summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2019-04-27gpio: gpio-omap: fix level interrupt idlingRussell King
[ Upstream commit d01849f7deba81f4959fd9e51bf20dbf46987d1c ] Tony notes that the GPIO module does not idle when level interrupts are in use, as the wakeup appears to get stuck. After extensive investigation, it appears that the wakeup will only be cleared if the interrupt status register is cleared while the interrupt is enabled. However, we are currently clearing it with the interrupt disabled for level-based interrupts. It is acknowledged that this observed behaviour conflicts with a statement in the TRM: CAUTION After servicing the interrupt, the status bit in the interrupt status register (GPIOi.GPIO_IRQSTATUS_0 or GPIOi.GPIO_IRQSTATUS_1) must be reset and the interrupt line released (by setting the corresponding bit of the interrupt status register to 1) before enabling an interrupt for the GPIO channel in the interrupt-enable register (GPIOi.GPIO_IRQSTATUS_SET_0 or GPIOi.GPIO_IRQSTATUS_SET_1) to prevent the occurrence of unexpected interrupts when enabling an interrupt for the GPIO channel. However, this does not appear to be a practical problem. Further, as reported by Grygorii Strashko <grygorii.strashko@ti.com>, the TI Android kernel tree has an earlier similar patch as "GPIO: OMAP: Fix the sequence to clear the IRQ status" saying: if the status is cleared after disabling the IRQ then sWAKEUP will not be cleared and gates the module transition When we unmask the level interrupt after the interrupt has been handled, enable the interrupt and only then clear the interrupt. If the interrupt is still pending, the hardware will re-assert the interrupt status. Should the caution note in the TRM prove to be a problem, we could use a clear-enable-clear sequence instead. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [tony@atomide.com: updated comments based on an earlier TI patch] Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-03gpio: adnp: Fix testing wrong value in adnp_gpio_direction_inputAxel Lin
commit c5bc6e526d3f217ed2cc3681d256dc4a2af4cc2b upstream. Current code test wrong value so it does not verify if the written data is correctly read back. Fix it. Also make it return -EPERM if read value does not match written bit, just like it done for adnp_gpio_direction_output(). Fixes: 5e969a401a01 ("gpio: Add Avionic Design N-bit GPIO expander support") Cc: <stable@vger.kernel.org> Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23gpio: vf610: Mask all GPIO interruptsAndrew Lunn
[ Upstream commit 7ae710f9f8b2cf95297e7bbfe1c09789a7dc43d4 ] On SoC reset all GPIO interrupts are disable. However, if kexec is used to boot into a new kernel, the SoC does not experience a reset. Hence GPIO interrupts can be left enabled from the previous kernel. It is then possible for the interrupt to fire before an interrupt handler is registered, resulting in the kernel complaining of an "unexpected IRQ trap", the interrupt is never cleared, and so fires again, resulting in an interrupt storm. Disable all GPIO interrupts before registering the GPIO IRQ chip. Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13gpio: max7301: fix driver for use with CONFIG_VMAP_STACKChristophe Leroy
commit abf221d2f51b8ce7b9959a8953f880a8b0a1400d upstream. spi_read() and spi_write() require DMA-safe memory. When CONFIG_VMAP_STACK is selected, those functions cannot be used with buffers on stack. This patch replaces calls to spi_read() and spi_write() by spi_write_then_read() which doesn't require DMA-safe buffers. Fixes: 0c36ec314735 ("gpio: gpio driver for max7301 SPI GPIO expander") Cc: <stable@vger.kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-10gpio: msic: fix error return code in platform_msic_gpio_probe()Gustavo A. R. Silva
[ Upstream commit ca1f3ae3154ad6d08caa740c99be0d86644a4e44 ] platform_get_irq() returns an error code, but the gpio-msic driver ignores it and always returns -EINVAL. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-10gpio: adp5588: Fix sleep-in-atomic-context bugMichael Hennerich
[ Upstream commit 6537886cdc9a637711fd6da980dbb87c2c87c9aa ] This fixes: [BUG] gpio: gpio-adp5588: A possible sleep-in-atomic-context bug in adp5588_gpio_write() [BUG] gpio: gpio-adp5588: A possible sleep-in-atomic-context bug in adp5588_gpio_direction_input() Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26gpiolib: Mark gpio_suffixes array with __maybe_unusedAndy Shevchenko
[ Upstream commit b23ec59926faf05b0c43680d05671c484e810ac4 ] Since we put static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it. Mark gpio_suffixes array with __maybe_unused to hide a compiler warning: In file included from drivers/gpio/gpiolib-legacy.c:6:0: drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=] static const char * const gpio_suffixes[] = { "gpios", "gpio" }; ^~~~~~~~~~~~~ In file included from drivers/gpio/gpiolib-devprop.c:17:0: drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=] static const char * const gpio_suffixes[] = { "gpios", "gpio" }; ^~~~~~~~~~~~~ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19gpio: ml-ioh: Fix buffer underwrite on probe error pathAnton Vasilyev
