Age | Commit message (Collapse) | Author |
|
compare size of allocated cal data buffer from heap
and count bytes provided to write by user to avoid
heap overflow for write cal data.
Change-Id: Id70c3230f761385489e5e94c613f4519239dfb1f
CRs-Fixed: 1032174
Signed-off-by: Anand Kumar <anandkumar@codeaurora.org>
|
|
|
|
|
|
|
|
* tmp-917a9:
ARM/vdso: Mark the vDSO code read-only after init
x86/vdso: Mark the vDSO code read-only after init
lkdtm: Verify that '__ro_after_init' works correctly
arch: Introduce post-init read-only memory
x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option
mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings
asm-generic: Consolidate mark_rodata_ro()
Linux 4.4.6
ld-version: Fix awk regex compile failure
target: Drop incorrect ABORT_TASK put for completed commands
block: don't optimize for non-cloned bio in bio_get_last_bvec()
MIPS: smp.c: Fix uninitialised temp_foreign_map
MIPS: Fix build error when SMP is used without GIC
ovl: fix getcwd() failure after unsuccessful rmdir
ovl: copy new uid/gid into overlayfs runtime inode
userfaultfd: don't block on the last VM updates at exit time
powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages
powerpc/powernv: Add a kmsg_dumper that flushes console output on panic
powerpc: Fix dedotify for binutils >= 2.26
Revert "drm/radeon/pm: adjust display configuration after powerstate"
drm/radeon: Fix error handling in radeon_flip_work_func.
drm/amdgpu: Fix error handling in amdgpu_flip_work_func.
Revert "drm/radeon: call hpd_irq_event on resume"
x86/mm: Fix slow_virt_to_phys() for X86_PAE again
gpu: ipu-v3: Do not bail out on missing optional port nodes
mac80211: Fix Public Action frame RX in AP mode
mac80211: check PN correctly for GCMP-encrypted fragmented MPDUs
mac80211: minstrel_ht: fix a logic error in RTS/CTS handling
mac80211: minstrel_ht: set default tx aggregation timeout to 0
mac80211: fix use of uninitialised values in RX aggregation
mac80211: minstrel: Change expected throughput unit back to Kbps
iwlwifi: mvm: inc pending frames counter also when txing non-sta
can: gs_usb: fixed disconnect bug by removing erroneous use of kfree()
cfg80211/wext: fix message ordering
wext: fix message delay/ordering
ovl: fix working on distributed fs as lower layer
ovl: ignore lower entries when checking purity of non-directory entries
ASoC: wm8958: Fix enum ctl accesses in a wrong type
ASoC: wm8994: Fix enum ctl accesses in a wrong type
ASoC: samsung: Use IRQ safe spin lock calls
ASoC: dapm: Fix ctl value accesses in a wrong type
ncpfs: fix a braino in OOM handling in ncp_fill_cache()
jffs2: reduce the breakage on recovery from halfway failed rename()
dmaengine: at_xdmac: fix residue computation
tracing: Fix check for cpu online when event is disabled
s390/dasd: fix diag 0x250 inline assembly
s390/mm: four page table levels vs. fork
KVM: MMU: fix reserved bit check for ept=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0
KVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 combo
KVM: PPC: Book3S HV: Sanitize special-purpose register values on guest exit
KVM: s390: correct fprs on SIGP (STOP AND) STORE STATUS
KVM: VMX: disable PEBS before a guest entry
kvm: cap halt polling at exactly halt_poll_ns
PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()
ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
ARM: dts: dra7: do not gate cpsw clock due to errata i877
ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window
arm64: account for sparsemem section alignment when choosing vmemmap offset
Linux 4.4.5
drm/amdgpu: fix topaz/tonga gmc assignment in 4.4 stable
modules: fix longstanding /proc/kallsyms vs module insertion race.
drm/i915: refine qemu south bridge detection
drm/i915: more virtual south bridge detection
block: get the 1st and last bvec via helpers
block: check virt boundary in bio_will_gap()
drm/amdgpu: Use drm_calloc_large for VM page_tables array
thermal: cpu_cooling: fix out of bounds access in time_in_idle
i2c: brcmstb: allocate correct amount of memory for regmap
ubi: Fix out of bounds write in volume update code
cxl: Fix PSL timebase synchronization detection
MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp'
MIPS: scache: Fix scache init with invalid line size.
USB: serial: option: add support for Quectel UC20
USB: serial: option: add support for Telit LE922 PID 0x1045
USB: qcserial: add Sierra Wireless EM74xx device ID
USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3)
USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder
usb: chipidea: otg: change workqueue ci_otg as freezable
ALSA: timer: Fix broken compat timer user status ioctl
ALSA: hdspm: Fix zero-division
ALSA: hdsp: Fix wrong boolean ctl value accesses
ALSA: hdspm: Fix wrong boolean ctl value accesses
ALSA: seq: oss: Don't drain at closing a client
ALSA: pcm: Fix ioctls for X32 ABI
ALSA: timer: Fix ioctls for X32 ABI
ALSA: rawmidi: Fix ioctls X32 ABI
ALSA: hda - Fix mic issues on Acer Aspire E1-472
ALSA: ctl: Fix ioctls for X32 ABI
ALSA: usb-audio: Add a quirk for Plantronics DA45
adv7604: fix tx 5v detect regression
dmaengine: pxa_dma: fix cyclic transfers
Fix directory hardlinks from deleted directories
jffs2: Fix page lock / f->sem deadlock
Revert "jffs2: Fix lock acquisition order bug in jffs2_write_begin"
Btrfs: fix loading of orphan roots leading to BUG_ON
pata-rb532-cf: get rid of the irq_to_gpio() call
tracing: Do not have 'comm' filter override event 'comm' field
ata: ahci: don't mark HotPlugCapable Ports as external/removable
PM / sleep / x86: Fix crash on graph trace through x86 suspend
arm64: vmemmap: use virtual projection of linear region
Adding Intel Lewisburg device IDs for SATA
writeback: flush inode cgroup wb switches instead of pinning super_block
block: bio: introduce helpers to get the 1st and last bvec
libata: Align ata_device's id on a cacheline
libata: fix HDIO_GET_32BIT ioctl
drm/amdgpu: return from atombios_dp_get_dpcd only when error
drm/amdgpu/gfx8: specify which engine to wait before vm flush
drm/amdgpu: apply gfx_v8 fixes to gfx_v7 as well
drm/amdgpu/pm: update current crtc info after setting the powerstate
drm/radeon/pm: update current crtc info after setting the powerstate
drm/ast: Fix incorrect register check for DRAM width
target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors
iommu/vt-d: Use BUS_NOTIFY_REMOVED_DEVICE in hotplug path
iommu/amd: Fix boot warning when device 00:00.0 is not iommu covered
iommu/amd: Apply workaround for ATS write permission check
arm/arm64: KVM: Fix ioctl error handling
KVM: x86: fix root cause for missed hardware breakpoints
vfio: fix ioctl error handling
Fix cifs_uniqueid_to_ino_t() function for s390x
CIFS: Fix SMB2+ interim response processing for read requests
cifs: fix out-of-bounds access in lease parsing
fbcon: set a default value to blink interval
kvm: x86: Update tsc multiplier on change.
