| Age | Commit message (Collapse) | Author |
|---|
|
The query results are valid until the next PM_SUSPEND_PREPARE.
(cherry picked from commit 76543de14f860ab713114621cb62e8006b7ca952)
Change-Id: I6bc2bd47c830262319576a001d39ac9a994916cf
Signed-off-by: Iliyan Malchev <malchev@google.com>
|
|
Have the qpnpint_irq_set_type function clear unwanted high/low
trigger bits when updating the interrupt flags.
Change-Id: Ie55d6178ea94350ecf8c79714cb863ea63d76ea6
Signed-off-by: Yimin Peng <yiminp@codeaurora.org>
|
|
Add interrupt support for virtual SPMI front-end driver. It will co-work
with backend to serve interrupts of GPIOs and VADC on PMIC.
Change-Id: I7404b18b553f58c8a645a0e300633828de41cfb3
Signed-off-by: Yimin Peng <yiminp@codeaurora.org>
|
|
When the bytes count required by SPMI clients is 8, read and write
fail. This was observed when PMIC MPPs initialized. Fix this by
adding bytes count restore in cmd formation as read and write process.
Change-Id: I56dbbc0b8e99727c29ddae568ce6f17195888b4a
Signed-off-by: Yimin Peng <yiminp@codeaurora.org>
|
|
Add basic infrastructure for SPMI front end driver. Frontend driver
communicates with backend to service SPMI request from clients.
Change-Id: Icff567a2f224fb49f370bf760287d9d3615a3325
Signed-off-by: Yimin Peng <yiminp@codeaurora.org>
|
|
* refs/heads/tmp-9f764bb
Linux 4.4.80
ASoC: dpcm: Avoid putting stream state to STOP when FE stream is paused
scsi: snic: Return error code on memory allocation failure
scsi: fnic: Avoid sending reset to firmware when another reset is in progress
HID: ignore Petzl USB headlamp
ALSA: usb-audio: test EP_FLAG_RUNNING at urb completion
sh_eth: enable RX descriptor word 0 shift on SH7734
nvmem: imx-ocotp: Fix wrong register size
arm64: mm: fix show_pte KERN_CONT fallout
vfio-pci: Handle error from pci_iomap
video: fbdev: cobalt_lcdfb: Handle return NULL error from devm_ioremap
perf symbols: Robustify reading of build-id from sysfs
perf tools: Install tools/lib/traceevent plugins with install-bin
xfrm: Don't use sk_family for socket policy lookups
tools lib traceevent: Fix prev/next_prio for deadline tasks
Btrfs: adjust outstanding_extents counter properly when dio write is split
usb: gadget: Fix copy/pasted error message
ACPI / scan: Prefer devices without _HID/_CID for _ADR matching
ARM: s3c2410_defconfig: Fix invalid values for NF_CT_PROTO_*
ARM64: zynqmp: Fix i2c node's compatible string
ARM64: zynqmp: Fix W=1 dtc 1.4 warnings
dmaengine: ti-dma-crossbar: Add some 'of_node_put()' in error path.
dmaengine: ioatdma: workaround SKX ioatdma version
dmaengine: ioatdma: Add Skylake PCI Dev ID
openrisc: Add _text symbol to fix ksym build error
irqchip/mxs: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL
spi: dw: Make debugfs name unique between instances
ASoC: tlv320aic3x: Mark the RESET register as volatile
irqchip/keystone: Fix "scheduling while atomic" on rt
vfio-pci: use 32-bit comparisons for register address for gcc-4.5
drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set
drm/msm: Ensure that the hardware write pointer is valid
net/mlx4: Remove BUG_ON from ICM allocation routine
ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output
ARM: dts: n900: Mark eMMC slot with no-sdio and no-sd flags
r8169: add support for RTL8168 series add-on card.
