summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Merge tag 'mfd_3.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and TI's TPS65090 and TPS65217. - New variants support (8420, 8520 ab9540), cleanups and bug fixes for the abx500 and db8500 ST-E chipsets. - Some minor fixes and update for the wm8994 from Mark. - The beginning of a long term TWL cleanup effort coming from the TI folks. - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997 drivers. Fix up trivial conflicts due to duplicate patches and header file cleanups (<linux/device.h> removal etc). * tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits) gpio/twl: Add DT support to gpio-twl4030 driver gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support mfd: Detach twl6040 from the pmic mfd driver mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups mfd: Micro-optimization on twl4030 IRQ handler mfd: Make twl4030 SIH SPARSE_IRQ capable mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files mfd: Remove references already defineid in header file from twl-core mfd: Remove unneeded header from twl-core mfd: Make twl-core not depend on pdata->irq_base/end ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files mfd: Return twl6030_mmc_card_detect IRQ for board setup Revert "mfd: Add platform data for MAX8997 haptic driver" mfd: Add support for TPS65090 mfd: Add some da9052-i2c section annotations mfd: Build rtc5t583 only if I2C config is selected to y. mfd: Add anatop mfd driver mfd: Fix compilation error in tps65910.h mfd: Add 8420 variant to db8500-prcmu mfd: Add 8520 PRCMU variant to db8500-prcmu ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-27Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM platform updates from Russell King: "This covers platform stuff for platforms I have a direct interest in (iow, I have the hardware). Essentially: - as we no longer support any other Acorn platforms other than RiscPC anymore, we can collect all that code into mach-rpc. - convert Acorn expansion card stuff to use IRQ allocation functions, and get rid of NO_IRQ from there. - cleanups to the ebsa110 platform to move some private stuff out of its header files. - large amount of SA11x0 updates: - conversion of private DMA implementation to DMA engine support (this actually gives us greater flexibility in drivers over the old API.) - re-worked ucb1x00 updates - convert to genirq, remove sa11x0 dependencies, fix various minor issues - move platform specific sa11x0 framebuffer data into platform files in arch/arm instead of keeping this in the driver itself - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA for SIR transmissions as well as FIR - rework sa1111 support for genirq, and irq allocation - fix sa1111 IRQ support so it works again - use sparse IRQ support After this, I have one more pull request remaining from my current set, which I think is going to be the most problematical as it generates 8 conflicts." Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per Russell. * 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits) ARM: 7343/1: sa11x0: convert to sparse IRQ ARM: 7342/2: sa1100: prepare for sparse irq conversion ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h ARM: sa11x0: remove unused DMA controller definitions ARM: sa11x0: remove old SoC private DMA driver USB: sa1111: add hcd .reset method USB: sa1111: add OHCI shutdown methods USB: sa1111: reorganize ohci-sa1111.c USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__) USB: sa1111: sparse and checkpatch cleanups ARM: sa11x0: don't static map sa1111 ARM: sa1111: use dev_err() rather than printk() ARM: sa1111: cleanup sub-device registration and unregistration ARM: sa1111: only setup DMA for DMA capable devices ARM: sa1111: register sa1111 devices with dmabounce in bus notifier ARM: sa1111: move USB interface register definitions to ohci-sa1111.c ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c ARM: sa1111: delete unused physical GPIO register definitions ...
