summaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2006-12-16[PATCH] pata_via: Cable detect errorAlan
The UDMA66 VIA hardware has no controller side cable detect bits we can use. This patch minimally fixes the problem by reporting unknown in this case and using drive side detection. The old drivers/ide code does some additional tricks but those aren't appropriate now we are in -rc. Without this update UDMA66 via controllers run slowly. They don't fail so it's a borderline call whether this is -rc material or not. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] Fix help text for CONFIG_ATA_PIIXAlan
> Thanks for clarifying Bill, and sorry Alan. ata_piix does indeed work > correctly. The help text is a bit confusing: > > config ATA_PIIX > tristate "Intel PIIX/ICH SATA support" > depends on PCI > help > This option enables support for ICH5/6/7/8 Serial ATA. > If PATA support was enabled previously, this enables > support for select Intel PIIX/ICH PATA host controllers. New help text Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] initializer entry defined twice in pata_rz1000Ira Snyder
This removes the extra definition of the .error_handler member in the pata_rz1000 driver. Signed-off-by: Ira W. Snyder <kernel@irasnyder.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] ata: fix platform_device_register_simple() error checkAkinobu Mita
The return value of platform_device_register_simple() should be checked by IS_ERR(). Cc: Jeff Garzik <jgarzik@pobox.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] ahci: do not mangle saved HOST_CAP while resetting controllerTejun Heo
Do not mangle with HOST_CAP while resetting controller. The code is there for a historical reason. The mangling breaks controller feature detection and 0 PORTS_IMPL workaround code. This problem was spotted by Manoj Kasichainula. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Manoj Kasichainula <manoj@io.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)Tejun Heo
Calling sg_init_one() with NULL buf causes oops on certain configurations. Don't initialize sg in ata_exec_internal() if DMA_NONE and make the function complain if @buf is NULL when dma_dir isn't DMA_NONE. While at it, fix comment. The problem is discovered and initial patch was submitted by Arnd Bergmann. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)Jeff Garzik
Current Broadcom/Serverworks SATA boards (including Apple K2 SATA) have problems with ATAPI DMA, so it is disabled. ATAPI PIO, ATA PIO, and ATA DMA continue to work just fine. Acked-by: Anantha Subramanyam <ananth@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[libata] use kmap_atomic(KM_IRQ0) in SCSI simulatorJeff Garzik
We are inside spin_lock_irqsave(). quoth akpm's debug facility: [ 231.948000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 232.232000] ata1.00: configured for UDMA/33 [ 232.404000] WARNING (1) at arch/i386/mm/highmem.c:47 kmap_atomic() [ 232.404000] [<c01162e6>] kmap_atomic+0xa9/0x1ab [ 232.404000] [<c0242c81>] ata_scsi_rbuf_get+0x1c/0x30 [ 232.404000] [<c0242caf>] ata_scsi_rbuf_fill+0x1a/0x87 [ 232.404000] [<c0243ab2>] ata_scsiop_mode_sense+0x0/0x309 [ 232.404000] [<c01729d5>] end_bio_bh_io_sync+0x0/0x37 [ 232.404000] [<c02311c6>] scsi_done+0x0/0x16 [ 232.404000] [<c02311c6>] scsi_done+0x0/0x16 [ 232.404000] [<c0242dcc>] ata_scsi_simulate+0xb0/0x13f [...] Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] ata_piix: use piix_host_stop() in ich_pata_opsTejun Heo
piix_init_one() allocates host private data which should be freed by piix_host_stop(). ich_pata_ops wasn't converted to piix_host_stop() while merging, leaking 4 bytes on driver detach. Fix it. This was spotted using Kmemleak by Catalin Marinas. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Catalin Marinas <catalin.marinas@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] ata_piix: IDE mode SATA patch for Intel ICH9Jason Gaston
This updated patch adds the Intel ICH9 IDE mode SATA controller DID's. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Acked-by: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-13[PATCH] Fix numerous kcalloc() calls, convert to kzalloc()Robert P. J. Day
All kcalloc() calls of the form "kcalloc(1,...)" are converted to the equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect ordering of the first two arguments are fixed. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Adam Belay <ambx1@neo.rr.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] libata: Incorrect timing computation for PIO5/6Alan
The ata timing computation code makes some mistakes in PIO5/6 because a check was not updated correctly when I put this support into the kernel. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-07[PATCH] sata_promise: new EH conversion, take 2Mikael Pettersson