mips/kvm: fix ioctl error handling
parisc: Fix ptrace syscall number and return value modification
PCI: keystone: Fix MSI code that retrieves struct pcie_port pointer
block: Initialize max_dev_sectors to 0
drm/amdgpu: mask out WC from BO on unsupported arches
btrfs: async-thread: Fix a use-after-free error for trace
btrfs: Fix no_space in write and rm loop
Btrfs: fix deadlock running delayed iputs at transaction commit time
drivers: sh: Restore legacy clock domain on SuperH platforms
use ->d_seq to get coherency between ->d_inode and ->d_flags
Linux 4.4.4
iwlwifi: mvm: don't allow sched scans without matches to be started
iwlwifi: update and fix 7265 series PCI IDs
iwlwifi: pcie: properly configure the debug buffer size for 8000
iwlwifi: dvm: fix WoWLAN
security: let security modules use PTRACE_MODE_* with bitmasks
IB/cma: Fix RDMA port validation for iWarp
x86/irq: Plug vector cleanup race
x86/irq: Call irq_force_move_complete with irq descriptor
x86/irq: Remove outgoing CPU from vector cleanup mask
x86/irq: Remove the cpumask allocation from send_cleanup_vector()
x86/irq: Clear move_in_progress before sending cleanup IPI
x86/irq: Remove offline cpus from vector cleanup
x86/irq: Get rid of code duplication
x86/irq: Copy vectormask instead of an AND operation
x86/irq: Check vector allocation early
x86/irq: Reorganize the search in assign_irq_vector
x86/irq: Reorganize the return path in assign_irq_vector
x86/irq: Do not use apic_chip_data.old_domain as temporary buffer
x86/irq: Validate that irq descriptor is still active
x86/irq: Fix a race in x86_vector_free_irqs()
x86/irq: Call chip->irq_set_affinity in proper context
x86/entry/compat: Add missing CLAC to entry_INT80_32
x86/mpx: Fix off-by-one comparison with nr_registers
hpfs: don't truncate the file when delete fails
do_last(): ELOOP failure exit should be done after leaving RCU mode
should_follow_link(): validate ->d_seq after having decided to follow
xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted.
xen/pciback: Save the number of MSI-X entries to be copied later.
xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY
xen/scsiback: correct frontend counting
xen/arm: correctly handle DMA mapping of compound pages
ARM: at91/dt: fix typo in sama5d2 pinmux descriptions
ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption
do_last(): don't let a bogus return value from ->open() et.al. to confuse us
kernel/resource.c: fix muxed resource handling in __request_region()
sunrpc/cache: fix off-by-one in qword_get()
tracing: Fix showing function event in available_events
powerpc/eeh: Fix partial hotplug criterion
KVM: x86: MMU: fix ubsan index-out-of-range warning
KVM: x86: fix conversion of addresses to linear in 32-bit protected mode
KVM: x86: fix missed hardware breakpoints
KVM: arm/arm64: vgic: Ensure bitmaps are long enough
KVM: async_pf: do not warn on page allocation failures
of/irq: Fix msi-map calculation for nonzero rid-base
NFSv4: Fix a dentry leak on alias use
nfs: fix nfs_size_to_loff_t
block: fix use-after-free in dio_bio_complete
bio: return EINTR if copying to user space got interrupted
i2c: i801: Adding Intel Lewisburg support for iTCO
phy: core: fix wrong err handle for phy_power_on
writeback: keep superblock pinned during cgroup writeback association switches
cgroup: make sure a parent css isn't offlined before its children
cpuset: make mm migration asynchronous
PCI/AER: Flush workqueue on device remove to avoid use-after-free
ARCv2: SMP: Emulate IPI to self using software triggered interrupt
ARCv2: STAR 9000950267: Handle return from intr to Delay Slot #2
libata: fix sff host state machine locking while polling
qla2xxx: Fix stale pointer access.
spi: atmel: fix gpio chip-select in case of non-DT platform
target: Fix race with SCF_SEND_DELAYED_TAS handling
target: Fix remote-port TMR ABORT + se_cmd fabric stop
target: Fix TAS handling for multi-session se_node_acls
target: Fix LUN_RESET active TMR descriptor handling
target: Fix LUN_RESET active I/O handling for ACK_KREF
ALSA: hda - Fixing background noise on Dell Inspiron 3162
ALSA: hda - Apply clock gate workaround to Skylake, too
Revert "workqueue: make sure delayed work run in local cpu"
workqueue: handle NUMA_NO_NODE for unbound pool_workqueue lookup
mac80211: Requeue work after scan complete for all VIF types.
