summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-05-11KVM: x86 emulator: Don't write-back cpu-state on X86EMUL_INTERCEPTEDJoerg Roedel
This patch prevents the changed CPU state to be written back when the emulator detected that the instruction was intercepted by the guest. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: add SVM interceptsAvi Kivity
Add intercept codes for instructions defined by SVM as interceptable. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: add framework for instruction interceptsAvi Kivity
When running in guest mode, certain instructions can be intercepted by hardware. This also holds for nested guests running on emulated virtualization hardware, in particular instructions emulated by kvm itself. This patch adds a framework for intercepting instructions. If an instruction is marked for interception, and if we're running in guest mode, a callback is called to check whether an intercept is needed or not. The callback is called at three points in time: immediately after beginning execution, after checking privilge exceptions, and after checking memory exception. This suits the different interception points defined for different instructions and for the various virtualization instruction sets. In addition, a new X86EMUL_INTERCEPT is defined, which any callback or memory access may define, allowing the more complicated intercepts to be implemented in existing callbacks. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: implement movdqu instruction (f3 0f 6f, f3 0f 7f)Avi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: SSE supportAvi Kivity
Add support for marking an instruction as SSE, switching registers used to the SSE register file. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: Specialize decoding for insns with 66/f2/f3 prefixesAvi Kivity
Most SIMD instructions use the 66/f2/f3 prefixes to distinguish between different variants of the same instruction. Usually the encoding is quite regular, but in some cases (including non-SIMD instructions) the prefixes generate very different instructions. Examples include XCHG/PAUSE, MOVQ/MOVDQA/MOVDQU, and MOVBE/CRC32. Allow the emulator to handle these special cases by splitting such opcodes into groups, with different decode flags and execution functions for different prefixes. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: define callbacks for using the guest fpu within the emulatorAvi Kivity
Needed for emulating fpu instructions. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: do not munge rep prefixAvi Kivity
Currently we store a rep prefix as 1 or 2 depending on whether it is a REPE or REPNE. Since sse instructions depend on the prefix value, store it as the original opcode to simplify things further on. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: 16-byte mmio supportAvi Kivity
Since sse instructions can issue 16-byte mmios, we need to support them. We can't increase the kvm_run mmio buffer size to 16 bytes without breaking compatibility, so instead we break the large mmios into two smaller 8-byte ones. Since the bus is 64-bit we aren't breaking any atomicity guarantees. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: Split mmio completion into a functionAvi Kivity
Make room for sse mmio completions. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: extend in-kernel mmio to handle >8 byte transactionsAvi Kivity
Needed for coalesced mmio using sse. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86: better fix for race between nmi injection and enabling nmi windowGleb Natapov
Fix race between nmi injection and enabling nmi window in a simpler way. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-05-11Revert "KVM: Fix race between nmi injection and enabling nmi window"Marcelo Tosatti
This reverts commit f86368493ec038218e8663cc1b6e5393cd8e008a. Simpler fix to follow. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-05-11KVM: expose async pf through our standard mechanismGlauber Costa
As Avi recently mentioned, the new standard mechanism for exposing features is KVM_GET_SUPPORTED_CPUID, not spamming CAPs. For some reason async pf missed that. So expose async_pf here. Signed-off-by: Glauber Costa <glommer@redhat.com> CC: Gleb Natapov <gleb@redhat.com> CC: Avi Kivity <avi@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: simplify NMI mask managementAvi Kivity
Use vmx_set_nmi_mask() instead of open-coding management of the hardware bit and the software hint (nmi_known_unmasked). There's a slight change of behaviour when running without hardware virtual NMI support - we now clear the NMI mask if NMI delivery faulted in that case as well. This improves emulation accuracy. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: SVM: Remove unused svm_featuresJan Kiszka