x86/mce/AMD: Make the init code more robust
tpm: Replace device number bitmap with IDR
tpm: fix a kernel memory leak in tpm-sysfs.c
xen/blkback: don't use xen_blkif_get() in xen-blkback kthread
xen/blkback: don't free be structure too early
sched/cputime: Fix prev steal time accouting during CPU hotplug
net: skb_needs_check() accepts CHECKSUM_NONE for tx
pstore: Use dynamic spinlock initializer
pstore: Correctly initialize spinlock and flags
pstore: Allow prz to control need for locking
vlan: Propagate MAC address to VLANs
/proc/iomem: only expose physical resource addresses to privileged users
Make file credentials available to the seqfile interfaces
v4l: s5c73m3: fix negation operator
dentry name snapshots
ipmi/watchdog: fix watchdog timeout set on reboot
libnvdimm, btt: fix btt_rw_page not returning errors
RDMA/uverbs: Fix the check for port number
PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
sched/cgroup: Move sched_online_group() back into css_online() to fix crash
kaweth: fix oops upon failed memory allocation
kaweth: fix firmware download
mpt3sas: Don't overreach ioc->reply_post[] during initialization
mailbox: handle empty message in tx_tick
mailbox: skip complete wait event if timer expired
mailbox: always wait in mbox_send_message for blocking Tx mode
wil6210: fix deadlock when using fw_no_recovery option
ath10k: fix null deref on wmi-tlv when trying spectral scan
isdn/i4l: fix buffer overflow
isdn: Fix a sleep-in-atomic bug
net: phy: Do not perform software reset for Generic PHY
nfc: fdp: fix NULL pointer dereference
xfs: don't BUG() on mixed direct and mapped I/O
perf intel-pt: Ensure never to set 'last_ip' when packet 'count' is zero
perf intel-pt: Use FUP always when scanning for an IP
perf intel-pt: Fix last_ip usage
perf intel-pt: Fix ip compression
drm: rcar-du: Simplify and fix probe error handling
drm: rcar-du: Perform initialization/cleanup at probe/remove time
drm/rcar: Nuke preclose hook
Staging: comedi: comedi_fops: Avoid orphaned proc entry
Revert "powerpc/numa: Fix percpu allocations to be NUMA aware"
KVM: PPC: Book3S HV: Save/restore host values of debug registers
KVM: PPC: Book3S HV: Reload HTM registers explicitly
KVM: PPC: Book3S HV: Restore critical SPRs to host values on guest exit
KVM: PPC: Book3S HV: Context-switch EBB registers properly
drm/nouveau/bar/gf100: fix access to upper half of BAR2
drm/vmwgfx: Fix gcc-7.1.1 warning
md/raid5: add thread_group worker async_tx_issue_pending_all
crypto: authencesn - Fix digest_null crash
powerpc/pseries: Fix of_node_put() underflow during reconfig remove
net: reduce skb_warn_bad_offload() noise
pstore: Make spinlock per zone instead of global
af_key: Add lock to key dump
ANDROID: binder: Don't BUG_ON(!spin_is_locked()).
Linux 4.4.79
alarmtimer: don't rate limit one-shot timers
tracing: Fix kmemleak in instance_rmdir
spmi: Include OF based modalias in device uevent
of: device: Export of_device_{get_modalias, uvent_modalias} to modules
drm/mst: Avoid processing partially received up/down message transactions
drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req()
drm/mst: Fix error handling during MST sideband message reception
RDMA/core: Initialize port_num in qp_attr
ceph: fix race in concurrent readdir
staging: rtl8188eu: add TL-WN722N v2 support
Revert "perf/core: Drop kernel samples even though :u is specified"
perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target
target: Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce
udf: Fix deadlock between writeback and udf_setsize()
NFS: only invalidate dentrys that are clearly invalid.
