summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2012-11-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-11-16tilegx: request_irq with a non-null device nameSimon Marchi
This patch simply makes the tilegx net driver call request_irq with a non-null name. It makes the output in /proc/interrupts more obvious, but also helps tools that don't expect to find null there. Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14Revert "drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before ↵David S. Miller
mdiobus_free" This reverts commit aa731872f7d33dcb8b54dad0cfb82d4e4d195d7e. As pointed out by Ben Hutchings, this change is not correct. mdiobus_unregister() can't be called if the bus isn't registered yet, however this change can result in situations which cause that to happen. Part of the confusion here revolves around the fact that the callers of this module control registration/unregistration, rather than the module itself. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14net/smsc911x: Fix ready check in cases where WORD_SWAP is neededKamlakant Patel
The chip ready check added by the commit 3ac3546e [Always wait for the chip to be ready] does not work when the register read/write is word swapped. This check has been added before the WORD_SWAP register is programmed, so we need to check for swapped register value as well. Bit 16 is marked as RESERVED in SMSC datasheet, Steve Glendinning <steve@shawell.net> checked with SMSC and wrote: The chip architects have concluded we should be reading PMT_CTRL until we see any of bits 0, 8, 16 or 24 set. Then we should read BYTE_TEST to check the byte order is correct (as we already do). The rationale behind this is that some of the chip variants have word order swapping features too, so the READY bit could actually be in any of the 4 possible locations. The architects have confirmed that if any of these 4 positions is set the chip is ready. The other 3 locations will either never be set or can only go high after READY does (so also indicate the device is ready). This change will check for the READY bit at the 16th position. We do not check the other two cases (bit 8 and 24) since the driver does not support byte-swapped register read/write. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14drivers/net: fix tasklet misuse issueXiaotian Feng
In commit 175c0dff, drivers uses tasklet_kill to avoid put disabled tasklet on the tasklet vec. But some of the drivers uses tasklet_init & tasklet_disable in the driver init code, then tasklet_enable when it is opened. This makes tasklet_enable on a killed tasklet and make ksoftirqd crazy then. Normally, drivers should use tasklet_init/tasklet_kill on device open/remove, and use tasklet_disable/tasklet_enable on device suspend/resume. Reported-by: Peter Wu <lekensteyn@gmail.com> Tested-by: Peter Wu <lekensteyn@gmail.com> Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14brcmfmac: fix typo in CONFIG_BRCMISCANHauke Mehrtens
The old ifdef CONFIG_BRCMFISCAN looks wrong to me and it makes more sense when CONFIG_BRCMISCAN is used. This patch was just compile tested by me, but not runtime tested. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-14Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2012-11-13vxlan: Update hard_header_len based on lowerdev when instantiating VXLANAlexander Duyck
In the event of a VXLAN device being linked to a device that has a hard_header_len greater than that of standard ethernet we could end up with the hard_header_len not being large enough for outgoing frames. In order to prevent this we should update the length when a lowerdev is provided. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13vxlan: fix a typo.Rami Rosen
Use eXtensible and not eXtensiable in the comment on top. Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13vxlan: Fix error that was resulting in VXLAN MTU size being 10 bytes too largeAlexander Duyck
This change fixes an issue I found where VXLAN frames were fragmented when they were up to the VXLAN MTU size. I root caused the issue to the fact that the headroom was 4 + 20 + 8 + 8. This math doesn't appear to be correct because we are not inserting a VLAN header, but instead a 2nd Ethernet header. As such the math for the overhead should be 20 + 8 + 8 + 14 to account for the extra headers that are inserted for VXLAN. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13net: cdc_ncm: add Huawei devicesBjørn Mork
