summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
AgeCommit message (Collapse)Author
2008-10-09[CPUFREQ] Fix BUG: using smp_processor_id() in preemptible codeAndrea Righi
Use get_cpu()/put_cpu() in cpufreq_ondemand init routine, instead of smp_processor_id() to avoid the following BUG: [ 35.313118] BUG: using smp_processor_id() in preemptible [00000000] code=: modprobe/4952 [ 35.313132] caller is cpufreq_gov_dbs_init+0xa/0x8f [cpufreq_ondemand] [ 35.313140] Pid: 4952, comm: modprobe Not tainted 2.6.27-rc5-mm1 #23 [ 35.313145] Call Trace: [ 35.313158] [<ffffffff80361ff7>] debug_smp_processor_id+0xd7/0xe0 [ 35.313167] [<ffffffffa010800a>] cpufreq_gov_dbs_init+0xa/0x8f [cpufreq_ondemand] [ 35.313176] [<ffffffff8020903b>] _stext+0x3b/0x160 [ 35.313185] [<ffffffff804768c5>] __mutex_unlock_slowpath+0xe5/0x190 [ 35.313195] [<ffffffff8026236a>] trace_hardirqs_on_caller+0xca/0x140 [ 35.313205] [<ffffffff8026ef4c>] sys_init_module+0xdc/0x210 [ 35.313212] [<ffffffff8020b7cb>] system_call_fastpath+0x16/0x1b Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ] Don't export governors for default governorSven Wegener
We don't need to export the governors for use as the default governor, because the default governor will be built-in anyway and we can access the symbol directly. This also fixes the following sparse warnings: drivers/cpufreq/cpufreq_conservative.c:578:25: warning: symbol 'cpufreq_gov_conservative' was not declared. Should it be static? drivers/cpufreq/cpufreq_ondemand.c:582:25: warning: symbol 'cpufreq_gov_ondemand' was not declared. Should it be static? drivers/cpufreq/cpufreq_performance.c:39:25: warning: symbol 'cpufreq_gov_performance' was not declared. Should it be static? drivers/cpufreq/cpufreq_powersave.c:38:25: warning: symbol 'cpufreq_gov_powersave' was not declared. Should it be static? drivers/cpufreq/cpufreq_userspace.c:190:25: warning: symbol 'cpufreq_gov_userspace' was not declared. Should it be static? Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ][6/6] cpufreq: Add idle microaccounting in ondemand governorvenkatesh.pallipadi@intel.com
Use get_cpu_idle_time_us() to get micro-accounted idle information. This enables ondemand to get more accurate idle and busy timings than the jiffy based calculation. As a result, we can decrease the ondemand safety gaurd band from 80-10 to 95-3. Results in more aggressive power savings. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ][4/6] cpufreq_ondemand: Parameterize down differentialvenkatesh.pallipadi@intel.com
Use a parameter for down differential, instead of hardcoded 10%. Follow-on patch changes the down-differential dynamically, based on whether we are using idle micro-accounting or not. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ][3/6] cpufreq: get_cpu_idle_time() changes in ondemand for ↵venkatesh.pallipadi@intel.com
idle-microaccounting Preparatory changes for doing idle micro-accounting in ondemand governor. get_cpu_idle_time() gets extra parameter and returns idle time and also the wall time that corresponds to the idle time measurement. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ][2/6] cpufreq: Change load calculation in ondemand for software ↵venkatesh.pallipadi@intel.com
coordination Change the load calculation algorithm in ondemand to work well with software coordination of frequency across the dependent cpus. Multiply individual CPU utilization with the average freq of that logical CPU during the measurement interval (using getavg call). And find the max CPU utilization number in terms of CPU freq. That number is then used to get to the target freq for next sampling interval. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ][1/6] cpufreq: Add cpu number parameter to __cpufreq_driver_getavg()venkatesh.pallipadi@intel.com