[ Upstream commit 4bf4eed44bfe288f459496eaf38089502ef91a79 ] If ioh_gpio_probe() fails on devm_irq_alloc_descs() then chip may point to any element of chip_save array, so reverse iteration from pointer chip may become chip_save[-1] and gpiochip_remove() will operate with wrong memory. The patch fix the error path of ioh_gpio_probe() to correctly bypass chip_save array. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19gpio: tegra: Move driver registration to subsys_init levelDmitry Osipenko
[ Upstream commit 40b25bce0adbe641a744d1291bc0e51fb7f3c3d8 ] There is a bug in regards to deferred probing within the drivers core that causes GPIO-driver to suspend after its users. The bug appears if GPIO-driver probe is getting deferred, which happens after introducing dependency on PINCTRL-driver for the GPIO-driver by defining "gpio-ranges" property in device-tree. The bug in the drivers core is old (more than 4 years now) and is well known, unfortunately there is no easy fix for it. The good news is that we can workaround the deferred probe issue by changing GPIO / PINCTRL drivers registration order and hence by moving PINCTRL driver registration to the arch_init level and GPIO to the subsys_init. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-16gpio: No NULL ownerLinus Walleij
commit 7d18f0a14aa6a0d6bad39111c1fb655f07f71d59 upstream. Sometimes a GPIO is fetched with NULL as parent device, and that is just fine. So under these circumstances, avoid using dev_name() to provide a name for the GPIO line. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Daniel Rosenberg <drosen@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-26gpio: rcar: Add Runtime PM handling for interruptsGeert Uytterhoeven
commit b26a719bdba9aa926ceaadecc66e07623d2b8a53 upstream. The R-Car GPIO driver handles Runtime PM for requested GPIOs only. When using a GPIO purely as an interrupt source, no Runtime PM handling is done, and the GPIO module's clock may not be enabled. To fix this: - Add .irq_request_resources() and .irq_release_resources() callbacks to handle Runtime PM when an interrupt is requested, - Add irq_bus_lock() and sync_unlock() callbacks to handle Runtime PM when e.g. disabling/enabling an interrupt, or configuring the interrupt type. Fixes: d5c3d84657db57bd "net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTS" Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [fabrizio: cherry-pick to v4.4.y. Use container_of instead of gpiochip_get_data.] Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13gpio: label descriptors using the device nameLinus Walleij
[ Upstream commit 24e78079bf2250874e33da2e7cfbb6db72d3caf4 ] Some GPIO lines appear named "?" in the lsgpio dump due to their requesting drivers not passing a reasonable label. Most typically this happens if a device tree node just defines gpios = <...> and not foo-gpios = <...>, the former gets named "foo" and the latter gets named "?". However the struct device passed in is always valid so let's just label the GPIO with dev_name() on the device if no proper label was passed. Cc: Reported-by: Jason Kridner <jkridner@beagleboard.org> Reported-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25gpio: xgene: mark PM functions as __maybe_unusedArnd Bergmann
commit b115bebc07f282067eccc06fd5aa3060ab1426da upstream. When CONFIG_PM_SLEEP is disabled, we get a warning about unused functions: drivers/gpio/gpio-xgene.c:155:12: warning: 'xgene_gpio_resume' defined but not used [-Wunused-function] static int xgene_gpio_resume(struct device *dev) ^~~~~~~~~~~~~~~~~ drivers/gpio/gpio-xgene.c:142:12: warning: 'xgene_gpio_suspend' defined but not used [-Wunused-function] static int xgene_gpio_suspend(struct device *dev) The warnings are harmless and can be avoided by simplifying the code and marking the functions as __maybe_unused. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25gpio: intel-mid: Fix build warning when !CONFIG_PMAugusto Mecking Caringi
commit fbc2a294f29e726787a0f5238b27137904f26b81 upstream. The only usage of function intel_gpio_runtime_idle() is here (in the same file): static const struct dev_pm_ops intel_gpio_pm_ops = { SET_RUNTIME_PM_OPS(NULL, NULL, intel_gpio_runtime_idle) }; And when CONFIG_PM is not set, the macro SET_RUNTIME_PM_OPS expands to nothing, causing the following compiler warning: drivers/gpio/gpio-intel-mid.c:324:12: warning: ‘intel_gpio_runtime_idle’ defined but not used [-Wunused-function] static int intel_gpio_runtime_idle(struct device *dev) Fix it by annotating the function with __maybe_unused. Signed-off-by: Augusto Mecking Caringi <augustocaringi@gmail.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03gpio: ath79: add missing MODULE_DESCRIPTION/LICENSEJesse Chan
