summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2012-10-23Merge branches 'cxgb4' and 'mlx4' into for-nextRoland Dreier
2012-10-22RDMA/cxgb4: Don't free chunk that we have failed to allocateThadeu Lima de Souza Cascardo
In the error path of registering memory when there's a failure to allocate a chunk from the memory pool, we try to free the same chunk we just failed to allocate, which will BUG(). Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-18IB/mlx4: Synchronize cleanup of MCGs in MCG paravirtualizationEli Cohen
A client re-register event invokes cleanup of all MCGs. This is required to protect against misbehaved guests leading to corruption of join/leave database. However, since cleaning up the MCGs is a heavy operation, it is pushed to a work queue for further processing. Client re-register is also propagated to ULPs (e.g IPoIB). However, since the cleanup is performed in a workqueue, the ULP could leave and re-join groups before the cleanup occurs. In this case, when the cleanup takes place, it prunes the (newly-joined) MCGs and the ULP is left without actual MCGs while believing it joined them. Fix this by setting the flushing flag before invoking the cleanup task and clearing it after flushing is complete. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-18IB/mlx4: Fix QP1 P_Key processing in the Primary Physical Function (PPF)Jack Morgenstein
In the MAD paravirtualization code, one of the checks performed when forwarding QP1 (GSI) packets from wire to slave was a P_Key check: the P_Key received in the MAD must be present in the guest's paravirtualized P_Key table, and at least one of the (packet P_Key, guest P_Key) must be a full-membership P_Key. However, if everyone involved has only limited membership in the default P_Key, then packets sent by full-member remote hosts arrive at the PPF but are not passed on to the VFs with the current P_Key1 check. Fix this as follows: 1. Don't care if P_Key received over wire is full or not. If it successfully passed HW checks on the real QP1, then simply pass it to guest regardless of whether the guest has full or limited membership in its P_Key table. 2. If the guest (including paravirtualized master) has both full and limited P_Key forms in its table, preferentially pass the paravirtualized P_Key index of the full P_Key form in the tunnel header. 3. In the multicast join flow (mlx4/mcg.c), use the index for the default P_Key (wherever it is located) in replies generated from within the mcg module (previously, P_Key index 0 was used in all cases). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-18IB/mlx4: Fix build error on platforms where UL is not 64 bitsDoug Ledford
Line 110 uses UL as a compiler cast for the 0x constant, but it's not large enough to hold a 64-bit value on a 32-bit arch. Signed-off-by: Doug Ledford <dledford@redhat.com> [ Use "-1" instead of "FFFFFFFFFFFFFFFFULL". - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-10Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull scsi target updates from Nicholas Bellinger: "Things have been calm for the most part with no new fabric drivers in flight for v3.7 (we're up to eight now !), so this update is primarily focused on addressing a few long-standing items within target-core and iscsi-target fabric code. The highlights include: - target: Simplify fabric sense data length handling (roland) - qla2xxx: Fix endianness of task management response code (roland) - target: fix truncation of mode data, support zero allocation length (paolo) - target: Properly support zero-length commands in normal processing path (paolo) - iscsi-target: Correctly set 0xffffffff field within ISCSI_OP_REJECT PDU (ronnie + nab) - iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode (ronnie + nab) - target/file: Re-enable optional fd_buffered_io=1 operation (nab + hch) - iscsi-target: Add MaxXmitDataSegmenthLength forr target -> initiator MDRSL declaration (nab) - target: Add target_submit_cmd_map_sgls for SGL fabric memory passthrough (nab + hch) - tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls (hch + nab) - tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls (nab + hch) The last series for adding a new target_submit_cmd_map_sgls() fabric caller (as requested by hch) that accepts pre-allocated SGL memory (using existing logic), along with converting tcm_loop + tcm_vhost has only been in -next for the last days, but has gotten enough review +testing and is clear enough a mechanical change that I think it's reasonable to merge for -rc1 code. Thanks again to everyone who contributed this round! Extra special thanks to Roland (PureStorage) for tracking down the qla2xxx target TMR response code endian issue, and to Paolo (Redhat) for resolving the long standing zero-length CDB issues within target-core between virtual and pSCSI backends." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits) iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout values iscsit: proper endianess conversions iscsit: use the itt_t abstract type iscsit: add missing endianess conversion in iscsit_check_inaddr_any iscsit: remove incorrect unlock in iscsit_build_sendtargets_resp iscsit: mark various functions static target/iscsi: precedence bug in iscsit_set_dataout_sequence_values() target/usb-gadget: strlen() doesn't count the terminator target/usb-gadget: remove duplicate initialization tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls target: Add control CDB READ payload zero work-around tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls target: Add target_submit_cmd_map_sgls for SGL fabric memory passthrough iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode iscsi-target: Change iscsi_target_seq_pdu_list.c to honor MaxXmitDataSegmentLength iscsi-target: Add MaxXmitDataSegmentLength connection recovery check iscsi-target: Convert incoming PDU payload checks to MaxXmitDataSegmentLength iscsi-target: Enable MaxXmitDataSegmentLength operation in login path iscsi-target: Add base MaxXmitDataSegmentLength code target/file: Re-enable optional fd_buffered_io=1 operation ...
