summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-02-15ARC: Boot #1: low-level, setup_arch(), /proc/cpuinfo, mem initVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-02-15ARC: I/O and DMA MappingsVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-15ARC: Page Fault handlingVineet Gupta
This includes recent changes to make handler "retry" and/or "killable" The killable (early exit) logic is loosely based on how SH implements it return if SIGKILL + either of VM_FAULT_OOM or VM_FAULT_RETRY which is different from Hexagon implementation which would NOT early exit for SIGKILL + VM_FAULT_OOM + !VM_FAULT_RETRY credits: Non executable stack support from Simon Spooner Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-15ARC: TLB flush HandlingVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-15ARC: MMU Exception HandlingVineet Gupta
* MMU I-TLB / D-TLB Miss Exceptions - Fast Path TLB Refill Handler - slowpath TLB creation via do_page_fault() -> update_mmu_cache() * Duplicate PD Exception Handler Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-15ARC: MMU Context ManagementVineet Gupta
ARC700 MMU provides for tagging TLB entries with a 8-bit ASID to avoid having to flush the TLB every task switch. It also allows for a quick way to invalidate all the TLB entries for task useful for: * COW sementics during fork() * task exit()ing Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-15ARC: Page Table ManagementVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-15ARC: Cache Flush ManagementVineet Gupta
* ARC700 has VIPT L1 Caches * Caches don't snoop and are not coherent * Given the PAGE_SIZE and Cache associativity, we don't support aliasing D$ configurations (yet), but do allow aliasing I$ configs Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-15ARC: [Review] Prevent incorrect syscall restartsVineet Gupta
Per Al Viro's "signals for dummies" https://lkml.org/lkml/2012/12/6/366 there are 3 golden rules for (not) restarting syscalls: " What we need to guarantee is * restarts do not happen on signals caught in interrupts or exceptions * restarts do not happen on signals caught in sigreturn() * restart should happen only once, even if we get through do_signal() many times." ARC Port already handled #1, this patch fixes #2 and #3. We use the additional state in pt_regs->orig_r8 to ckh if restarting has already been done once. Thanks to Al Viro for spotting this. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Al Viro <viro@ZenIV.linux.org.uk>
2013-02-15ARC: [Review] Preparing to fix incorrect syscall restarts due to signalsVineet Gupta
To avoid multiple syscall restarts (multiple signals) or no restart at all (sigreturn), we need just an extra bit of state "literally 1 bit" in struct pt_regs. orig_r8 is the best place to do this, however given the way it is encoded currently, we can't add anything simplistically. Current orig_r8: * syscalls -> 1 to NR_SYSCALLS * Exceptions -> NR_SYSCALLS + 1 * Break-point-> NR_SYSCALLS + 2 In new scheme it is a bit-field * lower short word contains the exact event type (and a new bit to represent restart semantics : if syscall was already / can't be restarted) * upper short word optionally containing the syscall num - needed by likes of tracehooks etc This patch only changes how orig_r8 is organised and nothing should change behaviourily. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Al Viro <viro@ZenIV.linux.org.uk>
2013-02-15ARC: Signal handlingVineet Gupta
Includes following fixes courtesy review by Al-Viro * Tracer poke to Callee-regs were lost Before going off into do_signal( ) we save the user-mode callee regs (as they are not saved by default as part of pt_regs). This is to make sure that that a Tracer (if tracing related signal) is able to do likes of PEEKUSR(callee-reg). However in return path we were simply discarding the user-mode callee regs, which would break a POKEUSR(callee-reg) from a tracer. * Issue related to multiple syscall restarts are addressed in next patch Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Jonas Bonn <jonas@southpole.se>
2013-02-11ARC: Timers/counters/delay managementVineet Gupta
ARC700 includes 2 in-core 32bit timers TIMER0 and TIMER1. Both have exactly same capabilies. * programmable to count from TIMER<n>_CNT to TIMER<n>_LIMIT * for count 0 and LIMIT ~1, provides a free-running counter by auto-wrapping when limit is reached. * optionally interrupt when LIMIT is reached (oneshot event semantics) * rearming the interrupt provides periodic semantics * run at CPU clk ARC Linux uses TIMER0 for clockevent (periodic/oneshot) and TIMER1 for clocksource (free-running clock). Newer cores provide RTSC insn which gives a 64bit cpu clk snapshot hence is more apt for clocksource when available. SMP poses a bit of challenge for global timekeeping clocksource / sched_clock() backend: -TIMER1 based local clocks are out-of-sync hence can't be used (thus we default to jiffies based cs as well as sched_clock() one/both of which platform can override with it's specific hardware assist) -RTSC is only allowed in SMP if it's cross-core-sync (Kconfig glue ensures that) and thus usable for both requirements. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-02-11ARC: Process-creation/scheduling/idle-loopVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-02-11ARC: Syscall support (no-legacy-syscall ABI)Vineet Gupta