Add a cpu parameter to __cpufreq_driver_getavg(). This is needed for software cpufreq coordination where policy->cpu may not be same as the CPU on which we want to getavg frequency. A follow-on patch will use this parameter to getavg freq from all cpus in policy->cpus. Change since last patch. Fix the offline/online and suspend/resume oops reported by Youquan Song <youquan.song@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ] use deferrable delayed work init in conservative governorBen Slusky
Venki Pallipadi made a similar change to the ondemand governor a while back (in commit 28287033e12463c8ff89f1ea8038783d0360391c). It seems to work just as well in the conservative governor, leading to fewer wakeups as reported by powertop. Signed-off-by: Ben Slusky <sluskyb@paranoiacs.org> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ] drivers/cpufreq/cpufreq.c: Adjust error handling code involving ↵Julia Lawall
cpufreq_cpu_put After calling cpufreq_cpu_get, error handling code should call cpufreq_cpu_put. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r@ expression x,E; statement S; position p1,p2,p3; @@ ( if ((x = cpufreq_cpu_get@p1(...)) == NULL || ...) S | x = cpufreq_cpu_get@p1(...) ... when != x if (x == NULL || ...) S ) <... if@p3 (...) { ... when != cpufreq_cpu_put(x) when != if (x) { ... cpufreq_cpu_put(x); ...} return@p2 ...; } ...> ( return x; | return 0; | x = E | E = x | cpufreq_cpu_put(x) ) @exists@ position r.p1,r.p2,r.p3; expression x; int ret != 0; statement S; @@ * x = cpufreq_cpu_get@p1(...) <... * if@p3 (...) S ...> * return@p2 \(NULL\|ret\); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ] add error handling for cpufreq_register_governor() errorAkinobu Mita
Add error handling for cpufreq_register_governor() error Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: cpufreq@lists.linux.org.uk Signed-off-by: Dave Jones <davej@redhat.com>
2008-08-08[CPUFREQ] Fix -Wshadow warning in conservative governor.Dave Jones
drivers/cpufreq/cpufreq_conservative.c:336:15: warning: symbol 'freq_step' shadows an earlier one Just rename the local variable. Signed-off-by: Dave Jones <davej@redhat.com>
2008-07-30cpufreq acpi: only call _PPC after cpufreq ACPI init funcs got called alreadyThomas Renninger
Ingo Molnar provided a fix to not call _PPC at processor driver initialization time in "[PATCH] ACPI: fix cpufreq regression" (git commit e4233dec749a3519069d9390561b5636a75c7579) But it can still happen that _PPC is called at processor driver initialization time. This patch should make sure that this is not possible anymore. Signed-off-by: Thomas Renninger <trenn@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Len Brown <lenb@kernel.org> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23Merge branch 'cpus4096-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits) NR_CPUS: Replace NR_CPUS in speedstep-centrino.c cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP NR_CPUS: Replace NR_CPUS in cpufreq userspace routines NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c, fix cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target cpumask: Provide a generic set of CPUMASK_ALLOC macros cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c cpumask: Optimize cpumask_of_cpu in drivers/misc/sgi-xp/xpc_main.c cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr Revert "cpumask: introduce new APIs" cpumask: make for_each_cpu_mask a bit smaller net: Pass reference to cpumask variable in net/sunrpc/svc.c ... Fix up trivial conflicts in drivers/cpufreq/cpufreq.c manually
2008-07-21Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] cpufreq: remove CVS keywords [CPUFREQ] change cpu freq arrays to per_cpu variables
2008-07-20NR_CPUS: Replace NR_CPUS in cpufreq userspace routinesMike Travis
* Replace arrays sized by NR_CPUS with percpu variables. Prior reference: http://marc.info/?l=linux-kernel&m=120251421825989&w=4 Subject: [PATCH 1/4] cpufreq: change cpu freq tables to per_cpu variables From: Mike Travis <travis () sgi ! com> Date: 2008-02-08 23:37:39 Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-06Merge commit 'v2.6.26-rc9' into cpus4096Ingo Molnar
2008-06-09Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix format string bug.
