summaryrefslogtreecommitdiff
path: root/drivers/ide
AgeCommit message (Collapse)Author
2008-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (36 commits) ide: re-add TRM290 fix lost during ide_build_dmatable() cleanup scc_pata: kill unused variables sgiioc4: kill duplicate ioremap() sgiioc4: kill useless address checks delkin_cb: add PM support ide: remove broken hpt34x driver ide-floppy: remove idefloppy_floppy_t typedef sgiioc4: remove maskproc() method hpt366: cleanup maskproc() method ide: mask interrupt in ide_config_drive_speed() hpt366: fix compile warning ide: remove unused macros from <asm-parisc/ide.h> ide: remove M68K_IDE_SWAPW define from <asm-m68k/ide.h> ide: remove dead <asm-arm/arch-sa1100/ide.h> ide: fix support for IDE PCI controllers using MMIO on frv ide-cd: remove stale comment ide-cd: small drive type print fix ide-cd: debug log enhancements ide: add generic ATA/ATAPI disk driver ide: allow device drivers to specify per-device type /proc settings ...
2008-10-17ide: re-add TRM290 fix lost during ide_build_dmatable() cleanupBartlomiej Zolnierkiewicz
commit 14c123f37187aba0b4e0e893a969efc6820c4170 ("ide: cleanup ide_build_dmatable()") accidentally reverted TRM290 fix introduced by commit 22e05b4549bf2405d6aca128540b20cd2dd33f1f ("ide-dma: fix ide_build_dmatable() for TRM290"). Reported-by: Sergei Shtylylov <sshtylyov@ru.mvista.com> Acked-by: Sergei Shtylylov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17scc_pata: kill unused variablesSergei Shtylyov
Fix the "unused variable" warning in init_hwif_scc() caused by the commit 48c3c1072651922ed153bcf0a33ea82cf20df390 (ide: add struct ide_host (take 3)). Moreover, remove the write-only variable 'dma_status_port' in init_setup_scc() about which gcc gives no warning and which has been there from the very start... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17sgiioc4: kill duplicate ioremap()Sergei Shtylyov
By the time ide_dma_sgiioc4() gets called, sgiioc4_ide_setup_pci_device() will have called ioremap() on the whole BAR0 region, so calling ioremap() on the DMA registers means wasting a page. Replace this call by a mere address calculation, based on the fact that IRQ registers (pointed to by 'hwif->io_ports.irq_addr') are situated at offset 0 from BAR0. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17sgiioc4: kill useless address checksSergei Shtylyov
The driver performs a number of checks on the virtual/physical addresses which would always evaluate as true (except ide_dma_sgiioc4() -- always false): - for sgiioc4_init_hwif_ports(), its caller, sgiioc4_ide_setup_pci_device(), guarantees that 'ctrl_port' and 'irq_port' parameters are never 0; - in sgiioc4_read_status(), we always read the IDE status register, so there's no need to check the register's address (must be a leftover from the times when this function implemented the INB() method); - in ide_dma_sgiioc4(), 'dma_base' can never be 0 as IOC4_DMA_OFFSET is not 0. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17delkin_cb: add PM supportBartlomiej Zolnierkiewicz
* Factor out chipset initialization code from delkin_cb_probe() to delkin_cb_init_chipset(). * Assign ->init_chipset in struct delkin_cb_port_info. * Add delkin_cb_{suspend,resume}() (->suspend/->resume methods). Fixes kernel bugzilla bug #11735: http://bugzilla.kernel.org/show_bug.cgi?id=11735 Tested-by: bumble.bee@xs4all.nl Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide: remove broken hpt34x driverBartlomiej Zolnierkiewicz
No big loss since HPT343/363 controllers are properly supported by pata_hpt3x3 driver from Alan Cox. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-floppy: remove idefloppy_floppy_t typedefBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17sgiioc4: remove maskproc() methodSergei Shtylyov
Since the maskproc() method calls either mirror the interrupt en/disable via the nIEN bit of the device control register done by the IDE core before issuing a command or unmask the interrupt after a command executed in polled mode (when interrupt is already not expected), it is pointless to implement this method by manipulating the nIEN bit... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17hpt366: cleanup maskproc() methodSergei Shtylyov