This includes support for generic clone/for/vfork/execve Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-02-11ARC: Non-MMU Exception HandlingVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-11ARC: Interrupt HandlingVineet Gupta
This contains: -bootup arch IRQ init: init_IRQ(), arc_init_IRQ() -generic IRQ subsystem glue: arch_do_IRQ() -basic IRQ chip setup for in-core intc Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-02-11ARC: Low level IRQ/Trap/Exception HandlingVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Al Viro <viro@ZenIV.linux.org.uk>
2013-02-11ARC: String libraryVineet Gupta
Hand optimised asm code for ARC700 pipeline. Originally written/optimized by Joern Rennecke Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Joern Rennecke <joern.rennecke@embecosm.com>
2013-02-11ARC: Spinlock/rwlock/mutex primitivesVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-02-11ARC: Fundamental ARCH data-types/definesVineet Gupta
* L1_CACHE_SHIFT * PAGE_SIZE, PAGE_OFFSET * struct pt_regs, struct user_regs_struct * struct thread_struct, cpu_relax(), task_pt_regs(), start_thread(), ... * struct thread_info, THREAD_SIZE, INIT_THREAD_INFO(), TIF_*, ... * BUG() * ELF_* * Elf_* To disallow user-space visibility into some of the core kernel data-types such as struct pt_regs, #ifdef __KERNEL__ which also makes the UAPI header spit (further patch in the series) to NOT export it to asm/uapi/ptrace.h Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Jonas Bonn <jonas.bonn@gmail.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-02-11ARC: Checksum/byteorder/swab routinesVineet Gupta
TBD: do_csum still needs to be written in asm Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-02-11ARC: [optim] uaccess __{get,put}_user() optimisedVineet Gupta
Override asm-generic implementations. We basically gain on 2 fronts * checks for alignment no longer needed as we are only doing "unit" sized copies. (Careful observer could argue that While the kernel buffers are aligned, the user buffer in theory might not be - however in that case the user space is already broken when it tries to deref a hword/word straddling word boundary - so we are not making it any worse). * __copy_{to,from}_user( ) returns bytes that couldn't be copied, whereas get_user() returns 0 for success or -EFAULT (not size). Thus the code to do leftover bytes calculation can be avoided as well. The savings were significant: ~17k of code. bloat-o-meter vmlinux_uaccess_pre vmlinux_uaccess_post add/remove: 0/4 grow/shrink: 8/118 up/down: 1262/-18758 (-17496) ^^^^^^^^^ Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-02-11ARC: uaccess friendsVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-11ARC: Atomic/bitops/cmpxchg/barriersVineet Gupta
This covers the UP / SMP (with no hardware assist for atomic r-m-w) as well as ARC700 LLOCK/SCOND insns based. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-11ARC: irqflags - Interrupt enabling/disabling at in-core intcVineet Gupta
ARC700 has an in-core intc which provides 2 priorities (a.k.a.) "levels" of interrupts (per IRQ) hencforth referred to as L1/L2 interrupts. CPU flags register STATUS32 has Interrupt Enable bits per level (E1/E2) to globally enable (or disable) all IRQs at a level. Hence the implementation of arch_local_irq_{save,restore,enable,disable}( ) The STATUS32 reg can be r/w only using the AUX Interface of ARC, hence the use of LR/SR instructions. Further, E1/E2 bits in there can only be updated using the FLAG insn. The intc supports 32 interrupts - and per IRQ enabling is controlled by a bit in the AUX_IENABLE register, hence the implmentation of arch_{,un}mask_irq( ) routines. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-02-11ARC: Build system: Makefiles, Kconfig, Linker scriptVineet Gupta
Arnd in his review pointed out that arch Kconfig organisation has several deficiencies: * Build time entries for things which can be runtime extracted from DT (e.g. SDRAM size, core clk frequency..) * Not multi-platform-image-build friendly (choice .. endchoice constructs) * cpu variants support (750/770) is exclusive. The first 2 have been fixed in subsequent patches. Due to the nature of the 750 and 770, it is not possible to build for both together, w/o special runtime glue code which would hurt performance. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2013-01-28ARC: Generic HeadersVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-01-24Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixlet from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Emulate dcbf
2013-01-24Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "A number of fixes: Patrik found a problem with preempt counting in the VFP assembly functions which can cause the preempt count to be upset. Nicolas fixed a problem with the parsing of the DT when it straddles a 1MB boundary. Subhash Jadavani reported a problem with sparsemem and our highmem support for cache maintanence for DMA areas, and TI found a bug in their strongly ordered memory mapping type. Also, three fixes by way of Will Deacon's tree from Dave Martin for instruction compatibility and Marc Zyngier to fix hypervisor boot mode issues." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7629/1: mm: Fix missing XN flag for for MT_MEMORY_SO ARM: DMA: Fix struct page iterator in dma_cache_maint() to work with sparsemem ARM: 7628/1: head.S: map one extra section for the ATAG/DTB area ARM: 7627/1: Predicate preempt logic on PREEMP_COUNT not PREEMPT alone ARM: virt: simplify __hyp_stub_install epilog ARM: virt: boot secondary CPUs through the right entry point ARM: virt: Avoid bx instruction for compatibility with <=ARMv4