commit 539340f37e6d6ed4cd93e8e18c9b2e4eafd4b842 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION is also added. Signed-off-by: Jesse Chan <jc@linux.com> Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSEJesse Chan
commit 97b03136e1b637d7a9d2274c099e44ecf23f1103 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan <jc@linux.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16gpio: altera: Use handle_level_irq when configured as a level_highPhil Reid
[ Upstream commit f759921cfbf4847319d197a6ed7c9534d593f8bc ] When a threaded irq handler is chained attached to one of the gpio pins when configure for level irq the altera_gpio_irq_leveL_high_handler does not mask the interrupt while being handled by the chained irq. This resulting in the threaded irq not getting enough cycles to complete quickly enough before the irq was disabled as faulty. handle_level_irq should be used in this situation instead of handle_simple_irq. In gpiochip_irqchip_add set default handler to handle_bad_irq as per Documentation/gpio/driver.txt. Then set the correct handler in the set_type callback. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28gpio: mpc8xxx: Correct irq handler functionLiu Gang
commit d71cf15b865bdd45925f7b094d169aaabd705145 upstream. From the beginning of the gpio-mpc8xxx.c, the "handle_level_irq" has being used to handle GPIO interrupts in the PowerPC/Layerscape platforms. But actually, almost all PowerPC/Layerscape platforms assert an interrupt request upon either a high-to-low change or any change on the state of the signal. So the "handle_level_irq" is not reasonable for PowerPC/Layerscape GPIO interrupt, it should be "handle_edge_irq". Otherwise the system may lost some interrupts from the PIN's state changes. Signed-off-by: Liu Gang <Gang.Liu@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07gpio: sa1100: fix irq probing for ucb1x00Russell King
commit 56beac95cb88c188d2a885825a5da131edb41fe3 upstream. ucb1x00 has used IRQ probing since it's dawn to find the GPIO interrupt that it's connected to. However, commit 23393d49fb75 ("gpio: kill off set_irq_flags usage") broke this by disabling IRQ probing on GPIO interrupts. Fix this. Fixes: 23393d49fb75 ("gpio: kill off set_irq_flags usage") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07gpio: Fix OF build problem on UMLinus Walleij
commit 2527ecc9195e9c66252af24c4689e8a67cd4ccb9 upstream. The UserMode (UM) Linux build was failing in gpiolib-of as it requires ioremap()/iounmap() to exist, which is absent from UM. The non-existence of IO memory is negatively defined as CONFIG_NO_IOMEM which means we need to depend on HAS_IOMEM. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20gpio: intel-mid: Remove potentially harmful codeAndy Shevchenko
commit 3dbd3212f81b2b410a34a922055e2da792864829 upstream. The commit d56d6b3d7d69 ("gpio: langwell: add Intel Merrifield support") doesn't look at all as a proper support for Intel Merrifield and I dare to say that it distorts the behaviour of the hardware. The register map is different on Intel Merrifield, i.e. only 6 out of 8 register have the same purpose but none of them has same location in the address space. The current case potentially harmful to existing hardware since it's poking registers on wrong offsets and may set some pin to be GPIO output when connected hardware doesn't expect such. Besides the above GPIO and pinctrl on Intel Merrifield have been located in different IP blocks. The functionality has been extended as well, i.e. added support of level interrupts, special registers for wake capable sources and thus, in my opinion, requires a completele separate driver. If someone wondering the existing gpio-intel-mid.c would be converted to actual pinctrl (which by the fact it is now), though I wouldn't be a volunteer to do that. Fixes: d56d6b3d7d69 ("gpio: langwell: add Intel Merrifield support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20gpio: pca953x: Fix NBANK calculation for PCA9536Vignesh R
commit a246b8198f776a16d1d3a3bbfc2d437bad766b29 upstream. NBANK() macro assumes that ngpios is a multiple of 8(BANK_SZ) and hence results in 0 banks for PCA9536 which has just 4 gpios. This is wrong as PCA9356 has 1 bank with 4 gpios. This results in uninitialized PCA953X_INVERT register. Fix this by using DIV_ROUND_UP macro in NBANK(). Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27Revert "gpiolib: Split GPIO flags parsing and GPIO configuration"Johan Hovold
