summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2013-06-10ACPI / video: Do not bind to device objects with a scan handlerRafael J. Wysocki
With the introduction of ACPI scan handlers, ACPI device objects with an ACPI scan handler attached to them must not be bound to by ACPI drivers any more. Unfortunately, however, the ACPI video driver attempts to do just that if there is a _ROM ACPI control method defined under a device object with an ACPI scan handler. Prevent that from happening by making the video driver's "add" routine check if the device object already has an ACPI scan handler attached to it and return an error code in that case. That is not sufficient, though, because acpi_bus_driver_init() would then clear the device object's driver_data that may be set by its scan handler, so for the fix to work acpi_bus_driver_init() has to be modified to leave driver_data as is on errors. References: https://bugzilla.kernel.org/show_bug.cgi?id=58091 Bisected-and-tested-by: Dmitry S. Demin <dmitryy.demin@gmail.com> Reported-and-tested-by: Jason Cassell <bluesloth600@gmail.com> Tracked-down-by: Aaron Lu <aaron.lu@intel.com> Cc: 3.9+ <stable@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com>
2013-06-07Revert "ACPI / scan: do not match drivers against objects having scan handlers"Rafael J. Wysocki
Commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers") introduced a boot regression on Tony's ia64 HP rx2600. Tony says: "It panics with the message: Kernel panic - not syncing: Unable to find SBA IOMMU: Try a generic or DIG kernel [...] my problem comes from arch/ia64/hp/common/sba_iommu.c where the code in sba_init() says: acpi_bus_register_driver(&acpi_sba_ioc_driver); if (!ioc_list) { but because of this change we never managed to call ioc_init() so ioc_list doesn't get set up, and we die." Revert it to avoid this breakage and we'll fix the problem it attempted to address later. Reported-by: Tony Luck <tony.luck@gmail.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-07Merge branch 'acpi-fixes'Rafael J. Wysocki
* acpi-fixes: ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization ACPI / scan: do not match drivers against objects having scan handlers ACPI / APEI: fix error return code in ghes_probe() ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6 ACPI / video: ignore BIOS initial backlight value for HP m4 x86 / platform / hp_wmi: Fix bluetooth_rfkill misuse in hp_wmi_rfkill_setup()
2013-06-07ACPI / PM: Do not execute _PS0 for devices without _PSC during initializationRafael J. Wysocki
Commit b378549 (ACPI / PM: Do not power manage devices in unknown initial states) added code to force devices without _PSC, but having _PS0 defined in the ACPI namespace, into ACPI power state D0 by executing _PS0 for them. That turned out to break Toshiba P870-303, however, so revert that code. References: https://bugzilla.kernel.org/show_bug.cgi?id=58201 Reported-and-tested-by: Jerome Cantenot <jerome.cantenot@gmail.com> Tracked-down-by: Lan Tianyu <tianyu.lan@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-05ACPI / scan: do not match drivers against objects having scan handlersAaron Lu
With the introduction of ACPI scan handlers, an ACPI device object with an ACPI scan handler attached to it must not be bound to an ACPI driver any more. Therefore it doesn't make sense to match those ACPI device objects against a newly registered ACPI driver in acpi_bus_match(), so make that function return 0 if the device object passed to it has an ACPI scan handler attached. This also addresses a regression related to a broken ACPI table in the BIOS, where it has defined a _ROM method under the PCI root bridge object. This causes the video module to treat that object as a display controller device (since only display devices are supposed to have a _ROM method defined according to the ACPI spec). As a result, the ACPI video driver binds to the PCI root bridge object and overwrites the previously assigned driver_data field of it, causing subsequent calls to acpi_get_pci_dev() to fail. [rjw: Subject and changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=58091 Reported-by: Jason Cassell <bluesloth600@gmail.com> Reported-and-bisected-by: Dmitry S. Demin <dmitryy.demin@gmail.com> Cc: 3.9+ <stable@kernel.org> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-05ACPI / APEI: fix error return code in ghes_probe()Wei Yongjun
Fix to return a negative error code in the acpi_gsi_to_irq() and request_irq() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-01ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6Ash Willis
