summaryrefslogtreecommitdiff
path: root/drivers/pwm
AgeCommit message (Collapse)Author
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-10-21Merge tag 'pwm/for-3.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "There are no new drivers here, only a couple of fixes all over the place" * tag 'pwm/for-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Let PWM_CLPS711X depend on HAS_IOMEM pwm: atmel: Fix calculation of prescale value pwm: Fix uninitialized warnings in pwm_get() pwm: rockchip: Allow polarity invert on rk3288 pwm: imx: Avoid sample FIFO overflow for i.MX PWM version2 pwm: imx: Cleanup indentation for register definitions pwm: imx: Fix the macro MX3_PWMCR_PRESCALER(x) definition pwm: Fix possible ZERO_SIZE_PTR pointer dereferencing error. pwm: lpss: make it buildable only on X86 pwm: lpss: use c99 initializers in structures pwm: lpss: Fix build failure on PowerPC pwm: lpss: pci: Move to use pcim_enable_device() pwm: lpss: Properly split driver to parts pwm: lpss: Add ACPI and PCI IDs for Intel Braswell pwm: fsl-ftm: Select REGMAP_MMIO pwm: fsl-ftm: Document 'big-endian' property pwm: fsl-ftm: Convert to direct regmap API usage pwm: fsl-ftm: Clean up the code
2014-10-20pwm: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20pwm: Let PWM_CLPS711X depend on HAS_IOMEMChen Gang
PWM_CLPS711X needs HAS_IOMEM, so depend on it, the related error (with allmodconfig under um): MODPOST 1205 modules ERROR: "devm_ioremap_resource" [drivers/pwm/pwm-clps711x.ko] undefined! ERROR: "devm_ioremap" [drivers/net/phy/mdio-bcm-unimac.ko] undefined! Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-09-25pwm: atmel: Fix calculation of prescale valueNikolaus Voss
The prescale value used for calculating the period was incremented afterwards, thus the resulting prescale value is by one too high. This resulted in a PWM frequency only half as high as requested. This patch moves the 64 bit division out of the prescale loop to correct the above issue and make the calculation more efficient. Signed-off-by: Nikolaus Voss <n.voss@weinmann-emt.de> Tested-by: Bo Shen <voice.shen@atmel.com> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-09-09Merge tag 'at91-cleanup2' of git://github.com/at91linux/linux-at91 into ↵Arnd Bergmann
next/cleanup Pull "Second batch of AT91 cleanup for 3.18" from Nicolas Ferre: - Timer Counter (TC) fixup and cleanup: - fix segmentation fault when kexec-ing a kernel by masking TC interrupts at shutdown and probe time - use modern driver model: devm_*, probe function, sanitize IRQ request Signed-off-by: Arnd Bergmann <arnd@arndb.de> * tag 'at91-cleanup2' of git://github.com/at91linux/linux-at91: clocksource: tcb_clksrc: sanitize IRQ request ARM: at91/tclib: mask interruptions at shutdown and probe ARM: at91/tclib: move initialization from alloc to probe ARM: at91/tclib: prefer using of devm_* functions
2014-09-08ARM: at91/tclib: move initialization from alloc to probeGaël PORTAY
Move resource retrieval from atmel_tc_alloc to tc_probe to avoid lately reporting resource related issues when a TC block user request a TC block. Moreover, resources retrieval are usually done in the probe function, thus moving them add some consistency with other drivers. Initialization is done once, ie not every time a tc block is requested. If it fails, the device is not appended to the list of tc blocks. Furhermore, the device id is retrieved at probe as well, avoiding parsing DT every time the user requests of tc block. Signed-off-by: Gaël PORTAY <gael.portay@gmail.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-29pwm: Fix uninitialized warnings in pwm_get()Geert Uytterhoeven
With some versions of gcc (e.g. 4.1.2): drivers/pwm/core.c: In function ‘pwm_get’: drivers/pwm/core.c:610: warning: ‘polarity’ may be used uninitialized in this function drivers/pwm/core.c:609: warning: ‘period’ may be used uninitialized in this function While these are false positives, we can get rid of them by refactoring the code to store a pointer to the best match, as suggested before by Thierry Reding. This does require moving the mutex_unlock() down. Fixes: d717ea73e36dd565 ("pwm: Fix period and polarity in pwm_get() for non-perfect matches") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-26pwm: rockchip: Allow polarity invert on rk3288Doug Anderson