rfkill: fix rfkill_fop_read wait_event usage
tick/nohz: Set the correct expiry when switching to nohz/lowres mode
perf stat: Do not clean event's private stats
cdc-acm:exclude Samsung phone 04e8:685d
Revert "Staging: panel: usleep_range is preferred over udelay"
Staging: speakup: Fix getting port information
sd: Optimal I/O size is in bytes, not sectors
libceph: don't spam dmesg with stray reply warnings
libceph: use the right footer size when skipping a message
libceph: don't bail early from try_read() when skipping a message
libceph: fix ceph_msg_revoke()
seccomp: always propagate NO_NEW_PRIVS on tsync
cpufreq: Fix NULL reference crash while accessing policy->governor_data
cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype
hwmon: (ads1015) Handle negative conversion values correctly
hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook
hwmon: (dell-smm) Blacklist Dell Studio XPS 8000
Thermal: do thermal zone update after a cooling device registered
Thermal: handle thermal zone device properly during system sleep
Thermal: initialize thermal zone device correctly
IB/mlx5: Expose correct maximum number of CQE capacity
IB/qib: Support creating qps with GFP_NOIO flag
IB/qib: fix mcast detach when qp not attached
IB/cm: Fix a recently introduced deadlock
dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
dmaengine: at_xdmac: fix resume for cyclic transfers
dmaengine: dw: fix cyclic transfer callbacks
dmaengine: dw: fix cyclic transfer setup
nfit: fix multi-interface dimm handling, acpi6.1 compatibility
ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot()
ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist"
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700
lib: sw842: select crc32
uapi: update install list after nvme.h rename
ideapad-laptop: Add Lenovo Yoga 700 to no_hw_rfkill dmi list
ideapad-laptop: Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list
toshiba_acpi: Fix blank screen at boot if transflective backlight is supported
make sure that freeing shmem fast symlinks is RCU-delayed
drm/radeon/pm: adjust display configuration after powerstate
drm/radeon: Don't hang in radeon_flip_work_func on disabled crtc. (v2)
drm: Fix treatment of drm_vblank_offdelay in drm_vblank_on() (v2)
drm: Fix drm_vblank_pre/post_modeset regression from Linux 4.4
drm: Prevent vblank counter bumps > 1 with active vblank clients. (v2)
drm: No-Op redundant calls to drm_vblank_off() (v2)
drm/radeon: use post-decrement in error handling
drm/qxl: use kmalloc_array to alloc reloc_info in qxl_process_single_command
drm/i915: fix error path in intel_setup_gmbus()
drm/i915/dsi: don't pass arbitrary data to sideband
drm/i915/dsi: defend gpio table against out of bounds access
drm/i915/skl: Don't skip mst encoders in skl_ddi_pll_select()
drm/i915: Don't reject primary plane windowing with color keying enabled on SKL+
drm/i915/dp: fall back to 18 bpp when sink capability is unknown
drm/i915: Make sure DC writes are coherent on flush.
drm/i915: Init power domains early in driver load
drm/i915: intel_hpd_init(): Fix suspend/resume reprobing
drm/i915: Restore inhibiting the load of the default context
drm: fix missing reference counting decrease
drm/radeon: hold reference to fences in radeon_sa_bo_new
drm/radeon: mask out WC from BO on unsupported arches
drm: add helper to check for wc memory support
drm/radeon: fix DP audio support for APU with DCE4.1 display engine
drm/radeon: Add a common function for DFS handling
drm/radeon: cleaned up VCO output settings for DP audio
drm/radeon: properly byte swap vce firmware setup
drm/radeon: clean up fujitsu quirks
drm/radeon: Fix "slow" audio over DP on DCE8+
drm/radeon: call hpd_irq_event on resume
drm/radeon: Fix off-by-one errors in radeon_vm_bo_set_addr
drm/dp/mst: deallocate payload on port destruction
drm/dp/mst: Reverse order of MST enable and clearing VC payload table.
drm/dp/mst: move GUID storage from mgr, port to only mst branch
drm/dp/mst: Calculate MST PBN with 31.32 fixed point
drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil
drm/dp/mst: fix in RAD element access
drm/dp/mst: fix in MSTB RAD initialization
drm/dp/mst: always send reply for UP request
drm/dp/mst: process broadcast messages correctly
drm/nouveau: platform: Fix deferred probe
drm/nouveau/disp/dp: ensure sink is powered up before attempting link training
drm/nouveau/display: Enable vblank irqs after display engine is on again.
drm/nouveau/kms: take mode_config mutex in connector hotplug path
drm/amdgpu/pm: adjust display configuration after powerstate
drm/amdgpu: Don't hang in amdgpu_flip_work_func on disabled crtc.
drm/amdgpu: use post-decrement in error handling
drm/amdgpu: fix issue with overlapping userptrs
drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2)
drm/amdgpu: remove unnecessary forward declaration
drm/amdgpu: fix s4 resume
drm/amdgpu: remove exp hardware support from iceland
drm/amdgpu: don't load MEC2 on topaz
drm/amdgpu: drop topaz support from gmc8 module
drm/amdgpu: pull topaz gmc bits into gmc_v7
drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above
drm/amdgpu: iceland use CI based MC IP
drm/amdgpu: move gmc7 support out of CIK dependency
drm/amdgpu: no need to load MC firmware on fiji
drm/amdgpu: fix amdgpu_bo_pin_restricted VRAM placing v2
drm/amdgpu: fix tonga smu resume
drm/amdgpu: fix lost sync_to if scheduler is enabled.