This patch addresses kernel bug 56661. BIOS reports an incorrect backlight value, causing the driver to switch off the backlight completely during startup. This patch ignores the incorrect value from BIOS. References: https://bugzilla.kernel.org/show_bug.cgi?id=56661 Signed-off-by: Ash Willis <ashwillis@programmer.net> Cc: All <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-01ACPI / video: ignore BIOS initial backlight value for HP m4Alex Hung
On HP m4 lapops, BIOS reports minimum backlight on boot and causes backlight to dim completely. This ignores the initial backlight values and set to max brightness. References: https://bugs.launchpad.net/bugs/1184501 Cc: All <stable@vger.kernel.org> Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-30aerdrv: Move cper_print_aer() call out of interrupt contextLance Ortiz
The following warning was seen on 3.9 when a corrected PCIe error was being handled by the AER subsystem. WARNING: at .../drivers/pci/search.c:214 pci_get_dev_by_id+0x8a/0x90() This occurred because a call to pci_get_domain_bus_and_slot() was added to cper_print_pcie() to setup for the call to cper_print_aer(). The warning showed up because cper_print_pcie() is called in an interrupt context and pci_get* functions are not supposed to be called in that context. The solution is to move the cper_print_aer() call out of the interrupt context and into aer_recover_work_func() to avoid any warnings when calling pci_get* functions. Signed-off-by: Lance Ortiz <lance.ortiz@hp.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-05-25Merge tag 'pm+acpi-3.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: - Additional CPU ID for the intel_pstate driver from Dirk Brandewie. - More cpufreq fixes related to ARM big.LITTLE support and locking from Viresh Kumar. - VIA C7 cpufreq build fix from Rafał Bilski. - ACPI power management fix making it possible to use device power states regardless of the CONFIG_PM setting from Rafael J Wysocki. - New ACPI video blacklist item from Bastian Triller. * tag 'pm+acpi-3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: Add "Asus UL30A" to ACPI video detect blacklist cpufreq: arm_big_little_dt: Instantiate as platform_driver cpufreq: arm_big_little_dt: Register driver only if DT has valid data cpufreq / e_powersaver: Fix linker error when ACPI processor is a module cpufreq / intel_pstate: Add additional supported CPU ID cpufreq: Drop rwsem lock around CPUFREQ_GOV_POLICY_EXIT ACPI / PM: Allow device power states to be used for CONFIG_PM unset
2013-05-25Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dma fixes from Vinod Koul: "We have two patches from Andy & Rafael fixing the Lynxpoint dma" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: ACPI / LPSS: register clock device for Lynxpoint DMA properly dma: acpi-dma: parse CSRT to extract additional resources
2013-05-23Merge tag 'pci-v3.10-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Here are some more fixes for v3.10. The Moorestown update broke Intel Medfield devices, so I reverted it. The acpiphp change fixes a regression: we broke hotplug notifications to host bridges when we split acpiphp into the host-bridge related part and the endpoint-related part. Moorestown Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" Hotplug PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check" * tag 'pci-v3.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check
2013-05-23ACPI / video: Add "Asus UL30A" to ACPI video detect blacklistBastian Triller
Like on UL30VT, the ACPI video driver can't control backlight correctly on Asus UL30A. Vendor driver (asus-laptop) can work. This patch is to add "Asus UL30A" to ACPI video detect blacklist in order to use asus-laptop for video control on the "Asus UL30A" rather than ACPI video driver. Signed-off-by: Bastian Triller <bastian.triller@gmail.com> Cc: All <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-22ACPI / PM: Allow device power states to be used for CONFIG_PM unsetRafael J. Wysocki
Currently, drivers/acpi/device_pm.c depends on CONFIG_PM and all of the functions defined in there are replaced with static inline stubs if that option is unset. However, CONFIG_PM means, roughly, "runtime PM or suspend/hibernation support" and some of those functions are useful regardless of that. For example, they are used by the ACPI fan driver for controlling fans and acpi_device_set_power() is called during device removal. Moreover, device initialization may depend on setting device power states properly. For these reasons, make the routines manipulating ACPI device power states defined in drivers/acpi/device_pm.c available for CONFIG_PM unset too. Reported-by: Zhang Rui <rui.zhang@intel.com> Reported-and-tested-by: Michel Lespinasse <walken@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.9+ <stable@vger.kernel.org>
2013-05-17PCI: acpiphp: Re-enumerate devices when host bridge receives Bus CheckYinghai Lu