2008-06-09[CPUFREQ] Fix format string bug.Chris Wright
Format string bug. Not exploitable, as this is only writable by root, but worth fixing all the same. Spotted-by: Ilja van Sprundel <ilja@netric.org> Signed-off-by: Dave Jones <davej@redhat.com>
2008-06-06cpufreq: fix null object access on Transmeta CPUCHIKAMA masaki
If cpu specific cpufreq driver(i.e. longrun) has "setpolicy" function, governor object isn't set into cpufreq_policy object at "__cpufreq_set_policy" function in driver/cpufreq/cpufreq.c . This causes a null object access at "store_scaling_setspeed" and "show_scaling_setspeed" function in driver/cpufreq/cpufreq.c when reading or writing through /sys interface (ex. cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed) Addresses: http://bugzilla.kernel.org/show_bug.cgi?id=10654 https://bugzilla.redhat.com/show_bug.cgi?id=443354 Signed-off-by: CHIKAMA Masaki <masaki.chikama@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Chuck Ebbert <cebbert@redhat.com> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-29[CPUFREQ] fix double unlock of cpu_policy_rwsem in drivers/cpufreq/cpufreq.cLothar Waßmann
In drivers/cpufreq/cpufreq.c the function cpufreq_add_dev() takes the error exit 'err_out_unregister' from different places once with the 'cpu_policy_rwsem' lock held, once with the lock released: | if (ret) | goto err_out_unregister; | } | | policy->governor = NULL; /* to assure that the starting sequence is | * run in cpufreq_set_policy */ | | /* set default policy */ | ret = __cpufreq_set_policy(policy, &new_policy); | policy->user_policy.policy = policy->policy; | policy->user_policy.governor = policy->governor; | | unlock_policy_rwsem_write(cpu); | | if (ret) { | dprintk("setting policy failed\n"); | goto err_out_unregister; | } This leads to the following error message in case of a failing __cpufreq_set_policy() call: ===================================== [ BUG: bad unlock balance detected! ] ------------------------------------- swapper/1 is trying to release lock (&per_cpu(cpu_policy_rwsem, cpu)) at: [<c01b4564>] unlock_policy_rwsem_write+0x30/0x40 but there are no more locks to release! other info that might help us debug this: 1 lock held by swapper/1: #0: (sysdev_drivers_lock){--..}, at: [<c018fd18>] sysdev_driver_register+0x74/0x130 stack backtrace: [<c002f588>] (dump_stack+0x0/0x14) from [<c00692fc>] (print_unlock_inbalance_bug+0xc8/0x104) [<c0069234>] (print_unlock_inbalance_bug+0x0/0x104) from [<c006b7ac>] (lock_release_non_nested+0xc4/0x19c) r6:00000028 r5:c3c1ab80 r4:c01b4564 [<c006b6e8>] (lock_release_non_nested+0x0/0x19c) from [<c006b9e0>] (lock_release+0x15c/0x18c) r8:60000013 r7:00000001 r6:c01b4564 r5:c0541bb4 r4:c3c1ab80 [<c006b884>] (lock_release+0x0/0x18c) from [<c0061ba0>] (up_write+0x24/0x30) r8:c0541b80 r7:00000000 r6:ffffffea r5:c3c34828 r4:c0541b8c [<c0061b7c>] (up_write+0x0/0x30) from [<c01b4564>] (unlock_policy_rwsem_write+0x30/0x40) r4:c3c34884 [<c01b4534>] (unlock_policy_rwsem_write+0x0/0x40) from [<c01b4c40>] (cpufreq_add_dev+0x324/0x398) [<c01b491c>] (cpufreq_add_dev+0x0/0x398) from [<c018fd64>] (sysdev_driver_register+0xc0/0x130) [<c018fca4>] (sysdev_driver_register+0x0/0x130) from [<c01b3574>] (cpufreq_register_driver+0xbc/0x174) Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dave Jones <davej@redhat.com>
2008-05-23cpufreq: use performance variant for_each_cpu_mask_nrMike Travis
Change references from for_each_cpu_mask to for_each_cpu_mask_nr where appropriate Reviewed-by: Paul Jackson <pj@sgi.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-22[CPUFREQ] clarify license of freq_table.cDominik Brodowski
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Dave Jones <davej@redhat.com>
2008-05-19[CPUFREQ] change cpu freq arrays to per_cpu variablesMike Travis
Change cpufreq_policy and cpufreq_governor pointer tables from arrays to per_cpu variables in the cpufreq subsystem. Also some minor complaints from checkpatch.pl fixed. Based on: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-04-28[CPUFREQ] state info wrong after resumeShaohua Li
Sometimes old_index != stat->last_index, see cpufreq_update_policy, bios can change cpu setting in resume. In my test, after resume cpu is in lowest speed, but the stat info shows cpu is in full speed. This patch makes the stat info correct after a resume. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2008-04-28[CPUFREQ] allow use of the powersave governor as the default oneAlessandro Guido