2012-03-25Merge branch 'sa11x0-mcp' into sa11x0Russell King
Conflicts: arch/arm/mach-sa1100/assabet.c arch/arm/mach-sa1100/collie.c arch/arm/mach-sa1100/generic.c arch/arm/mach-sa1100/lart.c arch/arm/mach-sa1100/shannon.c
2012-03-24Merge tag 'device-for-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull <linux/device.h> avoidance patches from Paul Gortmaker: "Nearly every subsystem has some kind of header with a proto like: void foo(struct device *dev); and yet there is no reason for most of these guys to care about the sub fields within the device struct. This allows us to significantly reduce the scope of headers including headers. For this instance, a reduction of about 40% is achieved by replacing the include with the simple fact that the device is some kind of a struct. Unlike the much larger module.h cleanup, this one is simply two commits. One to fix the implicit <linux/device.h> users, and then one to delete the device.h includes from the linux/include/ dir wherever possible." * tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: device.h: audit and cleanup users in main include dir device.h: cleanup users outside of linux/include (C files)
2012-03-22Merge tag 'regmap-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "Things are really quieting down with the regmap API, while we're still seeing a trickle of new features coming in they're getting much smaller than they were. It's also nice to have some features which support other subsystems building infrastructure on top of regmap. Highlights include: - Support for padding between the register and the value when interacting with the device, sometimes needed for fast interfaces. - Support for applying register updates to the device when restoring the register state. This is intended to be used to apply updates supplied by manufacturers for tuning the performance of the device (many of which are to undocumented registers which aren't otherwise covered). - Support for multi-register operations on cached registers. - Support for syncing only part of the register cache. - Stubs and parameter query functions intended to make it easier for other subsystems to build infrastructure on top of the regmap API. plus a few driver updates making use of the new features which it was easier to merge via this tree." * tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (41 commits) regmap: Fix future missing prototype of devres_alloc() and friends regmap: Rejig struct declarations for stubbed API regmap: Fix rbtree block base in sync regcache: Make sure we sync register 0 in an rbtree cache regmap: delete unused module.h from drivers/base/regmap files regmap: Add stub for regcache_sync_region() mfd: Improve performance of later WM1811 revisions regmap: Fix x86_64 breakage regmap: Allow drivers to sync only part of the register cache regmap: Supply ranges to the sync operations regmap: Add tracepoints for cache only and cache bypass regmap: Mark the cache as clean after a successful sync regmap: Remove default cache sync implementation regmap: Skip hardware defaults for LZO caches regmap: Expose the driver name in debugfs mfd: wm8400: Convert to devm_regmap_init_i2c() mfd: wm831x: Convert to devm_regmap_init() mfd: wm8994: Convert to devm_regmap_init() mfd/ASoC: Convert WM8994 driver to use regmap patches mfd: Add __devinit and __devexit annotations in wm8994 ...
2012-03-22mfd: Detach twl6040 from the pmic mfd driverPeter Ujfalusi
On OMAP4 platform audio has separate IC, it is no longer part of the pmic chip. Prevent twl-core to claim the 0x4b address, which belongs to the twl6040 audio IC. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanupsBenoit Cousson
Since a structure device is available now, use the dev_ macros instead of the pr_ ones. Clean some badly formatted comments. Remove some unused variables. Move some variable to the place they belong. Clean some badly wrapped lines. Align variable definition Add missing braces in if-then-else block. Add blank line for better readability. Move stuff here and there... Conflicts: drivers/mfd/twl-core.c Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Micro-optimization on twl4030 IRQ handlerFelipe Balbi
__ffs() will be far faster than the for loop used. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Make twl4030 SIH SPARSE_IRQ capableBenoit Cousson
twl4030 is using a two level irq controllers infrastruture. So far, only the first level was using dynamic irq_desc allocation to be able to have irq_domain support for device tree. There is a need to allocate separate irq_descs for the SIH too to avoid hacking the first level with interrupts from the second level. Add an irq_base parameter to allow the caller to provide the base from pdata or from dynamic allocation. Affect TWL4030_NR_IRQS to the twl-core IRQs only. Moreover that will allow the extraction of the of_node pointer for further Device Tree conversion. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq filesBenoit Cousson
During DT adaptation, the irq_alloc_desc was added into twl-core, but due to the rather different and weird IRQ management required by the twl4030, it is much better to have a different approach for it. The issue is that twl4030 uses a two level IRQ mechanism but handles all the PWR interrupts as part of the twl-core interrupt range. It ends up with a range of 16 interrupts total for CORE and PWR. The other twl4030 functionalities already have a dedicated driver and thus their IRQs and irqdomain can and should be defined localy. twl6030 is using a single level IRQ controller and thus does not require any trick. Move the irq_alloc_desc and irq_domain_add_legacy in twl4030-irq and twl6030-irq. Allocate together CORE and PWR IRQs for twl4030-irq. Conflicts: drivers/mfd/twl-core.c Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Remove references already defineid in header file from twl-coreBenoit Cousson