When a PCI host bridge device receives a Bus Check notification, we must re-enumerate starting with the bridge to discover changes (devices that have been added or removed). Prior to 668192b678 ("PCI: acpiphp: Move host bridge hotplug to pci_root.c"), this happened in _handle_hotplug_event_bridge(). After that commit, _handle_hotplug_event_bridge() is not installed for host bridges, and the host bridge notify handler, _handle_hotplug_event_root() did not re-enumerate. This patch adds re-enumeration to _handle_hotplug_event_root(). This fixes cases where we don't notice the addition or removal of PCI devices, e.g., the PCI-to-USB ExpressCard in the bugzilla below. [bhelgaas: changelog, references] Reference: https://lkml.kernel.org/r/CAAh6nkmbKR3HTqm5ommevsBwhL_u0N8Rk7Wsms_LfP=nBgKNew@mail.gmail.com Reference: https://bugzilla.kernel.org/show_bug.cgi?id=57961 Reported-by: Gavin Guo <tuffkidtt@gmail.com> Tested-by: Gavin Guo <tuffkidtt@gmail.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.9+
2013-05-15ACPI / scan: Fix memory leak on acpi_scan_init_hotplug() error pathCatalin Marinas
Following commit 6b772e8f9 (ACPI: Update PNPID match handling for notify), the acpi_scan_init_hotplug() calls acpi_set_pnp_ids() which allocates acpi_hardware_id and copies a few strings (kstrdup). If the devices does not have hardware_id set, the function exits without freeing the previously allocated ids (and kmemleak complains). This patch calls simply changes 'return' on error to a 'goto out' which calls acpi_free_pnp_ids(). Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-14ACPI / LPSS: register clock device for Lynxpoint DMA properlyRafael J. Wysocki
The DMA controller in Lynxpoint is enumerated as a regular ACPI device now. To work properly it is using the LPSS root clock as a functional clock. That's why we have to register the clock device accordingly to the ACPI ID of the DMA controller. The acpi_lpss.c module is responsible to do the job. This patch also removes hardcoded name of the DMA device in clk-lpt.c and the name of the root clock in acpi_lpss.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-05-14dma: acpi-dma: parse CSRT to extract additional resourcesAndy Shevchenko
Since we have CSRT only to get additional DMA controller resources, let's get rid of drivers/acpi/csrt.c and move its logic inside ACPI DMA helpers code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-05-12ACPI / AC: Add sleep quirk for Thinkpad e530Lan Tianyu
The Thinkpad e530's BIOS notifies the AC device first and then sleeps for certain amount of time before doing real work in the EC event handler (_Qxx): Method (_Q27, 0, NotSerialized) { Notify (AC, 0x80) Sleep (0x03E8) Store (Zero, PWRS) PNOT () } This causes the AC driver to report an outdated AC state to user space, because it reads the state information from the device while the EC handler is sleeping. Introduce a quirk to cause the AC driver to wait in acpi_ac_notify() before calling acpi_ac_get_state() on systems known to have this problem and add Thinkpad e530 to the list of quirky machines (with a 1s delay which has been verified to be sufficient for that machine). [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=45221 Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-12ACPI / EC: Restart transaction even when the IBF flag setLan Tianyu
The EC driver works abnormally with IBF flag always set. IBF means "The host has written a byte of data to the command or data port, but the embedded controller has not yet read it". If IBF is set in the EC status and not cleared, this will cause all subsequent EC requests to fail with a timeout error. Change the EC driver so that it doesn't refuse to restart a transaction if IBF is set in the status. Also increase the number of transaction restarts to 5, as it turns out that 2 is not sufficient in some cases. This bug happens on several different machines (Asus V1S, Dell Latitude E6530, Samsung R719, Acer Aspire 5930G, Sony Vaio SR19VN and others). [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=14733 References: https://bugzilla.kernel.org/show_bug.cgi?id=15560 References: https://bugzilla.kernel.org/show_bug.cgi?id=15946 References: https://bugzilla.kernel.org/show_bug.cgi?id=42945 References: https://bugzilla.kernel.org/show_bug.cgi?id=48221 Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: All <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-12ACPI video: ignore BIOS initial backlight value for HP 1000Alex Hung
On HP 1000 lapops, BIOS reports minimum backlight on boot and causes backlight to dim completely. This ignores the initial backlight values and set to max brightness. References:: https://bugs.launchpad.net/bugs/1167760 Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-12ACPI / PM: Move processor suspend/resume to syscore_opsRafael J. Wysocki
