summaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2009-04-068250: Fix warningAlan Cox
The 8430 patch was short a const so caused a warning. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06icom: remove unused variablesBreno Leitao
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06jsm: Fix the return variable and removing the unused retval.Breno Leitao
As it was, the retval was never returned, so its assignments were silly. Just consolidate everything to rc, and remove the unused retval variable. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@etchedpixels.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06jsm: define init function as __devinitBreno Leitao
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06ucc: Fix leaky error pathAlan Cox
Found by Daniel Marjamäki using cppcheck Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: Subtract ANOMALY_05000230 on quotGraf Yang
Fix bug - up arrow key works abnormal for bf561 ezkit board Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06Fix DMA rx ring buffer handlingSonic Zhang
Reported-by: Qian Zhang <zhangq@sansitech.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: Fix tty compile error in PIO modeSonic Zhang
Fixes this compile issue: drivers/serial/bfin_5xx.c: In function bfin_serial_rx_chars: drivers/serial/bfin_5xx.c:178: error: struct uart_info has no member named tty Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: Use unsigned long for flags with irq functionsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: BF538/9 serial uart supportMichael Hennerich
Enable third UART on BF538/9 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-068250_pci: add support for National Instruments legacy 8420 RS232 boardsWill Page
Signed-off-by: Will Page <will.page@ni.com> Signed-off-by: Shawn Bohrer <shawn.bohrer@ni.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-068250_pci: add support for National Instruments 843x RS232 devicesShawn Bohrer
This implements basic support for all 843x RS232 devices, but does not add DMA support. This means that sustained data transfers at high baud rates may not be possible on multiple ports simultaneously. Signed-off-by: Shawn Bohrer <shawn.bohrer@ni.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06serial: Update PNP IDsMatthew Garrett
Add new Wacom device IDs to the 8250_pnp serial driver, to support autoconfig on some newer tablet PCs. Also add a comment to clarify that the FUJ02E6 device is a custom protocol, not a Wacom tablet. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@etchedpixels.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-068250_pnp.c: add another Wacom tabletDanny Kukawka
Add another serial Wacom tablet with pnp_id: WACF009. Signed-off-by: Danny Kukawka <dkukawka@suse.de> Signed-off-by: Alan Cox <alan@etchedpixels.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-05Merge branch 'avr32-arch' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * 'avr32-arch' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: avr32: add hardware handshake support to atmel_serial avr32: add RTS/CTS/CLK pin selection for the USARTs Add RTC support for Merisc boards avr32: at32ap700x: setup DMA for AC97C in the machine code avr32: at32ap700x: setup DMA for ABDAC in the machine code Add Merisc board support avr32: use gpio_is_valid() to check USBA vbus_pin I/O line atmel-usba-udc: use gpio_is_valid() to check vbus_pin I/O line avr32: fix timing LCD parameters for EVKLCD10X boards avr32: use GPIO line PB15 on EVKLCD10x boards for backlight avr32: configure MCI detect and write protect pins for EVKLCD10x boards avr32: set pin mask to alternative 18 bpp for EVKLCD10x boards avr32: add pin mask for 18-bit color on the LCD controller avr32: fix 15-bit LCDC pin mask to use MSB lines
2009-04-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) trivial: Update my email address trivial: NULL noise: drivers/mtd/tests/mtd_*test.c trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h trivial: Fix misspelling of "Celsius". trivial: remove unused variable 'path' in alloc_file() trivial: fix a pdlfush -> pdflush typo in comment trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL trivial: wusb: Storage class should be before const qualifier trivial: drivers/char/bsr.c: Storage class should be before const qualifier trivial: h8300: Storage class should be before const qualifier trivial: fix where cgroup documentation is not correctly referred to trivial: Give the right path in Documentation example trivial: MTD: remove EOL from MODULE_DESCRIPTION trivial: Fix typo in bio_split()'s documentation trivial: PWM: fix of #endif comment trivial: fix typos/grammar errors in Kconfig texts trivial: Fix misspelling of firmware trivial: cgroups: documentation typo and spelling corrections trivial: Update contact info for Jochen Hein trivial: fix typo "resgister" -> "register" ...