2013-01-24Merge tag 'fixes-for-linus2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Here's a long-pending fixes pull request for arm-soc (I didn't send one in the -rc4 cycle). The larger deltas are from: - A fixup of error paths in the mvsdio driver - Header file move for a driver that hadn't been properly converted to multiplatform on i.MX, which was causing build failures when included - Device tree updates for at91 dealing mostly with their new pinctrl setup merged in 3.8 and mistakes in those initial configs The rest are the normal mix of small fixes all over the place; sunxi, omap, imx, mvebu, etc, etc." * tag 'fixes-for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits) mfd: vexpress-sysreg: Don't skip initialization on probe ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree ARM: vexpress: extend the MPIDR range used for pen release check ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfig ARM: at91/at91_dt_defconfig: remove memory specification to cmdline ARM: at91/dts: add macb mii pinctrl config for kizbox ARM: at91: rm9200: remake the BGA as default version ARM: at91: fix gpios on i2c-gpio for RM9200 DT ARM: at91/at91sam9x5 DTS: add SCK USART pins ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)arts ARM: at91/at91-pinctrl documentation: fix typo and add some details ARM: kirkwood: fix missing #interrupt-cells property mmc: mvsdio: use devm_ API to simplify/correct error paths. clk: mvebu/clk-cpu.c: fix memory leakage ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport ARM: OMAP2+: DT node Timer iteration fix ARM: OMAP2+: Fix section warning for omap_init_ocp2scp() ARM: OMAP2+: fix build break for omapdrm ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls ...
2013-01-24Merge branch 'vexpress/fixes' of git://git.linaro.org/people/pawelmoll/linux ↵Olof Johansson
into fixes From Pawel Moll: - makes the V2P-CA15_A7 (a.k.a. TC2) work with 3.8 kernels - improves vexpress-sysreg.c behaviour on arm64 platforms * 'vexpress/fixes' of git://git.linaro.org/people/pawelmoll/linux: mfd: vexpress-sysreg: Don't skip initialization on probe ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree ARM: vexpress: extend the MPIDR range used for pen release check
2013-01-24Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson
From Nicolas Ferre: Here are fixes for AT91 that are mainly related to device tree. One RM9200 setup option is the only C code change. Some documentation changes can clarify the pinctrl use. Then, some defconfig modifications are allowing the affected platforms to boot. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfig ARM: at91/at91_dt_defconfig: remove memory specification to cmdline ARM: at91/dts: add macb mii pinctrl config for kizbox ARM: at91: rm9200: remake the BGA as default version ARM: at91: fix gpios on i2c-gpio for RM9200 DT ARM: at91/at91sam9x5 DTS: add SCK USART pins ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)arts ARM: at91/at91-pinctrl documentation: fix typo and add some details
2013-01-24ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device TreePawel Moll
As the kernel is able to cope with multiple clusters, uncomment the A7 cores in the Device Tree for V2P-CA15_A7 tile, making all 5 cores available to the user. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2013-01-24ARM: vexpress: extend the MPIDR range used for pen release checkLorenzo Pieralisi
In ARM multi-cluster systems the MPIDR affinity level 0 cannot be used as a single cpu identifier, affinity levels 1 and 2 must be taken into account as well. This patch extends the MPIDR usage to affinity levels 1 and 2 in versatile secondary cores start up code in order to compare the passed pen_release value with the full-blown affinity mask. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2013-01-23Merge tag 'mvebu_fixes_for_v3.8-rc5' of ↵Olof Johansson
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: mvebu fixes for v3.8-rc5 - fix memory leak in mvebu/clk-cpu.c - use devm_ to correct/simplify error paths in mvsdio - add missing #interrupt-cells property in kirkwood * tag 'mvebu_fixes_for_v3.8-rc5' of git://git.infradead.org/users/jcooper/linux: ARM: kirkwood: fix missing #interrupt-cells property mmc: mvsdio: use devm_ API to simplify/correct error paths. clk: mvebu/clk-cpu.c: fix memory leakage