Input: i8042 - fix crash at boot time
MIPS: Fix a typo: s/preset/present/ in r2-to-r6 emulation error message
MIPS: Send SIGILL for linked branches in `__compute_return_epc_for_insn'
MIPS: Rename `sigill_r6' to `sigill_r2r6' in `__compute_return_epc_for_insn'
MIPS: Send SIGILL for BPOSGE32 in `__compute_return_epc_for_insn'
MIPS: math-emu: Prevent wrong ISA mode instruction emulation
MIPS: Fix unaligned PC interpretation in `compute_return_epc'
MIPS: Actually decode JALX in `__compute_return_epc_for_insn'
MIPS: Save static registers before sysmips
MIPS: Fix MIPS I ISA /proc/cpuinfo reporting
x86/ioapic: Pass the correct data to unmask_ioapic_irq()
x86/acpi: Prevent out of bound access caused by broken ACPI tables
MIPS: Negate error syscall return in trace
MIPS: Fix mips_atomic_set() with EVA
MIPS: Fix mips_atomic_set() retry condition
ftrace: Fix uninitialized variable in match_records()
vfio: New external user group/file match
vfio: Fix group release deadlock
f2fs: Don't clear SGID when inheriting ACLs
ipmi:ssif: Add missing unlock in error branch
ipmi: use rcu lock around call to intf->handlers->sender()
drm/radeon: Fix eDP for single-display iMac10,1 (v2)
drm/radeon/ci: disable mclk switching for high refresh rates (v2)
drm/amd/amdgpu: Return error if initiating read out of range on vram
s390/syscalls: Fix out of bounds arguments access
Raid5 should update rdev->sectors after reshape
cx88: Fix regression in initial video standard setting
x86/xen: allow userspace access during hypercalls
md: don't use flush_signals in userspace processes
usb: renesas_usbhs: gadget: disable all eps when the driver stops
usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL
USB: cdc-acm: add device-id for quirky printer
usb: storage: return on error to avoid a null pointer dereference
xhci: Fix NULL pointer dereference when cleaning up streams for removed host
xhci: fix 20000ms port resume timeout
ipvs: SNAT packet replies only for NATed connections
PCI/PM: Restore the status of PCI devices across hibernation
af_key: Fix sadb_x_ipsecrequest parsing
powerpc/asm: Mark cr0 as clobbered in mftb()
powerpc: Fix emulation of mfocrf in emulate_step()
powerpc: Fix emulation of mcrf in emulate_step()
powerpc/64: Fix atomic64_inc_not_zero() to return an int
iscsi-target: Add login_keys_workaround attribute for non RFC initiators
scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails.
PM / Domains: Fix unsafe iteration over modified list of domain providers
PM / Domains: Fix unsafe iteration over modified list of device links
ASoC: compress: Derive substream from stream based on direction
wlcore: fix 64K page support
Bluetooth: use constant time memory comparison for secret values
perf intel-pt: Clear FUP flag on error
perf intel-pt: Ensure IP is zero when state is INTEL_PT_STATE_NO_IP
perf intel-pt: Fix missing stack clear
perf intel-pt: Improve sample timestamp
perf intel-pt: Move decoder error setting into one condition
NFC: Add sockaddr length checks before accessing sa_family in bind handlers
nfc: Fix the sockaddr length sanitization in llcp_sock_connect
nfc: Ensure presence of required attributes in the activate_target handler
NFC: nfcmrvl: fix firmware-management initialisation
NFC: nfcmrvl: use nfc-device for firmware download
NFC: nfcmrvl: do not use device-managed resources
NFC: nfcmrvl_uart: add missing tty-device sanity check
NFC: fix broken device allocation
ath9k: fix tx99 bus error
ath9k: fix tx99 use after free
thermal: cpu_cooling: Avoid accessing potentially freed structures
s5p-jpeg: don't return a random width/height
ir-core: fix gcc-7 warning on bool arithmetic
disable new gcc-7.1.1 warnings for now
sched/fair: Add a backup_cpu to find_best_target
sched/fair: Try to estimate possible idle states.
sched/fair: Sync task util before EAS wakeup
Revert "sched/fair: ensure utilization signals are synchronized before use"
sched/fair: kick nohz idle balance for misfit task
sched/fair: Update signals of nohz cpus if we are going idle
events: add tracepoint for find_best_target
sched/fair: streamline find_best_target heuristics
UPSTREAM: af_key: Fix sadb_x_ipsecrequest parsing
ANDROID: lowmemorykiller: Add tgid to kill message
Revert "proc: smaps: Allow smaps access for CAP_SYS_RESOURCE"
Conflicts:
drivers/gpu/drm/msm/adreno/adreno_gpu.c
drivers/gpu/drm/msm/msm_ringbuffer.c
drivers/staging/android/lowmemorykiller.c
kernel/sched/fair.c
Change-Id: Ic3b3a522b79b1deb178e513b56b9c39eea48e079
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
|
|
commit d50daa2af2618dab6d21634e65a5fbcf4ae437d6 upstream.
