Age | Commit message (Collapse) | Author |
|
In SDM660 WSA speaker using MSM over soundwire version,
observe high cold start latency. As interrupt is disabled,
broadcast ack is not received which results in 200ms higher
latency. Reduce latency impact by blocking only for 10ms
for MSM over soundwire version.
Change-Id: Ic0e659d7c443c1462aba4da2f8bf9471031d02d2
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
|
|
Soundwire does not have usecase with smart boost disabled. This
results in data port collisions when smart boost port is disabled
from mixer control which results in noise during audio playback.
Add usecase and port configurations with smart boost disabled.
Change-Id: I014e438b3e5810508f8b52716684cbb9608822ac
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
|
|
Some of the usecases without compander and with
smart boost, VI sense are added in soundwire controller
driver.
Change-Id: Ia380ee6ad4584c29feb80fdc3b9247dd11e64a3e
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
|
|
|
|
In soundwire read/write commands, register value is defined
as 8 bit but it is accessed through 32 bit pointer which
may cause out of boundary memory access. Fix this issue by
typecast appropriately.
BUG: KASan: out of bounds access in swrm_read+0x1dc/0x30c at
addr ffffffc089871880
Write of size 4 by task kworker/u8:5/236
==addr ffffffc089871880
[<ffffffc00081d174>] swrm_read+0x1d8/0x30c
[<ffffffc000819808>] swr_read+0x5c/0x74
[<ffffffc000741e58>] regmap_swr_read+0xd8/0x11c
[<ffffffc00073a350>] _regmap_raw_read+0x210/0x314
[<ffffffc00073a4b0>] _regmap_bus_read+0x5c/0xb4
[<ffffffc000739548>] _regmap_read+0xe0/0x1ec
[<ffffffc0007396b8>] regmap_read+0x64/0xa8
[<ffffffc000dc9dd4>] snd_soc_component_read+0x34/0x70
[<ffffffc000dc9f44>] snd_soc_read+0x6c/0x94
Memory state around the buggy address:
ffffffc089871780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffffc089871800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Change-Id: I3c56dffb4ca197e8fc23d54a44282a60254dd001
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
|
|
In soundwire control drivers, some pointers are not
set as NULL after the memory is freed, which will
leave many dangling pointers. Set them to NULL
explicitly to avoid potential risk.
CRs-Fixed: 997062
Change-Id: I18bd73397173187f87af28c78564835eed6d6a10
Signed-off-by: Meng Wang <mwang@codeaurora.org>
|
|
Fix NULL pointer dereference in soundwire master controller
driver.
CRs-fixed: 1018329
Change-Id: I716401adda144ac0c03520f747694eaa50ea8e51
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
|
|
Copy speaker configuration from active to inactive bank
and perform bank switch operation while speaker channels
are getting enabled or disabled. This will make sure that
soundwire banks are always in sync and allow independent
control of speaker channels.
CRs-fixed: 1007465
Change-Id: Ic1653194c22fa5669b1c04fd9630158633fb00a5
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
|
|
Handle soundwire slave devices ungroup in master controller.
Set the group device id to 0 when soundwire slave devices
request ungroup for independent control.
CRs-fixed: 1007465
Change-Id: I4f1b39dac949aa3f6aa3abb12ff0310fb0e98d1c
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
|
|
Add soundwire API to remove the soundwire slave devices
from group so that the devices can be controlled
independently as required.
CRs-fixed: 1007465
Change-Id: Ibca3e33c0e85629ae5ce121e75526f4786d6408a
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
|
|
Add support for 48x2 frame structure in soundwire
so that when slave device data path is not enabled,
all control messaging will happen with 48x2 frame.
Soundwire slave devices send an explicit request to
enable data path which in turn change the frame
structure to 48x16.
CRs-fixed: 996586
Change-Id: Ia4329ac982eb2a29a2b925897cd87ca9711c30e3
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
|
|
Add soundwire API to control slave device data path
enable or disable. This gives slave device drivers
more flexibility for data path control during device
path enablement.
CRs-fixed: 996586
Change-Id: Ic0ab015098035418458a5ba7c2ffad9df20f933c
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
|
|
There is a possible race condition that runtime suspend is being
called after device path bringup. To avoid this race condition,
add a mutex lock during device path bringup to serialize runtime
suspend and resume.
CRs-Fixed: 967442
Change-Id: I268a25b05799c66fc019e19e46939286e54fb514
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
|
|
Set the group id to default when number of channels are less
than or equal to one. This change will configure the group
id correctly during device switch scenarios.
CRs-Fixed: 961023
Change-Id: I2cb4447b36fef111ed1f9b8991b3882b8d57f6a7
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
|
|
Fix NULL pointer check while setting group ID to avoid
dereferening of the pointer.
CRs-Fixed: 971240
Change-Id: Ic5aae901244e7b2b96a894d265a6cc5c119f0367
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
|
|
Slave synchronization is needed to sync frame shape consisting
of different ports with different sample rates. Change sets
the slave synchronization based on the frame shape.
Change-Id: Iae726555b3c158394662c590d1ebc781ff7f54f5
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
|
|
Use soundwire broadcast command for configuration of all slave
devices simultaneously. This change improves latency during
slave devices configuration.
Change-Id: Ie2985e444e4aa1128856dc6ae372f8f4cca943de
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
|
|
Devices with the same group id or broadcast command can be
configured simultaneously. This will help improve the latency
during device configuration. Add support to use group id
for slave device configuration.
Change-Id: I5e86e61a0b5223de6c6471f3f342fe1f387d81ef
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
|
|
Soundwire hardware has two banks for configuring soundwire
slave ports. After playback is stopped, disable soundwire slave
ports in both banks to avoid any port collisions during the start
of next playback on other slave device.
Change-Id: I5cfd1d985a1ca5fd7b4020d7e14697642f207501
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
|
|
Audio codec driver changes for kernel 4.4.
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
|
|
Add snapshot of audio codec drivers for MSM targets. The
code is migrated from msm-3.18 kernel at the below commit/AU level-
AU_LINUX_ANDROID_LA.HB.1.3.1.06.00.00.187.056
(e70ad0cd5efdd9dc91a77dcdac31d6132e1315c1)
(Promotion of kernel.lnx.3.18-151201.)
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
|