commit 85b03b3033fd4eba82665b3b9902c095a08cc52f upstream. This reverts commit 923b93e451db876d1479d3e4458fce14fec31d1c. Make sure consumers do not overwrite gpio flags for pins that have already been claimed. While adding support for gpio drivers to refuse a request using unsupported flags, the order of when the requested flag was checked and the new flags were applied was reversed to that consumers could overwrite flags for already requested gpios. This not only affects device-tree setups where two drivers could request the same gpio using conflicting configurations, but also allowed user space to clear gpio flags for already claimed pins simply by attempting to export them through the sysfs interface. By for example clearing the FLAG_ACTIVE_LOW flag this way, user space could effectively change the polarity of a signal. Reverting this change obviously prevents gpio drivers from doing sanity checks on the flags in their request callbacks. Fortunately only one recently added driver (gpio-tps65218 in v4.6) appears to do this, and a follow up patch could restore this functionality through a different interface. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24gpio: bcm-kona: fix bcm_kona_gpio_reset() warningsBen Dooks
commit b66b2a0adf0e48973b582e055758b9907a7eee7c upstream. The bcm_kona_gpio_reset() calls bcm_kona_gpio_write_lock_regs() with what looks like the wrong parameter. The write_lock_regs function takes a pointer to the registers, not the bcm_kona_gpio structure. Fix the warning, and probably bug by changing the function to pass reg_base instead of kona_gpio, fixing the following warning: drivers/gpio/gpio-bcm-kona.c:550:47: warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:2>*reg_base got struct bcm_kona_gpio *kona_gpio warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:2>*reg_base got struct bcm_kona_gpio *kona_gpio Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-17gpio: revert get() to non-errorprogating behaviourLinus Walleij
commit e20538b82f1f ("gpio: Propagate errors from chip->get()") started to propagate errors from the .get() functions since we can get errors from the infrastructure of e.g. slowbus GPIO expanders. However it turns out a bunch of drivers relied on the core to clamp the value, so we need to revert to the old behaviour and go over all drivers and fix them to conform to the expectations of the core before we go back to propagating the error code. Cc: stable@vger.kernel.org # 4.3+ Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Fixes: e20538b82f1f ("gpio: Propagate errors from chip->get()") Reported-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-17gpio: generic: clamp values from bgpio_get_set()Linus Walleij
The bgpio_get_set() call should return a value clamped to [0,1], the current code will return a negative value if reading bit 31, which turns the value negative as this is a signed value and thus gets interpreted as an error by the gpiolib core. Found on the gpio-mxc but applies to any MMIO driver. Cc: stable@vger.kernel.org # 4.3+ Cc: kernel@pengutronix.de Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Fixes: e20538b82f1f ("gpio: Propagate errors from chip->get()") Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-11gpio: ath79: Fix the logic to clear offset bit of AR71XX_GPIO_REG_OE registerAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-30gpio: omap: drop omap1 mpuio specific irq_mask/unmask callbacksGrygorii Strashko
Originally OMAP MPUIO GPIO irqchip was implemented using Generic irq chip, but after set of reworks Generic irq chip code was replaced by common OMAP GPIO implementation and finally removed by commit d2d05c65c40e ("gpio: omap: Fix regression for MPUIO interrupts"). Unfortunately, above commit left .irq_mask/unmask callbacks assigned as below for MPUIO GPIO case: irqc->irq_mask = irq_gc_mask_set_bit; irqc->irq_unmask = irq_gc_mask_clr_bit; This now causes boot failure on OMAP1 platforms, after commit 450fa54cfd66 ("gpio: omap: convert to use generic irq handler") which forces these callbacks to be called during GPIO IRQs mapping from gpiochip_irq_map: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 75 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0-rc1-e3-los_afe0c+-00002-g25379c0-dirty #1 Hardware name: Amstrad E3 (Delta) task: c1836000 ti: c1838000 task.ti: c1838000 PC is at irq_gc_mask_set_bit+0x1c/0x60 LR is at __irq_do_set_handler+0x118/0x15c pc : [<c004848c>] lr : [<c0047d4c>] psr: 600000d3 sp : c1839c90 ip : c1862c64 fp : c1839c9c r10: 00000000 r9 : c0411950 r8 : c0411bbc r7 : 00000000 r6 : c185c310 r5 : c00444e8 r4 : c185c300 r3 : c1854b50 r2 : 00000000 r1 : 00000000 r0 : c185c310 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 0000317f Table: 10004000 DAC: 00000057 Process swapper (pid: 1, stack limit = 0xc1838190) Stack: (0xc1839c90 to 0xc183a000) [...] Backtrace: [<c0048470>] (irq_gc_mask_set_bit) from [<c0047d4c>] (__irq_do_set_handler+0x118/0x15c) [<c0047c34>] (__irq_do_set_handler) from [<c0047dd4>] (__irq_set_handler+0x44/0x5c) r6:00000000 r5:c00444e8 r4:c185c300 [<c0047d90>] (__irq_set_handler) from [<c0047e1c>] (irq_set_chip_and_handler_name+0x30/0x34) r7:00000050 r6:00000000 