2012-10-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller
Pulled mainline in order to get the UAPI infrastructure already merged before I pull in David Howells's UAPI trees for networking. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-09mm: kill vma flag VM_RESERVED and mm->reserved_vm counterKonstantin Khlebnikov
A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA, currently it lost original meaning but still has some effects: | effect | alternative flags -+------------------------+--------------------------------------------- 1| account as reserved_vm | VM_IO 2| skip in core dump | VM_IO, VM_DONTDUMP 3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP 4| do not mlock | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP This patch removes reserved_vm counter from mm_struct. Seems like nobody cares about it, it does not exported into userspace directly, it only reduces total_vm showed in proc. Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP. remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP. remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP. [akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-07Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband changes from Roland Dreier: "Second batch of changes for the 3.7 merge window: - Late-breaking fix for IPoIB on mlx4 SR-IOV VFs. - Fix for IPoIB build breakage with CONFIG_INFINIBAND_IPOIB_CM=n (new netlink config changes are to blame). - Make sure retry count values are in range in RDMA CM. - A few nes hardware driver fixes and cleanups. - Have iSER initiator use >1 interrupt vectors if available." * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cma: Check that retry count values are in range IB/iser: Add more RX CQs to scale out processing of SCSI responses RDMA/nes: Bump the version number of nes driver RDMA/nes: Remove unused module parameter "send_first" RDMA/nes: Remove unnecessary if-else statement RDMA/nes: Add missing break to switch. mlx4_core: Adjust flow steering attach wrapper so that IB works on SR-IOV VFs IPoIB: Fix build with CONFIG_INFINIBAND_IPOIB_CM=n
2012-10-07infiniband: pass rdma_cm module to netlink_dump_startGao feng
set netlink_dump_control.module to avoid panic. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-06Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "Some highlights in addition to the usual batch of fixes: - 64TB address space support for 64-bit processes by Aneesh Kumar - Gavin Shan did a major cleanup & re-organization of our EEH support code (IBM fancy PCI error handling & recovery infrastructure) which paves the way for supporting different platform backends, along with some rework of the PCIe code for the PowerNV platform in order to remove home made resource allocations and instead use the generic code (which is possible after some small improvements to it done by Gavin). - Uprobes support by Ananth N Mavinakayanahalli - A pile of embedded updates from Freescale folks, including new SoC and board supports, more KVM stuff including preparing for 64-bit BookE KVM support, ePAPR 1.1 updates, etc..." Fixup trivial conflicts in drivers/scsi/ipr.c * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc/iommu: Fix multiple issues with IOMMU pools code powerpc: Fix VMX fix for memcpy case driver/mtd:IFC NAND:Initialise internal SRAM before any write powerpc/fsl-pci: use 'Header Type' to identify PCIE mode powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get powerpc: Remove tlb batching hack for nighthawk powerpc: Set paca->data_offset = 0 for boot cpu powerpc/perf: Sample only if SIAR-Valid bit is set in P7+ powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled powerpc/mpc85xx: Update interrupt handling for IFC controller powerpc/85xx: Enable USB support in p1023rds_defconfig powerpc/smp: Do not disable IPI interrupts during suspend powerpc/eeh: Fix crash on converting OF node to edev powerpc/eeh: Lock module while handling EEH event powerpc/kprobe: Don't emulate store when kprobe stwu r1 powerpc/kprobe: Complete kprobe and migrate exception frame powerpc/kprobe: Introduce a new thread flag powerpc: Remove unused __get_user64() and __put_user64() powerpc/eeh: Global mutex to protect PE tree powerpc/eeh: Remove EEH PE for normal PCI hotplug ...