Allow use of the powersave cpufreq governor as the default one for EMBEDDED configs. Signed-off-by: Alessandro Guido <alessandro.guido@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2008-04-28[CPUFREQ] expose cpufreq coordination requirements regardless of ↵Darrick J. Wong
coordination mechanism Currently, affected_cpus shows which CPUs need to have their frequency coordinated in software. When hardware coordination is in use, the contents of this file appear the same as when no coordination is required. This can lead to some confusion among user-space programs, for example, that do not know that extra coordination is required to force a CPU core to a particular speed to control power consumption. To fix this, create a "related_cpus" attribute that always displays the coordination map regardless of whatever coordination strategy the cpufreq driver uses (sw or hw). If the cpufreq driver does not provide a value, fall back to policy->cpus. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2008-04-28[CPUFREQ] fix show_trans_tableCesar Eduardo Barros
Fix show_trans_table when it overflows PAGE_SIZE. * Not all snprintf calls were protected against being passed a negative length. * When show_trans_table overflows, len might be > PAGE_SIZE. In that case, returns PAGE_SIZE. Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
2008-04-28[CPUFREQ] Warn when cpufreq_register_notifier called before pure initcallsCesar Eduardo Barros
If cpufreq_register_notifier is called before pure initcalls, init_cpufreq_transition_notifier_list will overwrite whatever it did, causing notifiers to be ignored. Print some noise to the kernel log if that happens. Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
2008-04-28[CPUFREQ] Refactor locking in cpufreq_add_devDave Jones
Simplify this by moving the unlocking out of the error paths into the exit path. Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
2008-04-28[CPUFREQ] more CodingStyleDave Jones
void * p -> void *p no space between function parameters removed excess whitespace Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
2008-04-28[CPUFREQ] CodingStyleDave Jones
return is not a function. Signed-off-by: Dave Jones <davej@redhat.com>
2008-04-28[CPUFREQ] Slightly shorten the error paths of cpufreq_suspend/cpufreq_resumeDave Jones
Signed-off-by: Dave Jones <davej@redhat.com>
2008-03-05[CPUFREQ] fix section mismatch warningsSam Ravnborg
Fix the following warnings: WARNING: vmlinux.o(.text+0xfe6711): Section mismatch in reference from the function cpufreq_unregister_driver() to the variable .cpuinit.data:cpufreq_cpu_notifier WARNING: vmlinux.o(.text+0xfe68af): Section mismatch in reference from the function cpufreq_register_driver() to the variable .cpuinit.data:cpufreq_cpu_notifier WARNING: vmlinux.o(.exit.text+0xc4fa): Section mismatch in reference from the function cpufreq_stats_exit() to the variable .cpuinit.data:cpufreq_stat_cpu_notifier The warnings were casued by references to unregister_hotcpu_notifier() from normal functions or exit functions. This is flagged by modpost as a potential error because it does not know that for the non HOTPLUG_CPU scenario the unregister_hotcpu_notifier() is a nop. Silence the warning by replacing the __initdata annotation with a __refdata annotation. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
2008-03-05[CPUFREQ] Fix missing cpufreq_cpu_put() call in ->storeDave Jones
refactor to use gotos instead of explicit exit paths Signed-off-by: Dave Jones <davej@redhat.com>
2008-03-05[CPUFREQ] Fix missing cpufreq_cpu_put() call in ->showDave Jones
refactor to use gotos instead of explicit exit paths Signed-off-by: Dave Jones <davej@redhat.com>
2008-02-21cpufreq: fix kobject reference count handlingBalaji Rao
The cpufreq core should not take an extra kobject reference count for no reason, and then refuse to release it. This has been reported as keeping machines from properly powering down all the way. Signed-off-by: Balaji Rao <balajirrao@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Yi Yang <yi.y.yang@intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Frans Pop <elendil@planet.nl> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-06[CPUFREQ] fix configuration help messageStefano Brivio
cpufreq support can't be built as a module. Fix the related configuration help message. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: Dave Jones <davej@redhat.com>
2008-02-06[CPUFREQ] Eliminate cpufreq_userspace scaling_setspeed deadlockVenki Pallipadi