This patch converts sata_promise to use new-style libata error handling on Promise SATA chips, for both SATA and PATA ports. * ATA_FLAG_SRST is no longer set * ->phy_reset is no longer set as it is unused when ->error_handler is present, and pdc_sata_phy_reset() has been removed * pdc_freeze() masks interrupts and halts DMA via PDC_CTLSTAT * pdc_thaw() clears interrupt status in PDC_INT_SEQMASK and then unmasks interrupts in PDC_CTLSTAT * pdc_error_handler() reinitialises the port if it isn't frozen, and then invokes ata_do_eh() with standard {s,}ata reset methods * pdc_post_internal_cmd() resets the port in case of errors * the PATA-only 20619 chip continues to use old-style EH: not by necessity but simply because I don't have documentation for it or any way to test it Since the previous version pdc_error_handler() has been rewritten and it now mostly matches ahci and sata_sil24. In case anyone wonders: the call to pdc_reset_port() isn't a heavy-duty reset, it's a light-weight reset to quickly put a port into a sane state. The discussion about the PCI flushes in pdc_freeze() and pdc_thaw() seemed to end with a consensus that the flushes are OK and not obviously redundant, so I decided to keep them for now. This patch was prepared against 2.6.19-git7, but it also applies to 2.6.19 + libata #upstream, with or without the revised sata_promise cleanup patch I recently submitted. This patch does conflict with the #promise-sata-pata patch: this patch removes pdc_sata_phy_reset() while #promise-sata-pata modifies it. The correct patch resolution is to remove the function. Tested on 2037x and 2057x chips, with PATA patches on top and disks on both SATA and PATA ports. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-07[PATCH] libata: let ATA_FLAG_PIO_POLLING use polling pio for ATA_PROT_NODATAAlbert Lee
Even if ATA_FLAG_PIO_POLLING is set, libata uses irq pio for the ATA_PROT_NODATA protocol. This patch let ATA_FLAG_PIO_POLLING use polling pio for the ATA_PROT_NODATA protocol. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-07[PATCH] sata_promise: cleanups, take 2Mikael Pettersson
This patch performs two simple cleanups of sata_promise. * Remove board_20771 and map device id 0x3577 to board_2057x. After the recent corrections for SATAII chips, board_20771 and board_2057x were equivalent in the driver. * Remove hp->hotplug_offset and use hp->flags & PDC_FLAG_GEN_II to compute hotplug_offset in pdc_host_init(). hp->hotplug_offset was used to distinguish 1st and 2nd generation chips in one particular case, but now we have that information in a more general form in hp->flags, so hp->hotplug_offset is redundant. Changes since previous submission: rebased on libata-dev #upstream, cleaned up hotplug_offset computation based on Tejun's comments, expanded hotplug_offset removal rationale. This patch does not depend on the pending new EH conversion patch. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-06Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/pcmcia/ds.c Fix up merge failures with Linus's head and fix new compile failures. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/ata/libata-scsi.c include/linux/libata.h Futher merge of Linus's head and compilation fixups. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-04[PATCH] pcmcia: conf.ConfigBase and conf.Present consolidationDominik Brodowski
struct pcmcia_device *p_dev->conf.ConfigBase and .Present are set in almost all PCMICA driver right at the beginning, using the same calls but slightly different implementations. Unfiy this in the PCMCIA core. Includes a small bugfix ("drivers/net/pcmcia/xirc2ps_cs.c: remove unused label") from and Signed-off-by Adrian Bunk <bunk@stusta.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: remove manf_id and card_id indirectionDominik Brodowski
As we read out the manufactor and card_id from the PCMCIA device in the PCMCIA core, and device drivers can access those reliably in struct pcmcia_device's fields manf_id and card_id, remove additional (and partly broken) manf_id and card_id detection logic from PCMCIA device drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: yet another IDE IDMarcin Juszkiewicz
Microdrive reported by one of OpenEmbedded developers. product info: "WEIDA", "TWTTI", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) (equivalent update to pata_pcmcia.c by Dominik Brodowski) Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: Add an id to ide-cs.cMatt Reimer
Add an ID entry for: product info: "TRANSCEND", "TS1GCF80", "", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pata_ali: small fixesAlan
Switch to pci_get_bus_and_slot because some x86 systems seem to be handing us a device with dev->bus = NULL. Also don't apply the isa fixup to revision C6 and later of the chip. Really we need to work out wtf is handing us pdev->bus = NULL, but firstly and more importantly we need the drivers working. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-04[PATCH] pata_via: VIA 8251 bridged systems are now out and aboutAlan
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-04[PATCH] trivial piix: swap bogus dot for comma spaceAlan
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-03[PATCH] sata_promise: PHYMODE4 fixupMikael Pettersson
