summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-03-10ariadne: remove redundant NULL checkj223yang@asset.uwaterloo.ca
Simply remove redundant 'dev' NULL check. Signed-off-by: Jinqiu Yang <crindy646@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08r6040: bump to version 0.27 and date 23Feb2011Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08r6040: fix multicast operationsShawn Lin
The original code does not work well when the number of mulitcast address to handle is greater than MCAST_MAX. It only enable promiscous mode instead of multicast hash table mode, so the hash table function will not be activated and all multicast frames will be recieved in this condition. This patch fixes the following issues with the r6040 NIC operating in multicast: 1) When the IFF_ALLMULTI flag is set, we should write 0xffff to the NIC hash table registers to make it process multicast traffic. 2) When the number of multicast address to handle is smaller than MCAST_MAX, we should use the NIC multicast registers MID1_{L,M,H}. 3) The hashing of the address was not correct, due to an invalid substraction (15 - (crc & 0x0f)) instead of (crc & 0x0f) and an incorrect crc algorithm (ether_crc_le) instead of (ether_crc). 4) If necessary, we should set HASH_EN flag in MCR0 to enable multicast hash table function. Reported-by: Marc Leclerc <marc-leclerc@signaturealpha.com> Tested-by: Marc Leclerc <marc-leclerc@signaturealpha.com> Signed-off-by: Shawn Lin <shawn@dmp.com.tw> Signed-off-by: Albert Chen <albert.chen@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07bonding 802.3ad: Rename rx_machine_lock to state_machine_lockNils Carlson
Rename the rx_machine_lock to state_machine_lock as this makes more sense in light of it now protecting all the state machines against concurrency. Signed-off-by: Nils Carlson <nils.carlson@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07bonding 802.3ad: Fix the state machine locking v2Nils Carlson
Changes since v1: * Clarify an unclear comment * Move a (possible) name change to a separate patch The ad_rx_machine, ad_periodic_machine and ad_port_selection_logic functions all inspect and alter common fields within the port structure. Previous to this patch, only the ad_rx_machines were mutexed, and the periodic and port_selection could run unmutexed against an ad_rx_machine trigged by an arriving LACPDU. This patch remedies the situation by protecting all the state machines from concurrency. This is accomplished by locking around all the state machines for a given port, which are executed at regular intervals; and the ad_rx_machine when handling an incoming LACPDU. Signed-off-by: Nils Carlson <nils.carlson@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07drivers/net/macvtap: fix error checkNicolas Kaiser
'len' is unsigned of type size_t and can't be negative. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07net/smsc911x.c: Set the VLAN1 register to fix VLAN MTU problemGöran Weinholt
The smsc911x driver would drop frames longer than 1518 bytes, which is a problem for networks with VLAN tagging. The VLAN1 tag register is used to increase the legal frame size to 1522 when a VLAN tag is identified. Signed-off-by: Göran Weinholt <weinholt@csbnet.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-06bnx2x: fix MaxBW configurationDmitry Kravkov
Increase resolution of MaxBW algorithm to suit Min Bandwidth configuration. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-06bnx2x: (NPAR) prevent HW access in D3 stateDmitry Kravkov
Changing speed setting in NPAR requires HW access, this patch delays the access to D0 state when performed in D3. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-06bnx2x: fix link notificationDmitry Kravkov
Report link to OS and other PFs after HW is fully reconfigured according to new link parameters. (Affected only Multi Function modes). Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-06bnx2x: fix non-pmf device load flowDmitry Kravkov
Remove port MAX BW configuration from non-pmf functions, which caused reconfigure of HW according to 10G (fake) link. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03r8169: disable ASPMStanislaw Gruszka
For some time is known that ASPM is causing troubles on r8169, i.e. make device randomly stop working without any errors in dmesg. Currently Tomi Leppikangas reports that system with r8169 device hangs with MCE errors when ASPM is enabled: https://bugzilla.redhat.com/show_bug.cgi?id=642861#c4 Lets disable ASPM for r8169 devices at all, to avoid problems with r8169 PCIe devices at least for some users. Reported-by: Tomi Leppikangas <tomi.leppikangas@gmail.com> Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02cnic: Fix lost interrupt on bnx2xMichael Chan
We service 2 queues (kcq1 and kcq2) in cnic_service_bnx2x_bh(). If the status block index has changed when servicing the kcq2, we must go back and check kcq1. The latest status block index will be used to acknowledge the interrupt, and without looping back to check kcq1, we may miss events on kcq1. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02cnic: Prevent status block race conditions with hardwareMichael Chan
The status block index is used to acknowledge interrupt events and must be read before checking for the interrupt events, so we need to add rmb() to guarantee that. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-2.6
2011-03-02e1000e: disable broken PHY wakeup for ICH10 LOMs, use MAC wakeup insteadBruce Allan
When support for 82577/82578 was added[1] in 2.6.31, PHY wakeup was in- advertently enabled (even though it does not function properly) on ICH10 LOMs. This patch makes it so that the ICH10 LOMs use MAC wakeup instead as was done with the initial support for those devices (i.e. 82567LM-3, 82567LF-3 and 82567V-4). [1] commit a4f58f5455ba0efda36fb33c37074922d1527a10 Reported-by: Aurelien Jarno <aurelien@aurel32.net> Cc: <stable@kernel.org> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-02igb: fix sparse warningJeff Kirsher
Reported-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-02e1000: fix sparse warningStephen Hemminger
Sparse complains because the e1000 driver is calling ioread on a pointer not tagged as __iomem. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-28davinci_emac: Add Carrier Link OK check in Davinci RX HandlerHegde, Vinay