Since the maskproc() method calls either mirror the interrupt en/disable via the nIEN bit of the device control register done by the IDE core before issuing a command or unmask the interrupt after a command executed in polled mode (when interrupt is already not expected), it is pointless to manipulate the nIEN bit in this method; therefore, just do nothing for the drives not on the quirk list. Move the code to the left by using an early return and the 'else if' construct, while at it.... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> [bart: fix checkpatch.pl warning] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide: mask interrupt in ide_config_drive_speed()Sergei Shtylyov
Apparently, there is no sense in unmasking IRQ on the controller when you call disable_irq_nosync() before doing this, set the nIEN bit afterwards, and then unmask IRQ again after the command completion, hence 0 passed to SELECT_MASK() before issuing the command in ide_config_drive_speed() is probably just a typo. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17hpt366: fix compile warningBartlomiej Zolnierkiewicz
Fixup for commit 1785192b5310ee25165768f5bb80f13146788e3e ("hpt366: add hpt3xx_disable_fast_irq() helper"):    CC      drivers/ide/pci/hpt366.o drivers/ide/pci/hpt366.c: In function `init_hwif_hpt366': drivers/ide/pci/hpt366.c:1290: warning: unused variable `dev' Reported-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-cd: remove stale commentBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> [bart: split-up this change from a bigger patch] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-cd: small drive type print fixBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-cd: debug log enhancementsBorislav Petkov
Add some more verbosity to key function calls in ide-cd debug code. While at it, delete a superfluous comment. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide: add generic ATA/ATAPI disk driverBartlomiej Zolnierkiewicz
* Add struct ide_disk_ops containing protocol specific methods. * Add 'struct ide_disk_ops *' to ide_drive_t. * Convert ide-{disk,floppy} drivers to use struct ide_disk_ops. * Merge ide-{disk,floppy} drivers into generic ide-gd driver. While at it: - ide_disk_init_capacity() -> ide_disk_get_capacity() Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide: allow device drivers to specify per-device type /proc settingsBartlomiej Zolnierkiewicz
Turn ide_driver_t's 'proc' field into ->proc_entries method (and also 'settings' field into ->proc_devsets method). Then update all device drivers accordingly. There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide: prepare for merging ide-gd-floppy.c with ide-gd.cBartlomiej Zolnierkiewicz
- idefloppy_ref_mutex -> ide_disk_ref_mutex - idefloppy_cleanup_obj() -> ide_disk_release() - ide_floppy_get() -> ide_disk_get() - ide_floppy_put() -> ide_disk_put() - ide_floppy_capacity() -> ide_gd_capacity() - ide_floppy_remove() -> ide_gd_remove() - ide_floppy_probe() -> ide_gd_probe() - idefloppy_driver -> ide_gd_driver - idefloppy_open() -> ide_gd_open() - idefloppy_release() -> ide_gd_release() - idefloppy_getgeo() -> ide_gd_getgeo() - idefloppy_media_changed() -> ide_gd_media_changed() - idefloppy_revalidate_disk() -> ide_gd_revalidate_disk() - idefloppy_ops -> ide_gd_ops - idefloppy_init() -> ide_gd_init() - idefloppy_exit() -> ide_gd_exit() - 'floppy' -> 'idkp' in ide_disk_*() and ide_gd_*() - idefloppy_floppy_t -> struct ide_floppy_obj There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-floppy: factor out generic disk handling code to ide-gd-floppy.cBartlomiej Zolnierkiewicz
While at it: - idefloppy_do_request() -> ide_floppy_do_request() - idefloppy_end_request() -> ide_floppy_end_request() - idefloppy_setup() -> ide_floppy_setup() There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-disk: use IDE_DFLAG_MEDIA_CHANGEDBartlomiej Zolnierkiewicz
Set IDE_DFLAG_MEDIA_CHANGED in ide_gd_open() to signalize ide_gd_media_changed() that that media has changed (instead of relying on IDE_DFLAG_REMOVABLE). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-disk: factor out generic disk handling code to ide-gd.cBartlomiej Zolnierkiewicz
While at it: - IDEDISK_VERSION -> IDE_GD_VERSION - ide_cacheflush_p() -> ide_disk_flush() - init_idedisk_capacity() -> ide_disk_init_capacity() - idedisk_set_doorlock() -> ide_disk_set_doorlock() - idedisk_setup() -> ide_disk_setup() - ide_disk_capacity() -> ide_gd_capacity() - ide_disk_remove() -> ide_gd_remove() - ide_disk_probe() -> ide_gd_probe() - ide_disk_resume() -> ide_gd_resume() - ide_device_shutdown() -> ide_gd_shutdown() - idedisk_driver -> ide_gd_driver - idedisk_open() -> ide_gd_open() - idedisk_release() -> ide_gd_release() - idedisk_getgeo() -> ide_gd_getgeo() - idedisk_media_changed() -> ide_gd_media_changed() - idedisk_revalidate_disk() -> ide_gd_revalidate_disk() - idedisk_ops -> ide_gd_ops - idedisk_init() -> ide_gd_init() - idedisk_exit() -> ide_gd_exit() There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide: remove IDE_AFLAG_NO_DOORLOCKINGBartlomiej Zolnierkiewicz