drm/amdgpu: call hpd_irq_event on resume
drm/amdgpu: Fix off-by-one errors in amdgpu_vm_bo_map
drm/vmwgfx: respect 'nomodeset'
drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates
drm/vmwgfx: Fix an incorrect lock check
virtio_pci: fix use after free on release
virtio_balloon: fix race between migration and ballooning
virtio_balloon: fix race by fill and leak
regulator: mt6311: MT6311_REGULATOR needs to select REGMAP_I2C
regulator: axp20x: Fix GPIO LDO enable value for AXP22x
clk: exynos: use irqsave version of spin_lock to avoid deadlock with irqs
cxl: use correct operator when writing pcie config space values
sparc64: fix incorrect sign extension in sys_sparc64_personality
EDAC, mc_sysfs: Fix freeing bus' name
EDAC: Robustify workqueues destruction
MIPS: Fix buffer overflow in syscall_get_arguments()
MIPS: Fix some missing CONFIG_CPU_MIPSR6 #ifdefs
MIPS: hpet: Choose a safe value for the ETIME check
MIPS: Loongson-3: Fix SMP_ASK_C0COUNT IPI handler
Revert "MIPS: Fix PAGE_MASK definition"
cputime: Prevent 32bit overflow in time[val|spec]_to_cputime()
time: Avoid signed overflow in timekeeping_get_ns()
Bluetooth: 6lowpan: Fix handling of uncompressed IPv6 packets
Bluetooth: 6lowpan: Fix kernel NULL pointer dereferences
Bluetooth: Fix incorrect removing of IRKs
Bluetooth: Add support of Toshiba Broadcom based devices
Bluetooth: Use continuous scanning when creating LE connections
Drivers: hv: vmbus: Fix a Host signaling bug
tools: hv: vss: fix the write()'s argument: error -> vss_msg
mmc: sdhci: Allow override of get_cd() called from sdhci_request()
mmc: sdhci: Allow override of mmc host operations
mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
mmc: pxamci: fix again read-only gpio detection polarity
mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL
mmc: mmci: fix an ages old detection error
mmc: core: Enable tuning according to the actual timing
mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off()
mmc: mmc: Fix incorrect use of driver strength switching HS200 and HS400
mmc: sdio: Fix invalid vdd in voltage switch power cycle
mmc: sdhci: Fix DMA descriptor with zero data length
mmc: sdhci-pci: Do not default to 33 Ohm driver strength for Intel SPT
mmc: usdhi6rol0: handle NULL data in timeout
clockevents/tcb_clksrc: Prevent disabling an already disabled clock
posix-clock: Fix return code on the poll method's error path
irqchip/gic-v3-its: Fix double ICC_EOIR write for LPI in EOImode==1
irqchip/atmel-aic: Fix wrong bit operation for IRQ priority
irqchip/mxs: Add missing set_handle_irq()
irqchip/omap-intc: Add support for spurious irq handling
coresight: checking for NULL string in coresight_name_match()
dm: fix dm_rq_target_io leak on faults with .request_fn DM w/ blk-mq paths
dm snapshot: fix hung bios when copy error occurs
dm space map metadata: remove unused variable in brb_pop()
tda1004x: only update the frontend properties if locked
vb2: fix a regression in poll() behavior for output,streams
gspca: ov534/topro: prevent a division by 0
si2157: return -EINVAL if firmware blob is too big
media: dvb-core: Don't force CAN_INVERSION_AUTO in oneshot mode
rc: sunxi-cir: Initialize the spinlock properly
namei: ->d_inode of a pinned dentry is stable only for positives
mei: validate request value in client notify request ioctl
mei: fix fasync return value on error
rtlwifi: rtl8723be: Fix module parameter initialization
rtlwifi: rtl8188ee: Fix module parameter initialization
rtlwifi: rtl8192se: Fix module parameter initialization
rtlwifi: rtl8723ae: Fix initialization of module parameters
rtlwifi: rtl8192de: Fix incorrect module parameter descriptions
rtlwifi: rtl8192ce: Fix handling of module parameters
rtlwifi: rtl8192cu: Add missing parameter setup
rtlwifi: rtl_pci: Fix kernel panic
locks: fix unlock when fcntl_setlk races with a close
um: link with -lpthread
uml: fix hostfs mknod()
uml: flush stdout before forking
s390/fpu: signals vs. floating point control register
s390/compat: correct restore of high gprs on signal return
s390/dasd: fix performance drop
s390/dasd: fix refcount for PAV reassignment
s390/dasd: prevent incorrect length error under z/VM after PAV changes
s390: fix normalization bug in exception table sorting
btrfs: initialize the seq counter in struct btrfs_device
Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots
Btrfs: fix transaction handle leak on failure to create hard link
Btrfs: fix number of transaction units required to create symlink
Btrfs: send, don't BUG_ON() when an empty symlink is found
btrfs: statfs: report zero available if metadata are exhausted
Btrfs: igrab inode in writepage
Btrfs: add missing brelse when superblock checksum fails
KVM: s390: fix memory overwrites when vx is disabled
s390/kvm: remove dependency on struct save_area definition
clocksource/drivers/vt8500: Increase the minimum delta
genirq: Validate action before dereferencing it in handle_irq_event_percpu()
mm: numa: quickly fail allocations for NUMA balancing on full nodes
mm: thp: fix SMP race condition between THP page fault and MADV_DONTNEED
ocfs2: unlock inode if deleting inode from orphan fails
drm/i915: shut up gen8+ SDE irq dmesg noise
iw_cxgb3: Fix incorrectly returning error on success
spi: omap2-mcspi: Prevent duplicate gpio_request
drivers: android: correct the size of struct binder_uintptr_t for BC_DEAD_BINDER_DONE
USB: option: add "4G LTE usb-modem U901"
USB: option: add support for SIM7100E
USB: cp210x: add IDs for GE B650V3 and B850V3 boards
usb: dwc3: Fix assignment of EP transfer resources
can: ems_usb: Fix possible tx overflow
dm thin: fix race condition when destroying thin pool workqueue
bcache: Change refill_dirty() to always scan entire disk if necessary
bcache: prevent crash on changing writeback_running
bcache: allows use of register in udev to avoid "device_busy" error.