The twl-core exported functions are already declared in twl-core.h Include the header file instead or re-declaring the functions. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Remove unneeded header from twl-coreFelipe Balbi
This driver doesn't really need <plat/cpu.h>, so remove it. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Make twl-core not depend on pdata->irq_base/endFelipe Balbi
With sparse IRQs the driver shouldn't depend at all on any IRQ values coming from board-file. Remove every occurences of pdata->irq_base/end. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Return twl6030_mmc_card_detect IRQ for board setupBenoit Cousson
Card detect IRQ from the TWL6030 used to be provided to the MMC controller code using a statically allocated IRQ scheme: card_detect_irq = TWL6030_IRQ_BASE + MMCDETECT_INTR_OFFSET; This is no longer valid in a SPARSE_IRQ context since there is no more pre-defined TWL6030_IRQ_BASE. Return the proper card detect IRQ value in the twl6030_mmc_card_detect_config that will be called from the MMC controller. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-21Merge tag 'regulator-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates for 3.4 from Mark Brown: "This has been a fairly quiet release from a regulator point of view, the only real framework features added were devm support and a convenience helper for setting up fixed voltage regulators. We also added a couple of drivers (but will drop the BQ240022 driver via the arm-soc tree as it's been replaced by the more generic gpio-regulator driver) and Axel Lin continued his relentless and generally awesome stream of fixes and cleanups." * tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (93 commits) regulator: Fix up a confusing dev_warn when DT lookup fails regulator: Convert tps6507x to set_voltage_sel regulator: Refactor tps6507x to use one tps6507x_pmic_ops for all LDOs and DCDCs regulator: Make s5m8767_get_voltage_register always return correct register regulator: s5m8767: Check pdata->buck[2|3|4]_gpiodvs earlier regulator: tps65910: Provide settling time for DCDC voltage change regulator: Add Anatop regulator driver regulator: Simplify implementation of tps65912_get_voltage_dcdc regulator: Use tps65912_set_voltage_sel for both DCDCx and LDOx regulator: tps65910: Provide settling time for enabling rails regulator: max8925: Use DIV_ROUND_UP macro regulator: tps65912: Use simple equations to get register address regulator: Fix the logic of tps65910_get_mode regulator: Merge tps65217_pmic_ldo234_ops and tps65217_pmic_dcdc_ops to tps65217_pmic_ops regulator: Use DIV_ROUND_CLOSEST in wm8350_isink_get_current regulator: Use array to store dcdc_range settings for tps65912 regulator: Rename s5m8767_convert_voltage to s5m8767_convert_voltage_to_sel regulator: tps6524x: Remove unneeded comment for N_REGULATORS regulator: Rename set_voltage_sel callback function name to *_sel regulator: Fix s5m8767_set_voltage_time_sel calculation value ...
2012-03-21Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull irq_domain support for all architectures from Grant Likely: "Generialize powerpc's irq_host as irq_domain This branch takes the PowerPC irq_host infrastructure (reverse mapping from Linux IRQ numbers to hardware irq numbering), generalizes it, renames it to irq_domain, and makes it available to all architectures. Originally the plan has been to create an all-new irq_domain implementation which addresses some of the powerpc shortcomings such as not handling 1:1 mappings well, but doing that proved to be far more difficult and invasive than generalizing the working code and refactoring it in-place. So, this branch rips out the 'new' irq_domain and replaces it with the modified powerpc version (in a fully bisectable way of course). It converts all users over to the new API and makes irq_domain selectable on any architecture. No architecture is forced to enable irq_domain, but the infrastructure is required for doing OpenFirmware style irq translations. It will even work on SPARC even though SPARC has it's own mechanism for translating irqs at boot time. MIPS, microblaze, embedded x86 and c6x are converted too. The resulting irq_domain code is probably still too verbose and can be optimized more, but that can be done incrementally and is a task for follow-on patches." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: (31 commits) dt: fix twl4030 for non-dt compile on x86 mfd: twl-core: Add IRQ_DOMAIN dependency devicetree: Add empty of_platform_populate() for !CONFIG_OF_ADDRESS (sparc) irq_domain: Centralize definition of irq_dispose_mapping() irq_domain/mips: Allow irq_domain on MIPS irq_domain/x86: Convert x86 (embedded) to use common irq_domain ppc-6xx: fix build failure in flipper-pic.c and hlwd-pic.c irq_domain/microblaze: Convert microblaze to use irq_domains irq_domain/powerpc: Replace custom xlate functions with library functions irq_domain/powerpc: constify irq_domain_ops irq_domain/c6x: Use library of xlate functions irq_domain/c6x: constify irq_domain structures irq_domain/c6x: Convert c6x to use generic irq_domain support. irq_domain: constify irq_domain_ops irq_domain: Create common xlate functions that device drivers can use irq_domain: Remove irq_domain_add_simple() irq_domain: Remove 'new' irq_domain in favour of the ppc one mfd: twl-core.c: Fix the number of interrupts managed by twl4030 of/address: add empty static inlines for !CONFIG_OF irq_domain: Add support for base irq and hwirq in legacy mappings ...
