summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2011-07-31mfd: Fix mismatch in twl4030 mutex lock-unlockSanjeev Premi
A mutex is locked on entry into twl4030_madc_conversion(). Immediate return on some error conditions leaves the mutex locked. This patch ensures that mutex is always unlocked before leaving the function. Signed-off-by: Sanjeev Premi <premi@ti.com> Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: twl6030-pwm.c needs MODULE_LICENSERandy Dunlap
twl6030_pwm: module license 'unspecified' taints kernel. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Hemanth V <hemanthv@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Fix the omap-usb-host clock API usage on usbhs_disable()Keshava Munegowda
usbhs_disable function was invoking clk_enable() instead of clk_disable(), thus only increasing the clock usage counter and preventing this particular clock from being ever turned off. Because of this, the power domain of omap4 the USB Host subsystem would never reach lower power states.This patch calls clk_disable() in usbhs_disable function Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Acknowledge WM8994 IRQs before reportingMark Brown
This ensures we never have a window where we've handled an interrupt but not told the hardware about it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Acknowlege all WM831x IRQs before we handle themMark Brown
Ensure that we never have a window where we've handled an interrupt (and therefore need to be notified of new events) but haven't yet told the interrupt controller that this is the case (so any new events will be discarded). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Avoid two assignments if failures happen in tps65910_i2c_probeJesper Juhl
In drivers/mfd/tps65910.c:tps65910_i2c_probe() there's potential for a tiny optimization. We assign to init_data->irq and init_data->irq_base long before we need them, and there are two potential exits from the function before they are needed. Moving the assignments below these two potential exits means we completely avoid doing them in these two (failure) cases. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Don't leak init_data in tps65910_i2c_probeJesper Juhl
There are a couple of situations where we leak init_data in drivers/mfd/tps65910.c:tps65910_i2c_probe() - this patch should take care of them. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Add AAT2870 mfd driverJin Park
Add mfd core driver for AnalogicTech AAT2870. The AAT2870 is communication through I2C and contains backlight and regulator components. Signed-off-by: Jin Park <jinyoungp@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Remove dead code from max8997-irqJesper Juhl
We either hit one of the case's or the default in the switch statement in get_i2c(), so the 'return ERR_PTR(-EINVAL);' at the end of the function is just dead code - remove it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Move TPS55910 Kconfig optionLinus Walleij
Having another TPS chip at the end of the Kconfig when all it's relatives are grouped together in their own section seems totally counter-intuitive. Move it, also in the Makefile. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Fix missing stmpe kerneldocOm Prakash
Generating kerneldoc for STMPE result in warnings, so fix this by adding missing documentation. Signed-off-by: Om Prakash <omprakash.pal@stericsson.com> Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Fix off-by-one value range checking for tps65912_i2c_writeAxel Lin
If bytes == (TPS6591X_MAX_REGISTER + 1), we have a buffer overflow when doing memcpy(&msg[1], src, bytes). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Add devices for WM831x clocking moduleMark Brown
With the new generic clk API that should appear at some point we should be able to support the clocking sensibly in Linux. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Remove comp{1,2}_threshold sysfs entries in tps65911_comparator_removeAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Don't ask about the TPS65912 core driver in KconfigMark Brown
The user has to select the I2C and SPI drivers individually and they select the core driver for the device so there's no point in presenting the user with an option for the core driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Fix off by one in WM831x IRQ codeDimitris Papastamos
The GPIO IRQs aren't the first IRQs defined, we need to subtract the base for the GPIOs as well to use them for array indexes. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Add tps65921 support from twl-coreOleg Drokin
Very similar to TPS65920 List of differences: http://www.ti.com/litv/pdf/swcu066b Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Ensure value written by wm831x_set_bits() is within the maskMark Brown
Purely for defensiveness. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Implement tps65910 IRQ cleanupMark Brown
The tps65910_irq_exit() cleanup function was generating a warning from sparse due to the lack of a prototype. This wasn't causing GCC warnings as the driver wasn't cleaning up its IRQs on exit at all so there was no use of an unprototyped function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Add tunnelcreek watchdog to lpc_sch devicesAlexander Stein
Tunnel Creek has an additional watchdog core. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Update ab8500 subdevice listLinus Walleij
This synchronize the subdevice entries for the AB8500 MFD driver with the latest development of subdrivers for things like battery charging and temperature monitoring. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: ab8500-core MFD devices marked as initdataRobert Rosengren