The rk3288 has the ability to invert the polarity of the PWM. Let's enable that ability. Note that this increases pwm_cells to 3 for rk3288. Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Caesar Wang <caesar.wang@rock-chips.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-25pwm: imx: Avoid sample FIFO overflow for i.MX PWM version2Liu Ying
The i.MX PWM version2 is embedded in several i.MX SoCs, such as i.MX27, i.MX51 and i.MX6SL. There is a 4-word (16 bit) sample FIFO in this IP. Each FIFO slot determines the duty period of a PWM waveform in one full cycle. The IP spec mentions that we should not write a fourth sample because the FIFO will become full and triggers a FIFO write error (FWE) which will prevent the PWM from starting once it is enabled. In order to avoid any sample FIFO overflow issue, this patch clears all sample FIFO by doing software reset in the configuration hook when the controller is disabled or waits for a full PWM cycle to get a relinquished FIFO slot when the controller is enabled and the FIFO is fully loaded. The FIFO overflow issue can be reproduced by the following commands on the i.MX6SL EVK platform, assuming we use PWM2 for the debug LED which is driven by the pin HSIC_STROBE and the maximal brightness is 255. echo 0 > /sys/class/leds/user/brightness echo 0 > /sys/class/leds/user/brightness echo 0 > /sys/class/leds/user/brightness echo 0 > /sys/class/leds/user/brightness echo 255 > /sys/class/leds/user/brightness Here, FWE happens (PWMSR register reads 0x58) and the LED can not be lighten. Another way to reproduce the FIFO overflow issue is to run this script: while true; do echo 255 > /sys/class/leds/user/brightness; done Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: linux-pwm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-25pwm: imx: Cleanup indentation for register definitionsLiu Ying
This patch contains no logic change to cleanup indentation for register definitions only. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: linux-pwm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-25pwm: imx: Fix the macro MX3_PWMCR_PRESCALER(x) definitionLiu Ying
This patch adds missing parentheses around the argument of the macro MX3_PWMCR_PRESCALER(x) to avoid any potential macro expansion issue. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: linux-pwm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-25pwm: Fix possible ZERO_SIZE_PTR pointer dereferencing error.Xiubo Li
Since we cannot make sure the 'chip->npwm' will always be none zero here, and then if either equal to zero, the kzalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the zero check before calling kzalloc(). Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-25pwm: lpss: make it buildable only on X86Andy Shevchenko
There is no sign of this IP block on non-x86 architectures and rather will not be. Thus, make this explicit by applying a direct dependency to X86. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-25pwm: lpss: use c99 initializers in structuresJulia Lawall
Use c99 initializers for structures. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @decl@ identifier i1,fld; type T; field list[n] fs; @@ struct i1 { fs T fld; ...}; @bad@ identifier decl.i1,i2; expression e; initializer list[decl.n] is; @@ struct i1 i2 = { is, + .fld = e - e ,...}; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> [thierry.reding: rebased and applied same fix for Braswell] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-23pwm: lpss: Fix build failure on PowerPCThierry Reding
An x86 build seems to pull in the linux/io.h include indirectly. On PowerPC that doesn't happen and the build breaks due to the readl() and writel() functions not being declared. Fix this by explicitly including linux/io.h. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-23pwm: lpss: pci: Move to use pcim_enable_device()Andy Shevchenko
Let's use managed functions for this driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-23pwm: lpss: Properly split driver to partsAndy Shevchenko