2012-10-06idr: rename MAX_LEVEL to MAX_IDR_LEVELFengguang Wu
To avoid name conflicts: drivers/video/riva/fbdev.c:281:9: sparse: preprocessor token MAX_LEVEL redefined While at it, also make the other names more consistent and add parentheses. [akpm@linux-foundation.org: repair fallout] [sfr@canb.auug.org.au: IB/mlx4: fix for MAX_ID_MASK to MAX_IDR_MASK name change] Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at> Cc: walter harms <wharms@bfs.de> Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-04Merge branches 'cma', 'ipoib', 'iser', 'mlx4' and 'nes' into for-nextRoland Dreier
2012-10-04RDMA/cma: Check that retry count values are in rangeSean Hefty
The retry_count and rnr_retry_count connection parameters are both 3-bit values. Check that the values are in range and reduce if they're not. This fixes a problem reported by Doug Ledford <dledford@redhat.com> that resulted in the userspace rping test (part of the librdmacm samples) failing to run over Intel IB HCAs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> [ Use min_t() to avoid warnings about type mismatch. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-03IB/iser: Add more RX CQs to scale out processing of SCSI responsesAlex Tabachnik
RX/TX CQs will now be selected from a per HCA pool. For the RX flow this has the effect of using different interrupt vectors when using low level drivers (such as mlx4) that map the "vector" param provided by the ULP on CQ creation to a dedicated IRQ/MSI-X vector. This allows the RX flow processing of IO responses to be distributed across multiple CPUs. QPs (--> iSER sessions) are assigned to CQs in round robin order using the CQ with the minimum number of sessions attached to it. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Alex Tabachnik <alext@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-03RDMA/nes: Bump the version number of nes driverTatyana Nikolova
Bumpthe version of the nes driver to reflect recent fixes. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-03RDMA/nes: Remove unused module parameter "send_first"Tatyana Nikolova
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-03RDMA/nes: Remove unnecessary if-else statementTatyana Nikolova
Remove unnecessary if-else statement -- we do the same thing either way. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-03RDMA/nes: Add missing break to switch.Tatyana Nikolova
Static code analyzer cppcheck points out a missing break. Reported-by: David Binderman <dcb314@hotmail.com> Addresses: <https://bugzilla.kernel.org/show_bug.cgi?id=47671> Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-02IPoIB: Fix build with CONFIG_INFINIBAND_IPOIB_CM=nRoland Dreier
With the new netlink support in commit 862096a8bbf8 ("IB/ipoib: Add more rtnl_link_ops callbacks") we need ipoib_set_mode() to be available even if connected mode isn't built. Move the function from ipoib_cm.c to ipoib_main.c (and make a few CM-related macros available unconditonally). This fixes the build error drivers/built-in.o: In function 'ipoib_changelink': ipoib_netlink.c:(.text+0x6a5fc9): undefined reference to 'ipoib_set_mode' ipoib_netlink.c:(.text+0x6a5fe3): undefined reference to 'ipoib_set_mode' when CONFIG_INFINIBAND_IPOIB_CM isn't set. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Reported-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs update from Al Viro: - big one - consolidation of descriptor-related logics; almost all of that is moved to fs/file.c (BTW, I'm seriously tempted to rename the result to fd.c. As it is, we have a situation when file_table.c is about handling of struct file and file.c is about handling of descriptor tables; the reasons are historical - file_table.c used to be about a static array of struct file we used to have way back). A lot of stray ends got cleaned up and converted to saner primitives, disgusting mess in android/binder.c is still disgusting, but at least doesn't poke so much in descriptor table guts anymore. A bunch of relatively minor races got fixed in process, plus an ext4 struct file leak. - related thing - fget_light() partially unuglified; see fdget() in there (and yes, it generates the code as good as we used to have). - also related - bits of Cyrill's procfs stuff that got entangled into that work; _not_ all of it, just the initial move to fs/proc/fd.c and switch of fdinfo to seq_file. - Alex's fs/coredump.c spiltoff - the same story, had been easier to take that commit than mess with conflicts. The rest is a separate pile, this was just a mechanical code movement. - a few misc patches all over the place. Not all for this cycle, there'll be more (and quite a few currently sit in akpm's tree)." Fix up trivial conflicts in the android binder driver, and some fairly simple conflicts due to two different changes to the sock_alloc_file() interface ("take descriptor handling from sock_alloc_file() to callers" vs "net: Providing protocol type via system.sockprotoname xattr of /proc/PID/fd entries" adding a dentry name to the socket) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (72 commits) MAX_LFS_FILESIZE should be a loff_t compat: fs: Generic compat_sys_sendfile implementation fs: push rcu_barrier() from deactivate_locked_super() to filesystems btrfs: reada_extent doesn't need kref for refcount coredump: move core dump functionality into its own file coredump: prevent double-free on an error path in core dumper usb/gadget: fix misannotations fcntl: fix misannotations ceph: don't abuse d_delete() on failure exits hypfs: ->d_parent is never NULL or negative vfs: delete surplus inode NULL check switch simple cases of fget_light to fdget new helpers: fdget()/fdput() switch o2hb_region_dev_write() to fget_light() proc_map_files_readdir(): don't bother with grabbing files make get_file() return its argument vhost_set_vring(): turn pollstart/pollstop into bool switch prctl_set_mm_exe_file() to fget_light() switch xfs_find_handle() to fget_light() switch xfs_swapext() to fget_light() ...