The system suspend routine of the ACPI processor driver saves the BUS_MASTER_RLD register and its resume routine restores it. However, there can be only one such register in the system and it really should be saved after non-boot CPUs have been offlined and restored before they are put back online during resume. For this reason, move the saving and restoration of BUS_MASTER_RLD to syscore suspend and syscore resume, respectively, and drop the no longer necessary suspend/resume callbacks from the ACPI processor driver. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-09Merge tag 'acpi-fixes-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPICA fixes from Rafael Wysocki: - _INI regression fix from Tomasz Nowicki. - Fix for a possible memory leak in _OSI support routine from Jung-uk Kim. - Fix for a possible buffer overflow during field unit read operation from Bob Moore. * tag 'acpi-fixes-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: ACPICA: Fix for _INI regression ACPICA: _OSI support: Fix possible memory leak ACPICA: Fix possible buffer overflow during a field unit read operation
2013-05-08ACPICA: ACPICA: Fix for _INI regressionTomasz Nowicki
This change fixes a problem introduced by recent commit c34c82b (ACPICA: Predefine names: Add allowed argument types to master info table) in 20130328 where _INI methods are no longer executed properly because of a memory block that is not initialized properly. ACPICA BZ1016. Tomasz Nowicki <tomasz.nowicki@linaro.org> References: https://bugs.acpica.org/show_bug.cgi?id=1016 Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-08ACPICA: _OSI support: Fix possible memory leakJung-uk Kim
Fixes a possible memory leak in the error exit path introduced by recent commit 388a990 ("ACPICA: _OSI Support: handle any errors from acpi_os_acquire_mutex()"). [rjw: Changelog] Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-08ACPICA: Fix possible buffer overflow during a field unit read operationBob Moore
Can only happen under these conditions: 1) The DSDT version is 1, meaning integers are 32-bits. 2) The field is between 33 and 64 bits long. It applies cleanly back to ACPICA 20100806+ (Linux v2.6.37+). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: 2.6.37+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-05-01proc: Supply a function to remove a proc entry by PDEDavid Howells
Supply a function (proc_remove()) to remove a proc entry (and any subtree rooted there) by proc_dir_entry pointer rather than by name and (optionally) root dir entry pointer. This allows us to eliminate all remaining pde->name accesses outside of procfs. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Grant Likely <grant.likely@linaro.or> cc: linux-acpi@vger.kernel.org cc: openipmi-developer@lists.sourceforge.net cc: devicetree-discuss@lists.ozlabs.org cc: linux-pci@vger.kernel.org cc: netdev@vger.kernel.org cc: netfilter-devel@vger.kernel.org cc: alsa-devel@alsa-project.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-30Merge tag 'pm+acpi-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael J Wysocki: - ARM big.LITTLE cpufreq driver from Viresh Kumar. - exynos5440 cpufreq driver from Amit Daniel Kachhap. - cpufreq core cleanup and code consolidation from Viresh Kumar and Stratos Karafotis. - cpufreq scalability improvement from Nathan Zimmer. - AMD "frequency sensitivity feedback" powersave bias for the ondemand cpufreq governor from Jacob Shin. - cpuidle code consolidation and cleanups from Daniel Lezcano. - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano. - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto. - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle, Yasuaki Ishimatsu, and Rafael J Wysocki. - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from Rafael J Wysocki and Andy Shevchenko. * tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits) cpufreq: Revert incorrect commit 5800043 cpufreq: MAINTAINERS: Add co-maintainer cpuidle: add maintainer entry ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points ARM: s3c64xx: cpuidle: use init/exit common routine cpufreq: pxa2xx: initialize variables ACPI: video: correct acpi_video_bus_add error processing SH: cpuidle: use init/exit common routine ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y ACPI: Fix wrong parameter passed to memblock_reserve cpuidle: fix comment format pnp: use %*phC to dump small buffers isapnp: remove debug leftovers ARM: imx: cpuidle: use init/exit common routine ARM: davinci: cpuidle: use init/exit common routine ARM: kirkwood: cpuidle: use init/exit common routine ARM: calxeda: cpuidle: use init/exit common routine ARM: tegra: cpuidle: use init/exit common routine for tegra3 ARM: tegra: cpuidle: use init/exit common routine for tegra2 ARM: OMAP4: cpuidle: use init/exit common routine ...