We use boot_cpu_has now. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Use cached VM_EXIT_INTR_INFO in handle_exceptionAvi Kivity
vmx_complete_atomic_exit() cached it for us, so we can use it here. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Don't VMREAD VM_EXIT_INTR_INFO unconditionallyAvi Kivity
Only read it if we're going to use it later. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Refactor vmx_complete_atomic_exit()Avi Kivity
Move the exit reason checks to the front of the function, for early exit in the common case. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Qualify check for host NMIAvi Kivity
Check for the exit reason first; this allows us, later, to avoid a VMREAD for VM_EXIT_INTR_INFO_FIELD. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Avoid vmx_recover_nmi_blocking() when unneededAvi Kivity
When we haven't injected an interrupt, we don't need to recover the nmi blocking state (since the guest can't set it by itself). This allows us to avoid a VMREAD later on. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Cache cplAvi Kivity
We may read the cpl quite often in the same vmexit (instruction privilege check, memory access checks for instruction and operands), so we gain a bit if we cache the value. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Optimize vmx_get_cpl()Avi Kivity
In long mode, vm86 mode is disallowed, so we need not check for it. Reading rflags.vm may require a VMREAD, so it is expensive. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Optimize vmx_get_rflags()Avi Kivity
If called several times within the same exit, return cached results. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: Use kvm_get_rflags() and kvm_set_rflags() instead of the raw versionsAvi Kivity
Some rflags bits are owned by the host, not guest, so we need to use kvm_get_rflags() to strip those bits away or kvm_set_rflags() to add them back. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-10MIPS: Alchemy: fix xxs1500 build errorManuel Lauss
This fixes: alchemy/xxs1500/init.c: In function 'prom_init': alchemy/xxs1500/init.c:57:17: error: ignoring return value of 'kstrtoul', declared with attribute warn_unused_result Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2340/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Invalidate old TLB mappings when updating huge page PTEs.David Daney
Without this, stale Icache or TLB entries may be used. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org https://patchwork.linux-mips.org/patch/2318/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Hibernation: Fixes for PAGE_SIZE >= 64kbWu Zhangjin
PAGE_SIZE >= 64kb (1 << 16) is too big to be the immediate of the addiu/daddiu instruction, so, use addu/daddu instruction instead. The following compiling error is fixed: AS arch/mips/power/hibernate.o arch/mips/power/hibernate.S: Assembler messages: arch/mips/power/hibernate.S:38: Error: expression out of range make[2]: *** [arch/mips/power/hibernate.o] Error 1 make[1]: *** [arch/mips/power] Error 2 Reported-by: Roman Mamedov <rm@romanrm.ru> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2313/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: JZ4740: Set one-shot feature flag for the clockeventLars-Peter Clausen
The code for supporting one-shot mode for the clockevent is already there, only the feature flag was not set. Setting the one-shot flag allows the kernel to run in tickless mode. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2261/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: JZ4740: Export symbols to the watchdog driver moduleRalf Baechle
MODPOST 356 modules ERROR: "jz4740_timer_disable_watchdog" [drivers/watchdog/jz4740_wdt.ko] undefine d! ERROR: "jz4740_timer_enable_watchdog" [drivers/watchdog/jz4740_wdt.ko] undefined ! make[1]: *** [__modpost] Error 1 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: JZ4740: Fix GCC 4.6.0 build error.Ralf Baechle
CC arch/mips/jz4740/dma.o arch/mips/jz4740/dma.c: In function 'jz4740_dma_chan_irq': arch/mips/jz4740/dma.c:245:11: error: variable 'status' set but not used [-Werro r=unused-but-set-variable] Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Audit: Fix success success argument pass to audit_syscall_exitRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Fix calc_vmlinuz_load_addr build warnings.Ralf Baechle
HOSTCC arch/mips/boot/compressed/calc_vmlinuz_load_addr arch/mips/boot/compressed/calc_vmlinuz_load_addr.c: In function 'main': arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:35:2: warning: format '%llx' expects type 'long long unsigned int *', but argument 3 has type 'uint64_t *' arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:54:2: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'uint64_t' Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Alchemy: Fix GCC 4.6.0 build error.Ralf Baechle