r5:c00444e8 r4:00000050 [<c0047dec>] (irq_set_chip_and_handler_name) from [<c01b345c>] (gpiochip_irq_map+0x3c/0x8c) r7:00000050 r6:00000000 r5:00000050 r4:c1862c64 [<c01b3420>] (gpiochip_irq_map) from [<c0049670>] (irq_domain_associate+0x7c/0x1c4) r5:c185c310 r4:c185cb00 [<c00495f4>] (irq_domain_associate) from [<c0049894>] (irq_domain_add_simple+0x98/0xc0) r8:c0411bbc r7:c185cb00 r6:00000050 r5:00000010 r4:00000001 [<c00497fc>] (irq_domain_add_simple) from [<c01b3328>] (_gpiochip_irqchip_add+0x64/0x10c) r7:c1862c64 r6:c0419280 r5:c1862c64 r4:c1854b50 [<c01b32c4>] (_gpiochip_irqchip_add) from [<c01b79f4>] (omap_gpio_probe+0x2fc/0x63c) r5:c1854b50 r4:c1862c10 [<c01b76f8>] (omap_gpio_probe) from [<c01fcf58>] (platform_drv_probe+0x2c/0x64) r10:00000000 r9:c03e45e8 r8:00000000 r7:c0419294 r6:c0411984 r5:c0419294 r4:c0411950 [<c01fcf2c>] (platform_drv_probe) from [<c01fb668>] (really_probe+0x160/0x29c) Hence, fix it by remove obsolete callbacks assignment. After this change omap_gpio_mask_irq()/omap_gpio_unmask_irq() will be used for MPUIO IRQs masking, but this now happens anyway from omap_gpio_irq_startup/shutdown(). Cc: Tony Lindgren <tony@atomide.com> Fixes: commit d2d05c65c40e ("gpio: omap: Fix regression for MPUIO interrupts") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-29gpiolib: fix oops, if gpio name is NULLVladimir Zapolskiy
Commit c0017ed71966 ("gpio: Introduce gpio descriptor 'name'") causes OOPS on boot on LPC32xx boards: Unable to handle kernel NULL pointer dereference at virtual address 00000000 CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0+ #707 Hardware name: LPC32XX SoC (Flattened Device Tree) task: c381baa0 ti: c381e000 task.ti: c381e000 PC is at strcmp+0x10/0x40 LR is at gpiochip_add+0x3d0/0x4d4 pc : [<>] lr : [<>] psr: a0000093 sp : c381fd60 ip : c381fd70 fp : c381fd6c [snip] Backtrace: [<>] (strcmp) from [<>] (gpiochip_add+0x3d0/0x4d4) [<>] (gpiochip_add) from [<>] (lpc32xx_gpio_probe+0x44/0x60) [<>] (lpc32xx_gpio_probe) from [<>] (platform_drv_probe+0x40/0x8c) [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x110/0x294) [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94) [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98) [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28) [<>] (driver_attach) from [<>] (bus_add_driver+0xd4/0x1f0) [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8) [<>] (driver_register) from [<>] (__platform_driver_register+0x38/0x4c) [<>] (__platform_driver_register) from [<>] (lpc32xx_gpio_driver_init+0x18/0x20) [<>] (lpc32xx_gpio_driver_init) from [<>] (do_one_initcall+0x108/0x1c8) [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4) [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec) [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24) This is caused by the fact that at the moment some GPIO names are set to NULL, there is a hole in linear representation of one GPI bank, see drivers/gpio/gpio-lpc32xx.c / gpi_p3_names[] for details. The same problem most probably affects also gpio-cs5535.c, see cs5535_gpio_names[]. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-17gpio-tegra: Do not create the debugfs entry by defaultSuzuki K. Poulose
The tegra gpio driver creates the debugfs entry irrespective of whether the device exists or not. This is enabled on an arm64_defconfig and leaves an entry in debugfs on all platforms where it is not useful. This patch fixes the issue by creating the entry only when a device exists. Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-17gpio: palmas: fix a possible NULL dereferenceLABBE Corentin
of_match_device could return NULL, and so cause a NULL pointer dereference later. Reported-by: coverity (CID 1130700) Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-17gpio: syscon: fix a possible NULL dereferenceLABBE Corentin
of_match_device could return NULL, and so cause a NULL pointer dereference later at line 199: priv->flags = of_id->data; Reported-by: coverity (CID 1324140) Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-17gpio: 74xx: fix a possible NULL dereferenceLABBE Corentin
of_match_device could return NULL, and so cause a NULL pointer dereference later at line 132: priv->flags = (uintptr_t) of_id->data; Reported-by: coverity (CID 1324141) Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-06Merge tag 'asm-generic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "The asm-generic changes for 4.4 are mostly a series from Christoph Hellwig to clean up various abuses of headers in there. The patch to rename the io-64-nonatomic-*.h headers caused some conflicts with new users, so I added a workaround that we can remove in the next merge window. The only other patch is a warning fix from Marek Vasut" * tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: temporarily add back asm-generic/io-64-nonatomic*.h asm-generic: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations gpio-mxc: stop including <asm-generic/bug> n_tracesink: stop including <asm-generic/bug> n_tracerouter: stop including <asm-generic/bug> mlx5: stop including <asm-generic/kmap_types.h> hifn_795x: stop including <asm-generic/kmap_types.h> drbd: stop including <asm-generic/kmap_types.h> move count_zeroes.h out of asm-generic move io-64-nonatomic*.h out of asm-generic