2013-04-29Merge tag 'pci-v3.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.10 merge window: PCI device hotplug - Remove ACPI PCI subdrivers (Jiang Liu, Myron Stowe) - Make acpiphp builtin only, not modular (Jiang Liu) - Add acpiphp mutual exclusion (Jiang Liu) Power management - Skip "PME enabled/disabled" messages when not supported (Rafael Wysocki) - Fix fallback to PCI_D0 (Rafael Wysocki) Miscellaneous - Factor quirk_io_region (Yinghai Lu) - Cache MSI capability offsets & cleanup (Gavin Shan, Bjorn Helgaas) - Clean up EISA resource initialization and logging (Bjorn Helgaas) - Fix prototype warnings (Andy Shevchenko, Bjorn Helgaas) - MIPS: Initialize of_node before scanning bus (Gabor Juhos) - Fix pcibios_get_phb_of_node() declaration "weak" annotation (Gabor Juhos) - Add MSI INTX_DISABLE quirks for AR8161/AR8162/etc (Xiong Huang) - Fix aer_inject return values (Prarit Bhargava) - Remove PME/ACPI dependency (Andrew Murray) - Use shared PCI_BUS_NUM() and PCI_DEVID() (Shuah Khan)" * tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) vfio-pci: Use cached MSI/MSI-X capabilities vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Remove "extern" from function declarations PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h PCI: Use msix_table_size() directly, drop multi_msix_capable() PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros PCI: Drop is_64bit_address() and is_mask_bit_support() macros PCI: Drop msi_data_reg() macro PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc PCI: Clean up MSI/MSI-X capability #defines PCI: Use cached MSI-X cap while enabling MSI-X PCI: Use cached MSI cap while enabling MSI interrupts PCI: Remove MSI/MSI-X cap check in pci_msi_check_device() PCI: Cache MSI/MSI-X capability offsets in struct pci_dev PCI: Use u8, not int, for PM capability offset [SCSI] megaraid_sas: Use correct #define for MSI-X capability PCI: Remove "extern" from function declarations ...
2013-04-28Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: (51 commits) cpuidle: add maintainer entry ARM: s3c64xx: cpuidle: use init/exit common routine SH: cpuidle: use init/exit common routine cpuidle: fix comment format ARM: imx: cpuidle: use init/exit common routine ARM: davinci: cpuidle: use init/exit common routine ARM: kirkwood: cpuidle: use init/exit common routine ARM: calxeda: cpuidle: use init/exit common routine ARM: tegra: cpuidle: use init/exit common routine for tegra3 ARM: tegra: cpuidle: use init/exit common routine for tegra2 ARM: OMAP4: cpuidle: use init/exit common routine ARM: shmobile: cpuidle: use init/exit common routine ARM: tegra: cpuidle: use init/exit common routine ARM: OMAP3: cpuidle: use init/exit common routine ARM: at91: cpuidle: use init/exit common routine ARM: ux500: cpuidle: use init/exit common routine cpuidle: make a single register function for all ARM: ux500: cpuidle: replace for_each_online_cpu by for_each_possible_cpu cpuidle: remove en_core_tk_irqen flag ARM: OMAP3: remove cpuidle_wrap_enter ...
2013-04-28Merge branch 'acpi-assorted'Rafael J. Wysocki
* acpi-assorted: (21 commits) ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points ACPI: video: correct acpi_video_bus_add error processing ACPI: Fix wrong parameter passed to memblock_reserve acpi: video: enhance the quirk detect logic of _BQC ACPI: update comments for acpi_event_status ACPI: remove "config ACPI_DEBUG_FUNC_TRACE" PCI / ACPI: Don't query OSC support with all possible controls ACPI / processor_thermal: avoid null pointer deference error ACPI / fan: avoid null pointer deference error ACPI / video: Fix applying indexed initial brightness value. ACPI / video: Make logic a little easier to understand. ACPI / video: Fix brightness control initialization for some laptops. ACPI: Use resource_size() in osl.c ACPI / acpi_pad: Used PTR_RET ACPI: suppress compiler warning in container.c ACPI: suppress compiler warning in battery.c ACPI: suppress compiler warnings in processor_throttling.c ACPI: suppress compiler warnings in button.c ACPI: replace kmalloc+memcpy with kmemdup ACPI: Remove acpi_pci_bind_root() definition ...