2013-01-23Merge tag 'usb-3.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull more USB fixes from Greg Kroah-Hartman: "Here are some more USB fixes for the 3.8-rc4 tree. Some gadget driver fixes, and finally resolved the ehci-mxc driver build issues (it's just some code moving around and being deleted)." * tag 'usb-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: EHCI: fix build error in ehci-mxc USB: EHCI: add a name for the platform-private field USB: EHCI: fix incorrect configuration test USB: EHCI: Move definition of EHCI_STATS to ehci.h USB: UHCI: fix IRQ race during initialization usb: gadget: FunctionFS: Fix missing braces in parse_opts usb: dwc3: gadget: fix ep->maxburst for ep0 ARM: i.MX clock: Change the connection-id for fsl-usb2-udc usb: gadget: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap usb: gadget: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id usb: musb: cppi_dma: drop '__init' annotation
2013-01-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fixes from Geert Uytterhoeven: "The asm-generic changeset has been ack'ed by Arnd." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Wire up finit_module asm-generic/dma-mapping-broken.h: Provide dma_alloc_attrs()/dma_free_attrs() m68k: Provide dma_alloc_attrs()/dma_free_attrs()
2013-01-23Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: - ELF coredump fix (more registers dumped than what user space expects) - SUBARCH name generation (s/aarch64/arm64/) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: makefile: fix uname munging when setting ARCH on native machine arm64: elf: fix core dumping to match what glibc expects
2013-01-23ARM: at91/dts: correct comment in at91sam9x5.dtsi for miiDouglas Gilbert
Concerning pinctrl_macb0_rmii_mii, values were okay, but not comments. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfigNicolas Ferre
Reported-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91_dt_defconfig: remove memory specification to cmdlineNicolas Ferre
No need for this cmdline option as we are using DT. Moreover this defconfig is targeted to multiple SoC/boards: this option was nonsense. Reported-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/dts: add macb mii pinctrl config for kizboxBoris BREZILLON
This patch overrides default macb pinctrl config defined in at91sam9260.dtsi (pinctrl_macb_rmii) with kizbox board config (pinctrl_macb_rmii + pinctrl_macb_rmii_mii_alt). Signed-off-by: Boris BREZILLON <linux-arm@overkiz.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91: rm9200: remake the BGA as default versionJean-Christophe PLAGNIOL-VILLARD
Make BGA as the default version as we are supposed to just have to specify when we use the PQFP version. Issue was existing since commit: 3e90772 (ARM: at91: fix at91rm9200 soc subtype handling). Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org> [v3.3] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91: fix gpios on i2c-gpio for RM9200 DTJoachim Eastwood
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91sam9x5 DTS: add SCK USART pinsRichard Genoud
The SCK pins where missing in usarts pinctrl. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)artsRichard Genoud
The PIN_BANK 3 is for PDxx pins, not PCxx pins. And PIN_BANK 1 is for PBxx, not PIN_BANK 0. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: kirkwood: fix missing #interrupt-cells propertySebastian Hesselbarth
The gpio controller on kirkwood can provide interrupts but is missing the #interrupt-cells property. This patch just adds it to both gpio controllers. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-22Merge tag 'perf-urgent-for-mingo' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf/urgent fixes from Arnaldo Carvalho de Melo: . revert 20b279 - require exclude_guest to use PEBS - kernel side, now older binaries will continue working for things like cycles:pp without needing to pass extra modifiers, from David Ahern. . Fix building from 'make perf-*-src-pkg' tarballs, broken by UAPI, from Sebastian Andrzej Siewior [ Pulling directly, Ingo would normally pull but has been unresponsive ] * tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Fix building from 'make perf-*-src-pkg' tarballs perf x86: revert 20b279 - require exclude_guest to use PEBS - kernel side
2013-01-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Improve the stability of the linux kernel on the parisc architecture" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: sigaltstack doesn't round ss.ss_sp as required parisc: improve ptrace support for gdb single-step parisc: don't claim cpu irqs more than once parisc: avoid undefined shift in cnv_float.h
2013-01-22Merge tag 'omap-for-v3.8-rc4/fixes-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Minimal omap fixes for the -rc series: - A build fix for recently merged omap DRM changes - Regression fixes from the common clock framework conversion for omap4 audio and omap2 reboot - Regression fix for pandaboard WLAN control UART muxing caused by u-boot only muxing essential pins nowadays - Timer iteration fix for CONFIG_OF_DYNAMIC - A section mismatch fix for ocp2scp init * tag 'omap-for-v3.8-rc4/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (306 commits) ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport ARM: OMAP2+: DT node Timer iteration fix ARM: OMAP2+: Fix section warning for omap_init_ocp2scp() ARM: OMAP2+: fix build break for omapdrm ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls ARM: OMAP4: hwmod_data: Correct IDLEMODE for McPDM ARM: OMAP4: clock data: Lock ABE DPLL on all revisions + Linux 3.8-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>