bcache: unregister reboot notifier if bcache fails to unregister device
bcache: fix a leak in bch_cached_dev_run()
bcache: clear BCACHE_DEV_UNLINK_DONE flag when attaching a backing device
bcache: Add a cond_resched() call to gc
bcache: fix a livelock when we cause a huge number of cache misses
lib/ucs2_string: Correct ucs2 -> utf8 conversion
efi: Add pstore variables to the deletion whitelist
efi: Make efivarfs entries immutable by default
efi: Make our variable validation list include the guid
efi: Do variable name validation tests in utf8
efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version
lib/ucs2_string: Add ucs2 -> utf8 helper functions
ARM: 8457/1: psci-smp is built only for SMP
drm/gma500: Use correct unref in the gem bo create function
devm_memremap: Fix error value when memremap failed
KVM: s390: fix guest fprs memory leak
arm64: errata: Add -mpc-relative-literal-loads to build flags
ARM: debug-ll: fix BCM63xx entry for multiplatform
ext4: fix bh->b_state corruption
sctp: Fix port hash table size computation
unix_diag: fix incorrect sign extension in unix_lookup_by_ino
tipc: unlock in error path
rtnl: RTM_GETNETCONF: fix wrong return value
IFF_NO_QUEUE: Fix for drivers not calling ether_setup()
tcp/dccp: fix another race at listener dismantle
route: check and remove route cache when we get route
net_sched fix: reclassification needs to consider ether protocol changes
pppoe: fix reference counting in PPPoE proxy
l2tp: Fix error creating L2TP tunnels
net/mlx4_en: Avoid changing dev->features directly in run-time
net/mlx4_en: Choose time-stamping shift value according to HW frequency
net/mlx4_en: Count HW buffer overrun only once
qmi_wwan: add "4G LTE usb-modem U901"
tcp: md5: release request socket instead of listener
tipc: fix premature addition of node to lookup table
af_unix: Guard against other == sk in unix_dgram_sendmsg
af_unix: Don't set err in unix_stream_read_generic unless there was an error
ipv4: fix memory leaks in ip_cmsg_send() callers
bonding: Fix ARP monitor validation
bpf: fix branch offset adjustment on backjumps after patching ctx expansion
flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlen
net: Copy inner L3 and L4 headers as unaligned on GRE TEB
sctp: translate network order to host order when users get a hmacid
enic: increment devcmd2 result ring in case of timeout
tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs
net:Add sysctl_max_skb_frags
tcp: do not drop syn_recv on all icmp reports
unix: correctly track in-flight fds in sending process user_struct
ipv6: fix a lockdep splat
ipv6: addrconf: Fix recursive spin lock call
ipv6/udp: use sticky pktinfo egress ifindex on connect()
ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail()
tcp: beware of alignments in tcp_get_info()
switchdev: Require RTNL mutex to be held when sending FDB notifications
inet: frag: Always orphan skbs inside ip_defrag()
tipc: fix connection abort during subscription cancel
net: dsa: fix mv88e6xxx switches
sctp: allow setting SCTP_SACK_IMMEDIATELY by the application
pptp: fix illegal memory access caused by multiple bind()s
af_unix: fix struct pid memory leak
tcp: fix NULL deref in tcp_v4_send_ack()
lwt: fix rx checksum setting for lwt devices tunneling over ipv6
tunnels: Allow IPv6 UDP checksums to be correctly controlled.
net: dp83640: Fix tx timestamp overflow handling.
gro: Make GRO aware of lightweight tunnels.
af_iucv: Validate socket address length in iucv_sock_bind()
Conflicts:
arch/arm64/Makefile
arch/arm64/include/asm/cacheflush.h
drivers/mmc/host/sdhci.c
drivers/usb/dwc3/ep0.c
drivers/usb/dwc3/gadget.c
kernel/module.c
sound/core/pcm_compat.c
CRs-Fixed: 1010239
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Change-Id: I41a28636fc9ad91f9d979b191784609476294cdf
|
|
In wil_p2p_listen chan is checked to protect against NULL
pointer access only before setting channel = chan->hw_value.
Add a global parameter check to cover all accesses to chan.
Change-Id: Ib975c99b3b87998c357251a37f4862cbbf68697d
CRs-Fixed: 1026286
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Add a module parameter alt_ifname that when set, will name
the primary network interface wigig<N> instead of the default
wlan<N>. This helps platforms such as android where we need to
clearly separate the WIGIG interface from the default wireless
interface.
Change-Id: Ie1cd3ccf777e84665075bc3b6d9fffa7d897de49
CRs-Fixed: 982931
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
The nl80211 layer expects P2P search operation to be aborted
if needed when stopping P2P device. If the P2P search operation
is still running after returning from stop_p2p_device
it causes a WARN_ON and possibly a kernel crash.
Fix this by aborting the P2P search in wil_cfg80211_stop_p2p_device
and preventing P2P search from being started on a stopped P2P
device.
Note, the fix does not cover the case where a regular scan
is started on the P2P device. It will be completed in the
future when support is added for aborting a scan operation.
Change-Id: Ief940806df63f9836cfcab23b4ec3bb667fcd2c6
CRs-Fixed: 1026249
Signed-off-by: Lior David <liord@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Change the implementation of wil log functions for consistency
with __wil_dbg_ratelimited.
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 8fe2a5f9f9b5a2f26d9d31d350b2323aee13067a
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
CRs-Fixed: 1015627
[merez@coreaurora.org: fixed merge conflicts]
Change-Id: Ie7e073d672a561b768cb62f1e39af24c1d7c3322
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Adding pm_notify to allow the following:
1. Check if suspend is allowed in an earlier stage to prevent
starting the suspend procedure in case it is not allowed
2. Notify the platform driver on the suspend request
Change-Id: Iddacd9b54304b47263647942e1e6784eefb9a6d2
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: e34dc6475a7b25d1aec5de8652a321672904c686
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
CRs-Fixed: 1015627
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
In case we fail to map one of the TSO SKB fragments, we need to
clear all the mapped descriptors, from swhead to swhead+descs_used-1.
Change the desc index calculation to
i = (swhead + descs_used - 1) % vring->size;
to prevent unmpping of (swhead + descs_used) descriptor that wasn't
mapped.
Change-Id: I81b99522ada809fa375c6b6887f8ea0e6482fba3
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: a1526f7eafa434f756579e2bc784b7605f96bf3e
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
CRs-Fixed: 1015627
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
napi_synchronize is called before releasing the vring, with the
assumption that setting txdata->enabled to 0 will prevent handling
of this vring in the next scheduled napi.
To guarantee this assumption, a memory barrier is added after disabling
the txdata.
In addition, as the ctx is zeroed in wil_tx_complete after this
descriptor is handled (protected by wmb), ctx needs to be checked
before releasing this descriptor in wil_vring_free.
Change-Id: I7af20f1db39b7e4c5ac2956fc655f120eb61e002
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 34b8886e502a62d1355ccc0420044aa2749a24cd
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
CRs-Fixed: 1015627
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
add memory barrier after allocating new rx descriptors, before
updating the hwtail.
This will guarantee that all writes to descriptors (shared memory)
are done before committing them to HW.