2013-04-28Merge branch 'acpi-pm'Rafael J. Wysocki
* acpi-pm: ACPI / PM: Expose lists of device wakeup power resources to user space ACPI / PM: Fix potential problem in acpi_device_get_power()
2013-04-28Merge branch 'acpica'Rafael J. Wysocki
* acpica: (33 commits) ACPICA: Update version to 20130328 ACPICA: Add a lock to the internal object reference count mechanism ACPICA: Fix a format string for 64-bit generation ACPICA: Remove FORCE_DELETE option for global reference count mechanism ACPICA: Improve error message for Index() operator ACPICA: FADT: Remove extraneous warning for very large GPE registers ACPICA: Fix a typo in a function header, no functional change ACPICA: Fix a typo in an error message ACPICA: Fix for some comments/headers ACPICA: _OSI Support: handle any errors from acpi_os_acquire_mutex() ACPICA: Predefine names: Add allowed argument types to master info table ACPI: Set length even for TYPE_END_TAG acpi resource ACPICA: Update version to 20130214 ACPICA: Object repair: Allow 0-length packages for variable-length packages ACPICA: Disassembler: Add warnings for unresolved control methods ACPICA: Return object repair: Add resource template repairs ACPICA: Return object repair: Add string-to-unicode conversion ACPICA: Split object conversion functions to a new file ACPICA: Add mechanism for early object repairs on a per-name basis ACPICA: Remove trailing comma in enum declarations ...
2013-04-28Merge branch 'acpi-lpss'Rafael J. Wysocki
* acpi-lpss: ACPI / LPSS: make code less confusing for reader ACPI / LPSS: Add support for exposing LTR registers to user space ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices
2013-04-28Merge branch 'acpi-hotplug'Rafael J. Wysocki
* acpi-hotplug: ACPI / memhotplug: Remove info->failed bit ACPI / memhotplug: set info->enabled for memory present at boot time ACPI: Verify device status after eject acpi: remove reference to ACPI_HOTPLUG_IO ACPI: Update _OST handling for notify ACPI: Update PNPID match handling for notify ACPI: Update PNPID set/free interfaces ACPI: Remove acpi_device dependency in acpi_device_set_id() ACPI / hotplug: Make acpi_hotplug_profile_ktype static ACPI / scan: Make memory hotplug driver use struct acpi_scan_handler ACPI / container: Use hotplug profile user space interface ACPI / hotplug: Introduce user space interface for hotplug profiles ACPI / scan: Introduce acpi_scan_handler_matching() ACPI / container: Use common hotplug code ACPI / scan: Introduce common code for ACPI-based device hotplug ACPI / scan: Introduce acpi_scan_match_handler()
2013-04-26ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip ↵Zhang Rui
points Commit 4ae46be "Thermal: Introduce thermal_zone_trip_update()" introduced a regression causing the fan to be always on even when the system is idle. My original idea in that commit is that: - when the current temperature is above the trip point, keep the fan on, even if the temperature is dropping. - when the current temperature is below the trip point, turn on the fan when the temperature is raising, turn off the fan when the temperature is dropping. But this is what the code actually does: - when the current temperature is above the trip point, the fan keeps on. - when the current temperature is below the trip point, the fan is always on because thermal_get_trend() in driver/acpi/thermal.c returns THERMAL_TREND_RAISING. Thus the fan keeps running even if the system is idle. Fix this in drivers/acpi/thermal.c. [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=56591 References: https://bugzilla.kernel.org/show_bug.cgi?id=56601 References: https://bugzilla.kernel.org/show_bug.cgi?id=50041#c45 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Matthias <morpheusxyz123@yahoo.de> Tested-by: Ville Syrjälä <syrjala@sci.fi> Cc: 3.7+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-25ACPI: video: correct acpi_video_bus_add error processingAaron Lu
acpi_video_bus_get_devices() may fail due to some video output device doesn't have the _ADR method, and in this case, the error processing is to simply free the video structure in acpi_video_bus_add(), while leaving those already registered video output devices in the wild, which means for some video output device, we have already registered a backlight interface and installed a notification handler for it. So it can happen when user is using this system, on hotkey pressing, the notification handler will send a keycode through a non-existing input device, causing kernel freeze. To solve this problem, free all those already registered video output devices once something goes wrong in acpi_video_bus_get_devices(), so that no wild backlight interfaces and notification handlers exist. References: https://bugzilla.kernel.org/show_bug.cgi?id=51731 Reported-and-tested-by: <i-tek@web.de> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-24ACPI: Fix wrong parameter passed to memblock_reserveWang YanQing
