation file a bit easier on the eyes, and use the new ARCH_SUPPORTS_OPROFILE for x86[-64]. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 18:00:26 +0000