summaryrefslogtreecommitdiff
path: root/drivers/ide
AgeCommit message (Collapse)Author
2009-12-08Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (54 commits) Revert "pata_sis: Implement MWDMA for the UDMA 133 capable chips" libata: Clarify ata_set_lba_range_entries function libata: Report zeroed read after TRIM and max discard size pata_hpt3x2n: fix overclocked MWDMA0 timing pata_it8213: MWDMA0 is unsupported [libata] MWDMA0 is unsupported on PIIX-like PATA controllers pata_via: clear UDMA transfer mode bit for PIO and MWDMA pata_sis: Power Management fix pata_rz1000: Power Management fix pata_radisys: fix UDMA handling pata_ns87415: Power Management fix pata_marvell: fix marvell_pre_reset() documentation pata_legacy: add pointers to QDI65x0 documentation pata_legacy: fix access to control register for QDI6580 pata_legacy: fix QDI6580DP support pata_it8213: fix it8213_pre_reset() documentation pata_it8213: fix wrong MWDMA timings being programmed pata_it8213: fix PIO2 underclocking pata_it8213: fix wrong PIO timings being programmed pata_it8213: fix UDMA handling ...
2009-12-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (50 commits) pcmcia: rework the irq_req_t typedef pcmcia: remove deprecated handle_to_dev() macro pcmcia: pcmcia_request_window() doesn't need a pointer to a pointer pcmcia: remove unused "window_t" typedef pcmcia: move some window-related code to pcmcia_ioctl.c pcmcia: Change window_handle_t logic to unsigned long pcmcia: Pass struct pcmcia_socket to pcmcia_get_mem_page() pcmcia: Pass struct pcmcia_device to pcmcia_map_mem_page() pcmcia: Pass struct pcmcia_device to pcmcia_release_window() drivers/pcmcia: remove unnecessary kzalloc pcmcia: correct handling for Zoomed Video registers in topic.h pcmcia: fix printk formats pcmcia: autoload module pcmcia pcmcia/staging: update comedi drivers PCMCIA: stop duplicating pci_irq in soc_pcmcia_socket PCMCIA: ss: allow PCI IRQs > 255 PCMCIA: soc_common: remove 'dev' member from soc_pcmcia_socket PCMCIA: soc_common: constify soc_pcmcia_socket ops member PCMCIA: sa1111: remove duplicated initializers PCMCIA: sa1111: wrap soc_pcmcia_socket to contain sa1111 specific data ...
2009-12-03pata_piccolo: Driver for old Toshiba chipsetsAlan Cox
We were never able to get docs for this out of Toshiba for years. Dave Barnes produced a NetBSD driver however and from that we can fill in the needed tables. As we correct the PCI identifiers a bit also update the old ide generic driver at the same time so it stays compiling. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-11-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide: fix ioctl to pass requested transfer mode to ide_find_dma_mode instead of UDMA6
2009-11-28pcmcia: rework the irq_req_t typedefDominik Brodowski
Most of the irq_req_t typedef'd struct can be re-worked quite easily: (1) IRQInfo2 was unused in any case, so drop it. (2) IRQInfo1 was used write-only, so drop it. (3) Instance (private data to be passed to the IRQ handler): Most PCMCIA drivers using pcmcia_request_irq() to actually register an IRQ handler set the "dev_id" to the same pointer as the "priv" pointer in struct pcmcia_device. Modify the two exceptions (ipwireless, ibmtr_cs) to also work this waym and set the IRQ handler's "dev_id" to p_dev->priv unconditionally. (4) Handler is to be of type irq_handler_t. (5) Handler != NULL already tells whether an IRQ handler is present. Therefore, we do not need the IRQ_HANDLER_PRESENT flag in irq_req_t.Attributes. CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-scsi@vger.kernel.org CC: alsa-devel@alsa-project.org CC: Jaroslav Kysela <perex@perex.cz> CC: Jiri Kosina <jkosina@suse.cz> CC: Karsten Keil <isdn@linux-pingi.de> for the Bluetooth parts: Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-25ide: fix ioctl to pass requested transfer mode to ide_find_dma_mode instead ↵Hemant Pedanekar