2009-04-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (41 commits) m68knommu: improve compile arch switch settings m68knommu: fix 5407 ColdFire UART vector setup m68knommu: fix 5307 ColdFire UART vector setup m68knommu: fix 5249 ColdFire UART vector setup m68knommu: fix 5249 ColdFire UART setup m68knommu: fix end of uart table marker m68knommu: switch to using generic_handle_irq() m68k: merge the mmu and non-mmu versions of tlbflush.h m68knommu: introduce basic clk infrastructure m68k: merge the mmu and non-mmu versions of module.h m68knommu: add missing interrupt line definition for UART 2 m68k: merge the mmu and non-mmu versions of mmu_context.h m68k: merge the mmu and non-mmu versions of current.h m68k: merge the mmu and non-mmu versions of div64.h m68k: merge the mmu and non-mmu versions of bugs.h m68k: merge the mmu and non-mmu versions of bug.h m68k: use the mmu version of cache.h for m68knommu as well m68k: use the mmu version of bootinfo.h for m68knommu as well m68k: merge the mmu and non-mmu versions of fb.h m68k: merge the mmu and non-mmu versions of segment.h ...
2009-04-01serial: fixup /proc/tty/driver/serial after proc_fops conversionAlexey Dobriyan
"struct tty_driver *" lies in m->private not in v which is SEQ_TOKEN_START which is 1 which is enough to trigger NULL dereference next line: BUG: unable to handle kernel NULL pointer dereference at 000000ad IP: [<c040d689>] uart_proc_show+0xe/0x2b0 Noticed by Linus. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01proc tty: switch serial_core to ->proc_fopsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01avr32: add hardware handshake support to atmel_serialPeter Ma
Adds Hardware Handshake (aka RTS/CTS flow-control) support to atmel_serial driver, as a termios flag. For this to actually work, the platform code needs to configure the RTS and CTS pins for use by the USART. This has been done for AVR32 as a separate patch. Signed-off-by: Peter Ma <pma@mediamatech.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
2009-03-30trivial: fix typos/grammar errors in Kconfig textsMatt LaPlante
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30Merge commit 'origin/master' into nextBenjamin Herrenschmidt
Manual merge of: arch/powerpc/include/asm/elf.h drivers/i2c/busses/i2c-mpc.c
2009-03-28Merge branch 'origin' into develRussell King
Conflicts: sound/soc/pxa/pxa2xx-i2s.c
2009-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (61 commits) Dynamic debug: fix pr_fmt() build error Dynamic debug: allow simple quoting of words dynamic debug: update docs dynamic debug: combine dprintk and dynamic printk sysfs: fix some bin_vm_ops errors kobject: don't block for each kobject_uevent sysfs: only allow one scheduled removal callback per kobj Driver core: Fix device_move() vs. dpm list ordering, v2 Driver core: some cleanup on drivers/base/sys.c Driver core: implement uevent suppress in kobject vcs: hook sysfs devices into object lifetime instead of "binding" driver core: fix passing platform_data driver core: move platform_data into platform_device sysfs: don't block indefinitely for unmapped files. driver core: move knode_bus into private structure driver core: move knode_driver into private structure driver core: move klist_children into private structure driver core: create a private portion of struct device driver core: remove polling for driver_probe_done(v5) sysfs: reference sysfs_dirent from sysfs inodes ... Fixed conflicts in drivers/sh/maple/maple.c manually
2009-03-25[ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-24serial: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Cc: davem@davemloft.net Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-24Merge branch 'devel' of ↵root
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-03-24m68knommu: Fix support for console port other than ttyS0 on mcf.cLen Sorensen
Due to a case of backwards logic, mfc.c always makes the console port be ttyS0 even when you ask for another port. This patch fixes this issue. Only when the requested port is NOT in the range 0 to MAXPORTS-1 do we force it to be treated as if port 0 was requested. Forcing the port to 0 when it is in fact in the range 0 to MAXPORTS is not helpful. Tested with working console on ttyS2 on a 5271evb. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-23[ARM] pxa: allow reuse of serial driver for pxa168Eric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-13Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into develRussell King
Conflicts: arch/arm/mach-at91/gpio.c
2009-03-13[ARM] MXC: remove _clk suffix from clock namesSascha Hauer
The context makes it clear already that these are clocks, so there's no need for such a suffix. This patch only changes the clocks actually used in the tree. The remaining clocks are renamed in the subsequent architecture specific patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-11Merge commit 'origin/master' into nextBenjamin Herrenschmidt