2012-10-02Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "First batch of InfiniBand/RDMA changes for the 3.7 merge window: - mlx4 IB support for SR-IOV - A couple of SRP initiator fixes - Batch of nes hardware driver fixes - Fix for long-standing use-after-free crash in IPoIB - Other miscellaneous fixes" This merge also removes a new use of __cancel_delayed_work(), and replaces it with the regular cancel_delayed_work() that is now irq-safe thanks to the workqueue updates. That said, I suspect the sequence in question should probably use "mod_delayed_work()". I just did the minimal "don't use deprecated functions" fixup, though. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (45 commits) IB/qib: Fix local access validation for user MRs mlx4_core: Disable SENSE_PORT for multifunction devices mlx4_core: Clean up enabling of SENSE_PORT for older (ConnectX-1/-2) HCAs mlx4_core: Stash PCI ID driver_data in mlx4_priv structure IB/srp: Avoid having aborted requests hang IB/srp: Fix use-after-free in srp_reset_req() IB/qib: Add a qib driver version RDMA/nes: Fix compilation error when nes_debug is enabled RDMA/nes: Print hardware resource type RDMA/nes: Fix for crash when TX checksum offload is off RDMA/nes: Cosmetic changes RDMA/nes: Fix for incorrect MSS when TSO is on RDMA/nes: Fix incorrect resolving of the loopback MAC address mlx4_core: Fix crash on uninitialized priv->cmd.slave_sem mlx4_core: Trivial cleanups to driver log messages mlx4_core: Trivial readability fix: "0X30" -> "0x30" IB/mlx4: Create paravirt contexts for VFs when master IB driver initializes mlx4: Modify proxy/tunnel QP mechanism so that guests do no calculations mlx4: Paravirtualize Node Guids for slaves mlx4: Activate SR-IOV mode for IB ...
2012-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: 1) GRE now works over ipv6, from Dmitry Kozlov. 2) Make SCTP more network namespace aware, from Eric Biederman. 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko. 4) Make openvswitch network namespace aware, from Pravin B Shelar. 5) IPV6 NAT implementation, from Patrick McHardy. 6) Server side support for TCP Fast Open, from Jerry Chu and others. 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel Borkmann. 8) Increate the loopback default MTU to 64K, from Eric Dumazet. 9) Use a per-task rather than per-socket page fragment allocator for outgoing networking traffic. This benefits processes that have very many mostly idle sockets, which is quite common. From Eric Dumazet. 10) Use up to 32K for page fragment allocations, with fallbacks to smaller sizes when higher order page allocations fail. Benefits are a) less segments for driver to process b) less calls to page allocator c) less waste of space. From Eric Dumazet. 11) Allow GRO to be used on GRE tunnels, from Eric Dumazet. 12) VXLAN device driver, one way to handle VLAN issues such as the limitation of 4096 VLAN IDs yet still have some level of isolation. From Stephen Hemminger. 13) As usual there is a large boatload of driver changes, with the scale perhaps tilted towards the wireless side this time around. Fix up various fairly trivial conflicts, mostly caused by the user namespace changes. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits) hyperv: Add buffer for extended info after the RNDIS response message. hyperv: Report actual status in receive completion packet hyperv: Remove extra allocated space for recv_pkt_list elements hyperv: Fix page buffer handling in rndis_filter_send_request() hyperv: Fix the missing return value in rndis_filter_set_packet_filter() hyperv: Fix the max_xfer_size in RNDIS initialization vxlan: put UDP socket in correct namespace vxlan: Depend on CONFIG_INET sfc: Fix the reported priorities of different filter types sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP sfc: Fix loopback self-test with separate_tx_channels=1 sfc: Fix MCDI structure field lookup sfc: Add parentheses around use of bitfield macro arguments sfc: Fix null function pointer in efx_sriov_channel_type vxlan: virtual extensible lan igmp: export symbol ip_mc_leave_group netlink: add attributes to fdb interface tg3: unconditionally select HWMON support when tg3 is enabled. Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT" gre: fix sparse warning ...