The driver consists of core, PCI, and platform parts. It would be better to split them into separate files. The platform driver is now called pwm-lpss-platform. Thus, previously set CONFIG_PWM_LPSS=m is not enough to build it. But we are on the safe side since it seems no one from outside Intel is using it for now. While here, move to use macros module_pci_driver() and module_platform_driver(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Alan Cox <alan@linux.intel.com> [thierry.reding: change select to depends on PWM_LPSS, cleanup] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-22pwm: lpss: Add ACPI and PCI IDs for Intel BraswellAlan Cox
This is pretty much the same as Baytrail PWM. Only difference is that the input clock runs on different frequency. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-22pwm: fsl-ftm: Select REGMAP_MMIOFabio Estevam
Commit 42fa98a9c360 ("pwm: fsl-ftm: Convert to direct regmap API usage") introduced the following error when REGMAP_MMIO=n: drivers/built-in.o: In function `fsl_pwm_probe': >> pwm-fsl-ftm.c:(.text+0xd7d7): undefined reference to `devm_regmap_init_mmio_clk' Select select REGMAP_MMIO in order to fix this error. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-20pwm: fsl-ftm: Convert to direct regmap API usageXiubo Li
The regmap core supports different endian modes for devices. This patch convert to direct regmap API usage, preparing to support big endianness for LS1 SoC. Using the regmap framework it will be easy to support devices that only differ in endianness with the same device driver. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-20pwm: fsl-ftm: Clean up the codeXiubo Li
This patch intends to prepare for converting to direct regmap API usage. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-18pwm: Fix period and polarity in pwm_get() for non-perfect matchesGeert Uytterhoeven
If pwm_get() finds a look-up entry with a perfect match (both dev_id and con_id match), the loop is aborted, and "p" still points to the correct struct pwm_lookup. If only an entry with a matching dev_id or con_id is found, the loop terminates after traversing the whole list, and "p" now points to arbitrary memory, not part of the pwm_lookup list. Then pwm_set_period() and pwm_set_polarity() will set random values for period resp. polarity. To fix this, save period and polarity when finding a new best match, just like is done for chip (for the provider) and index. This fixes the LCD backlight on r8a7740/armadillo-legacy, which was fed period 0 and polarity -1068821144 instead of 33333 resp. 1. Fixes: 3796ce1d4d4b ("pwm: add period and polarity to struct pwm_lookup") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-08Merge tag 'pwm/for-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "The set of changes for this merge window contains two new drivers: one for Rockchip SoCs and another for STMicroelectronics STiH4xx SoCs. The remainder of the changes are the usual small cleanups such as removing redundant OOM messages, signalling that a PWM chip's operations can sleep and removing an unneeded dependency" * tag 'pwm/for-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: rockchip: Added to support for RK3288 SoC pwm: rockchip: document RK3288 SoC compatible pwm: sti: Remove PWM period table pwm: sti: Sync between enable/disable calls pwm: sti: Ensure same period values for all channels pwm: sti: Fix PWM prescaler handling pwm: sti: Supply Device Tree binding documentation for ST's PWM IP pwm: sti: Add new driver for ST's PWM IP pwm: imx: set can_sleep flag for imx_pwm pwm: lpss: remove dependency on clk framework pwm: pwm-tipwmss: remove unnecessary OOM messages pwm: rockchip: document device tree bindings pwm: add Rockchip SoC PWM support
2014-08-08pwm: rockchip: Added to support for RK3288 SoCCaesar Wang
This patch added to support the PWM controller found on RK3288 SoC. Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-08pwm: sti: Remove PWM period tableAjit Pal Singh
Removes the PWM period table. Instead the prescaler is computed from the period value passed in the config() function. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-08pwm: sti: Sync between enable/disable callsAjit Pal Singh
ST PWM IP has a common enable/disable control for all the PWM channels on a PWM cell. Disables PWM output on the PWM HW only when disable is called for the last channel. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-08pwm: sti: Ensure same period values for all channelsAjit Pal Singh