2015-11-05Merge tag 'spi-v4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-11-04Merge tag 'pm+acpi-4.4-rc1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "Quite a new features are included this time. First off, the Collaborative Processor Performance Control interface (version 2) defined by ACPI will now be supported on ARM64 along with a cpufreq frontend for CPU performance scaling. Second, ACPI gets a new infrastructure for the early probing of IRQ chips and clock sources (along the lines of the existing similar mechanism for DT). Next, the ACPI core and the generic device properties API will now support a recently introduced hierarchical properties extension of the _DSD (Device Specific Data) ACPI device configuration object. If the ACPI platform firmware uses that extension to organize device properties in a hierarchical way, the kernel will automatically handle it and make those properties available to device drivers via the generic device properties API. It also will be possible to build the ACPICA's AML interpreter debugger into the kernel now and use that to diagnose AML-related problems more efficiently. In the future, this should make it possible to single-step AML execution and do similar things. Interesting stuff, although somewhat experimental at this point. Finally, the PM core gets a new mechanism that can be used by device drivers to distinguish between suspend-to-RAM (based on platform firmware support) and suspend-to-idle (or other variants of system suspend the platform firmware is not involved in) and possibly optimize their device suspend/resume handling accordingly. In addition to that, some existing features are re-organized quite substantially. First, the ACPI-based handling of PCI host bridges on x86 and ia64 is unified and the common code goes into the ACPI core (so as to reduce code duplication and eliminate non-essential differences between the two architectures in that area). Second, the Operating Performance Points (OPP) framework is reorganized to make the code easier to find and follow. Next, the cpufreq core's sysfs interface is reorganized to get rid of the "primary CPU" concept for configurations in which the same performance scaling settings are shared between multiple CPUs. Finally, some interfaces that aren't necessary any more are dropped from the generic power domains framework. On top of the above we have some minor extensions, cleanups and bug fixes in multiple places, as usual. Specifics: - ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng). The most significant change is to allow the AML debugger to be built into the kernel. On top of that there is an update related to the NFIT table (the ACPI persistent memory interface) and a few fixes and cleanups. - ACPI CPPC2 (Collaborative Processor Performance Control v2) support along with a cpufreq frontend (Ashwin Chaugule). This can only be enabled on ARM64 at this point. - New ACPI infrastructure for the early probing of IRQ chips and clock sources (Marc Zyngier). - Support for a new hierarchical properties extension of the ACPI _DSD (Device Specific Data) device configuration object allowing the kernel to handle hierarchical properties (provided by the platform firmware this way) automatically and make them available to device drivers via the generic device properties interface (Rafael Wysocki). - Generic device properties API extension to obtain an index of certain string value in an array of strings, along the lines of of_property_match_string(), but working for all of the supported firmware node types, and support for the "dma-names" device property based on it (Mika Westerberg). - ACPI core fix to parse the MADT (Multiple APIC Description Table) entries in the order expected by platform firmware (and mandated by the specification) to avoid confusion on systems with more than 255 logical CPUs (Lukasz Anaczkowski). - Consolidation of the ACPI-based handling of PCI host bridges on x86 and ia64 (Jiang Liu). - ACPI core fixes to ensure that the correct IRQ number is used to represent the SCI (System Control Interrupt) in the cases when it has been re-mapped (Chen Yu). - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede). - ACPI EC driver fixes (Lv Zheng). - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri Kosina, Rami Rosen, Rasmus Villemoes). - New mechanism in the PM core allowing drivers to check if the platform firmware is going to be involved in the upcoming system suspend or if it has been involved in the suspend