2012-10-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace changes from Eric Biederman: "This is a mostly modest set of changes to enable basic user namespace support. This allows the code to code to compile with user namespaces enabled and removes the assumption there is only the initial user namespace. Everything is converted except for the most complex of the filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs, nfs, ocfs2 and xfs as those patches need a bit more review. The strategy is to push kuid_t and kgid_t values are far down into subsystems and filesystems as reasonable. Leaving the make_kuid and from_kuid operations to happen at the edge of userspace, as the values come off the disk, and as the values come in from the network. Letting compile type incompatible compile errors (present when user namespaces are enabled) guide me to find the issues. The most tricky areas have been the places where we had an implicit union of uid and gid values and were storing them in an unsigned int. Those places were converted into explicit unions. I made certain to handle those places with simple trivial patches. Out of that work I discovered we have generic interfaces for storing quota by projid. I had never heard of the project identifiers before. Adding full user namespace support for project identifiers accounts for most of the code size growth in my git tree. Ultimately there will be work to relax privlige checks from "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing root in a user names to do those things that today we only forbid to non-root users because it will confuse suid root applications. While I was pushing kuid_t and kgid_t changes deep into the audit code I made a few other cleanups. I capitalized on the fact we process netlink messages in the context of the message sender. I removed usage of NETLINK_CRED, and started directly using current->tty. Some of these patches have also made it into maintainer trees, with no problems from identical code from different trees showing up in linux-next. After reading through all of this code I feel like I might be able to win a game of kernel trivial pursuit." Fix up some fairly trivial conflicts in netfilter uid/git logging code. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits) userns: Convert the ufs filesystem to use kuid/kgid where appropriate userns: Convert the udf filesystem to use kuid/kgid where appropriate userns: Convert ubifs to use kuid/kgid userns: Convert squashfs to use kuid/kgid where appropriate userns: Convert reiserfs to use kuid and kgid where appropriate userns: Convert jfs to use kuid/kgid where appropriate userns: Convert jffs2 to use kuid and kgid where appropriate userns: Convert hpfs to use kuid and kgid where appropriate userns: Convert btrfs to use kuid/kgid where appropriate userns: Convert bfs to use kuid/kgid where appropriate userns: Convert affs to use kuid/kgid wherwe appropriate userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids userns: On ia64 deal with current_uid and current_gid being kuid and kgid userns: On ppc convert current_uid from a kuid before printing. userns: Convert s390 getting uid and gid system calls to use kuid and kgid userns: Convert s390 hypfs to use kuid and kgid where appropriate userns: Convert binder ipc to use kuids userns: Teach security_path_chown to take kuids and kgids userns: Add user namespace support to IMA userns: Convert EVM to deal with kuids and kgids in it's hmac computation ...
2012-10-02Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue changes from Tejun Heo: "This is workqueue updates for v3.7-rc1. A lot of activities this round including considerable API and behavior cleanups. * delayed_work combines a timer and a work item. The handling of the timer part has always been a bit clunky leading to confusing cancelation API with weird corner-case behaviors. delayed_work is updated to use new IRQ safe timer and cancelation now works as expected. * Another deficiency of delayed_work was lack of the counterpart of mod_timer() which led to cancel+queue combinations or open-coded timer+work usages. mod_delayed_work[_on]() are added. These two delayed_work changes make delayed_work provide interface and behave like timer which is executed with process context. * A work item could be executed concurrently on multiple CPUs, which is rather unintuitive and made flush_work() behavior confusing and half-broken under certain circumstances. This problem doesn't exist for non-reentrant workqueues. While non-reentrancy check isn't free, the overhead is incurred only when a work item bounces across different CPUs and even in simulated pathological scenario the overhead isn't too high. All workqueues are made non-reentrant. This removes the distinction between flush_[delayed_]work() and flush_[delayed_]_work_sync(). The former is now as strong as the latter and the specified work item is guaranteed to have finished execution of any previous queueing on return. * In addition to the various bug fixes, Lai redid and simplified CPU hotplug handling significantly. * Joonsoo introduced system_highpri_wq and used it during CPU hotplug. There are two merge commits - one to pull in IRQ safe timer from tip/timers/core and the other to pull in CPU hotplug fixes from wq/for-3.6-fixes as Lai's hotplug restructuring depended on them." Fixed a number of trivial conflicts, but the more interesting conflicts were silent ones where the deprecated interfaces had been used by new code in the merge window, and thus didn't cause any real data conflicts. Tejun pointed out a few of them, I fixed a couple more. * 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits) workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending() workqueue: use cwq_set_max_active() helper for workqueue_set_max_active() workqueue: introduce cwq_set_max_active() helper for thaw_workqueues() workqueue: remove @delayed from cwq_dec_nr_in_flight() workqueue: fix possible stall on try_to_grab_pending() of a delayed work item workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback() workqueue: use __cpuinit instead of __devinit for cpu callbacks workqueue: rename manager_mutex to assoc_mutex workqueue: WORKER_REBIND is no longer necessary for idle rebinding workqueue: WORKER_REBIND is no longer necessary for busy rebinding workqueue: reimplement idle worker rebinding workqueue: deprecate __cancel_delayed_work() workqueue: reimplement cancel_delayed_work() using try_to_grab_pending() workqueue: use mod_delayed_work() instead of __cancel + queue workqueue: use irqsafe timer for delayed_work workqueue: clean up delayed_work initializers and add missing one workqueue: make deferrable delayed_work initializer names consistent workqueue: cosmetic whitespace updates for macro definitions workqueue: deprecate system_nrt[_freezable]_wq workqueue: deprecate flush[_delayed]_work_sync() ...