A number of Huawei 3G and LTE modems implement a CDC NCM function, including the necessary functional descriptors, but using a non standard interface layout and class/subclass/protocol codes. These devices can be handled by this driver with only a minor change to the probing logic, allowing a single combined control and data interface. This works because the devices - include a CDC Union descriptor labelling the combined interface as both master and slave, and - have an alternate setting #1 for the bulk endpoints on the combined interface. The 3G/LTE network connection is managed by vendor specific AT commands on a serial function in the same composite device. Handling the managment function is out of the scope of this driver. It will be handled by an appropriate USB serial driver. Reported-and-Tested-by: Olof Ermis <olof.ermis@gmail.com> Reported-and-Tested-by: Tommy Cheng <tommy7765@yahoo.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13smsc95xx: set MII_BUSY bit to read/write PHY regsSteve Glendinning
The device datasheet specifies the BUSY bit must be set when reading or writing phy registers. This patch ensures we do that. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-09gianfar: ethernet vanishes after restoring from hibernationWang Dongsheng
If a gianfar ethernet device is down prior to hibernating a system, it will no longer be present upon system restore. For example: ~# ifconfig eth0 down ~# echo disk > /sys/power/state <trigger a restore from hibernation> ~# ifconfig eth0 up SIOCSIFFLAGS: No such device This happens because the restore function bails out early upon finding devices that were not up at hibernation. In doing so, it never gets to the netif_device_attach call at the end of the restore function. Adding the netif_device_attach as done here also makes the gfar_restore code consistent with what is done in the gfar_resume code. Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-09usbnet: ratelimit kevent may have been dropped warningsSteve Glendinning
when something goes wrong, a flood of these messages can be generated by usbnet (thousands per second). This doesn't generally *help* the condition so this patch ratelimits the rate of their generation. There's an underlying problem in usbnet's kevent deferral mechanism which needs fixing, specifically that events *can* get dropped and not handled. This patch doesn't address this, but just mitigates fallout caused by the current implemention. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: usb: cdc_eem: Fix rx skb allocation for 802.1Q VLANsIan Coolidge
cdc_eem frames might need to contain 802.1Q VLAN Ethernet frames. URB/skb sizing from usbnet will default to the hard_mtu, so account for the VLAN header by expanding that via hard_header_len Signed-off-by: Ian Coolidge <iancoolidge@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07cxgb4: Fix initialization of SGE_CONTROL registerVipul Pandya
INGPADBOUNDARY_MASK is already shifted. No need to shift it again. On reloading a driver it was resulting in a bad SGE FL MTU sizes [1536, 9088] error. This only causes an issue on systems that have L1 cache size of 32B, 128B, 512B, 2048B or 4096B. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07cxgb4: Initialize data structures before using.Vipul Pandya
We should not assume reserve fields to be don't cares as fields may change. Clearing data structures before using. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07iwlwifi: use ieee80211_free_txskbJohannes Berg
To let mac80211 clean up any TX information when a frame is dropped, use ieee80211_free_txskb(). Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05iwlwifi: handle DMA mapping failuresJohannes Berg
The RX replenish code doesn't handle DMA mapping failures, which will cause issues if there actually is a failure. This was reported by Shuah Khan who found a DMA mapping framework warning ("device driver failed to check map error"). Cc: stable@vger.kernel.org Reported-by: Shuah Khan <shuah.khan@hp.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-03net: bnx2x: Fix typo in bnx2x driverMasanari Iida
Correct spelling typo in bnx2x driver Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03smsc95xx: fix tx checksum offload for big endianSteve Glendinning
f7b2927 introduced tx checksum offload support for smsc95xx, and enabled it by default. This feature doesn't take endianness into account, so causes most tx to fail on those platforms. This patch fixes the problem fully by adding the missing conversion. An alternate workaround is to disable TX checksum offload on those platforms. The cpu impact of this feature is very low. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03r8169: allow multicast packets on sub-8168f chipset.Nathan Walp