Eliminate cpufreq_userspace scaling_setspeed deadlock. Luming Yu recently uncovered yet another cpufreq related deadlock. One thread that continuously switches the governors and the other thread that repeatedly cats the contents of cpufreq directory causes both these threads to go into a deadlock. Detailed examination of the deadlock showed the exact flow before the deadlock as: Thread 1 Thread 2 ________ ________ cats files under /sys/devices/.../cpufreq/ Set governor to userspace Adds a new sysfs entry for scaling_setspeed cats files under /sys/devices/.../cpufreq/ Set governor to performance Holds cpufreq_rw_sem in write mode Sends a STOP notify to userspace governor cat /sys/devices/.../cpufreq/scaling_setspeed Gets a handle on the above sysfs entry with sysfs_get_active Blocks while trying to get cpufreq_rw_sem in read mode Remove a sysfs entry for scaling_setspeed Blocks on sysfs_deactivate while waiting for earlier get_active (on other thread) to drain At this point both threads go into deadlock and any other thread that tries to do anything with sysfs cpufreq will also block. There seems to be no easy way to avoid this deadlock as long as cpufreq_userspace adds/removes the sysfs entry under same kobject as cpufreq. Below patch moves scaling_setspeed to cpufreq.c, keeping it always and calling back the governor on read/write. This is the cleanest fix I could think of, even though adding two callbacks in governor structure just for this seems unnecessary. Note that the change makes scaling_setspeed under /sys/.../cpufreq permanent and returns <unsupported> when governor is not userspace. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-02-06[CPUFREQ] fix incorrect comment on show_available_freqs() in freq_table.cFenghua Yu
In freq_table.c, show_available_freqs()'s comment is oberviously wrong. Change the comment to a new one to avoid confusion. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2008-02-06[CPUFREQ] drivers/cpufreq: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-01-30cpufreq: fix obvious condition statement errorYi Yang
The function __cpufreq_set_policy in file drivers/cpufreq/cpufreq.c has a very obvious error: if (policy->min > data->min && policy->min > policy->max) { ret = -EINVAL; goto error_out; } This condtion statement is wrong because it returns -EINVAL only if policy->min is greater than policy->max (in this case, "policy->min > data->min" is true for ever.). In fact, it should return -EINVAL as well if policy->max is less than data->min. The correct condition should be: if (policy->min > data->max || policy->max < data->min) { The following test result testifies the above conclusion: Before applying this patch: [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies 2394000 1596000 [root@yangyi-dev /]# echo 1596000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 1596000 [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 1596000 [root@yangyi-dev /]# echo "2000000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq -bash: echo: write error: Invalid argument [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 1596000 [root@yangyi-dev /]# echo "0" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 1596000 [root@yangyi-dev /]# echo "1595000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 1596000 [root@yangyi-dev /]# After applying this patch: [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies 2394000 1596000 [root@yangyi-dev /]# echo 1596000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 1596000 [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 1596000 [root@localhost /]# echo "2000000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq -bash: echo: write error: Invalid argument [root@localhost /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 1596000 [root@localhost /]# echo "0" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq -bash: echo: write error: Invalid argument [root@localhost /]# echo "1595000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq -bash: echo: write error: Invalid argument [root@localhost /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 1596000 [root@localhost /]# echo "1596000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq [root@localhost /]# echo "2394000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq [root@localhost /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 2394000 [root@localhost /] Signed-off-by: Yi Yang <yi.y.yang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-24Kobject: convert drivers/* from kobject_unregister() to kobject_put()Greg Kroah-Hartman