Change-Id: If7c91c31b490b0762d23df21db7c30652b0817d4
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: ab6d7cc3eab4093caf91ba8b27590c4080d7d01c
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
CRs-Fixed: 1015627
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
There are 2 possible race conditions, both are solved by addition of
memory barrier:
1. wil_tx_complete reads the swhead to determine if the vring is
empty. In case the swhead was updated before the descriptor update
was performed in __wil_tx_vring/__wil_tx_vring_tso, the completion
loop will not end and as the DU bit may still be set from a previous
run, this skb can be handled as completed before it was sent, which
will lead to double free of the same SKB.
2. __wil_tx_vring/__wil_tx_vring_tso calculate the number of available
descriptors according to the swtail. In case the swtail is updated
before memset of ctx to zero is completed, we can handle this
descriptor while later on ctx is zeroed.
Change-Id: Ia6584de897c366032251033aa8e03c54e9d899bb
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: eb26cff148f5449972121e46e403f549d71f6f49
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
CRs-Fixed: 1015627
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Add the ability to configure the device led to be used for notifying
the AP activity (60G device supports leds 0-2).
The host can also configure the blinking frequency of the led in
three states.
Change-Id: I3b7770b0cbaec634ca566a82ccc648b6835d75a0
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
git-commit: 10d599ad84a1b98450c8867ce548ea4bf0f6df1a
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
CRs-Fixed: 1015627
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
In idle times 60G device can enter deep sleep and turn off
its XTAL clock.
Host access triggers the device power-up flow which will hold
the AHB during XTAL stabilization until device switches from
slow-clock to XTAL clock.
This behavior can stall the PCIe bus for some arbitrary period
of time.
In order to prevent this stall, host can vote for High Latency
Access Policy (HALP) before reading from PCIe bus.
This vote will wakeup the device from deep sleep and prevent
deep sleep until unvote is done.
Change-Id: Ic6bbe8b2aee53d019013159cd21597c2fa0f298f
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
git-commit: 349214c1e7d718684e19dc3559dffe4e62f55296
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
CRs-Fixed: 1015627
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
RX_HTRSH interrupt sometimes triggered during device reset
procedure.
To prevent handling this interrupt when not required, unmask
this interrupt only if we are connected and mask it when
disconnected.
Change-Id: I9fa0e28d91d0962fc7f05b2cf92c99c2431a2295
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 54eaa8c69e72dca4c824cd390b616cb48b2c4e30
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
CRs-Fixed: 1015627
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Network stack can try to transmit data while AP / STA is
disconnected.
Change this print-out to debug level as this should not be
handled as error.
This patch also adds wil_dbg_ratelimited, used to limit the
above print-out.
Change-Id: I41eecc91730c60a1851969f8fecf7c201b8b2050
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: d8ed043accdee611bce8be7c4224b4e26bdc2ab5
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
CRs-Fixed: 1015627
Signed-off-by: Maya Erez <merez@codeaurora.org>
[merez@codeaurora.org: fixed merge conflicts]
|
|
When using interrupt moderation RX_HTRSH interrupt can occur
frequently during high throughput and should not be considered
as error.
Such print-outs can degrade the performance hence should be printed
in debug print level.
Change-Id: I570b66886edf949c3d77027d0dc8baf820c5cf0f
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: b523d35b5bffda70bf149cb6ae87c7eb1013dcdd
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
CRs-Fixed: 1015627
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
P2P search can only run on the social channel (channel 2).
When issuing a scan request on the P2P_DEVICE interface,
driver ignored the channels argument and always performed a P2P
search.
Fix this by checking the channels argument, if it is
not specified (meaning full scan) or if a non-social channel
was specified, perform a regular scan and not a P2P search.
Change-Id: If1cdfdb2086ff7e3dbf02e9a5920ef3ed0a31280
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 321a000bfadd5535089a198b42d714a8bf8469b7
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
CRs-Fixed: 1015627
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Add __func__ to wil_err and wil_info for easier
debugging.
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 290206fa7e04ea4c1620aea2624e4d998bc27a0a
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
CRs-Fixed: 1015627
Signed-off-by: Maya Erez <merez@codeaurora.org>
[merez@codeaurora.org: fixed merge conflicts]
Change-Id: Ib7ff8f1debd6873069df42efd7d832db64701258
|
|
Retain API's in cnss_common.h file for cnss use only. cnss.h is to
be used to expose the EXPORT_SYMBOL API's.
CRs-Fixed: 1009898
Change-Id: I2b9eb81552f4803c3accd0221ea891697a9a93bc
Signed-off-by: Komal Kumar <kseelam@codeaurora.org>
|
|
There are many valid WMI commands with only header without any
additional payload. Such WMI commands could not be sent using
the debugfs wmi_send facility. Fix the code to allow sending
of such commands.
Change-Id: I581e099db5d2ee81be4345101aa54352b1d9564f
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 69218a48005d0c93b8e9ec483f42ead481a43034
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
CRs-Fixed: 1015627
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
For dual WiFi both cnss sdio and pcie platform needs to
be enabled. Added changes below to support dual platform
driver for dual WiFi.
Refactor the common api and data structure to avoid namespace
collision compilation error. Refactor sdio and pcie bus specific
kernel api and removed conditional compilation config flag.
The platform driver at run time identifies the wlan bus type
from the PHY device pointer passed by the wlan driver through
vos api and cnss platform driver redirects the cnss api according
the bus type.
Remove conditional compilation flag from cnss common api and
update cnss makefile for dual platform driver compilation
with single config flag.
CRs-Fixed: 988871
Change-Id: I8205c2979c857c2f3845ba2dc397d2f9dd1afa3b
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org>
|
|
The cnss subsystem restart and pm qos export API has been
refactor in respective platform driver according to the bus
type SDIO/PCIe.
Remove redundant and dead code from platform driver to avoid
the namespace collision compilation error. Refactor the recovery
work handler according to bus type. This feature adds support for
dual cnss platform driver support for dual WiFi.
CRs-Fixed: 987560
Change-Id: I0e1b5ff0e9970a40ad9d0619dcb7f8cbae241656
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
|
|
Add cnss sdio platform driver support to vote for bus bandwidth
as per throughput requirement from wlan driver. The cnss sdio
platform driver export bus bandwidth api for wlan host driver.
CRs-Fixed: 990173
Change-Id: Ied2e5a78487b6f6076cd19f32c959a69050e055c
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
|
|
Add module parameter oob_mode. Takes effect the next time
the interface is brought up and FW is loaded. Puts the FW
in special "out of the box" (OOB) mode which is used for
diagnostics and certification.