2012-03-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "It's indeed trivial -- mostly documentation updates and a bunch of typo fixes from Masanari. There are also several linux/version.h include removals from Jesper." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits) kcore: fix spelling in read_kcore() comment constify struct pci_dev * in obvious cases Revert "char: Fix typo in viotape.c" init: fix wording error in mm_init comment usb: gadget: Kconfig: fix typo for 'different' Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c" writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header writeback: fix typo in the writeback_control comment Documentation: Fix multiple typo in Documentation tpm_tis: fix tis_lock with respect to RCU Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c" Doc: Update numastat.txt qla4xxx: Add missing spaces to error messages compiler.h: Fix typo security: struct security_operations kerneldoc fix Documentation: broken URL in libata.tmpl Documentation: broken URL in filesystems.tmpl mtd: simplify return logic in do_map_probe() mm: fix comment typo of truncate_inode_pages_range power: bq27x00: Fix typos in comment ...
2012-03-20mfd: Add support for TPS65090Venu Byravarasu
TPS65090 is a Texas Instrument PMIC. It contains 3 Step-Down converters, 2 always on LDO's and 7 current limited load switches. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-20mfd: Add some da9052-i2c section annotationsDmitry Torokhov
da9052_i2c_remove() can and should be marked as __devexit. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-20mfd: Build rtc5t583 only if I2C config is selected to y.Laxman Dewangan
Fixing build error reported by Stephen Rothwell: drivers/built-in.o: In function `rc5t583_i2c_init': rc5t583.c:(.init.text+0xb3db): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `rc5t583_i2c_probe': rc5t583.c:(.devinit.text+0x8fa0): undefined reference to `regmap_init_i2c' drivers/built-in.o: In function `rc5t583_i2c_exit': rc5t583.c:(.exit.text+0x708): undefined reference to `i2c_del_driver' Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-19Merge tag 'topic/twl' into regulator-nextMark Brown
TWL specific changes, cross-merged with OMAP due to arch/arm wanting to use the new ability to override the voltage set and get operations to support the in-CPU voltage management. The other changes are minor fixes, the addition of a few new regulators and device tree support.
2012-03-18Merge remote-tracking branch 'regulator/topic/supply' into regulator-nextMark Brown
2012-03-16mfd: Add anatop mfd driverYing-Chun Liu (PaulLiu)
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Venu Byravarasu <vbyravarasu@nvidia.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Rob Lee <rob.lee@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Add 8420 variant to db8500-prcmuBengt Jonsson
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Add 8520 PRCMU variant to db8500-prcmuBengt Jonsson
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Mattias Nilssson <mattias.i.nilsson@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Remove obsolete hwacc implementation for db8500-prmcuMattias Nilsson
This patch removes the obsolete hwacc implementation in the DB8500 PRCMU driver. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Use DIV_ROUND_CLOSEST for sm501 clockAxel Lin
Use DIV_ROUND_CLOSEST to replace sm501fb_round_div function. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Add support for RICOH PMIC RC5T583Laxman Dewangan
Ricoh power management IC RC5T583 contains is multi functional device having multiple sub devices inside this. This device has multiple dcdc/ldo regulators, gpios, interrupt controllers, on-key, RTCs, ADCs. This device have 4 DCDCs, 8 LDOs, 8 GPIOs, 6 ADCs, 3 RTCs etc. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Make use of the ab8500 firmware read-modify-write serviceMattias Nilsson
This patch updates the AB8500 driver to make use of the I2C read-modify-write service in the PRCMU firmware. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Add a prcmu_abb_write_masked routine to db8500-prcmuMattias Nilsson
This patch adds driver support for the I2C read-modify-write service in the U8500 PRCMU firmware. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Support for the AB8500 AB8505 variantBengt Jonsson
This builds upon the changes done to support AB9540 so as also to support the AB8505 derivative of the AB8500 circuit. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Don't use mutex_lock_interruptible in ab8500-coreRabin Vincent
