summaryrefslogtreecommitdiff
path: root/drivers/message
AgeCommit message (Collapse)Author
2006-04-14[SCSI] mptfusion - fix panic in mptsas_slave_configureMoore, Eric
Driver panic when RAID logical volume was present when driver loaded, or when a RAID logical volume was created on the fly. This issue was created in due to recent scsi_transport_sas change, when sas_read_port_mode_page was added into the mptsas drivers slave_config entry point. This new API expects that all sdev's to be assocated to an rphy, however that is not the case for logical volumes, as they are created using scsi_add_device, instead of sas_rphy_add(). Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-28[PATCH] mark f_ops const in the inodeArjan van de Ven
Mark the f_ops members of inodes as const, as well as fix the ripple-through this causes by places that copy this f_ops and then "do stuff" with it. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] mempool: use mempool_create_slab_pool()Matthew Dobson
Modify well over a dozen mempool users to call mempool_create_slab_pool() rather than calling mempool_create() with extra arguments, saving about 30 lines of code and increasing readability. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] i2o_dump_hrt() output cleanupVasily Averin
This patch fixes i2o_dump_hrt output from dmesg: iop0: HRT has 1 entries of 16 bytes each. Adapter 00000012: <7>TID 0000:[<7>H<7>P<7>C<7>*<7>]:<7>PCI 1: Bus 1 Device 22 Function 0<7> Signed-off-by: Vasily Averin <vvs@sw.ru> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-19[SCSI] convert mptsas over to end_device/expander allocationsJames Bottomley
The conversion of mptsas should allow the elimination of the contained flag in the sas transport class. Acked-by: "Moore, Eric" <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14[SCSI] fusion - bump versionMoore, Eric
version bump Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14[SCSI] fusion - expander hotplug suport in mptsas moduleMoore, Eric
This adds support for hot adding and removing expanders, and its associated attached devices. When there is a change in topology, the fusion firmware sends the MPI_EVENT_SAS_DISCOVERY event to the driver. The driver will read firmware config pages to determine what changes took place, and refresh drivers view of the world stored in ioc->sas_topology. Here is the details of the action the driver does: (1) Expander Added : The mptsas_discovery_work workqueue is called. Config pages read, and ioc->sas_topology is refreshed. The sas_phy_add() is called for each phy of the expander. The expanders attached devices are added via sas_rphy_add(). Added end devices are handled within the MPT_ADD_DEVICE logic in mptsas_hotplug_work workqueue. (2) Expander Delete : The sas_rphy_delete() will be called for the top most compenent of the parent that the expander is attached to. The sas_rphy_delete call will delete all the children phys, rphys, and end devices. This is handled from mptsas_discovery_work workqueue. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14[SCSI] fusion - exposing raid components in mptsasMoore, Eric
Suppport for exposing hidden raid components for sg interface. The sdev->no_uld_attach flag will set set accordingly. The sas module supports adding/removing raid volumes using online storage management application interface. This patch rely's on patch's provided to me by Christoph Hellwig, that exports device_reprobe. I will post those patch's on behalf of Christoph. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14[SCSI] fusion - memory leak, and initializing fieldsMoore, Eric
Changelog: (1) fix memory leak: p->phy_info (2) initialize device_info and port_info data fields (3) initialize the hba firmware handle (4) initialize phy_id for attached phy_info data fields (5) initialize attached phy_info data fields Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14[SCSI] fusion - exclosure misspelledMoore, Eric
exclosure should be enclosure Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14[SCSI] fusion - cleanup mptsas event handling functionsMoore, Eric
Cleanup of mptsas firmware event handlers. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14[SCSI] fusion - removing target_id/bus_id from the VirtDevice structureMoore, Eric
It makes no sense in keeping the target_id and bus_id in the VirtDevice structure, when it can be obtained from the VirtTarget structure. In addition, this patch fix's couple compilation bugs in mptfc.c when MPT_DEBUG_FC is enabled. This provided by Micheal Reed. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14[SCSI] fusion - static fix'sMoore, Eric
Patch previously provided from Adrian Bunk <bunk@stusta.de>, moving some functions to static. This is already in the -mm tree. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14[SCSI] fusion - move some debug firmware event debug msgs to verbose levelMoore, Eric