This patch adds an additional check in the Davinci EMAC RX Handler, which tests the __LINK_STATE_NOCARRIER flag along with the __LINK_STATE_START flag as part EMAC shutting down procedure. This avoids WARNING: at drivers/net/davinci_emac.c:1040 emac_rx_handler+0xf8/0x120() during rtcwake used to suspend the target for a specified duration. Signed-off-by: Hegde, Vinay <vinay.hegde@ti.com> Acked-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28bnx2x: update driver version to 1.62.00-6Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28bnx2x: properly calculate lro_mssVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28bnx2x: perform statistics "action" before state transition.Vladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28bnx2x: properly configure coefficients for MinBW algorithm (NPAR mode).Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28bnx2x: Fix ethtool -t link test for MF (non-pmf) devices.Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28bnx2x: Fix nvram test for single port devices.Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28bnx2x: (NPAR mode) Fix FW initializationDmitry Kravkov
Fix FW initialization according to max BW stored in percents for NPAR mode. Protect HW from being configured to speed 0. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28net/fec: fix unterminated platform_device_id tableAxel Lin
The platform_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28dnet: fix wrong use of platform_set_drvdata()Ilya Yanok
platform_set_drvdata() was used with argument of incorrect type and could cause memory corruption. Moreover, because of not setting drvdata in the correct place not all resources were freed upon module unload. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28macb: don't use platform_set_drvdata() on a net_deviceJamie Iles
Commit 71d6429 (Driver core: convert platform_{get,set}_drvdata to static inline functions) now triggers a warning in the macb network driver: CC drivers/net/macb.o drivers/net/macb.c: In function ‘macb_mii_init’: drivers/net/macb.c:263: warning: passing argument 1 of ‘platform_set_drvdata’ from incompatible pointer type include/linux/platform_device.h:138: note: expected ‘struct platform_device *’ but argument is of type ‘struct net_device *’ Use dev_set_drvdata() on the device embedded in the net_device instead. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28CAN: add controller hardware name for Softing cardsKurt Van Dijck
I just found that the controller hardware name is not set for the Softing driver. After this patch, "$ ip -d link show" looks nicer. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28fmvj18x_cs: add new idKen Kawasaki
fmvj18x_cs:add new id Toshiba lan&modem multifuction card (model name:IPC5010A) Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28p54usb: add Senao NUB-350 usbidChristian Lamparter
Reported-by: Mark Davis Cc: <stable@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28ath9k_htc: Fix an endian issueSujith Manoharan
The stream length/tag fields have to be in little endian format. Fixing this makes the driver work on big-endian platforms. Cc: stable@kernel.org Tested-by: raghunathan.kailasanathan@wipro.com Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-27bnx2x: Add a missing bit for PXP parity register of 57712.Vladislav Zolotarov
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25rndis_wlan: use power save only for BCM4320bJussi Kivilinna
BCM4320a breaks when enabling power save (bug 29732). So disable power save for anything but BCM4320b that is known to work. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25carl9170: add Airlive X.USB a/b/g/n USBIDJan Puk
"AirLive X.USB now works perfectly under a Linux environment!" Cc: <stable@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25ath9k: correct ath9k_hw_set_interruptsStanislaw Gruszka
Commit 4df3071ebd92ef7115b409da64d0eb405d24a631 "ath9k_hw: optimize interrupt mask changes", changed ath9k_hw_set_interrupts function to enable interrupts regardless of function argument, what could possibly be wrong. Correct that behaviour and check "ints" arguments before enabling interrupts, also disable interrupts if ints do not have ATH9K_INT_GLOBAL flag set. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25Merge branch 'wireless-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2011-02-24skge: don't mark carrier down at startStephen Hemminger
The API for network devices has changed so that setting carrier off at probe is no longer required. This should fix the IPv6 addrconf issue. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=29612 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reported-by: George Billios <gbillios@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23Merge branch 'r8169-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2011-02-23Added support for usb ethernet (0x0fe6, 0x9700)Shahar Havivi
The device is very similar to (0x0fe6, 0x8101), And works well with dm9601 driver. Signed-off-by: Shahar Havivi <shaharh@redhat.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23r8169: fix RTL8168DP power off issue.Hayes Wang
- fix the RTL8111DP turn off the power when DASH is enabled. - RTL_GIGA_MAC_VER_27 must wait for tx finish before reset. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23r8169: correct settings of rtl8102e.Hayes Wang
Adjust and remove certain settings of RTL8102E which are for previous chips. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-off-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23r8169: fix incorrect args to oob notify.Hayes Wang
It results in the wrong point address and influences RTL8168DP. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23DM9000B: Fix PHY power for network down/upHenry Nestler
DM9000 revision B needs 1 ms delay after PHY power-on. PHY must be powered on by writing 0 into register DM9000_GPR before all other settings will change (see Davicom spec and example code). Remember, that register DM9000_GPR was not changed by reset sequence. Without this fix the FIFO is out of sync and sends wrong data after sequence of "ifconfig ethX down ; ifconfig ethX up". Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23DM9000B: Fix reg_save after spin_lock in dm9000_timeoutHenry Nestler
The spin_lock should hold before reading register. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-22sfc: lower stack usage in efx_ethtool_self_testEric Dumazet
drivers/net/sfc/ethtool.c: In function ‘efx_ethtool_self_test’: drivers/net/sfc/ethtool.c:613: warning: the frame size of 1200 bytes is larger than 1024 bytes Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-21p54pci: update receive dma buffers before and after processingChristian Lamparter
Documentation/DMA-API-HOWTO.txt states: "DMA transfers need to be synced properly in order for the cpu and device to see the most uptodate and correct copy of the DMA buffer." Cc: <stable@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>