This patch adds code to fix up the PHYMODE4 "align timing" register value on second-generation Promise SATA chips. Failure to correct this value on non-x86 machines makes drive detection prone to failure due to timeouts. (I've observed about 50% detection failure rates on SPARC64.) The HW boots with a bad value in this register, but on x86 machines the Promise BIOS corrects it to the value recommended by the manual, so most people have been unaffected by this issue. After developing the patch I checked Promise's SATAII driver, and discovered that it also corrects PHYMODE4 just like this patch does. This patch depends on the sata_promise SATAII updates patch I sent recently. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-03[PATCH] libata: always use polling IDENTIFYTejun Heo
libata switched to IRQ-driven IDENTIFY when IRQ-driven PIO was introduced. This has caused a lot of problems including device misdetection and phantom device. ATA_FLAG_DETECT_POLLING was added recently to selectively use polling IDENTIFY on problemetic drivers but many controllers and devices are affected by this problem and trying to adding ATA_FLAG_DETECT_POLLING for each such case is diffcult and not very rewarding. This patch makes libata always use polling IDENTIFY. This is consistent with libata's original behavior and drivers/ide's behavior. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-03[libata] pata_cs5535: fix buildJeff Garzik
Noticed by Tejun and others. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-03[PATCH] ahci: do not powerdown during initializationTejun Heo
ahci_init_controller() calls ahci_deinit_port() to make sure the controller is stopped before initializing the controller. In turn, ahci_deinit_port() invokes ahci_power_down() to power down the port. If the controller supports slumber mode, the link is put into it. Unfortunately, some devices don't implement link powersaving mode properly and show erratic behavior after link is put into slumber mode. For example, HL-DT-ST DVD-RAM GSA-H30N completely locks up on slumber transition and can only be recovered with the *REAL* hard reset - power removal and reapply. Note that this makes the first probing reset different from all others. If the above dvd-ram is hotplugged after ahci is initialized, no problem occurs because ahci is already fully initialized with phy powered up. So, this might also be the reason for other weird AHCI initial probing abnormalities. This patch moves power up/down out of port init/deinit and call them only when needed. Power down is now called only when suspending. As system suspend usually involves powering down 12v for storage devices, this shouldn't cause problem even if the attached device doesn't support slumber mode. However, in partial power management and suspend failure cases, devices might lock up after suspend attempt. I thought about removing transition to slumber mode altogether but ahci spec mandates it before HBA D3 state transition. Blacklisting such devices might be the solution. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-03[PATCH] libata: prepare ata_sg_clean() for invocation from EHTejun Heo
Make ata_sg_clean() global and don't allow NCQ for internal commands. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-03[PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf()Tejun Heo
Separate out rw ATA taskfile building from ata_scsi_rw_xlat() into ata_build_rw_tf(). This will be used to improve media error handling. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-03[PATCH] libata: implement ata_exec_internal_sg()Tejun Heo
Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-03[PATCH] libata: make sure IRQ is cleared after ata_bmdma_freeze()Tejun Heo
Now that BMDMA status is recorded in irq handler. ata_bmdma_freeze() is free to manipulate host status. Under certain circumstances, some controllers (ICH7 in enhanced mode w/ IRQ shared) raise IRQ when CTL register is written to and ATA_NIEN doesn't mask it. This patch makes ata_bmdma_freeze() clear all pending IRQs after freezing a port. This change makes explicit clearing in ata_device_add() unnecessary and thus kills it. The removed code was SFF-specific and was in the wrong place. Note that ->freeze() handler is always called under ap->lock held and irq disabled. Even if CTL manipulation causes stuck IRQ, it's cleared immediately. This should be safe (enough) even in SMP environment. More correct solution is to mask the IRQ from IRQ controller but that would be an overkill. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-03[PATCH] libata: move BMDMA host status recording from EH to interrupt handlerTejun Heo
For certain errors, interrupt handler alter BMDMA host status before entering EH (clears active and intr). Thus altered BMDMA host status value is recorded by BMDMA EH and reported to user. Move BMDMA host status recording from EH to interrupt handler. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-03[PATCH] libata: make sure sdev doesn't go away while rescanningTejun Heo