Created a debug level MPT_DEBUG_VERBOSE_EVENTS. Moving some of the more vebose debug messages for firwmare events into new debug level. Also added some more firmware events descriptions. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14[SCSI] fusion - loginfo header updateMoore, Eric
This header is provided to better understand loginfo codes returned by the mpt fusion firmware. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] mptscsih: remove unused page 1 setting functionJames Bottomley
It was actually rendered unused by the move to the spi transport class, but never taken out. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] i2o: fix memory leak in i2o_exec_lct_modifiedVasily Averin
i2o_exec_lct_modified() does not release memory allocated for work_struct. Signed-off-by: Vasily Averin <vvs@sw.ru> Although your patch is the same, i've rewritten it a little bit for naming consistency in the I2O driver. Acked-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] mptspi: Add transport class Domain ValidationJames Bottomley
This is the first half of a patch to add the generic domain validation to mptspi. It also creates a secondary "virtual" channel for raid component devices since these are now exported with no_uld_attach. What Eric and I would have really liked is to export all physical components on channel 0 and all raid components on channel 1. Unfortunately, this would result in device renumbering on platforms with mixed RAID/Physical devices which was considered unacceptable for userland stability reasons. Still to be done is to plug back the extra parameter setting and DV pieces on reset and hotplug. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] mptsas: add support for enclosure and bay identifier attributesChristoph Hellwig
Adds support to retrieve the enclosure and bay identifiers. This patch is from Eric with minor modifications from me, rewritten from a buggy patch of mine, based on the earlier CSMI implementation from Eric.. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] drivers/message/fusion/mptfc.c: make 2 functions staticAdrian Bunk
This patch makes two needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] fusion - mptlan - remove wierd humor printMoore, Eric
Removes wierd humor, and bad language printk in mptlan. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-16Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
2006-02-05[PATCH] Fix i2o_scsi oops on abortMarkus Lidel
Fix http://bugzilla.kernel.org/show_bug.cgi?id=5923 When a scsi command failed, an oops would result. Back-to-back SMART queries would make the Seagate drives unhappy. The second SMART query would timeout, and the command would be aborted. Acked-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Kenny Simpson <theonetruekenny@yahoo.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04[SCSI] fusion - mptctl -adding asyn event notification supportMoore, Eric
Adding aen support. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04[SCSI] fusion - mptctl -firmware download fixMoore, Eric
Fix's firmware download ioctl to work with SAS. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04[SCSI] fusion - mptctl - backplane istwi fixMoore, Eric
Moving the toolbox call from mptbase.c, over to mptctl.c, and using the mptctl infastructure to issue the call. The existing code is hanging on certain HP platforms when this ioctl is issued, and this patch fix's that. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04[SCSI] fusion - mptctl -sense width fixMoore, Eric
Bug fix for correctly setting sense width for the MPTCOMMAND ioctl. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04[SCSI] fusion - mptctl - Event Log FixMoore, Eric
Use the hard coded value MPTCTL_EVENT_LOG_SIZE to fix bug where in certain cases, the ioc->eventLogSize was initialized. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04[SCSI] fusion - mtctl - change to wait_event_timeoutMoore, Eric
Change from using wait_event_interruptible_timeout to wait_event_timeout. Also delete white space and duplicate line of code. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04[SCSI] fusion - mptctl - adding support for bus_type=SASMoore, Eric
Add bus_type recognization in ioctl path for SAS. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04[SCSI] fusion - mptctl - MPTCOMMAND - adding function types.Moore, Eric
This adds support for new function types in the existing MPTCOMMAND ioctl. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-03[PATCH] I2O: fix and workaround for Motorola/Freescale controllerMarkus Lidel
- This controller violates the I2O spec for the I/O registers. The patch contains a workaround which moves the registers to the proper location. (originally author: Matthew Starzewski) - If a message frame is beyond the mapped address range a error is returned. Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] I2O: don't disable PCI device if it is enabled before probingMarkus Lidel