ST PWM IP shares the same clock prescaler across all the PWM channels. Hence configuration requests which change the period will affect all the channels. Do not allow period changes which will stomp period settings of the already configured channels. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-08pwm: sti: Fix PWM prescaler handlingAjit Pal Singh
This patch fixes the pwm driver to write the complete 8 bits of the prescaler value to the PWM Control register. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-07pwm: sti: Add new driver for ST's PWM IPLee Jones
This driver supports all current STi platforms' PWM IPs. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> [thierry.reding: rename module to pwm-sti, fix build breakage] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-07pwm: imx: set can_sleep flag for imx_pwmShawn Guo
The .config() hook imx_pwm_config() calls clk APIs like clk_prepare() and clk_get_rate(), which might sleep, so we need to set can_sleep flag on pwm_chip. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-07pwm: lpss: remove dependency on clk frameworkHeikki Krogerus
Unlike other Intel LPSS devices, the PWM does not have the clock dividers or the gate. All we get from the clock is the rate. Since PCI case uses the driver data to get the rate, we can drop the clk and use the same data also in case of ACPI. The frequency is the same. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-07pwm: pwm-tipwmss: remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. The following checkpatch warning is also removed. WARNING: Possible unnecessary 'out of memory' message Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-07-11pwm: add Rockchip SoC PWM supportBeniamino Galvani
This commit adds a driver for the PWM controller found on Rockchip RK29, RK30 and RK31 SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-07-09PWM: atmel: allow building for AVR32Alexandre Belloni
The Atmel PWM IP can be found on avr32 chips. This allows selecting and building the driver on avr32. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-11Merge tag 'pwm/for-3.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "The majority of these changes are cleanups and fixes across all drivers. Redundant error messages are removed and more PWM controllers set the .can_sleep flag to signal that they can't be used in atomic context. Support is added for the Broadcom Kona family of SoCs and the Intel LPSS driver can now probe PCI devices in addition to ACPI devices. Upon shutdown, the pwm-backlight driver will now power off the backlight. It also uses the new descriptor-based GPIO API for more concise GPIO handling. A large chunk of these changes also converts platforms to use the lookup mechanism rather than relying on the global number space to reference PWM devices. This is largely in preparation for more unification and cleanups in future patches. Eventually it will allow the legacy PWM API to be removed" * tag 'pwm/for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (38 commits) pwm: fsl-ftm: set pwm_chip can_sleep flag pwm: ab8500: Fix wrong value shift for disable/enable PWM pwm: samsung: do not set manual update bit in pwm_samsung_config pwm: lp3943: Set pwm_chip can_sleep flag pwm: atmel: set pwm_chip can_sleep flag pwm: mxs: set pwm_chip can_sleep flag pwm: tiehrpwm: inline accessor functions pwm: tiehrpwm: don't build PM related functions when not needed pwm-backlight: retrieve configured PWM period leds: leds-pwm: retrieve configured PWM period ARM: pxa: hx4700: use PWM_LOOKUP to initialize struct pwm_lookup ARM: shmobile: armadillo: use PWM_LOOKUP to initialize struct pwm_lookup ARM: OMAP3: Beagle: use PWM_LOOKUP to initialize struct pwm_lookup pwm: modify PWM_LOOKUP to initialize all struct pwm_lookup members ARM: pxa: hx4700: initialize all the struct pwm_lookup members ARM: OMAP3: Beagle: initialize all the struct pwm_lookup members pwm: renesas-tpu: remove unused struct tpu_pwm_platform_data ARM: shmobile: armadillo: initialize all struct pwm_lookup members pwm: add period and polarity to struct pwm_lookup pwm: twl: Really disable twl6030 PWMs ...