2012-10-02Merge branches 'cma', 'cxgb4', 'ipoib', 'mlx4', 'mlx4-sriov', 'nes', 'qib' ↵Roland Dreier
and 'srp' into for-linus
2012-10-01IB/ipoib: Add more rtnl_link_ops callbacksOr Gerlitz
Add the rtnl_link_ops changelink and fill_info callbacks, through which the admin can now set/get the driver mode, etc policies. Maintain the proprietary sysfs entries only for legacy childs. For child devices, set dev->iflink to point to the parent device ifindex, such that user space tools can now correctly show the uplink relation as done for vlan, macvlan, etc devices. Pointed out by Patrick McHardy <kaber@trash.net> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01Merge tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi) - Clear host bridge resource info to avoid issue when releasing (Yinghai Lu) - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu) - Use standard list ops for acpi_pci_drivers (Jiang Liu) Device hotplug - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang Liu) - Remove fakephp driver (Bjorn Helgaas) - Fix VGA ref count in hotplug remove path (Yinghai Lu) - Allow acpiphp to handle PCIe ports without native hotplug (Jiang Liu) - Implement resume regardless of pciehp_force param (Oliver Neukum) - Make pci_fixup_irqs() work after init (Thierry Reding) Miscellaneous - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang) - Factor out PCI Express Capability accessors (Jiang Liu) - Add pcibios_window_alignment() so powerpc EEH can use generic resource assignment (Gavin Shan) - Make pci_error_handlers const (Stephen Hemminger) - Cleanup drivers/pci/remove.c (Bjorn Helgaas) - Improve Vendor-Specific Extended Capability support (Bjorn Helgaas) - Use standard list ops for bus->devices (Bjorn Helgaas) - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang) - Reassign invalid bus number ranges (Intel DP43BF workaround) (Yinghai Lu)" * tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits) PCI: acpiphp: Handle PCIe ports without native hotplug capability PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots PCI/ACPI: Protect acpi_pci_roots list with mutex PCI/ACPI: Use acpi_pci_root info rather than looking it up again PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface PCI/ACPI: Protect acpi_pci_drivers list with mutex PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges PCI/ACPI: Use normal list for struct acpi_pci_driver PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots PCI: Fix default vga ref_count ia64/PCI: Clear host bridge aperture struct resource x86/PCI: Clear host bridge aperture struct resource PCI: Stop all children first, before removing all children Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()" PCI: Provide a default pcibios_update_irq() PCI: Discard __init annotations for pci_fixup_irqs() and related functions PCI: Use correct type when freeing bus resource list PCI: Check P2P bridge for invalid secondary/subordinate range PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot() ...