RTL_GIGA_MAC_VER_35 includes no multicast hardware filter. Signed-off-by: Nathan Walp <faceprint@faceprint.com> Suggested-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03r8169: Fix WoL on RTL8168d/8111d.Cyril Brulebois
This regression was spotted between Debian squeeze and Debian wheezy kernels (respectively based on 2.6.32 and 3.2). More info about Wake-on-LAN issues with Realtek's 816x chipsets can be found in the following thread: http://marc.info/?t=132079219400004 Probable regression from d4ed95d796e5126bba51466dc07e287cebc8bd19; more chipsets are likely affected. Tested on top of a 3.2.23 kernel. Reported-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Tested-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Hinted-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Cyril Brulebois <kibi@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03drivers/net: use tasklet_kill in device remove/close processXiaotian Feng
Some driver uses tasklet_disable in device remove/close process, tasklet_disable will inc tasklet->count and return. If the tasklet is not handled yet because some softirq pressure, the tasklet will placed on the tasklet_vec, never have a chance to excute. This might lead to ksoftirqd heavy loaded, wakeup with pending_softirq, but tasklet is disabled. tasklet_kill should be used in this case. Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-02vmxnet3: must split too big fragmentsEric Dumazet
vmxnet3 has a 16Kbytes limit per tx descriptor, that happened to work as long as we provided PAGE_SIZE fragments. Our stack can now build larger fragments, so we need to split them to the 16kbytes boundary. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: jongman heo <jongman.heo@samsung.com> Tested-by: jongman heo <jongman.heo@samsung.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Reviewed-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-02cxgb4: Fix unable to get UP event from the LLDVipul Pandya
If T4 configuration file gets loaded from the /lib/firmware/cxgb4/ directory then offload capabilities of the cards were getting disabled during initialization. Hence ULDs do not get an UP event from the LLD. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-02drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_freePeter Senna Tschudin
Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // <smpl> @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-02drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_freePeter Senna Tschudin
Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // <smpl> @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Tested-by: Roland Stigge <stigge@antcom.de> Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-02bnx2x: fix HW initialization using fw 7.8.xDmitry Kravkov
Since commit 96bed4b9 (use FW 7.8.2) BRB HW block needs to be initialized using fw values for all devices. Otherwise ETS on 57712/578xx will not work. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bonding: fix second off-by-one errornikolay@redhat.com
Fix off-by-one error because IFNAMSIZ == 16 and when this code gets executed we stick a NULL byte where we should not. How to reproduce: with CONFIG_CC_STACKPROTECTOR=y (otherwise it may pass by silently) modprobe bonding; echo 1 > /sys/class/net/bond0/bonding/mode; echo "AAAAAAAAAAAAAAAA" > /sys/class/net/bond0/bonding/active_slave; Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Note: Sorry for the second patch but I missed this one while checking the file. You can squash them into one patch. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bonding: fix off-by-one errornikolay@redhat.com
Fix off-by-one error because IFNAMSIZ == 16 and when this code gets executed we stick a NULL byte where we should not. How to reproduce: with CONFIG_CC_STACKPROTECTOR=y (otherwise it may pass by silently) modprobe bonding; echo 1 > /sys/class/net/bond0/bonding/mode; echo "AAAAAAAAAAAAAAAA" > /sys/class/net/bond0/bonding/primary; Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Disable FCoE for 57840 since not yet supported by FWDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix no link on 577xx 10G-baseTYaniv Rosner
Since the Warpcore supports various link types, need to set only the correct supported modes for XFI which is the serdes interface for the 10G-baseT PHY. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix unrecognized SFP+ module after driver is loadedYaniv Rosner