Change-Id: I561e4ab26c8ac74d6fbcf19492b01751033b64d9
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 1f1a361abf73edfb94ca010c51587de378bc7c68
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982931
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
When starting a PCP, pass the is_go flag to firmware in
wmi_pcp_start. This flag indicates whether we started
a PCP which is also a GO(P2P group owner) or just a regular
PCP.
Change-Id: I619abba9ef6e6fda3ea5fecd5ee87652b8ef37a5
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: b4944f2c081ea0e2fa7bc8bb510e1e6e5667f30b
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982931
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
When FW crashed with no_fw_recovery mode enabled, user space
could still call wil_cfg80211_change_iface quickly to change
interface type, and this would cause recovery to proceed and
FW crash logs may be lost.
Fix this problem by not resetting the FW in case no_fw_recovery
is enabled.
Change-Id: I139a5e846555e30666f96675400c6db6e1999e05
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
git-commit: 375a173fc1524eb569c7e8f9cf331126a9d29033
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982931
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Fix a debug message related to IOCTL that was incorrectly logged
with the MISC category, and move it inside wil_ioctl so it will
always be logged even if we call wil_ioctl from other places.
Change-Id: I3cf69b18f195e5db01a1f5832013342c9f481286
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 6777e71ca91ea488488362a919900488e0ade3f2
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982931
[merez@codeaurora.org: fixed conflict due to android private ioctl]
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Fix 2 race conditions found during test runs of P2P discovery:
1. Because wil_p2p_cancel_listen was not protected, user space
could start a new P2P listen/search before wmi_stop_discovery
completed. This caused a crash in the firmware.
2. In P2P listen, when listen timer expires and user space calls
cancel_remain_on_channel at the same time, code could send the
cfg80211_remain_on_channel_expired notification twice.
Added protections with wil->mutex to several places that call
wmi_stop_discovery.
Change-Id: I692113c222f278d6c4d4c282b4df0e28b0933556
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 280ab987ef21d1c196acb3af4663a99f94d9da00
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982931
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Added support for the P2P_DEVICE virtual interface. This interface
is intended for P2P management operations such as discovery and
GO negotiation. Normally it is implemented by drivers to allow
a separate interface for P2P management with its own MAC address,
but for 11ad drivers it is needed to support P2P search, since it
cannot otherwise be separated from normal scan.
Since we only support a single interface/MAC address, we can't
easily separate between primary and P2P_DEVICE interfaces.
For example when a management packet arrives we can't tell for
which interface it is intended. To work around this, we store
a pointer to the interface where the last "radio operation" was
triggered such as scan or remain on channel, and we forward
management packets and scan results to this interface.
Change-Id: Ief04b007c0507f9240d8f0b02b98fe7712213a0e
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 4332cac17b5c0cb80d8b99fda33a0faad3238b0e
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982931
[merez@codeaurora.org: conflict in wil_cfg80211_add_iface definition]
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
supporting p2p_find, p2p_listen and p2p_connect
Use updated cfg80211_get_bss API (additional argument)
Change-Id: I847ccd10da574bdc83c7eec8c8315c4e0d207d8b
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: e6d68341e7286386451adf14cebb635a52b0effe
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982931
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Change the feature flag to compile rndis_ipa
on cobalt target with msm-4.4 kernel, also
fix the compile warnings.
Change-Id: I82d3dd00e003d8eab63ca6bcc3bb91d51f122606
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
|
|
PBSS (Personal Basic Service Set) is a new BSS type for DMG
networks. It is similar to infrastructure BSS, having an AP-like
entity called PCP (PBSS Control Point), but it has few differences.
For example, stations inside a PBSS can communicate directly, and
the PCP role can be transferred between stations.
This change adds PBSS support, and has 2 main parts:
1. When starting an AP, add an option to start as a PCP instead.
This is implemented by a new PBSS flag which is passed as part of
the cfg80211_ap_settings structure.
2. When connecting to a BSS, add an option to connect to a PCP
instead of an AP. This is again implemented by a new PBSS flag,
added to the cfg80211_connect_params structure.
Change-Id: Ibfcbeb2df9857fecab4d42f0725d70d2a2fa4b98
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: eabb03b4a37cc7945ca62453402c74a0622e5a05
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982931
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
In previous commit cd958296acba
("wil6210: enable WA for PCIe HW errata")
relaxed ordering (bit 5) was set, in addition
to the 'No snoop" setting.
Enabling relaxed ordering can cause a race condition
between the write transactions and interrupts when
using INT instead of MSI.
As relaxed ordering is not required to resolve the
PCIe HW issue, it should be disabled.
CRs-Fixed: 998870
Change-Id: I53113d6454de577d4e68f226975a078889d6b2c3
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
PBSS (Personal Basic Service Set) is a new BSS type for DMG
networks. It is similar to infrastructure BSS, having an AP-like
entity called PCP (PBSS Control Point), but it has few differences.
PBSS support is mandatory for 11ad devices.
Add support for PBSS by introducing a new PBSS flag attribute.
The PBSS flag is used in the START_AP command to request starting
a PCP instead of an AP, and in the CONNECT command to request
connecting to a PCP instead of an AP.
Change-Id: I9f26a8ff8433268240eb9443befadc0d279a0293
[liord@codeaurora.org: added missing attributes to nl80211.h
that were added in upstream kernel before the PBSS attribute,
in order to keep the ABI compatible]
Signed-off-by: Lior David <liord@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Git-commit: 00807f28573a101dc2833f0075e806b9874f306c
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982931
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Switch to auto-generated version of wmi.h which is maintained
by FW team. This will allow better sync between teams in the
future and avoid bugs because of unexpected API changes.
The wmi.h will have many differences but most are cosmetic.
It also includes these real differences:
1. is_go parameter added to BCON_CTRL and START_PCP commands.
2. max_rx_pl_per_desc added to CFG_RX_CHAIN command.
3. various small API updates that are not currently used by
driver.
Change-Id: I20921a97b02dce0507f58c4951ce539a2aae5597
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: b874ddecae0a087aee024ef808c63060434a2d50
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 987415
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Add support for discovery mode during scan. When discovery mode
is active, station transmits special beacons while scanning.