Include the OF-based modalias in the uevent sent when registering SPMI
devices, so that user space has a chance to autoload the kernel module
for the device.
Tested-by: Rob Clark <robdclark@gmail.com>
Reported-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check that the apid for an SPMI interrupt falls between the
min_apid and max_apid that can be handled by the APPS processor
before invoking the per-apid interrupt handler:
periph_interrupt().
This avoids an access violation in rare cases where the status
bit is set for an interrupt that is not owned by the APPS
processor.
Change-Id: Ib74cb4ae7be9849f0243659bb4c1435340e1e087
Signed-off-by: David Collins <collinsd@codeaurora.org>
|
|
Current implementation of SPMI arbiter dispatches interrupt based on the
Arbiter's accumulator status, in some cases the accumulator status may
remain zero and the interrupt remains un-handled. Add logic to dispatch
interrupts based Arbiter's IRQ status if the accumulator status is zero.
CRs-Fixed: 2934741
Change-Id: I068f5c7d33758063878721d7cce1308fa803e3bd
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
|
|
Do not keep the channel reserved for debug port in the
ppid to apid mapping table. This is to avoid accessing
that particular channel during the read/write/irq operations.
Change-Id: I8f49d1d87978a5b68ea711d3e30606d72fd09f73
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
|
|
Currently, cleanup_irq() is invoked when a peripheral's interrupt
fires and there is no mapping present in the interrupt domain of
spmi interrupt controller.
The cleanup_irq clears the arbiter bit, clears the pmic interrupt
and disables it at the pmic in that order. The last disable in
cleanup_irq races with request_irq() in that it stomps over the
enable issued by request_irq. Fix this by not writing to the pmic
in cleanup_irq. The latched bit will be left set in the pmic,
which will not send us more interrupts even if the enable bit
stays enabled.
When a client wants to request an interrupt, use the activate
callback on the irq_domain to clear latched bit. This ensures
that the latched, if set due to the above changes in cleanup_irq
or when the bootloader leaves it set, gets cleaned up, paving way
for upcoming interrupts to trigger.
With this, there is a possibility of unwanted triggering of
interrupt right after the latched bit is cleared - the interrupt
may be left enabled too. To avoid that, clear the enable first
followed by clearing the latched bit in the activate callback.
Change-Id: If126d6f6cdf6c944ca513c53a71a91e225ee63e2
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
|
|
If the test 'if (channel > 5)' is true, then we will return 'err' which
is known to be 0 at this point.
Return -EINVAL instead.
Change-Id: I4f558ffb9cde0c9c1127202cd8b5d3ff11987c86
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: e98cc182a06af3b8e91d6d719708db07045d78c4
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: David Collins <collinsd@codeaurora.org>
|
|
Change file permissions S_IRUSR and S_IWUSR to their octal
equivalents: 0400 and 0200 respectively. This makes the code
easier to understand and avoids a checkpatch warning.
Change-Id: I00a8b81533367544e94a464fde8373fb5be544bd
Signed-off-by: David Collins <collinsd@codeaurora.org>
|
|
Add support for version 5 of the SPMI PMIC arbiter. It utilizes
different offsets for registers than those found on version 3.
Also, the procedure to determine if writing and IRQ access is
allowed for a given PPID changes for version 5.
Change-Id: I12b5b11c6fe47b4becf668bcca0abadfef72b8df
CRs-Fixed: 1047281
Signed-off-by: David Collins <collinsd@codeaurora.org>
|
|
show_resume_irq is used to debug interrupts that cause wakeup.
Support it for spmi arbiter's interrupt controller.