of UDMA6 Currently, ide_cmd_ioctl when invoked for setting DMA transfer mode calls ide_find_dma_mode with requested mode as XFER_UDMA_6. This prevents setting DMA mode to any other value than the default (maximum) supported by the device (or UDMA6, if supported) irrespective of the actual requested transfer mode and returns error. For example, setting mode to UDMA2 using hdparm, where UDMA4 is the default transfer mode gives following error: # ./hdparm -d1 -Xudma2 /dev/hda /dev/hda:hda: UDMA/66 mode selected setting using_dma to 1 (on) hda: UDMA/66 mode selected setting xfermode to 66 (UltraDMA mode2) HDIO_DRIVE_CMD(setxfermode) failed: Invalid argument using_dma = 1 (on) This patch fixes the issue. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: Revert "ide: try to use PIO Mode 0 during probe if possible"
2009-11-08pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ide)Dominik Brodowski
ide-cs.c is the only PCMCIA device driver making use of CONFIG_PCMCIA_DEBUG, so convert it to use the dynamic debug infrastructure. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-06Revert "ide: try to use PIO Mode 0 during probe if possible"David S. Miller
This reverts commit 6029336426a2b43e4bc6f4a84be8789a047d139e. Ok, we really do need to revert this, even with Bart's sis5513.c fix in there. The problem is that several driver's ->set_pio_mode() method depends upon the drive->media type being set properly. Most of them use this to enable prefetching, which can only be done for disk media. But the commit being reverted here calls ->set_pio_mode() before it's setup. Actually it considers everything disk because that is the default media type set by ide_port_init_devices_data(). The set of drivers that depend upon the media type in their ->set_pio_method() are: drivers/ide/alim15x3.c drivers/ide/it8172.c drivers/ide/it8213.c drivers/ide/pdc202xx_old.c drivers/ide/piix.c drivers/ide/qd65xx.c drivers/ide/sis5513.c drivers/ide/slc90e66.c And it is possible that we could fix this by guarding the prefetching and other media dependent setting changes with a test on IDE_PFLAG_PROBING in hwif->port_flags, that's simply too risky for 2.6.32-rcX and -stable. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide: Serialize CMD643 and CMD646 to fix a hardware bug with SSD
2009-10-29ide: Serialize CMD643 and CMD646 to fix a hardware bug with SSDMikulas Patocka
CMD646 corrupts data on concurrent transfers on both channels when IDE SSD is connected to one of the channels. Setup that demonstrates this hardware bug: Ultra 5, onboard CMD646, rev 3. /dev/hda is 8GB Seagate ST38410A in MWDMA2 /dev/hdd is 32GB SSD SiliconHardDisk in MWDMA2 - When reading /dev/hdd (for example with dd or fsck), reads from /dev/hda are corrupted, there are twiddled single bits 1->0 and some full 32-bit words corrupted, sometimes commands fail (which switches /dev/hda to PIO mode but the corruptions happen even in PIO). - Reads from /dev/hdd don't seem to be corrupted (i.e. fsck passes fine). - When I connected normal rotating harddisk to /dev/hdd, there was no corruption, so the corruption is something specific to SSD. - I tried the same setup on a PCI card with CMD649 and saw no corruption. This patch serializes the operation for CMD646 and 643 (I didn't test CMD643 but it may have the same hw bug too because it's earlier design). CMD649 is good. I don't know anything about CMD 648. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Frans Pop <elendil@planet.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-16ahci / atiixp / pci quirks: rename AMD SB900 into Hudson-2Shane Huang
This patch renames the code name SB900 into Hudson-2 Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: Revert "Revert "ide: try to use PIO Mode 0 during probe if possible"" sis5513: fix PIO setup for ATAPI devices