Internal MFD device structs are marked as __devinitdata since the kernel will allocate memory for the same when calling mfd_add_devices. Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com> Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Johan Palsson <johan.palsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31tps65912: irq: add interrupt controllerMargarita Olaya
This module controls the interrupt handling for the tps65912. The interrupt sources can be the following: - GPIO - PWRON signal - PWRHOLD signal - Temperature detection Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: tps65912: Add new mfd deviceMargarita Olaya
The tps65912 chip is a power management IC. It contains the following components: - Regulators - GPIO controller The core driver is registered as a platform driver, it provides communication through I2C and SPI interfaces. Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Use kstrtoul_from_user in ab8500Peter Huewe
This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Use kstrtoul_from_user in ab3550Peter Huewe
This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Use generic irq chip for jz4740-adcLars-Peter Clausen
Use the generic irq chip framework for implementing the irq chip for the jz4740-adc driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Fix error handling if BUG() isn't enabled in WM8994Mark Brown
Even if we would've BUG()ed we should still tidy up after ourselves if that isn't enabled in the kernel config. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Fix WM8994 IRQ register cache restore on resumeMark Brown
When the byte swap was factored out into the per-register I/O functions the register restore for the IRQ mask cache (which we use and store in CPU native format for the interrupt handler) was not updated to do a byte swap when it uses the bulk I/O. Fix this by writing the cache out one register at a time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Support multiple active WM831x AUXADC conversionsMark Brown
The WM831x AUXADC hardware can schedule multiple conversions at once, allowing higher performance when more than one source is in use as we can have the hardware start new conversions without having to wait for a register write. Take advantage of this in the interrupt driven case, maintaining a list of callers that are waiting for AUXADC conversions and completing them all simultaneously. The external interface of the AUXADC is not changed so there will be limited use of the feature immediately. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Restructure wm8994-core device revision handlingMark Brown
Switch on the device type before revision since anything we do here will be device as well as revision specific. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Allocate wm835x irq descs dynamicallySascha Hauer
This allows boards to leave the irq_base field unitialized and prevents them having to reserve irqs in the platform. pdata can be optional for irq support now. Without pdata the driver allocates some free irq range. With pdata and irq_base > 0 the driver allocates exactly the specified irq. Without pdata the irq defaults to IRQF_TRIGGER_LOW. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Refactor wm831x AUXADC handling into a separate fileMark Brown
In preparation for some additional work on the wm831x AUXADC code move the support into a separate file. This is a simple code motion patch, there should be no functional changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Read wm831x AUXADC conversion results before acknowledging interruptMark Brown
Ensure that there's no possibility of loosing an AUXADC interrupt by reading the conversion result in the IRQ handler when using interrupts. Otherwise it's possible that under very heavy load a new conversion could be initiated before the acknowledgement for a previous interrupt has happened. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Support dynamic allocation of IRQ range for wm831xMark Brown
Use irq_allocate_desc() to get the IRQ range, which turns into a noop on non-sparse systems. Since all existing users are non-sparse there should be no compatibility issues. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Only register wm831x RTC device if the 32.768kHz crystal is enabledMark Brown
The RTC uses the 32.768kHz crystal so if it's not enabled (and it can only be enabled via OTP or InstantConfig, not runtime software) the RTC can't function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Allow touchscreen to be disabled on wm831x devicesMark Brown
Allow platform data to flag the touchscreen as disabled so that if the touch driver is built in we don't end up causing lots of work by spuriously detecting touchscreen activity on systems where it isn't in use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Implement support for multiple WM831x devicesMark Brown
Systems using this functionality will be uncommon. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Fix bus lock interaction for WM831x IRQ set_type() operationMark Brown
The WM831x IRQ set_type() operation is doing a direct register write when called but since set_type() is called with the bus lock held this isn't legal and could cause deadlocks in the IRQ core. Fix this by posting the updates into an array and syncing in the bus_sync_unlock() callback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: gpio-charger: Fix checking return value of request_any_context_irq power_supply: MAX17042: Support additional properties max8903_charger: Allow platform data to be __initdata power_supply: Add charger driver for MAX8998/LP3974 power_supply: Add charger driver for MAX8997/8966 max17042_battery: Remove obsolete cleanup for clientdata twl4030_charger: Fix warnings wm831x_power: Support multiple instances wm831x_backup: Support multiple instances apm_power: Fix style error in macros s3c_adc_battery: Fix annotation for s3c_adc_battery_probe() bq20z75: Enable detection after registering bq20z75: Add support for external notification