2009-03-10Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2009-03-09cpm_uart: fix non-console port startup bugXiaotian Feng
After UART interrupt handler is installed and rx is enabled, if an rx interrupt comes before hardware init, rx->cur will be updated. Then the hardware init will reset BD and make rx->cur out of sync, move the hardware init code before request_irq. Signed-off-by: Xiaotian Feng <xiaotian.feng@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-09[ARM] pxa: remove machine class specific stuffs from serial driverEric Miao
The only things prevent drivers/serial/pxa.c from being generic enough are: 1. IER_UUE which can be safely replaced by UART_IER_UUE as defined in serial_reg.h for PXA 2. __PREG() and FFUART/BTUART/STUART definitions to decide the UART port name And removed the un-necessary #include of <mach/...> and <asm/...> headers. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-03sh: Add support for SH7786 CPU subtype.Kuninori Morimoto
This adds preliminary support for the SH7786 CPU subtype. While this is a dual-core CPU, only UP is supported for now. L2 cache support is likewise not yet implemented. More information on this particular CPU subtype is available at: http://www.renesas.com/fmwk.jsp?cnt=sh7786_root.jsp&fp=/products/mpumcu/superh_family/sh7780_series/sh7786_group/ Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27Merge branch 'sh/for-2.6.29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: ap325rxa: Revert ov772x support. serial: sh-sci: fix overrun error handling for SH7785 SCIF. sh: Storage class should be before const qualifier
2009-02-27serial: sh-sci: console drainageMagnus Damm
Modify the serial console code to wait for the transmit FIFO, make sure all bits have been put on the wire before returning. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-208250: fix boot hang with serial console when using with Serial Over Lan portMauro Carvalho Chehab
Intel 8257x Ethernet boards have a feature called Serial Over Lan. This feature works by emulating a serial port, and it is detected by kernel as a normal 8250 port. However, this emulation is not perfect, as also noticed on changeset 7500b1f602aad75901774a67a687ee985d85893f. Before this patch, the kernel were trying to check if the serial TX is capable of work using IRQ's. This were done with a code similar this: serial_outp(up, UART_IER, UART_IER_THRI); lsr = serial_in(up, UART_LSR); iir = serial_in(up, UART_IIR); serial_outp(up, UART_IER, 0); if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) up->bugs |= UART_BUG_TXEN; This works fine for other 8250 ports, but, on 8250-emulated SoL port, the chip is a little lazy to down UART_IIR_NO_INT at UART_IIR register. Due to that, UART_BUG_TXEN is sometimes enabled. However, as TX IRQ keeps working, and the TX polling is now enabled, the driver miss-interprets the IRQ received later, hanging up the machine until a key is pressed at the serial console. This is the 6 version of this patch. Previous versions were trying to introduce a large enough delay between serial_outp and serial_in(up, UART_IIR), but not taking forever. However, the needed delay couldn't be safely determined. At the experimental tests, a delay of 1us solves most of the cases, but still hangs sometimes. Increasing the delay to 5us was better, but still doesn't solve. A very high delay of 50 ms seemed to work every time. However, poking around with delays and pray for it to be enough doesn't seem to be a good approach, even for a quirk. So, instead of playing with random large arbitrary delays, let's just disable UART_BUG_TXEN for all SoL ports. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18jsm: additional device supportAdam Lackorzynski
I have a Digi Neo 8 PCI card (114f:00b1) Serial controller: Digi International Digi Neo 8 (rev 05) that works with the jsm driver after using the following patch. Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Cc: Scott H Kilau <Scott_Kilau@digi.com> Cc: Wendy Xiong <wendyx@us.ibm.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18atmel_serial might lose modem status changeAtsushi Nemoto