2009-10-07Revert "Revert "ide: try to use PIO Mode 0 during probe if possible""Bartlomiej Zolnierkiewicz
This reverts commit 24df31acaff8465d797f0006437b45ad0f2a5cb1. The root cause of reported system hangs was (now fixed) sis5513 bug and not "ide: try to use PIO Mode 0 during probe if possible" change (commit 6029336426a2b43e4bc6f4a84be8789a047d139e) so the revert was incorrect (it simply replaced one regression with the other one). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07sis5513: fix PIO setup for ATAPI devicesBartlomiej Zolnierkiewicz
Clear prefetch setting before potentially (re-)enabling it in config_drive_art_rwp() so the transition of the device type on the port from ATA to ATAPI (i.e. during warm-plug operation) is handled correctly. This is a really old bug (it probably goes back to very early days of the driver) but it was only affecting warm-plug operation until the recent "ide: try to use PIO Mode 0 during probe if possible" change (commit 6029336426a2b43e4bc6f4a84be8789a047d139e). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Tested-by: David Fries <david@fries.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: Revert "ide: try to use PIO Mode 0 during probe if possible" ide: use printk_once
2009-10-04Revert "ide: try to use PIO Mode 0 during probe if possible"David S. Miller
This reverts commit 6029336426a2b43e4bc6f4a84be8789a047d139e. Based upon a report by David Fries, wherein his system hangs on bootup with sis5513 controller, right after the CDROM is registered by ide-cd.c and the TOC is first read. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-23Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (119 commits) ACPI: don't pass handle for fixed hardware notifications ACPI: remove null pointer checks in deferred execution path ACPI: simplify deferred execution path acerhdf: additional BIOS versions acerhdf: convert to dev_pm_ops acerhdf: fix fan control for AOA150 model thermal: add missing Kconfig dependency acpi: switch /proc/acpi/{debug_layer,debug_level} to seq_file hp-wmi: fix rfkill memory leak on unload ACPI: remove unnecessary #ifdef CONFIG_DMI ACPI: linux/acpi.h should not include linux/dmi.h hwmon driver for ACPI 4.0 power meters topstar-laptop: add new driver for hotkeys support on Topstar N01 thinkpad_acpi: fix rfkill memory leak on unload thinkpad-acpi: report brightness events when required thinkpad-acpi: don't poll by default any of the reserved hotkeys thinkpad-acpi: Fix procfs hotkey reset command thinkpad-acpi: deprecate hotkey_bios_mask thinkpad-acpi: hotkey poll fixes thinkpad-acpi: be more strict when detecting a ThinkPad ...
2009-09-22ide: use printk_onceMarcin Slusarz
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) trivial: fix typo in aic7xxx comment trivial: fix comment typo in drivers/ata/pata_hpt37x.c trivial: typo in kernel-parameters.txt trivial: fix typo in tracing documentation trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c trivial: remove unnecessary semicolons trivial: Fix duplicated word "options" in comment trivial: kbuild: remove extraneous blank line after declaration of usage() trivial: improve help text for mm debug config options trivial: doc: hpfall: accept disk device to unload as argument trivial: doc: hpfall: reduce risk that hpfall can do harm trivial: SubmittingPatches: Fix reference to renumbered step trivial: fix typos "man[ae]g?ment" -> "management" trivial: media/video/cx88: add __init/__exit macros to cx88 drivers trivial: fix typo in CONFIG_DEBUG_FS in gcov doc trivial: fix missing printk space in amd_k7_smp_check trivial: fix typo s/ketymap/keymap/ in comment trivial: fix typo "to to" in multiple files trivial: fix typos in comments s/DGBU/DBGU/ ...