ata_scsi_dev_rescan() doesn't synchronize against SCSI device detach and the target sdev might go away in the middle. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-03[PATCH] libata: don't request sense if the port is frozenTejun Heo
If EH command is issued to a frozen port, it fails with AC_ERR_SYSTEM. libata used to request sense even when the port is frozen needlessly adding AC_ERR_SYSTEM to err_mask. Don't do it. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-03[PATCH] libata: fix READ CAPACITY simulationTejun Heo
* READ CAPACITY (16) implementation fixed. Result was shifted by two bytes. Carlos Pardo spotted this problem and submitted preliminary patch. Capacity => 2TB is handled correctly now. (verifid w/ fake capacity) * Use dev->n_sectors instead of re-reading directly from ID data. * Define and use ATA_SCSI_RBUF_SET() which considers rbuf length. This should be done for all simulation functions. Userland can issue any simulated command with arbitrary buffer length. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Carlos Pardo <Carlos.Pardo@siliconimage.com>
2006-12-03[PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via, ↵Tejun Heo
take #2 This patch implements ATA_FLAG_SETXFER_POLLING and use in pata_via. If this flag is set, transfer mode setting performed by polling not by interrupt. This should help those controllers which raise interrupt before the command is actually complete on SETXFER. Rationale for this approach. * uses existing facility and relatively simple * no busy sleep in the interrupt handler * updating drivers is easy While at it, kill now unused flag ATA_FLAG_SRST in pata_via. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-03[PATCH] libata: set IRQF_SHARED for legacy PCI IDE IRQsTejun Heo
There are machines out there which share legacy PCI IDE IRQs w/ other devices. libata SFF interrupt/HSM code is ready for shared IRQ and has been setting IRQF_SHARED for devices in native PCI mode. Device in legacy mode is still a PCI device and thus supposedly uses active-low level triggered IRQ. Machines with such setup should be quite rare and w/o this flag libata is likely to fail loading and render the system unuseable. Also, IDE driver has been setting IRQF_SHARED for devices in legacy mode for a looooong time. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-03[PATCH] libata: kill unnecessary sht->max_sectors initializationsTejun Heo
sht->max_sectors is overrided unconditionally in ->slave_configure. There's no reason to set it to any value. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-03[PATCH] libata: add missing sht->slave_destroyTejun Heo
Add missing sht->slave_destroy. Most drivers received this fix in didn't. Fix those four drives. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-01[PATCH] libata: print cdb[0] in failed qc reportTejun Heo
Print cdb[0] in failed qc report. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] sata_nv: fix ATAPI in ADMA modeRobert Hancock
The attached patch against 2.6.19-rc6-mm1 fixes some problems in sata_nv with ATAPI devices on controllers running in ADMA mode. Some of the logic in the nv_adma_bmdma_* functions was inverted causing a bunch of warnings and caused those functions not to work properly. Also, when an ATAPI device is connected, we need to use the legacy DMA engine. The code now disables the PCI configuration register bits for ADMA so that this works, and ensures that no ATAPI DMA commands go through until this is done. Fixes Bugzilla http://bugzilla.kernel.org/show_bug.cgi?id=7538 Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] pata_marvell: merge Mandriva patchesAlan
Correct and complete the Marvell PATA cable detection logic. From: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] pata_hpt3x3: suspend/resume supportAlan
Again split the chipset init away and call it both on resume and on setup Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] pata : more drivers that need only standard suspend and resumeAlan
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] hpt36x: Suspend/resume supportAlan
Another chipset which needs some reconfiguration after a resume. All the chip setup is moved to a new function called in both setup and resume. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] pata_via suspend/resume supportAlan
The major VIA issues were handled by the quirks update for resume quirks. The ATA driver also has to do some work however when resuming from RAM. Certain chips need the FIFO reconfiguring, and the 66MHz clock setup updating. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] pata_amd: suspend/resumeAlan
Early AMD chips require FIFO and/or simplex flag clearing work on resume from RAM. Most devices need no help Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] pata_it821x: Suspend/Resume supportAlan
If you are using the noraid option then after a suspend/resume sequence we need to reset the card back out of raid mode again. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>