Change-Id: I52d51c09d7ff316248542c84a1cd65a28e2283da
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
If "core" memory resource is not specified, the driver could end up
dereferencing a null pointer.
Fix this by returning -EINVAL when core resource is missing.
Change-Id: Id08f7b2e109b6b2963b19dfe07f07cbfb424202b
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
Version 3 of the SPMI PMIC arbiter supports up to 512 APIDs.
However, the APID value is currently stored in u8 variables
throughout the spmi-pmic-arb driver. Change the type of these
variables to be u16 so that APIDs 256-511 are not truncated.
Also update the out_hwirq value packing in order to support
more than 8 bits for APIDs.
Change-Id: If2408bc4678b2e0f7e2366329be005cd652661cf
CRs-Fixed: 1045396
Signed-off-by: David Collins <collinsd@codeaurora.org>
|
|
|
|
The v3 arbiter removes the security checks and moves them to SMMU
drivers outside the scope of this driver. So reset the mode call
back for v3 similar to v1.
Change-Id: I043178382cd90515063d09f526bd3e94f8ed5fc3
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
Currently the SPMI interrupt will not wake the device. Enable this
interrupt as a wakeup source.
CRs-Fixed: 1030478
Change-Id: Ic780118b7b38a0679f5d5037e404069aa1f2be0a
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
|
|
The driver currently invokes the apid handler (periph_handler()) once it
sees that the summary status bit for that apid is set.
However the hardware is designed to set that bit even if the apid
interrupts are disabled. The driver should check whether the apid is
indeed enabled before calling the apid handler.
CRs-Fixed: 1001770
Change-Id: I1415c41ec99ca4b767392ea3443691760f967953
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
The cleanup_irq() was meant to clear and mask interrupts that were
left enabled in the hardware but there was no interrupt handler
registered for it. Add an error print when it gets invoked.
CRs-Fixed: 1001770
Change-Id: Iccf0daadeb82b0fca29829424439ac225e2b3b88
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
The current code uses handle_level_irq flow handler even if the trigger
type of the interrupt is edge. This can lead to missing of an edge
transition that happens when the interrupt is being handled. The level
flow handler masks the interrupt while it is being handled, so if an edge
transition happens at that time, that edge is lost.
Use an edge flow handler for edge type interrupts which ensures that the
interrupt stays enabled while being handled - at least until it triggers
at which point the flow handler sets the IRQF_PENDING flag and only then
masks the interrupt. That IRQF_PENDING state indicates an edge transition
happened while the interrupt was being handled and the handler is called
again.
CRs-Fixed: 1001770
Change-Id: Id2554c9e6ed79188fa1b64728be464bda45f07ec
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
This reverts commit 3b1bda734da2 ("spmi: pmic_arb: use
handle_fasteoi_irq handler")
PMIC interrupt are not aligned to be used as fasteoi, this
is because
* most of the PMIC interrupts are threaded and are configured as
ONESHOT. Fasteoi handlers do not support ONESHOT semantics
* There is a chance of losing edge interrupts that trigger while
the handler is running. This is because fasteoi handler signals
EOI after the handler is run. So edge interrupts that trigger
while the handler is running get acknowledged without being
handled.
CRs-Fixed: 1001770
Change-Id: I622fd971201b6c0001212a696c3d12aea409c11b
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
PMIC bus arbiter v3 supports 512 SPMI peripherals. Add the v3 operators to
support this new arbiter version.
CRs-Fixed: 1001770
Change-Id: Ic36b8e3c01af2fde1827a53c8c52baed240c238e
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
|
|
The interrupt controller uses level handler for all its interrupt.
The hardware irq controller confirms to the fasteoi handler type in
that it rearms itself when acknowledged. There is no need to
additionally mask the interrupt while being handled.
Use fasteoi handler type for pmic interrupts. Since fasteoi needs
an irq_eoi callback, use the same function used for irq_ack.
Change-Id: I9a941d8b56ad5698da38e16b2afcf87ef920ebfd
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
The current driver ensures that no read/write transaction is in progress
while it makes changes to the interrupt regions. This is not necessary
because read/writes over spmi and arbiter interrupt control are
independent operations.