2009-09-22const: make block_device_operations constAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-21trivial: remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-19Merge branch 'acpica' into releaseLen Brown
2009-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6: ide: fixup for fujitsu disk ide: convert to ->proc_fops at91_ide: remove headers specific for at91sam9263 IDE: palm_bk3710: convert clock usage after clkdev conversion ide: fix races in handling of user-space SET XFER commands ide: allow ide_dev_read_id() to be called from the IRQ context ide: ide-taskfile.c fix style problems drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST ide-tape: fix handling of postponed rqs ide-tape: convert to ide_debug_log macro ide-tape: fix debug call ide: Fix annoying warning in ide_pio_bytes(). IDE: Save a call to PageHighMem()
2009-09-15ide: fixup for fujitsu diskWu Zhangjin
This patch will fix the following problem on Yeeloong netbook with fujitsu disk. irq 14: nobody cared (try booting with the "irqpoll" option) Call Trace: [<ffffffff8020d438>] dump_stack+0x8/0x40 [<ffffffff8027ec64>] __report_bad_irq+0x58/0xe4 [<ffffffff8027ee6c>] note_interrupt+0x17c/0x23c [<ffffffff8027f9b8>] handle_level_irq+0xcc/0x134 [<ffffffff802125b0>] mach_irq_dispatch+0xb8/0x1e0 [<ffffffff8020041c>] ret_from_irq+0x0/0x4 [<ffffffff8029e678>] free_hot_cold_page+0x224/0x2a0 [<ffffffff8026f794>] swsusp_free+0xb0/0x14c [<ffffffff8026ec08>] hibernate+0x198/0x218 [<ffffffff8026cfa8>] state_store+0x90/0x138 [<ffffffff8032b5a4>] sysfs_write_file+0x130/0x194 [<ffffffff802c94fc>] vfs_write+0xb8/0x180 [<ffffffff802c96b8>] SyS_write+0x50/0x98 [<ffffffff80203fd8>] handle_sys+0x158/0x174 handlers: [<ffffffff80429670>] (ide_intr+0x0/0x300) Disabling IRQ #14 References: 1. commit 1fde02e7146d4a1bab80fd1506f9018fe71e8521 of git://dev.lemote.com/linux_loongson.git 2. 8bc1e5aa06a2a9a425c4a6795fc564cba1521487 (ide: respect quirk_drives[] list on all controllers) Signed-off-by: Yan Hua <yanh@lemote.com> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (25 commits) pata_rz1000: use printk_once ahci: kill @force_restart and refine CLO for ahci_kick_engine() pata_cs5535: add pci id for AMD based CS5535 controllers ahci: Add AMD SB900 SATA/IDE controller device IDs drivers/ata: use resource_size sata_fsl: Defer non-ncq commands when ncq commands active libata: add SATA PMP revision information for spec 1.2 libata: fix off-by-one error in ata_tf_read_block() ahci: Gigabyte GA-MA69VM-S2 can't do 64bit DMA ahci: make ahci_asus_m2a_vm_32bit_only() quirk more generic dmi: extend dmi_get_year() to dmi_get_date() dmi: fix date handling in dmi_get_year() libata: unbreak TPM filtering by reorganizing ata_scsi_pass_thru() sata_sis: convert to slave_link sata_sil24: always set protocol override for non-ATAPI data commands libata: Export AHCI capabilities libata: Delegate nonrot flag setting to SCSI [libata] Add pata_rdc driver for RDC ATA devices drivers/ata: Remove unnecessary semicolons libata: remove spindown skipping and warning ...
2009-09-11ahci: Add AMD SB900 SATA/IDE controller device IDsShane Huang
Add AMD SB900 SATA/IDE controller device IDs. Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-01ide: convert to ->proc_fopsAlexey Dobriyan
->read_proc, ->write_proc are going away, ->proc_fops should be used instead. The only tricky place is IDENTIFY handling: if for some reason taskfile_lib_get_identify() fails, buffer _is_ changed and at least first byte is overwritten. Emulate old behaviour with returning that first byte to userspace and reporting length=1 despite overall -E. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-27ACPICA: Major update for acpi_get_object_info external interfaceBob Moore
Completed a major update for the acpi_get_object_info external interface. Changes include: - Support for variable, unlimited length HID, UID, and CID strings - Support Processor objects the same as Devices (HID,UID,CID,ADR,STA, etc.) - Call the _SxW power methods on behalf of a device object - Determine if a device is a PCI root bridge - Change the ACPI_BUFFER parameter to ACPI_DEVICE_INFO. These changes will require an update to all callers of this interface. See the ACPICA Programmer Reference for details. Also, update all invocations of acpi_get_object_info interface Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-15at91_ide: remove headers specific for at91sam9263Sergey Matyukevich
This driver requires only static memory controller definitions and macroses contained in generic header at91sam9_smc.h. Those extra headers are misleading since this driver also works fine for at91sam9260 SoC: tests were performed on afeb9260 board. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15IDE: palm_bk3710: convert clock usage after clkdev conversionKevin Hilman
DaVinci core code has converted to the new clkdev API so clock name strings are not needed. Instead, just the a 'struct device' pointer is needed. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14pcmcia: add CNF-CDROM-ID for ideWolfram Sang
Fixes this report: http://article.gmane.org/gmane.linux.kernel.pcmcia.devel/2228/ Reported-by: John McGrath <john@john-mcgrath.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07ide: fix races in handling of user-space SET XFER commandsBartlomiej Zolnierkiewicz