2011-07-30Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits) [media] ir-mce_kbd-decoder: include module.h for its facilities [media] ov5642: include module.h for its facilities [media] em28xx: Fix DVB-C maxsize for em2884 [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz [media] v4l: mt9v032: Fix Bayer pattern [media] V4L: mt9m111: rewrite set_pixfmt [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear [media] V4L: initial driver for ov5642 CMOS sensor [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails [media] V4L: soc-camera: remove soc-camera bus and devices on it [media] V4L: soc-camera: un-export the soc-camera bus [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier [media] V4L: add media bus configuration subdev operations [media] V4L: soc-camera: group struct field initialisations together [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks [media] V4L: pxa-camera: switch to using standard PM hooks [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param [media] Don't OOPS if videobuf_dvb_get_frontend return NULL [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision [media] omap3isp: Support configurable HS/VS polarities ... Fix up conflicts: - arch/arm/mach-omap2/board-rx51-peripherals.c: cleanup regulator supply definitions in mach-omap2 vs OMAP3: RX-51: define vdds_csib regulator supply - drivers/staging/tm6000/tm6000-alsa.c (trivial)
2011-07-27[media] radio-timb: Simplified platform dataRichard Röjfors
This patch simplifies the platform data slightly, by removing unused elements. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-26Merge branch 'next/devel2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (47 commits) OMAP: Add debugfs node to show the summary of all clocks OMAP2+: hwmod: Follow the recommended PRCM module enable sequence OMAP2+: clock: allow per-SoC clock init code to prevent clockdomain calls from clock code OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programming OMAP2+: PM: idle clkdms only if already in idle OMAP2+: clockdomain: add clkdm_in_hwsup() OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod framework OMAP: clockdomain: Remove redundant call to pwrdm_wait_transition() OMAP4: hwmod: Introduce the module control in hwmod control OMAP4: cm: Add two new APIs for modulemode control OMAP4: hwmod data: Add modulemode entry in omap_hwmod structure OMAP4: hwmod data: Add PRM context register offset OMAP4: prm: Remove deprecated functions OMAP4: prm: Replace warm reset API with the offset based version OMAP4: hwmod: Replace RSTCTRL absolute address with offset macros OMAP: hwmod: Wait the idle status to be disabled OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros OMAP2+: hwmod: Init clkdm field at boot time OMAP4: hwmod data: Add clock domain attribute OMAP4: clock data: Add missing divider selection for auxclks ...
2011-07-11Merge branch 'master' into for-nextJiri Kosina
Sync with Linus' tree to be able to apply pending patches that are based on newer code already present upstream.
2011-07-08w1: ds1wm: add a reset recovery parameterJean-François Dagenais
This fixes a regression in 3.0 reported by Paul Parsons regarding the removal of the msleep(1) in the ds1wm_reset() function: : The linux-3.0-rc4 DS1WM 1-wire driver is logging "bus error, retrying" : error messages on an HP iPAQ hx4700 PDA (XScale-PXA270): : : <snip> : Driver for 1-wire Dallas network protocol. : DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko : 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko : ds1wm ds1wm: pass: 1 bus error, retrying : ds1wm ds1wm: pass: 2 bus error, retrying : ds1wm ds1wm: pass: 3 bus error, retrying : ds1wm ds1wm: pass: 4 bus error, retrying : ds1wm ds1wm: pass: 5 bus error, retrying : ... : : The visible result is that the battery charging LED is erratic; sometimes : it works, mostly it doesn't. : : The linux-2.6.39 DS1WM 1-wire driver worked OK. I haven't tried 3.0-rc1, : 3.0-rc2, or 3.0-rc3. This sleep should not be required on normal circuitry provided the pull-ups on the bus are correctly adapted to the slaves. Unfortunately, this is not always the case. The sleep is restored but as a parameter to the probe function in the pdata. [akpm@linux-foundation.org: coding-style fixes] Reported-by: Paul Parsons <lost.distance@yahoo.com> Tested-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Jean-François Dagenais <dagenaisj@sonatest.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-08power_supply: Add charger driver for MAX8998/LP3974Donggeun Kim
This patch supports power supply APIs for MAX8998/LP3974. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: KyungMin Park <kyungmin.park@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-07MFD: twl6040: Remove enum for PLL trackingPeter Ujfalusi
There is no need to have two different types for tracking the selected PLL. Use only the defines, when dealing with the PLLs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-07MFD: twl6040: Remove wrapper for threaded irq requestPeter Ujfalusi
Remove the twl6040_request_irq/free_irq inline functions, and use direct calls instead in the core driver to register the threaded irq. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-07MFD: twl6040: Demand valid interrupt configurationPeter Ujfalusi
In order to operate correctly twl6040 needs correct interrupt configuration. The slave drivers (vibra, and ASoC codec) will refuse to probe, if the interrupt configuration is not correct. In this way some checks can be removed from the code. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-07MFD: twl6040: Use resource to provide irq number for slavesPeter Ujfalusi
Provide the irq number for slaves via resource on the platform device. The irq number configuration is done in the twl6040-core at probe time, so machine drivers do not need to be modified. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>