When SFP+ module is plugged in after driver is already loaded, it may not be recognized, so set SFP module recognition time up to 300ms, without resetting the module power in the middle. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix potential incorrect link speed provisionYaniv Rosner
Fix possible incorrect link speed provision following rapid link speed change. Clear link speed mask after each link change, and not only after link down. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Restore global registers back to default.Yaniv Rosner
Several KR registers were not set correctly back to default after loopback test, so set those global registers over the global WC lane (zero) rather than the current lane. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix link down in 57712 following LFAYaniv Rosner
In case of link flap avoidance between PXE boot and bnx2x, set the appropriate PHY DEVAD even if LFA kicks in. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix 57810 1G-KR link against certain switches.Yaniv Rosner
Fix 1G KR link by restoring CL72 misc control register to default value rather than 0. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01ixgbe: PTP get_ts_info missing software supportJacob Keller
This patch corrects the ethtool get_ts_info functon which did not state that software timestamping was supported, even though it is. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> CC: Stable <stable@vger.kernel.org> [3.5] Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== This is a batch of fixes intended for 3.7... The biggest portion of this is a pull request from Johannes Berg: "Please pull my mac80211.git tree per below to get a number of fixes. I have included a patch from Antonio to fix a memcpy overrun, Felix's patches for the antenna gain/tx power issues, a few mesh-related fixes from Javier for mac80211 and my own patches to not access data that might not be present in an skb at all as well as a patch (the duplicate IE check one) to make mac80211 forward-compatible with potential future spec extensions that use the same IE multiple times. It's a bit bigger than I'd like maybe, but I think all of these are worthwhile fixes at this point." In addition... Felix Fietkau fixes an ath9k use-after-free issue. Stanislaw Gruszka adds a valid value check to rt2800. Sven Eckelmann adds a check to only check a TID value in a BlockAck, for frames that could be either a BlockAck or a normal Ack. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31vxlan: don't expire permanent entriesstephen hemminger
VXLAN confused flag versus bitmap on state. Based on part of a earlier patch by David Stevens. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-10-30ath9k: Test for TID only in BlockAcks while checking tx statusSven Eckelmann
The ath9k xmit functions for AMPDUs can send frames as non-aggregate in case only one frame is currently available. The client will then answer using a normal Ack instead of a BlockAck. This acknowledgement has no TID stored and therefore the hardware is not able to provide us the corresponding TID. The TID set by the hardware in the tx status descriptor has to be seen as undefined and not as a valid TID value for normal acknowledgements. Doing otherwise results in a massive amount of retransmissions and stalls of connections. Users may experience low bandwidth and complete connection stalls in environments with transfers using multiple TIDs. This regression was introduced in b11b160defc48e4daa283f785192ea3a23a51f8e ("ath9k: validate the TID in the tx status information"). Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Cc: stable@vger.kernel.org Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-30rt2800: validate step value for temperature compensationStanislaw Gruszka
Some hardware has correct (!= 0xff) value of tssi_bounds[4] in the EEPROM, but step is equal to 0xff. This results on ridiculous delta calculations and completely broke TX power settings. Reported-and-tested-by: Pavel Lucik <pavel.lucik@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-29ath9k: fix stale pointers potentially causing access to free'd skbsFelix Fietkau