Just use IDE_DFLAG_DOORLOCKING instead. There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide: IDE_AFLAG_FORMAT_IN_PROGRESS -> IDE_DFLAG_FORMAT_IN_PROGRESSBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide: IDE_AFLAG_WP -> IDE_DFLAG_WPBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide: IDE_AFLAG_MEDIA_CHANGED -> IDE_DFLAG_MEDIA_CHANGEDBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-floppy: use drive->capacity64 for caching current capacityBartlomiej Zolnierkiewicz
* Use drive->capacity64 for caching current capacity. * Switch ide_floppy_capacity() to use drive->capacity64. * Call set_capacity() in idefloppy_open() and ide_floppy_probe() instead of ide_floppy_get_capacity(). There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-floppy: drop 'floppy' argument from idefloppy_setup()Bartlomiej Zolnierkiewicz
Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-{disk,floppy}: set IDE_DFLAG_ATTACH in *_setup()Bartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-disk: move IDE_DFLAG_DOORLOCKING flag handling to idedisk_set_doorlock()Bartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-disk: use to_ide_drv() and ide_drv_g()Bartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-floppy: use alloc_disk_node()Bartlomiej Zolnierkiewicz
Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-disk: lock media before checking for media changeBartlomiej Zolnierkiewicz
Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-disk: fix IDE_DFLAG_LBA48 handling on resumeBartlomiej Zolnierkiewicz
Some code in idedisk_setup() should be in idedisk_capacity() instead. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17block: remove __generic_unplug_device() from exportsJens Axboe
The only out-of-core user is IDE, and that should be using blk_start_queueing() instead. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits) UIO: Fix mapping of logical and virtual memory UIO: add automata sercos3 pci card support UIO: Change driver name of uio_pdrv UIO: Add alignment warnings for uio-mem Driver core: add bus_sort_breadthfirst() function NET: convert the phy_device file to use bus_find_device_by_name kobject: Cleanup kobject_rename and !CONFIG_SYSFS kobject: Fix kobject_rename and !CONFIG_SYSFS sysfs: Make dir and name args to sysfs_notify() const platform: add new device registration helper sysfs: use ilookup5() instead of ilookup5_nowait() PNP: create device attributes via default device attributes Driver core: make bus_find_device_by_name() more robust usb: turn dev_warn+WARN_ON combos into dev_WARN debug: use dev_WARN() rather than WARN_ON() in device_pm_add() debug: Introduce a dev_WARN() function sysfs: fix deadlock device model: Do a quickcheck for driver binding before doing an expensive check Driver core: Fix cleanup in device_create_vargs(). Driver core: Clarify device cleanup. ...
2008-10-16Kconfig: eliminate "def_bool n" constructsJan Beulich
Using "def_bool n" is pointless, simply using bool here appears more appropriate. Further, retaining such options that don't have a prompt and aren't selected by anything seems also at least questionable. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16device create: ide: convert device_create_drvdata to device_createGreg Kroah-Hartman
Now that device_create() has been audited, rename things back to the original call to be sane. Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (66 commits) ata: Add documentation for hard disk shock protection interface (v3) ide: Implement disk shock protection support (v4) ide-cd: fix printk format warning piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list ide-atapi: assign taskfile flags per device type ide-cd: move cdrom_info.dma to ide_drive_t.dma ide: add ide_drive_t.dma flag ide-cd: add a debug_mask module parameter ide-cd: convert driver to new ide debugging macro (v3) ide: move SFF DMA code to ide-dma-sff.c ide: cleanup ide-dma.c ide: cleanup ide_build_dmatable() ide: remove needless includes from ide-dma.c ide: switch to DMA-mapping API part #2 ide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n ide: __ide_dma_end() -> ide_dma_end() pmac: remove needless pmac_ide_destroy_dmatable() wrapper pmac: remove superfluous pmif == NULL checks ide: Two fixes regarding memory allocation ...