There is no need for kobject_unregister() anymore, thanks to Kay's kobject cleanup changes, so replace all instances of it with kobject_put(). Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: change drivers/cpufreq/cpufreq.c to use kobject_init_and_addGreg Kroah-Hartman
Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Dominik Brodowski <linux@brodo.de> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Shin <jacob.shin@amd.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-17cpufreq: Initialise default governor before useJohannes Weiner
When the cpufreq driver starts up at boot time, it calls into the default governor which might not be initialised yet. This hurts when the governor's worker function relies on memory that is not yet set up by its init function. This migrates all governors from module_init() to fs_initcall() when being the default, as was already done in cpufreq_performance when it was the only possible choice. The performance governor is always initialized early because it might be used as fallback even when not being the default. Fixes at least one actual oops where ondemand is the default governor and cpufreq_governor_dbs() uses the uninitialised kondemand_wq work-queue during boot-time. Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17drivers/cpufreq/cpufreq_stats.c section fixAdrian Bunk
cpufreq_stats_free_table() mustn't be __cpuexit since it's called by the __cpuinit cpufreq_stat_cpu_callback(). This patch fixes the following section mismatch reported by Chris Clayton: WARNING: vmlinux.o(.init.text+0x143dd): Section mismatch: reference to .exit.text:cpufreq_stats_free_table (between 'cpufreq_stat_cpu_callback' and 'cpufreq_stats_init') Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Chris Clayton <chris2553@googlemail.com> Acked-by: Dave Jones <davej@codemonkey.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17cpufreq: fix missing unlocks in cpufreq_add_dev error paths.Dave Jones
Ingo hit some BUG_ONs that were probably caused by these missing unlocks causing an unbalance. He couldn't reproduce the bug reliably, so it's unknown that it's definitly fixing the problem he hit, but it's a fairly good chance, and this fixes an obvious bug. [ Dave: "Ingo followed up that he hit some lockdep related output with this applied, so it may not be right. I'll look at it after xmas if no-one has it figured out before then." Akpm: "It looks pretty correct to me though." ] Signed-off-by: Dave Jones <davej@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22[CPUFREQ] Fix up whitespace in conservative governor.Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com>
2007-10-22[CPUFREQ] Make cpufreq_conservative handle out-of-sync events properlyElias Oltmanns
Make cpufreq_conservative handle out-of-sync events properly Currently, the cpufreq_conservative governor doesn't get notified when the actual frequency the cpu is running at differs from what cpufreq thought it was. As a result the cpu may stay at the maximum frequency after a s2ram / resume cycle even though the system is idle. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: Dave Jones <davej@redhat.com>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits) PM: merge device power-management source files sysfs: add copyrights kobject: update the copyrights kset: add some kerneldoc to help describe what these strange things are Driver core: rename ktype_edd and ktype_efivar Driver core: rename ktype_driver Driver core: rename ktype_device Driver core: rename ktype_class driver core: remove subsystem_init() sysfs: move sysfs file poll implementation to sysfs_open_dirent sysfs: implement sysfs_open_dirent sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir sysfs: make sysfs_root a regular directory dirent sysfs: open code sysfs_attach_dentry() sysfs: make s_elem an anonymous union sysfs: make bin attr open get active reference of parent too sysfs: kill unnecessary NULL pointer check in sysfs_release() sysfs: kill unnecessary sysfs_get() in open paths sysfs: reposition sysfs_dirent->s_mode. sysfs: kill sysfs_update_file() ...
2007-10-12kobjects: fix up improper use of the kobject name fieldGreg Kroah-Hartman
A number of different drivers incorrect access the kobject name field directly. This is not correct as the name might not be in the array. Use the proper accessor function instead.