* Make cmd->tf_flags field 'u16' and add IDE_TFLAG_SET_XFER taskfile flag. * Update ide_finish_cmd() to set xfer / re-read id if the new flag is set. * Convert set_xfer_rate() (write handler for /proc/ide/hd?/current_speed) and ide_cmd_ioctl() (HDIO_DRIVE_CMD ioctl handler) to use the new flag. * Remove no longer needed disable_irq_nosync() + enable_irq() from ide_config_drive_speed(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07ide: allow ide_dev_read_id() to be called from the IRQ contextBartlomiej Zolnierkiewicz
* Un-static __ide_wait_stat(). * Allow ide_dev_read_id() helper to be called from the IRQ context by adding irq_ctx flag and using mdelay()/__ide_wait_stat() when needed. * Switch ide_driveid_update() to set irq_ctx flag. This change is needed for the consecutive patch which fixes races in handling of user-space SET XFER commands but for improved bisectability and clarity it is better to do it in a separate patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07ide: ide-taskfile.c fix style problemsJaswinder Singh Rajput
Fix trivial style problems: WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> WARNING: space prohibited between function name and open parenthesis '(' WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable ERROR: do not use C99 // comments X 2 ERROR: trailing statements should be on next line ERROR: trailing whitespace ERROR: switch and case should be at the same indent WARNING: line over 80 characters total: 5 errors, 4 warnings Also removed dead code Also used pr_err() to avoid line breaks Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSESTJulia Lawall
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07ide-tape: fix handling of postponed rqsBorislav Petkov
ide-tape used to hit [ 58.614854] ide-tape: ht0: BUG: Two DSC requests queued! due to the fact that another rq was being issued while the driver was waiting for DSC to get set for the device executing ATAPI commands which set the DSC to 1 to indicate completion. Here's a sample output of that case: issue REZERO_UNIT [ 143.088505] ide-tape: ide_tape_issue_pc: retry #0, cmd: 0x01 [ 143.095122] ide: Enter ide_pc_intr - interrupt handler [ 143.096118] ide: Packet command completed, 0 bytes transferred [ 143.106319] ide-tape: ide_tape_callback: cmd: 0x1, dsc: 1, err: 0 [ 143.112601] ide-tape: idetape_postpone_request: cmd: 0x1, dsc_poll_freq: 2000 we stall the ide-tape queue here waiting for DSC [ 143.119936] ide-tape: ide_tape_read_position: enter [ 145.119019] ide-tape: idetape_do_request: sector: 4294967295, nr_sectors: 0 and issue the new READ_POSITION rq and hit the check. [ 145.126247] ide-tape: ht0: BUG: Two DSC requests queued! [ 145.131748] ide-tape: ide_tape_read_position: BOP - No [ 145.137059] ide-tape: ide_tape_read_position: EOP - No Also, ->postponed_rq used to point to that postponed request. To make things worse, in certain circumstances the rq it was pointing to got replaced unterneath it by swiftly reusing the same rq from the mempool of the block layer practically confusing stuff even more. However, we don't need to keep a pointer to that rq but simply wait for DSC to be set first before issuing the follow-up request in the drive's queue. In order to do that, we make idetape_do_request() first check the DSC and if not set, we stall the drive queue giving the other device on that IDE channel a chance. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07ide-tape: convert to ide_debug_log macroBorislav Petkov
Remove tape->debug_mask and use drive->debug_mask instead. There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07ide-tape: fix debug callMark de Wever
This error only occurs when IDETAPE_DEBUG_LOG is enabled. Signed-off-by: Mark de Wever <koraq@xs4all.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07ide: Fix annoying warning in ide_pio_bytes().David S. Miller
GCC can't see that flags is only set and used when PageHighmem() is true. Inspired by a patch from Jean Delvare. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07IDE: Save a call to PageHighMem()Jean Delvare
PageHighMem() isn't cheap so avoid calling it twice on the same page. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-21ide-tape: Don't leak kernel stack informationMichael Buesch
Don't leak kernel stack information through uninitialized structure members. Signed-off-by: Michael Buesch <mb@bu3sch.de> Acked-by: Borislav Petkov <petkovbb@gmail.com>. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-21ide: fix memory leak when flush command is issuedMaxime Bizon
I'm using ide on 2.6.30.1 with xfs filesystem. I noticed a kernel memory leak after writing lots of data, the kmalloc-96 slab cache keeps growing. It seems the struct ide_cmd kmalloced by idedisk_prepare_flush is never kfreed. Commit a09485df9cda49fbde2766c86eb18a9cae585162 ("ide: move request type specific code from ide_end_drive_cmd() to callers (v3)") and f505d49ffd25ed062e76ffd17568d3937fcd338c ("ide: fix barriers support") cause this regression, cmd->rq must now be set for ide_complete_cmd to honor the IDE_TFLAG_DYN flag. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06Revert "ide: improve handling of Power Management requests"David S. Miller
This reverts commit a1317f714af7aed60ddc182d0122477cbe36ee9b.