bf->bf_next is only while buffers are chained as part of an A-MPDU in the tx queue. When a tid queue is flushed (e.g. on tearing down an aggregation session), frames can be enqueued again as normal transmission, without bf_next being cleared. This can lead to the old pointer being dereferenced again later. This patch might fix crashes and "Failed to stop TX DMA!" messages. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "This is what we usually expect at this stage of the game, lots of little things, mostly in drivers. With the occasional 'oops didn't mean to do that' kind of regressions in the core code." 1) Uninitialized data in __ip_vs_get_timeouts(), from Arnd Bergmann 2) Reject invalid ACK sequences in Fast Open sockets, from Jerry Chu. 3) Lost error code on return from _rtl_usb_receive(), from Christian Lamparter. 4) Fix reset resume on USB rt2x00, from Stanislaw Gruszka. 5) Release resources on error in pch_gbe driver, from Veaceslav Falico. 6) Default hop limit not set correctly in ip6_template_metrics[], fix from Li RongQing. 7) Gianfar PTP code requests wrong kind of resource during probe, fix from Wei Yang. 8) Fix VHOST net driver on big-endian, from Michael S Tsirkin. 9) Mallenox driver bug fixes from Jack Morgenstein, Or Gerlitz, Moni Shoua, Dotan Barak, and Uri Habusha. 10) usbnet leaks memory on TX path, fix from Hemant Kumar. 11) Use socket state test, rather than presence of FIN bit packet, to determine FIONREAD/SIOCINQ value. Fix from Eric Dumazet. 12) Fix cxgb4 build failure, from Vipul Pandya. 13) Provide a SYN_DATA_ACKED state to complement SYN_FASTOPEN in socket info dumps. From Yuchung Cheng. 14) Fix leak of security path in kfree_skb_partial(). Fix from Eric Dumazet. 15) Handle RX FIFO overflows more resiliently in pch_gbe driver, from Veaceslav Falico. 16) Fix MAINTAINERS file pattern for networking drivers, from Jean Delvare. 17) Add iPhone5 IDs to IPHETH driver, from Jay Purohit. 18) VLAN device type change restriction is too strict, and should not trigger for the automatically generated vlan0 device. Fix from Jiri Pirko. 19) Make PMTU/redirect flushing work properly again in ipv4, from Steffen Klassert. 20) Fix memory corruptions by using kfree_rcu() in netlink_release(). From Eric Dumazet. 21) More qmi_wwan device IDs, from Bjørn Mork. 22) Fix unintentional change of SNAT/DNAT hooks in generic NAT infrastructure, from Elison Niven. 23) Fix 3.6.x regression in xt_TEE netfilter module, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) tilegx: fix some issues in the SW TSO support qmi_wwan/cdc_ether: move Novatel 551 and E362 to qmi_wwan net: usb: Fix memory leak on Tx data path net/mlx4_core: Unmap UAR also in the case of error flow net/mlx4_en: Don't use vlan tag value as an indication for vlan presence net/mlx4_en: Fix double-release-range in tx-rings bas_gigaset: fix pre_reset handling vhost: fix mergeable bufs on BE hosts gianfar_ptp: use iomem, not ioports resource tree in probe ipv6: Set default hoplimit as zero. NET_VENDOR_TI: make available for am33xx as well pch_gbe: fix error handling in pch_gbe_up() b43: Fix oops on unload when firmware not found mwifiex: clean up scan state on error mwifiex: return -EBUSY if specific scan request cannot be honored brcmfmac: fix potential NULL dereference Revert "ath9k_hw: Updated AR9003 tx gain table for 5GHz" ath9k_htc: Add PID/VID for a Ubiquiti WiFiStation rt2x00: usb: fix reset resume rtlwifi: pass rx setup error code to caller ...
2012-10-26Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband fixes from Roland Dreier: "Small batch of fixes for 3.7: - Fix crash in error path in cxgb4 - Fix build error on 32 bits in mlx4 - Fix SR-IOV bugs in mlx4" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Perform correct resource cleanup if mlx4_QUERY_ADAPTER() fails mlx4_core: Remove annoying debug messages from SR-IOV flow RDMA/cxgb4: Don't free chunk that we have failed to allocate IB/mlx4: Synchronize cleanup of MCGs in MCG paravirtualization IB/mlx4: Fix QP1 P_Key processing in the Primary Physical Function (PPF) IB/mlx4: Fix build error on platforms where UL is not 64 bits
2012-10-26Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-10-26tilegx: fix some issues in the SW TSO supportChris Metcalf
This change correctly computes the header length and data length in the fragments to avoid a bug where we would end up with extremely slow performance. Also adopt use of skb_frag_size() accessor. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Cc: stable@vger.kernel.org [v3.6] Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-26qmi_wwan/cdc_ether: move Novatel 551 and E362 to qmi_wwanDan Williams
These devices provide QMI and ethernet functionality via a standard CDC ethernet descriptor. But when driven by cdc_ether, the QMI functionality is unavailable because only cdc_ether can claim the USB interface. Thus blacklist the devices in cdc_ether and add their IDs to qmi_wwan, which enables both QMI and ethernet simultaneously. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>