the system is resuming from at the moment (Rafael Wysocki). This should allow drivers to optimize their suspend/resume handling in some cases and the changes include a couple of users of it (the i8042 input driver, PCI PM). - PCI PM fix to prevent runtime-suspended devices with PME enabled from being resumed during system suspend even if they aren't configured to wake up the system from sleep (Rafael Wysocki). - New mechanism to report the number of a wakeup IRQ that woke up the system from sleep last time (Alexandra Yates). - Removal of unused interfaces from the generic power domains framework and fixes related to latency measurements in that code (Ulf Hansson, Daniel Lezcano). - cpufreq core sysfs interface rework to make it handle CPUs that share performance scaling settings (represented by a common cpufreq policy object) more symmetrically (Viresh Kumar). This should help to simplify the CPU offline/online handling among other things. - cpufreq core fixes and cleanups (Viresh Kumar). - intel_pstate fixes related to the Turbo Activation Ratio (TAR) mechanism on client platforms which causes the turbo P-states range to vary depending on platform firmware settings (Srinivas Pandruvada). - intel_pstate sysfs interface fix (Prarit Bhargava). - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G Bhat, Luis de Bethencourt). - cpuidle mvebu driver cleanups (Russell King). - OPP (Operating Performance Points) framework code reorganization to make it more maintainable (Viresh Kumar). - Intel Broxton support for the RAPL (Running Average Power Limits) power capping driver (Amy Wiles). - Assorted power management code fixes and cleanups (Dan Carpenter, Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus Villemoes)" * tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits) cpufreq: postfix policy directory with the first CPU in related_cpus cpufreq: create cpu/cpufreq/policyX directories cpufreq: remove cpufreq_sysfs_{create|remove}_file() cpufreq: create cpu/cpufreq at boot time cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate() PM / Domains: Merge measurements for PM QoS device latencies PM / Domains: Don't measure ->start|stop() latency in system PM callbacks PM / clk: Fix broken build due to non-matching code and header #ifdefs ACPI / Documentation: add copy_dsdt to ACPI format options ACPI / sysfs: correctly check failing memory allocation ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405 ACPI / CPPC: Fix potential memory leak ACPI / CPPC: signedness bug in register_pcc_channel() ACPI / PAD: power_saving_thread() is not freezable ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle ACPI: Using correct irq when waiting for events ACPI: Use correct IRQ when uninstalling ACPI interrupt handler cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver cpuidle: mvebu: clean up multiple platform drivers ...
2015-11-04Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
2015-11-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement delivers: - Rework the irqdomain core infrastructure to accomodate ACPI based systems. This is required to support ARM64 without creating artificial device tree nodes. - Sanitize the ACPI based ARM GIC initialization by making use of the new firmware independent irqdomain core - Further improvements to the generic MSI management - Generalize the irq migration on CPU hotplug - Improvements to the threaded interrupt infrastructure - Allow the migration of "chained" low level interrupt handlers - Allow optional force masking of interrupts in disable_irq[_nosysnc] - Support for two new interrupt chips - Sigh! - A larger set of errata fixes for ARM gicv3 - The usual pile of fixes, updates, improvements and cleanups all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) Document that IRQ_NONE should be returned when IRQ not actually handled PCI/MSI: Allow the MSI domain to be device-specific PCI: Add per-device MSI domain hook of/irq: Use the msi-map property to provide device-specific MSI domain of/irq: Split of_msi_map_rid to reuse msi-map lookup irqchip/gic-v3-its: Parse new version of msi-parent property PCI/MSI: Use of_msi_get_domain instead of open-coded "msi-parent" parsing of/irq: Use of_msi_get_domain instead of open-coded "msi-parent" parsing of/irq: Add support code for multi-parent version of "msi-parent" irqchip/gic-v3-its: Add handling of PCI requester id. PCI/MSI: Add helper function pci_msi_domain_get_msi_rid(). of/irq: Add new function of_msi_map_rid() Docs: dt: Add PCI MSI map bindings irqchip/gic-v2m: Add support for multiple MSI frames irqchip/gic-v3: Fix translation of LPIs after conversion to irq_fwspec irqchip/mxs: Add Alphascale ASM9260 support irqchip/mxs: Prepare driver for hardware with different offsets irqchip/mxs: Panic if ioremap or domain creation fails irqdomain: Documentation updates irqdomain/msi: Use fwnode instead of of_node ...