2008-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits) pcmcia: ioctl-internal definitions pcmcia: cistpl header cleanup pcmcia: remove unused argument to pcmcia_parse_tuple() pcmcia: card services header cleanup pcmcia: device_id header cleanup pcmcia: encapsulate ioaddr_t pcmcia: cleanup device driver header file pcmcia: cleanup socket services header file pcmcia: merge ds_internal.h into cs_internal.h pcmcia: cleanup cs_internal.h pcmcia: cs_internal.h is internal pcmcia: use dev_printk for cs_error() pcmcia: remove CS_ error codes alltogether pcmcia: deprecate CS_BAD_TUPLE pcmcia: deprecate CS_BAD_ARGS pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE pcmcia: deprecate CS_NO_MORE_ITEMS pcmcia: deprecate CS_IN_USE pcmcia: deprecate CS_CONFIGURATION_LOCKED ... Fix trivial conflict in drivers/pcmcia/ds.c manually
2008-10-13ide: Implement disk shock protection support (v4)Elias Oltmanns
On user request (through sysfs), the IDLE IMMEDIATE command with UNLOAD FEATURE as specified in ATA-7 is issued to the device and processing of the request queue is stopped thereafter until the specified timeout expires or user space asks to resume normal operation. This is supposed to prevent the heads of a hard drive from accidentally crashing onto the platter when a heavy shock is anticipated (like a falling laptop expected to hit the floor). Port resets are deferred whenever a device on that port is in the parked state. v3: Elias Oltmanns <eo@nebensachen.de> wrote: [...] > >> 1. Make sure that no negative value is being passed to > >> jiffies_to_msecs() in ide_park_show(). > >> 2. Drop the superfluous variable hwif in ide_special_rq(). > >> 3. Skip initialisation of task and tf in ide_special_rq() if we are not > >> handling a (un)park request. > > > > Well, #3 should have been done differently because we donn't want to > > check for REQ_(UN)?PARK_HEADS more often than is necessary. > > While preparing the backport to 2.6.27, it has just occurred to me that > we need to clear the IDE_DFLAG_PARKED flag in ide_disk_pre_reset() > because this flag must not be set after *any* sort of access to the > device. v4: Fix a memory leak due to a missing blk_put_request() in issue_park_cmd(). Additionally, we should plug the queue when enqueueing the unpark request because there is no guarantee that the park timeout has not expired by then. Even though the chance for that to happen is very slim, the request might end up hanging in the queue until the next I/O operation is queued up. While at it, clean up the code a little: - make issue_park_cmd() a function of type void since nobody cares for the return value anyway; - use blk_start_queueing() instead of __blk_run_queue() since we don't have to worry about recursion; - remove a superfluous pointer deference in task_no_data_intr(). Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Cc: Jeff Garzik <jeff@garzik.org>, Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-cd: fix printk format warningAlexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13piix: add Hercules EC-900 mini-notebook to ich_laptop short cable listHerton Ronaldo Krzesinski
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-atapi: assign taskfile flags per device typeBorislav Petkov
There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-cd: move cdrom_info.dma to ide_drive_t.dmaBorislav Petkov
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add ide_drive_t.dma flagBorislav Petkov
This flag is to accomodate ide-cd functionality into ide atapi. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-cd: add a debug_mask module parameterBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> [bart: no need to zero debug_mask + move it next to module_param()] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-cd: convert driver to new ide debugging macro (v3)Borislav Petkov
Also, - leave in the possibility for optimizing away all debugging macros - add a PFX macro and prepend all printk calls with it for consistency - add debug macro calls in important driver paths - remove #if 0-ed code - mv restore_request -> ide_cd_restore_request - add a driver registration printk v2: failed_command can be NULL so check it before accessing it v3: fix another NULL ptr in debug statement There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: move SFF DMA code to ide-dma-sff.cBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: cleanup ide-dma.cBartlomiej Zolnierkiewicz
- s/HWIF(drive)/drive->hwif/ - s/HWGROUP(drive)/[drive->]hwif->hwgroup/ - fixup error messages in ide_dma_intr() & dma_timer_expiry() - fix checkpatch.pl errors/warnings Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: cleanup ide_build_dmatable()Bartlomiej Zolnierkiewicz
- use for_each_sg() - move printing 'DMA table too small' message below use_pio_instead label - merge '64KB bug' comment with function documentation - fix intendation There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 17:32:03 +0000