Change-Id: Id6a93eed0aabe55a4b655a2050c31b48327dffe4
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
The interrupt controller code in the arbiter disables
the peripheral accumulated interrupt (ACC) bit when none of the
interrupts in the peripheral is enabled.
This is not required since the controller disables the interrupt
at the pmic.
So leave the ACC bit enabled while masking an interrupt. Also
ensure that the ACC bit is enabled while unmasking an interrupt.
There is no issues with enabling ACC bit if it were already enabled.
Change-Id: Idbea562157e65a4dfe0c51b7a25eed5ce000068d
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
Being able to write to spmi registers via userspace is required
for quick debug and development. Enable it.
The regmap framework uses dev_name to create debugfs dir names.
So update the spmi devices to have proper names.
Change-Id: I8a5da203b212df9a7f1410e3fcf6ee7b429856b6
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
struct pmic_arb_irq_spec serves no real purpose. It is used only
in the translate function and the code is much cleaner without it.
Change-Id: I4daae954b8e01b33a9c7f5a343a31c15b4787382
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
PMIC interrupts each have an internal latched status bit which is
not visible from any register. This status bit is set as soon as
the conditions specified in the interrupt type and polarity
registers are met even if the interrupt is not enabled. When it
is set, nothing else changes within the PMIC and no interrupt
notification packets are sent. If the internal latched status
bit is set when an interrupt is enabled, then the value is
immediately propagated into the interrupt latched status register
and an interrupt notification packet is sent out from the PMIC
over SPMI.
This PMIC hardware behavior can lead to a situation where the
handler for a level triggered interrupt is called immediately
after enable_irq() is called even though the interrupt physically
triggered while it was disabled within the genirq framework.
This situation takes place if the the interrupt fires twice after
calling disable_irq(). The first time it fires, the level flow
handler will mask and disregard it. Unfortunately, the second
time it fires, the internal latched status bit is set within the
PMIC and no further notification is received. When enable_irq()
is called later, the interrupt is unmasked (enabled in the PMIC)
which results in the PMIC immediately sending an interrupt
notification packet out over SPMI. This breaks the semantics
of level triggered interrupts within the genirq framework since
they should be completely ignored while disabled.
The PMIC internal latched status behavior also affects how
interrupts are treated during suspend. While entering suspend,
all interrupts not specified as wakeup mode are masked. Upon
resume, these interrupts are unmasked. Thus if any of the
non-wakeup PMIC interrupts fired while the system was suspended,
then the PMIC will send interrupt notification packets out via
SPMI as soon as they are unmasked during resume. This behavior
violates genirq semantics as well since non-wakeup interrupts
should be completely ignored during suspend.
Modify the qpnpint_irq_unmask() function so that the interrupt
latched status clear register is written immediately before the
interrupt enable register. This clears the internal latched
status bit of the interrupt so that it cannot trigger spuriously
immediately upon being enabled.
Also, while resuming an irq, an unmask could be called even if it
was not previously masked. So, before writing these registers,
check if the interrupt is already enabled within the PMIC. If it
is, then no further register writes are required. This
condition check ensures that a valid latched status register bit
is not cleared until it is properly handled.
Change-Id: Ie05845b692a151c39943aa3e2aad6bcae4194d83
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
irq_enable which is called when the device resumes. Note that the
irq_enable is called regardless of whether the interrupt was
marked enabled/disabled in the descriptor or whether it was
masked/unmaked at the controller while resuming.
The current driver unconditionally clears the interrupt in its
irq_enable callback. This is dangerous as any interrupts that
happen right before the resume could be missed.
Remove the irq_enable callback and use mask/unmask instead.
Change-Id: I58695ae0c4905a699003d35498dc36c2a947f3f0
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
We see a unmapped irqs trigger right around bootup. This could
likely be because the bootloader exited leaving the interrupts
in an unknown or unhandled state. Ack and mask the interrupt
if one is found. A request_irq later will unmask it and also
setup proper mapping structures.
Change-Id: Icc2fc4f1bd9b3333e5856fce2daa5ba2b69e9a87
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
The current driver disables/enables the ACC bit when any interrupt
in that peripheral is being masked or unmasked.