I found a problem of handling of modem status of atmel_serial driver. With the commit 1ecc26 ("atmel_serial: split the interrupt handler"), handling of modem status signal was splitted into two parts. The atmel_tasklet_func() compares new status with irq_status_prev, but irq_status_prev is not correct if signal status was changed while the port is closed. Here is a sequence to cause problem: 1. Remote side sets CTS (and DSR). 2. Local side close the port. 3. Local side clears RTS and DTR. 4. Remote side clears CTS and DSR. 5. Local side reopen the port. hw_stopped becomes 1. 6. Local side sets RTS and DTR. 7. Remote side sets CTS and DSR. Then CTS change interrupt can be received, but since CTS bit in irq_status_prev and new status is same, uart_handle_cts_change() will not be called (so hw_stopped will not be cleared, i.e. cannot send any data). I suppose irq_status_prev should be initialized at somewhere in open sequence. Itai Levi pointed out that we need to initialize atmel_port->irq_status as well here. His analysis is as follows: > Regarding the second part of the patch (which resets irq_status_prev), > it turns out that both versions of the patch (mine and Atsushi's) > still leave enough room for faulty behavior when opening the port. > > This is because we are not resetting both irq_status_prev and > irq_status in atmel_startup() to CSR, which leads faulty behavior in > the following sequences: > > First case: > 1. closing the port while CTS line = 1 (TX not allowed) > 2. setting CTS line = 0 (TX allowed) > 3. opening the port > 4. transmitting one char > 5. Cannot transmit more chars, although CTS line is 0 > > Second case: > 1. closing the port while CTS line = 0 (TX allowed) > 2. setting CTS line = 1 (TX not allowed) > 3. opening the port > 4. receiving some chars > 5. Now we can transmit, although CTS line is 1 > > This reason for this is that the tasklet is scheduled as a result of > TX or RX interrupts (not a status change!), in steps 4 above. Inside > the tasklet, the atmel_port->irq_status (which holds the value from > the previous session) is compared to atmel_port->irq_status_prev. > Hence, a status-change of the CTS line is faultily detected. > > Both cases were verified on 9260 hardware. [haavard.skinnemoen@atmel.com: folded with patch from Itai Levi] Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Remy Bohmer <linux@bohmer.net> Cc: Marc Pignat <marc.pignat@hevs.ch> Cc: Itai Levi <itai.levi.devel@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-12Merge branch 'sh/stable-updates'Paul Mundt
2009-02-12serial: sh-sci: fix overrun error handling for SH7785 SCIF.Kuninori Morimoto
There was a typo for the overrun bit definition, causing it not to be handled correctly on SH7785, fix it up. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-04powerpc/5200: Don't specify IRQF_SHARED in PSC UART driverGrant Likely
The MPC5200 PSC device is wired up to a dedicated interrupt line which is never shared. This patch removes the IRQF_SHARED flag from the request_irq() call which eliminates the "IRQF_DISABLED is not guaranteed on shared IRQs" warning message from the console output. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
2009-02-03powerpc/5200: Stop using device_type and port-number propertiesGrant Likely
There is no reason for the PSC UART driver or the Ethernet driver to require a device_type property. The compatible value is sufficient to uniquely identify the device. Remove it from the driver. The whole 'port-number' scheme for assigning numbers to PSC uarts was always rather half baked and just adds complexity. Remove it from the driver. After this patch is applied, PSC UART numbers are simply assigned from the order they are found in the device tree (just like all the other devices). Userspace can query sysfs to determine what ttyPSC number is assigned to each PSC instance. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
2009-01-30Add enable_ms to jsm driverPaul Larson
This fixes a crash observed when non-existant enable_ms function is called for jsm driver. Signed-off-by: Scott Kilau <Scott.Kilau@digi.com> Signed-off-by: Paul Larson <pl@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-29Merge branch 'sh/stable-updates'Paul Mundt
2009-01-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix 5329 ColdFire periphal addressing uclinux: add process name to allocation error message m68knommu: correct the mii calculations for 532x ColdFire FEC m68knommu: add ColdFire M532x to the FEC configuration options m68knommu: fix syscall restarting m68knommu: remove the obsolete and long unused comempci chip support m68knommu: remove the no longer used PCI support option m68knommu: remove obsolete and unused eLIA board m68knommu: set NO_DMA m68knommu: fix cache flushing for the 527x ColdFire processors m68knommu: fix ColdFire 5272 serial baud rates in mcf.c m68knommu: use one exist from execption
2009-01-27Add support for '8-port RS-232 MIC-3620 from advantech'Michael Bramer
This Patch add the device information for the MIC-3620 8-port RS-232 cPCI card from Advantech Co. Ltd. Signed-off-by: Michael Bramer <grisu@deb-support.de> Signed-off-by: Alan Cox <number6@the-village.bc.nu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-27Move jsm_remove_one to .devexit.textUwe Kleine-König
The function jsm_remove_one is used only wrapped by __devexit_p so define it using __devexit. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Alan Cox <number6@the-village.bc.nu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 05:30:04 +0000