2012-10-01IB/qib: Fix local access validation for user MRsMike Marciniszyn
Commit 8aac4cc3a9d7 ("IB/qib: RCU locking for MR validation") introduced a bug that broke user post sends. The proper validation of the MR was lost in the patch. This patch corrects that validation. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30IB/srp: Avoid having aborted requests hangBart Van Assche
We need to call scsi_done() for commands after we abort them. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30IB/srp: Fix use-after-free in srp_reset_req()Bart Van Assche
srp_free_req() uses the scsi_cmnd structure contents to unmap buffers, so we must invoke srp_free_req() before we release ownership of that structure. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30IB/qib: Add a qib driver versionDean Luick
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30RDMA/nes: Fix compilation error when nes_debug is enabledTatyana Nikolova
Removing old variables caused a compile error from nes_debug(). Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30RDMA/nes: Print hardware resource typeTatyana Nikolova
Hardware resource types are added and when a resource isn't available, its type is printed. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30RDMA/nes: Fix for crash when TX checksum offload is offTatyana Nikolova
When TX checksum offload is disabled for an iWarp connection, skb->ip_summed needs to be set to CHECKSUM_NONE. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30RDMA/nes: Cosmetic changesTatyana Nikolova
- Remove unnecessary statement "if (1)" - Refactor a statement (wqe_misc |= NES_NIC_SQ_WQE_COMPLETION) out of if/else statement, because it is independant of the flow. - Define netdev->features in one line for clarity. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30RDMA/nes: Fix for incorrect MSS when TSO is onTatyana Nikolova
In TSO handling code, skb_shared_info() is used to get the MSS instead of the bool function skb_is_gso() (which always returns 1). Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30RDMA/nes: Fix incorrect resolving of the loopback MAC addressTatyana Nikolova
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30IB/mlx4: Create paravirt contexts for VFs when master IB driver initializesJack Morgenstein
When we have VFs and PFs on same host, the VFs are activated within the mlx4_core module before the mlx4_ib kernel module is loaded. When the mlx4_ib module initializes the PF (master), it now creates MAD paravirtualization contexts for any VFs that already active. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30mlx4: Modify proxy/tunnel QP mechanism so that guests do no calculationsJack Morgenstein
Previously, the structure of a guest's proxy QPs followed the structure of the PPF special qps (qp0 port 1, qp0 port 2, qp1 port 1, qp1 port 2, ...). The guest then did offset calculations on the sqp_base qp number that the PPF passed to it in QUERY_FUNC_CAP(). This is now changed so that the guest does no offset calculations regarding proxy or tunnel QPs to use. This change frees the PPF from needing to adhere to a specific order in allocating proxy and tunnel QPs. Now QUERY_FUNC_CAP provides each port individually with its proxy qp0, proxy qp1, tunnel qp0, and tunnel qp1 QP numbers, and these are used directly where required (with no offset calculations). To accomplish this change, several fields were added to the phys_caps structure for use by the PPF and by non-SR-IOV mode: base_sqpn -- in non-sriov mode, this was formerly sqp_start. base_proxy_sqpn -- the first physical proxy qp number -- used by PPF base_tunnel_sqpn -- the first physical tunnel qp number -- used by PPF. The current code in the PPF still adheres to the previous layout of sqps, proxy-sqps and tunnel-sqps. However, the PPF can change this layout without affecting VF or (paravirtualized) PF code. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30mlx4: Paravirtualize Node Guids for slavesJack Morgenstein
This is necessary in order to support > 1 VF/PF in a VM for software that uses the node guid as a discriminator, such as librdmacm. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30mlx4: Activate SR-IOV mode for IBJack Morgenstein
Remove the error returns for IB ports from mlx4_ib_add, mlx4_INIT_PORT_wrapper, and mlx4_CLOSE_PORT_wrapper. Currently, SRIOV is supported only for devices for which the link layer is IB on all ports; RoCE support will be added later. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30IB/mlx4: Miscellaneous adjustments for SR-IOV IB supportJack Morgenstein
1. Allow only master to change node description. 2. Prevent AH leakage in send mads. 3. Take device part number from PCI structure, so that guests see the VF part number (and not the PF part number). 4. Place the device revision ID into caps structure at startup. 5. SET_PORT in update_gids_task needs to go through wrapper on master. 6. In mlx4_ib_event(), PORT_MGMT_EVENT needs be handled in a work queue on the master, since it propagates events to slaves using GEN_EQE. 7. Do not support FMR on slaves. 8. Add spinlock to slave_event(), since it is called both in interrupt context and in process context (due to 6 above, and also if smp_snoop is used). This fix was found and implemented by Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30IB/mlx4: Add iov directory in sysfs under the ib deviceJack Morgenstein
This directory is added only for the master -- slaves do not have it. The sysfs iov directory is used to manage and examine the port P_Key and guid paravirtualization. Under iov/ports, the administrator may examine the gid and P_Key tables as they are present in the device (and as are seen in the "network view" presented to the SM). Under the iov/<pci slot number> directories, the admin may map the index numbers in the physical tables (as under iov/ports) to the paravirtualized index numbers that guests see. For example, if the administrator, for port 1 on guest 2 maps physical pkey index 10 to virtual index 1, then that guest, whenever it uses its pkey index 1, will actually be using the real pkey index 10. Based on patch from Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30IB/mlx4: Propagate P_Key and guid change port management events to slavesJack Morgenstein