2014-05-23pwm: fsl-ftm: set pwm_chip can_sleep flagAxel Lin
The implementation of .config(), .enable() and .disable() operations in this driver may sleep, thus set pwm_chip can_sleep flag. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-21pwm: ab8500: Fix wrong value shift for disable/enable PWMAxel Lin
Current code only works when pdev->id is 1. Fix it by passing correct bit values to abx500_mask_and_set_register_interruptible(). Having DISABLE_PWM/ENABLE_PWM does not make the code more readable because the bit values depend on pdev->id. Thus drop the DISABLE_PWM and ENABLE_PWM defines. This patch also removes an unnecessary return in ab8500_pwm_disable(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexandre BOURDIOL <alexandre.bourdiol@st.com> Acked-by: Philippe Begnic <philippe.begnic@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-21pwm: samsung: do not set manual update bit in pwm_samsung_configAjay Kumar
pwm_samsung_config() sets the manual update bit via a call to the pwm_samsung_enable() function even when the channel is already running. This causes noticable flicker on display if we try to change the backlight brightness from minimum to maximum, continuously. So, we remove the call to pwm_samsung_enable() from pwm_samsung_config to avoid the flicker and this change doesn't harm normal working since the pwm-backlight driver already calls pwm_samsung_enable() where needed. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-21pwm: lp3943: Set pwm_chip can_sleep flagAxel Lin
Read/write through I2C can sleep, thus set pwm_chip can_sleep flag. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-21pwm: atmel: set pwm_chip can_sleep flagAlexandre Belloni
atmel_pwm_config() calls clk_get_rate() which might sleep, so we need to set pwm_chip can_sleep flag. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-21pwm: mxs: set pwm_chip can_sleep flagShawn Guo
The .config() calls clk_get_rate() which might sleep, so we need to set pwm_chip can_sleep flag. Otherwise, we see the following warning when using PWM driven heartbeat led. WARNING: CPU: 0 PID: 0 at kernel/locking/mutex.c:856 mutex_trylock+0x184/0x1a4() DEBUG_LOCKS_WARN_ON(in_interrupt()) Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.14.0-rc5 #18 [<c0015420>] (unwind_backtrace) from [<c0012cb0>] (show_stack+0x10/0x14) [<c0012cb0>] (show_stack) from [<c001daf8>] (warn_slowpath_common+0x6c/0x8c) [<c001daf8>] (warn_slowpath_common) from [<c001dbac>] (warn_slowpath_fmt+0x30/0x40) [<c001dbac>] (warn_slowpath_fmt) from [<c045df74>] (mutex_trylock+0x184/0x1a4) [<c045df74>] (mutex_trylock) from [<c0360950>] (clk_prepare_lock+0xc/0xec) [<c0360950>] (clk_prepare_lock) from [<c0362020>] (clk_get_rate+0xc/0x68) [<c0362020>] (clk_get_rate) from [<c028d07c>] (mxs_pwm_config+0x20/0x198) [<c028d07c>] (mxs_pwm_config) from [<c028bde8>] (pwm_config+0x60/0x70) [<c028bde8>] (pwm_config) from [<c034b61c>] (__led_pwm_set+0x1c/0x3c) [<c034b61c>] (__led_pwm_set) from [<c034bc3c>] (led_heartbeat_function+0x70/0x110) [<c034bc3c>] (led_heartbeat_function) from [<c00292f0>] (call_timer_fn+0x7c/0x164) [<c00292f0>] (call_timer_fn) from [<c00295c8>] (run_timer_softirq+0x1f0/0x260) [<c00295c8>] (run_timer_softirq) from [<c002255c>] (__do_softirq+0xc4/0x2f0) [<c002255c>] (__do_softirq) from [<c0022890>] (irq_exit+0xa4/0x10c) [<c0022890>] (irq_exit) from [<c0010240>] (handle_IRQ+0x34/0x84) [<c0010240>] (handle_IRQ) from [<c0013524>] (__irq_svc+0x44/0x54) [<c0013524>] (__irq_svc) from [<c00107f8>] (arch_cpu_idle+0x40/0x48) [<c00107f8>] (arch_cpu_idle) from [<c005deb8>] (cpu_startup_entry+0x70/0x198) [<c005deb8>] (cpu_startup_entry) from [<c060aac8>] (start_kernel+0x2a8/0x2f8) Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-21pwm: tiehrpwm: inline accessor functionsWolfram Sang