This disadvantage of having it interruptible is that it would appear to work OK in most situations, but in the rare case that this call does fail, it can lead to misconfiguration of the AB, such as a regulator not being turned off and leading to a platform power consumption increase. There's no real benefit to having this interruptible. Make it a plain mutex_lock. The non-interruptability matches other low-level I/O functions such as SPI and I2C. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Use correct variable name for tps65910 regmap configLaxman Dewangan
This was the copy-paste issue in reg cache support code where variable name for regmap config was not really starting from the device name, it was starting from some other device name. Fixing this so that variable name contains actual device name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: wm8994: Fix register default for WM1811 AntiPOP2Mark Brown
Should be all bits clear. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: wm8994: Remove defaults for volatile registersMark Brown
Some volatile registers accidentally had defaults added, though there were no harmful side effects other than increased memory consumption. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-11mfd: twl-core: regulator configuration for twl6030 V1V8, V2V1 SMPSPeter Ujfalusi
To be able to attach consumers to these supplies from board files we need to have regulator_init_data for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulatorsTero Kristo
vdd1 and vdd2 are now common regulators for twl4030 and twl6030. Also added vdd3 as a new regulator for twl6030. twl6030 vdd1...vdd3 smps regulator voltages can only be controlled through the smartreflex voltage channel, thus the support for the voltage_get and set is minimal and requires external controller. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: twl4030: add support for external voltage get/setTero Kristo
This is needed for SMPS regulators, which use the OMAP voltage processor for voltage get/set functions instead of the normal I2C channel. For this purpose, regulator_init_data->driver_data contents are expanded, it is now a struct which contains function pointers for the set/get voltage operations, a data pointer for these, and the previously used features bitmask. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> [for the MFD part] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11device.h: cleanup users outside of linux/include (C files)Paul Gortmaker
For files that are actively using linux/device.h, make sure that they call it out. This will allow us to clean up some of the implicit uses of linux/device.h within include/* without introducing build regressions. Yes, this was created by "cheating" -- i.e. the headers were cleaned up, and then the fallout was found and fixed, and then the two commits were reordered. This ensures we don't introduce build regressions into the git history. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-03-06mfd: Fix pm8606 build failureSamuel Ortiz
Reported by Andrew Morton <akpm@linux-foundation.org>, with i386 allmodconfig: ERROR: "pm8606_osc_disable" [drivers/video/backlight/88pm860x_bl.ko] undefined! ERROR: "pm8606_osc_enable" [drivers/video/backlight/88pm860x_bl.ko] undefined! ERROR: "pm8606_osc_disable" [drivers/leds/leds-88pm860x.ko] undefined! ERROR: "pm8606_osc_enable" [drivers/leds/leds-88pm860x.ko] undefined! Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Fix a typo in MFD_MAX8997 Kconfig entryAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd : Check if the other db8500 core is in WFIDaniel Lezcano
This patch allows to check if the other core is in WFI mode. It is the last check the idle routine has to do before entering into the retention state. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd : Check if the db8500 prcmu has pending irqDaniel Lezcano
This patch allows to check if there are some pending irqs on the prcmu. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd : Copy the db8500 gic setting to the prcmuDaniel Lezcano
In the case we go to the retention mode, we decoupled the gic in order to have the A9 core to reach a stable WFI state. But we want the prcmu to wake up the A9 when the gic has a pending irq which is done by copying the gic settings to the to the prcmu. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd : Check if there are pending irq on the db8500 gicDaniel Lezcano
This patch introduces a routine to check if there are some irqs pending on the gic. Usually this check is not relevant because it appears racy (an irq can arrive right after this check), but in the ux500 it makes sense because the prcmu decouples the gic from the A9 cores. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd : Cleanup duplicate db8500 definitionsDaniel Lezcano
I missed in my previous patch the A9_MASK_REQ[_MASK] were already defined. Let's remove the duplicate definitions. The PRCMU_GIC_DELAY macro could be removed as it is not really useful here. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>