P_Key change and guid change events are not of interest to all slaves, but only to those slaves which "see" the table slots whose contents have change. For example, if the guid at port 1, index 5 has changed in the PPF, we wish to propagate the gid-change event only to the function which has that guid index mapped to its port/guid table (in this case it is slave #5). Other functions should not get the event, since the event does not affect them. Similarly with P_Keys -- P_Key change events are forwarded only to slaves which have that P_Key index mapped to their virtual P_Key table. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30mlx4: Add alias_guid mechanismJack Morgenstein
For IB ports, we paravirtualize the GUID at index 0 on slaves. The GUID at index 0 seen by a slave is the actual GUID occupying the GUID table at the slave-id index. The driver, by default, requests at startup time that subnet manager populate its entire guid table with GUIDs. These guids are then mapped (paravirtualized) to the slaves, and appear for each slave as its GUID at index 0. Until each slave has such a guid, its port status is DOWN. The guid table is cached to support special QP paravirtualization, and event propagation to slaves on guid change (we test to see if the guid really changed before propagating an event to the slave). To support this caching, add capability to __mlx4_ib_query_gid() to obtain the network view (i.e., physical view) gid at index X, not just the host (paravirtualized) view. Based on a patch from Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30IB/mlx4: Add CM paravirtualizationAmir Vadai
In CM para-virtualization: 1. Incoming requests are steered to the correct vHCA according to the embedded GID. 2. Communication IDs on outgoing requests are replaced by a globally unique ID, generated by the PPF, since there is no synchronization of ID generation between guests (and so these IDs are not guaranteed to be globally unique). The guest's comm ID is stored, and is returned to the response MAD when it arrives. Signed-off-by: Amir Vadai <amirv@mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOVOren Duer
MCG paravirtualization support includes: - Creating multicast groups by VFs, and keeping accounting of them - Leaving multicast groups by VFs - Updating SM only with real changes in the overall picture of MCGs status - Creation of MGID=0 groups (let SM choose MGID) Note that the MCG module maintains its own internal MCG object reference counts. The reason for this is that the IB core is used to track only the multicast groups joins generated by the PF it runs over. The PF IB core layer is unaware of slaves, so it cannot be used to keep track of MCG joins they generate. Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30mlx4: MAD_IFC paravirtualizationJack Morgenstein
The MAD_IFC firmware command fulfills two functions. First, it is used in the QP0/QP1 MAD-handling flow to obtain information from the FW (for answering queries), and for setting variables in the HCA (MAD SET packets). For this, MAD_IFC should provide the FW (physical) view of the data. This is the view that OpenSM needs. We call this the "network view". In the second case, MAD_IFC is used by various verbs to obtain data regarding the local HCA (e.g., ib_query_device()). We call this the "host view". This data needs to be paravirtualized. MAD_IFC therefore needs a wrapper function, and also needs another flag indicating whether it should provide the network view (when it is called by ib_process_mad in special-qp packet handling), or the host view (when it is called while implementing a verb). There are currently 2 flag parameters in mlx4_MAD_IFC already: ignore_bkey and ignore_mkey. These two parameters are replaced by a single "mad_ifc_flags" parameter, with different bits set for each flag. A third flag is added: "network-view/host-view". Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30IB/mlx4: SR-IOV multiplex and demultiplex MADsJack Morgenstein
Special QPs are paravirtualized. vHCAs are not given direct access to QP0/1. Rather, these QPs are operated by a special context hosted by the PF, which mediates access to/from vHCAs. This is done by opening a "tunnel" per vHCA port per QP0/1. A tunnel comprises a pair of UD QPs: a "Tunnel QP" in the PF-context and a "Proxy QP" in the vHCA. All vHCA MAD traffic must pass through the corresponding tunnel. vHCA QPs cannot be assigned to VL15 and are denied of the well-known QKey. Outgoing messages are "de-multiplexed" (i.e., directed to the wire via the real special QP). Incoming messages are "multiplexed" (i.e. steered by the PPF to the correct VF or to the PF) QP0 access is restricted to the PF vHCA. VF vHCAs also have (virtual) QP0s, but they never receive any SMPs and all SMPs sent are discarded. QP1 traffic is allowed for all vHCAs, but special care is required to bridge the gap between the host and network views. Specifically: - Transaction IDs are mapped to guarantee uniqueness among vHCAs - CM para-virtualization o Incoming requests are steered to the correct vHCA according to the embedded GID o Local communication IDs are mapped to ensure uniqueness among vHCAs (see the patch that adds CM paravirtualization.) - Multicast para-virtualization o The PF context aggregates membership state from all vHCAs o The SA is contacted only when the aggregate membership changes o If the aggregate does not change, the PF context will provide the requesting vHCA with the proper response. (see the patch that adds multicast group paravirtualization) Incoming MADs are steered according to: - the DGID If a GRH is present - the mapped transaction ID for response MADs - the embedded GID in CM requests - the remote communication ID in other CM messages Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>