These elementary functions should be inlined for fastest access. Also fixes this warning as a side-effect (when no PM_SLEEP is selected): drivers/pwm/pwm-tiehrpwm.c:141:12: warning: 'ehrpwm_read' defined but not used [-Wunused-function] Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-21pwm: tiehrpwm: don't build PM related functions when not neededWolfram Sang
Fixes following warnings on AM335X with no PM_SLEEP drivers/pwm/pwm-tiehrpwm.c:534:13: warning: 'ehrpwm_pwm_save_context' defined but not used [-Wunused-function] drivers/pwm/pwm-tiehrpwm.c:548:13: warning: 'ehrpwm_pwm_restore_context' defined but not used [-Wunused-function] Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-21pwm: renesas-tpu: remove unused struct tpu_pwm_platform_dataAlexandre Belloni
The struct is not used anymore and the polarity initialization will be done using the PWM lookup table (or device tree). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-21pwm: add period and polarity to struct pwm_lookupAlexandre Belloni
Add period and polarity members to struct pwm_lookup so that platforms using the lookup table can be treated the same way as those using the device tree. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-08pwm: twl: Really disable twl6030 PWMsAxel Lin
Current twl6030_pwm_disable() implementation writes TWL6030_TOGGLE3_REG twice, the second write sets TWL6030_PWMXEN bits so the PWM clock does not disable. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-07pwm: lpss: Fix const qualifier and sparse warningsThierry Reding
Fixes the following warnings reported by the 0-DAY kernel build testing backend: drivers/pwm/pwm-lpss.c: In function 'pwm_lpss_probe_pci': >> drivers/pwm/pwm-lpss.c:192:2: warning: passing argument 3 of 'pwm_lpss_probe' discards 'const' qualifier from pointer target type [enabled by default] lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info); ^ drivers/pwm/pwm-lpss.c:130:30: note: expected 'struct pwm_lpss_boardinfo *' but argument is of type 'const struct pwm_lpss_boardinfo *' static struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, ^ >> drivers/pwm/pwm-lpss.c:143:28: sparse: incorrect type in return expression (different address spaces) drivers/pwm/pwm-lpss.c:143:28: expected struct pwm_lpss_chip * drivers/pwm/pwm-lpss.c:143:28: got void [noderef] <asn:2>*regs >> drivers/pwm/pwm-lpss.c:192:63: sparse: incorrect type in argument 3 (different modifiers) drivers/pwm/pwm-lpss.c:192:63: expected struct pwm_lpss_boardinfo *info drivers/pwm/pwm-lpss.c:192:63: got struct pwm_lpss_boardinfo const *[assigned] info drivers/pwm/pwm-lpss.c: In function 'pwm_lpss_probe_pci': drivers/pwm/pwm-lpss.c:192:2: warning: passing argument 3 of 'pwm_lpss_probe' discards 'const' qualifier from pointer target type [enabled by default] lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info); ^ drivers/pwm/pwm-lpss.c:130:30: note: expected 'struct pwm_lpss_boardinfo *' but argument is of type 'const struct pwm_lpss_boardinfo *' static struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, ^ Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-07pwm: spear: fix check on pwmchip_add() return valueBeniamino Galvani
pwmchip_add() returns zero on success and a negative value on error, so the condition of the check must be inverted. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-04-28pwm: lpss: Add support for PCI devicesAlan Cox
Not all systems enumerate the PWM devices via ACPI. They can also be exposed via the PCI interface. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 06:39:39 +0000