Commit 53aac44 (ACPI: Store valid ACPI tables passed via early initrd in reserved memblock areas) introduced acpi_initrd_override() that passes a wrong value as the second argument to memblock_reserve(). Namely, the second argument of memblock_reserve() is the size of the region, not the address of the top of it, so make acpi_initrd_override() pass the size in there as appropriate. [rjw: Changelog] Signed-off-by: Wang YanQing <udknight@gmail.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: 3.8+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-23cpuidle: remove en_core_tk_irqen flagDaniel Lezcano
The en_core_tk_irqen flag is set in all the cpuidle driver which means it is not necessary to specify this flag. Remove the flag and the code related to it. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> # for mach-omap2/* Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-22acpi: video: enhance the quirk detect logic of _BQCAaron Lu
Currently we decide if the _BQC is using index by first setting the level to maximum, and then check if _BQC returned maximum; if not, we say it is using index. This is not true for some buggy systems, where the _BQC method will always return a constant value(e.g. 0 or 100 for the two broken system) and thus break the current logic. So this patch tries to enhance the quirk detect logic for _BQC: we do this by picking a test_level, it can be the maximum level or the mininum one based on some condition. And we don't make the assumption that if _BQC returned a value that is not what we just set, it must be using an index. Instead, we will compare the value returned from _BQC and if it doesn't match, see if the returned value is an index. And if still no, clear the capability of _BQC. References: https://bugzilla.kernel.org/show_bug.cgi?id=42861 References: https://bugzilla.kernel.org/show_bug.cgi?id=56011 Reported-and-tested-by: Artem Savkov <artem.savkov@gmail.com> Reported-by: Luis Medinas <lmedinas@gmail.com> Reported-by: Cheppes <cheppes@mailinator.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-16PCI/ACPI: Remove support of ACPI PCI subdriversMyron Stowe
Both sub-drivers of the "PCI Root Bridge ("pci_bridge")" driver, "acpiphp" and "pci_slot", have been converted to hook directly into the PCI core. With the conversions there are no remaining usages of the 'struct acpi_pci_driver' list based infrastructure. This patch removes it. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com>
2013-04-12PCI/ACPI: Handle PCI slot devices when creating/destroying PCI busesJiang Liu
Currently the pci_slot driver doesn't update PCI slot devices when PCI device hotplug event happens, which may cause memory leak and returning stale information to user. Now the pci_slot driver has been changed as built-in driver, so invoke PCI slot enumeration and destroy routines directly from the PCI core. And remove ACPI PCI sub-driver related code because it isn't needed any more. [bhelgas: removed "extern" from function declarations] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com>
2013-04-12ACPICA: Add a lock to the internal object reference count mechanismBob Moore
Certain external interfaces need to update object references without holding the interpreter or namespace mutex objects. To prevent race conditions, add a spinlock around the increment and decrement of the reference counts for internal ACPI objects. Reported by Andriy Gapon (avg@FreeBSD.org). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Andriy Gapon <avg@FreeBSD.org> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-12ACPICA: Fix a format string for 64-bit generationBob Moore
Fix a warning on 64-bit for a length value. Cast to 32-bit since the length is related to an ACPI table. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-12ACPICA: Remove FORCE_DELETE option for global reference count mechanismBob Moore
This option is not used and is obsolete. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-12ACPICA: Improve error message for Index() operatorBob Moore
For the case where an attempt is made to take an Index() beyond the end of a String, Buffer, or Package, emit the actual length of the object to the error message. Helpful for debugging. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-12ACPICA: FADT: Remove extraneous warning for very large GPE registersLinn Crosetto
This change removes a size mismatch warning if the legacy length field for a GPE register set is larger than the 64-bit GAS structure can accomodate. GPE register sets can be larger than the 255 bit limitation of the GAS structure. Linn Crosetto (linn@hp.com). Signed-off-by: Linn Crosetto <linn@hp.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-12ACPICA: Fix a typo in a function header, no functional changeColin Ian King
Reported by Colin King. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-12ACPICA: Fix a typo in an error messageColin Ian King
Remove an extraneous minus/dash. Reported by Colin Ian King. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>