This can optimize the scan mainly when there is only one AP/PCP
around.
Discovery mode is implicitly used by firmware during P2P search.
Since there is currently no use case where user space has a
reason to directly control discovery mode, we expose it only
through a debugfs flag.
Also fix name confusion in the wmi_scan_type enumeration.
The type previously called WMI_LONG_SCAN is actually
WMI_ACTIVE_SCAN.
Change-Id: I05b99ec66b0da41697f41c547aab0b0497dd9be6
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 74997a53d257e327699e359b78b3ecfd33f80cab
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982931
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Check PN for encrypted frames.
Maintain PN data for Rx keys, pairwise per TID and group.
Print PN's in the debugfs "stations" entry, like:
[0] 04:ce:14:0a:3c:3d connected
[ 0] ([32] 0 TU) 0x0fe [____________________________|___] total 252 drop 0 (dup 0 + old 0) last 0x000
[ 0] PN [0+]000000000000 [1-]000000000000 [2-]000000000000 [3-]000000000000
[GR] PN [0-]000000000000 [1+]000000000000 [2+]000000000000 [3-]000000000000
Rx invalid frame: non-data 0, short 0, large 0, replay 0
Rx/MCS: 0 110 65 65 65 0 12 0 0 0 0 0 0
[1] 00:00:00:00:00:00 unused
[2] 00:00:00:00:00:00 unused
[3] 00:00:00:00:00:00 unused
[4] 00:00:00:00:00:00 unused
[5] 00:00:00:00:00:00 unused
[6] 00:00:00:00:00:00 unused
[7] 00:00:00:00:00:00 unused
Change-Id: Ie6684664743694f004289da9ec041f685ec0c05e
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 58527421489dcc1110f6bcfd3b50d479199af4e0
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 987415
[merez@codeaurora.org: add missing IEEE80211_GCMP_PN_LEN definition]
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
MAC address of wil6210 was not set in wiphy
Change-Id: I5018f40be6a71b4b8c7c3ee94c8e70cfa1fb373a
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: b42f11963f7bd8c54d0a28d679c13d9e83b85357
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 987415
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
wmi_evt_connect doesn't check if the connect event is received for
an already connected station.
This can lead to memory leak as a new vring is allocated without
freeing the previously allocated vring and to unexpected behavior
of nl80211 layer due to unexpected notification of a new station.
Add a check in wmi_evt_connect in AP mode to verify that the requested
CID is not associated to an already connected station.
Change-Id: I0e438d437154b1b47c572218072a736da5013c80
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 3d287fb398c03189a1394778162f6404e4d44ad2
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982882
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
WMI synchronous handling has changed and WMI calls that provide
a buffer for the reply are completed in the WMI interrupt context.
This allows sending the RX and TX BACK commands from the WMI event
handler without the need for the worker thread.
This is a better approach as it can decrease the handshake time
in the connect flow and prevent race conditions in case of fast
disconnects. An example for such a race is handling of wil_back_rx_handle
during a disconnect event, as wil_back_rx_handle is not protected by
the wil mutex and a disconnect can be handled after sta->status is
verified as connected.
Change-Id: I7d6e3cf5e8abab45da5febc0129fb67830d9e6cb
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 361486b27c7e57dab657dbffd1e17818c7911c72
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982882
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Add the ability to notify the platform driver on different
events, such as FW crash, pre reset and FW ready.
Change-Id: I796b06fae4376cda792d7f26a430ad4580899846
CRs-Fixed: 986135
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Tx vring needs to be enlarged to get better
performance for traffic over 2Gbps.
Change-Id: Ia78ddf6f5243a8d28c3bfdfc29e0eb512658d0a7
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: ee5dfe0d240e21afe63bdd77bf1d4a386203aa6e
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982882
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
In case there are multiple WMI commands with the same reply_id,
the following scenario can occur:
- Driver sends the first command to the device
- The reply didn’t get on time and there is timeout
- Reply_id, reply_buf and reply_size are set to 0
- Driver sends second wmi command with the same reply_id as the first
- Driver sets wil->reply_id
- Reply for the first wmi command arrives and handled by wmi_recv_cmd
- As its ID fits the reply_id but the reply_buf is not set yet it is
handled as a reply with event handler, and WARN_ON is printed
This patch guarantee atomic setting of all the reply variables and
prevents the above scenario.
Change-Id: I7eac78d7beb90436d24468547aeb789f7c8ec878
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: fe5c271e2878fb080f1b32fec5b4e3f7a6070152
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982882
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
cfg80211_ops.disconnect() should wait for disconnect flow to
complete. If it does not, internal state becomes out of sync with
one in cfg80211. If one does stress test connect/disconnect
sequence, cfg80211 will issue next connect before disconnect
completed internally.
Change-Id: I66a6a23239710c85b9cdb5824c205692c4b53866
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 78771d76f826202012201d700028a2d866d03fb3
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982882
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
wil_tx_vring locks the vring_tx_data lock before accessing the TX
vring to check if it is enabled and valid for use.
In case of quick disconnect / connect events for the same station,
spin_lock(&txdata->lock) can be called during the lock initialization
in the vring init function.
To prevent such a race, the TX vrings spin lock should be initialized
once during wil6210 driver initialization.
Change-Id: I11fa67f7040c4a728f0cd7633f4fbb829ac165d0
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
git-commit: 875e94392ad2be9776c8325d3573160eb1455a2b
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982882
Signed-off-by: Maya Erez <merez@codeaurora.org>
|
|
Initialize PinCtrl Framework for SDIO platforms to support antenna
sharing.
The antenna sharing is enabled only for platform which has PCIe QCA
and SDIO QCA chipsets.
CRs-Fixed: 990796
Change-Id: Ib3da0ce52ef46deae2ba49e4f39808effe18457d
Signed-off-by: Komal Kumar <kseelam@codeaurora.org>
|
|
Add common api support of subsystem restart and bus
bandwidth for dual wifi. This feature redirect the cnss
export api according to the bus type SDIO/PCI.
CRs-Fixed: 986275
Change-Id: Iaf13d6c6d68ef62b7e4f6581899ec8325c5e9696
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
|