If PCI device is enabled before probing, it will not be disabled at exit. Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-31[SCSI] fusion: add message sanity checkMoore, Eric
This adds a sanity check in the interrupt routine insures incoming message frames are a valid message frames. The code for setting 0xdeadbeaf in the freed message frames, apparently was already submitted by Christoph in previous patch submission. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: unloading the driver - only set asyn narrow for configured ↵Moore, Eric
devices This patch inhibits sending spi negotiation parameters for non-configured devices from the slave_destroy function. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: unloading the driver results in panic - fixMoore, Eric
The ioc->alt_ioc->alt_ioc pointer is not getting cleared during driver unload time. This dangling pointer can result in panic in certain circumstances, such as error recovery, or firmware download in flashless environments. This only impacts dual functions controllers, such as 1030. Please apply. This patch also includes a small cosmetic name change for mpt_spi_log_info. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] mptsas: don't complain on bogus slave_alloc callsChristoph Hellwig
When people use the userspace scanning facilities on SAS hardware the LLDD gets bogus slave_alloc calls. Just fail those gracefully instead of printing a warning in mptsas and another one in the midlayer. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: add task managment response code infoMoore, Eric
Adding verbose message returned from firmware when a task mangment request fails. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: add MSI supportChristoph Hellwig
On Mon, Jan 16, 2006 at 06:53:24PM -0700, Moore, Eric wrote: > Adding MSI support, and command line for enabling > it. By default, the command line option has MSI disabled. mpt_msi_enable is initialized to 0 implicitly, no need to do that. Also replace if (mpt_msi_enable == 1) tests with just if (mpt_msi_enable). Updated patch below: Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: overrun tape fixMoore, Eric
Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: add verbose messages for RAID actionsMoore, Eric
A customer request to send raid asyn actions from firmware to the event syslog. This shows when raid volumes go degraded, or complete resync, or volumes created/deleted, etc. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: increase reply frame size from 0x40 to 0x50 bytesMoore, Eric
Increasing the reply frame size by 16 bytes, to be in sync with the other fusion drivers. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: setting timeouts in eh threads appropiatley for fc/sas/spiChristoph Hellwig
On Mon, Jan 16, 2006 at 06:53:13PM -0700, Moore, Eric wrote: > The task managment request timeout in the eh threads was set > for U320 timing, which is between 2-5 seconds. > This is too small for FC and SAS. > According to the firmware engineers, Fibre needs to be 40 seconds > and SAS needs to be 10 seconds. The timeout selection should probably be done in a little helper instead of duplicated in a few places. Updated patch below. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: mptsas, increase discovery timout to 300 secondsMoore, Eric
Increase the port enable timeout only for SAS from 30 to 300 seconds. A customer request for the handling large topologies. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: spi bus reset when driver loadsMoore, Eric
This patch is for spi. This issues bus reset when driver loads. Handling cases when initator has negotiated for packetized, and target negotiated for non-packetized; effectly this bus reset is getting both target and initiator on the same sheet of music. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: fix compileJames Bottomley
The prior fusion patches moved an invocation of a function, mptscsih_TMHandler(), static to mptscsih.c into mptsas.c Make the function unstatic, move the header to mptscsih.h and export it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: bump versionMoore, Eric
Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: FC rport code fixesMichael Reed
This fix's problems with recent fc submission regarding i/o being redirected to the wrong target. Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: move sas persistent event handling over to the mptsas moduleMoore, Eric
This moves code intented for SAS from the generic mptscsih module over to the mptsas module. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: target reset when drive is being removedMoore, Eric
The issuing of the target reset used in device hot removal case so the firmware queue is flushed out off outstanding commands. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>