2009-06-29ide: memory overrun in ide_get_identity_ioctl() on big endian machines using ↵Christian Engelmayer
ioctl HDIO_OBSOLETE_IDENTITY This patch fixes a memory overrun in function ide_get_identity_ioctl() which chooses the size of a memory buffer depending on the ioctl command that led to the function call, however, passes that buffer to a function which needs the buffer size to be always chosen unconditionally. Due to conditional compilation the memory overrun can only happen on big endian machines. The error can be triggered using ioctl HDIO_OBSOLETE_IDENTITY. Usage of ioctl HDIO_GET_IDENTITY is safe. Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-29ide: fix resume for CONFIG_BLK_DEV_IDEACPI=yBartlomiej Zolnierkiewicz
commit 2f0d0fd2a605666d38e290c5c0d2907484352dc4 ("ide-acpi: cleanup do_drive_get_GTF()") didn't account for the lack of hwif->acpidata check in generic_ide_suspend() [ indirect user of do_drive_get_GTF() through ide_acpi_exec_tfs() ] resulting in broken resume when ACPI support is enabled but ACPI data is unavailable. Fix it by adding ide_port_acpi() helper for checking if port needs ACPI handling and cleaning generic_ide_{suspend,resume}() to use it instead of hiding hwif->acpidata and ide_noacpi checks in IDE ACPI helpers (this should help in preventing similar bugs in the future). While at it: - kill superfluous debugging printks in ide_acpi_{get,push}_timing() Reported-and-tested-by: Etienne Basset <etienne.basset@numericable.fr> Also-reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-26ide-cd: handle fragmented packet commands gracefullyBorislav Petkov
There are some devices in the wild that clear the DRQ bit during the last word of a packet command and therefore could use a "second chance" for that last word of data to be xferred instead of simply failing the request. Do that by attempting to suck in those last bytes in PIO mode. In addition, the ATA_ERR bit has to be cleared for we cannot be sure the data is valid otherwise. See http://bugzilla.kernel.org/show_bug.cgi?id=13399 for details. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25ide: always kill the whole request on errorBartlomiej Zolnierkiewicz
* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_kill_rq() and ide_floppy_do_request() for failed requests. [ bugfix part ] * Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_do_devset() and ide_complete_drive_reset(). Then remove ide_rq_bytes(). [ cleanup part ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25ide: fix ide_kill_rq() for special ide-{floppy,tape} driver requestsBartlomiej Zolnierkiewicz
Such requests should be failed with -EIO (like all other requests in this function) instead of being completed successfully. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24ide cs5520: Initialize second port's interrupt number.David S. Miller
In 86ccf37c6acd74cf7e4b7751ee045de19943c5a0 the driver was modified to deal with the removal of the pciirq argument to ide_pci_setup_ports(). But in the conversion only the first port's IRQ gets setup. Inspired by a patch by Bartlomiej Zolnierkiewicz., and with help from Alan Cox. Signed-off-by: David S. Miller <davem@davemloft.net>