2015-11-01gpio: fix up SPI submenuLinus Walleij
- Relax dependencies on SPI_MASTER for drivers in the SPI menu that already has this dependency. - Move out the expander that would be hidden for I2C access if SPI_MASTER was not selected. Tentatively create a separate menu for this. - Move the ZX SoC driver to memory-mapped drivers, this must be a mistake and only worked because the system has an SPI master enabled at the same time. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-01gpio: drop surplus I2C dependenciesLinus Walleij
The I2C expander menu already depends on I2C, drop subdependecies on individual drivers. Keep the instances of depends on I2C=y though, so these are still restricted to the compiled-in case. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-01gpio: drop surplus X86 dependenciesLinus Walleij
Port-mapped I/O depends on X86 already, so individual drivers need not specify this dependency. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-31gpio / ACPI: Allow shared GPIO event to be read via operation regionMika Westerberg
In Microsoft Surface3 the GPIO detecting lid state is shared between GPIO event and operation region. Below is simplied version of the DSDT from Surface3 including relevant parts: Scope (GPO0) { Name (_AEI, ResourceTemplate () { GpioInt (Edge, ActiveBoth, Shared, PullNone, 0x0000, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } }) OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } } When GPIO 0x4c changes we call ASL method _E4C which tries to read HELD field (the same GPIO). This triggers following error on the console: ACPI Error: Method parse/execution failed [\_SB.GPO0._E4C] (Node ffff88013f4b4438), AE_ERROR (20150930/psparse-542) The error happens because ACPI GPIO operation region handler (acpi_gpio_adr_space_handler()) tries to acquire the very same GPIO which returns an error (-EBUSY) because the GPIO is already reserved for the GPIO event. Fix this so that we "borrow" the event GPIO if we find the GPIO belongs to an event. Allow this only for GPIOs that are read. To be able to go through acpi_gpio->events list for operation region access we need to make sure the list is properly initialized whenever GPIO chip is registered. Link: https://bugzilla.kernel.org/show_bug.cgi?id=106571 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-31gpio: group port-mapped I/O drivers in a menuLinus Walleij
Create a Kconfig submenu for drivers using X86 port-mapped I/O and depend on X86 for this. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Andreas Bofjall <andreas@gazonk.org> Cc: Diego Elio Pettenò <flameeyes@flameeyes.eu> Cc: Daniel Krueger <daniel.krueger@systec-electronic.com> Cc: Bruno Randolf <br1@einfach.org> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-27gpio: xilinx: Drop architecture dependenciesSoren Brinkmann
The driver does not have any real architecture dependencies. To avoid listing each architecture that might use this driver on some FPGA-enabled platform, drop these dependencies. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-27gpio: generic: Revert to old error handling in bgpio_mapGuenter Roeck
Returning an error instead of NULL in bgpio_map if platform_get_resource_byname does not find a resource was introduced with commit cf3f2a2c8bae ("gpio: generic: improve error handling in bgpio_map"). This results in several qemu runtime failures with default and non-default configurations, if attempts are made to boot from mmcblk0. Examples for failures with multi_v7_defconfig are Machine: vexpress-a9 dtb: vexpress-v2p-ca9 Machine: vexpress-a15 dtb: vexpress-v2p-ca15-tc1 Crash: VFS: Cannot open root device "mmcblk0" or unknown-block(0,0): error -6 Please append a correct "root=" boot option; here are the available partitions: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) Looking into the code, always returning an error if bgpio_map fails does not appear to make much sense, since the code in bgpio_setup_io specifically supports some of the resources to be NULL. Fixes: cf3f2a2c8bae ("gpio: generic: improve error handling in bgpio_map") Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-27gpio: Add GPIO support for the ACCES 104-IDIO-16William Breathitt Gray
The ACCES 104-IDIO-16 family of PC/104 utility boards feature 16 optically isolated inputs and 16 optically isolated FET solid state outputs. This driver provides GPIO support for these 32 channels of digital I/O. Change-of-State detection interrupts are not supported. GPIO 0-15 correspond to digital outputs 0-15, while GPIO 16-31 correspond to digital inputs 0-15. The base port address for the device may be set via the idio_16_base module parameter. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-26gpio: driver for AMD PromontoryYD Tseng
This patch adds a new GPIO driver for AMD Promontory chip. This GPIO controller is enumerated by ACPI and the ACPI compliant hardware ID is AMDF030. Change history: v2: 1. fix coding style 2. registers renaming v3: 1. change include file 2. fix coding style 3. remove module_init/exit, add module_platform_driver 4. remove MODULE_ALIAS v4: 1. change TOTAL_GPIO_PINS to PT_TOTAL_GPIO 2. remove PCI dependency in Kconfig 3. fix subject line Signed-off-by: YD Tseng <Yd_Tseng@asmedia.com.tw> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-25Merge branch 'device-properties'Rafael J. Wysocki
* device-properties: ACPI / property: Fix subnode lookup scope for data-only subnodes acpi-dma: Add support for "dma-names" device property device property: Add fwnode_property_match_string() ACPI / property: Extend device_get_next_child_node() to data-only nodes ACPI / gpio: Split acpi_get_gpiod_by_index() ACPI / property: Extend fwnode_property_* to data-only subnodes ACPI / property: Expose data-only subnodes via sysfs ACPI / property: Add support for data-only subnodes ACPI / property: Add routine for extraction of _DSD properties
2015-10-22gpio: xlp: Convert to use gpiolib irqchip helpersKamlakant Patel
commit "325f0a (MIPS: Netlogic: Use chip_data for irq_chip methods)" Updates "mips/netlogic/common/irq.c" to use chip_data to store interrupt controller data pointer. Before this commit handler_data was used to store interrupt controller data which caused errors while using gpiochip_set_chained_irqchip. Update XLP GPIO driver to use the gpiolib irqchip helpers. And add missing depends on OF_GPIO in Kconfig. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>