CC arch/mips/alchemy/devboards/db1x00/board_setup.o arch/mips/alchemy/devboards/db1x00/board_setup.c: In function 'board_setup': arch/mips/alchemy/devboards/db1x00/board_setup.c:130:6: error: variable 'pin_func' set but not used [-Werror=unused-but-set-variable] Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Document former use of timerfd(2) syscall number.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: IP27: Fix GCC 4.6.0 build error.Ralf Baechle
CC arch/mips/sgi-ip27/ip27-hubio.o arch/mips/sgi-ip27/ip27-hubio.c: In function 'hub_pio_map': arch/mips/sgi-ip27/ip27-hubio.c:32:20: error: variable 'junk' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: IP27: Fix GCC 4.6.0 build error.Ralf Baechle
CC arch/mips/sgi-ip27/ip27-hubio.o arch/mips/sgi-ip27/ip27-hubio.c: In function 'hub_pio_map': arch/mips/sgi-ip27/ip27-hubio.c:32:20: error: variable 'junk' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: bcm63xx: Fix header_crc comment in bcm963xx_tag.hJonas Gorski
The CRC32 actually includes the tag_version. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2275/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Octeon: Guard the Kconfig body with CPU_CAVIUM_OCTEONDavid Daney
Instead of making each Octeon specific option depend on CPU_CAVIUM_OCTEON, gate the body of the entire file with CPU_CAVIUM_OCTEON. With this change, CAVIUM_OCTEON_SPECIFIC_OPTIONS becomes useless, so get rid of it as well. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2091/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Octeon: Cleanup Kconfig IRQ_CPU* symbols.David Daney
Octeon doesn't use IRQ_CPU, so don't select it. IRQ_CPU_OCTEON is a completely unused symbol, remove it completely. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2086/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Rename .data..mostly and properly handle it in linker scriptCatalin Marinas
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: MSP: Fix build errorRalf Baechle
Reported and original patch by Yoichi Yuasa <yuasa@linux-mips.org>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: MSP71xx: Fix typo in msp_per_irq_controllerYoichi Yuasa
CC arch/mips/pmc-sierra/msp71xx/msp_irq_per.o arch/mips/pmc-sierra/msp71xx/msp_irq_per.c:101:2: error: expected identifier before '.' token make[2]: *** [arch/mips/pmc-sierra/msp71xx/msp_irq_per.o] Error 1 Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2246/ Cc: linux-mips <linux-mips@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Loongson: Fix GCC 2.6.0 build error.Ralf Baechle
CC arch/mips/loongson/common/env.o arch/mips/loongson/common/env.c: In function 'prom_init_env': arch/mips/loongson/common/env.c:50:12: error: variable 'ret' set but not used [-Werror=unused-but-set-variable] arch/mips/loongson/common/env.c:51:12: error: variable 'ret' set but not used [-Werror=unused-but-set-variable] arch/mips/loongson/common/env.c:52:12: error: variable 'ret' set but not used [-Werror=unused-but-set-variable] arch/mips/loongson/common/env.c:53:12: error: variable 'ret' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Jazz: Fix GCC 4.6.0 build errorRalf Baechle
CC arch/mips/jazz/jazzdma.o arch/mips/jazz/jazzdma.c: In function 'vdma_remap': arch/mips/jazz/jazzdma.c:214:20: error: variable 'npages' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: SNI: Fix GCC 4.6.0 build errorRalf Baechle
CC arch/mips/sni/time.o arch/mips/sni/time.c: In function 'dosample': arch/mips/sni/time.c:98:19: error: variable 'lsb' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Malta: Fix GCC 4.6.0 build errorRalf Baechle
CC arch/mips/mti-malta/malta-int.o arch/mips/mti-malta/malta-int.c: In function 'mips_pcibios_iack': arch/mips/mti-malta/malta-int.c:59:6: error: variable 'dummy' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Malta: Fix GCC 4.6.0 build errorRalf Baechle
CC arch/mips/mti-malta/malta-init.o arch/mips/mti-malta/malta-init.c: In function 'prom_init': arch/mips/mti-malta/malta-init.c:196:6: error: variable 'result' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: IP22: Fix GCC 4.6.0 build errorRalf Baechle
CC arch/mips/sgi-ip22/ip22-platform.o arch/mips/sgi-ip22/ip22-platform.c: In function 'sgiseeq_devinit': arch/mips/sgi-ip22/ip22-platform.c:135:15: error: variable 'tmp' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors While at it rename the variable to pbdma for readability; there is a local variable tmp of different type being used in two nested blocks. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: IP22: Fix GCC 4.6.0 build errorRalf Baechle
CC arch/mips/sgi-ip22/ip22-time.o arch/mips/sgi-ip22/ip22-time.c: In function 'dosample': arch/mips/sgi-ip22/ip22-time.c:35:10: error: variable 'lsb' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-22 15:29:43 +0000