However, the ACC bits were meant to be disabled and enabled when
all interrupts in that peripheral are disabled and any interrupts in
it are enabled respt.
The driver ends up masking the peripheral (i.e. all the interrupts
in that peripheral) if any one interrupt in that peripheral is masked.
There could be other interrupts enabled which will not trigger after this.
Fix this by changing the driver to disable or enable when all the
interrupts in the peripheral are disabled or when the first enable of an
interrupt in that peripheral happens.
Note that we will need to keep track of the enabled interrupts for an
apid. There are other things like ppid and owner information tracked per
apid. Introduce a per apid structure to track all the three.
Change-Id: I256546a7a4683a463beb6d0eb360a0edd4e5c11d
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
The current driver uses a mix of radix tree and a fwd lookup
table to translate between apid and ppid. It is buggy and confusing.
Instead simply use a radix tree for v1 hardware and use the
forward lookup table for v2.
Change-Id: I74e1dc0c3dbbf2b311786af7d80a9d4810d510d7
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
The driver currently uses "apid" and "chan" to mean apid. Remove
the use of chan and use only apid.
On a SPMI bus there is allocation to manage up to 4K peripherals.
However, in practice only few peripherals are instantiated
and only few among the instantiated ones actually interrupt.
APID is CPU's way of keeping track of peripherals that could interrupt.
There is a table that maps the 256 interrupting peripherals to
a number between 0 and 255. This number is called APID.Information about
that interrupting peripheral is stored in registers offset by its
corresponding number between 0 and 255.
Change-Id: Icdb82da24232a5382ed03b7437c3207db1befa94
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
Usually *_dev best used for structures that embed a struct device in
them. spmi_pmic_arb_dev doesn't embed one. It is simply a driver data
structure. Use an appropriate name for it.
Change-Id: I432eeb0273cac78638440cd00c64cc568ccd68c5
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
There are many places in the driver that left shift the bit to
generate a bit mask. It is simpler to use BIT() macro.
Change-Id: I05ac8469304458a0f26aafd1292fcbb65d312f0a
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
The system crashes due to bad access when reading from an non configured
peripheral and when writing to peripheral which is not owned by current
ee. This patch verifies ownership to avoid crashing on
write.
For reads, since the forward mapping table, data_channel->ppid, is
towards the end of the block, we use the core size to figure the
max number of ppids supported. The table starts at an offset of 0x800
within the block, so size - 0x800 will give us the area used by the
table. Since each table is 4 bytes long (core_size - 0x800) / 4 will
gives us the number of data_channel supported.
This new protection is functional on hw v2.
Change-Id: I74e3452963a7dda9a8c8aaef76de3117cabc454b
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
Add support for more than 128 peripherals by taking a lazy
caching approach to the mapping tables. Instead of reading and
caching the tables at boot given some fixed size, read them and
cache them on an as needed basis. We still assume a max size of
512 peripherals, trading off some space for simplicity.
Based on a patch by Gilad Avidov <gavidov@codeaurora.org> and
Sagar Dharia <sdharia@codeaurora.org>.
Change-Id: I90ae4100195eef3303b3d6501d3c3ffdbce085b7
Cc: Gilad Avidov <gavidov@codeaurora.org>
Cc: Sagar Dharia <sdharia@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
The spmi arbiter device spawns spmi_devices which in turn spawn
platform_devices for pmic peripherals.
Move the arbiter's driver init to arch_initcall so that the subsequent
devices it spawns get instantiated earlier.
Change-Id: Ib96937f274745549ee86f758673aab4db97acbaf
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver update for 4.4-rc1. Lots of
different driver and subsystem updates, hwtracing being the largest
with the addition of some new platforms that are now supported. Full
details in the shortlog.
All of these have been in linux-next for a long time with no reported
issues"
* tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits)
fpga: socfpga: Fix check of return value of devm_request_irq
lkdtm: fix ACCESS_USERSPACE test
mcb: Destroy IDA on module unload
mcb: Do not return zero on error path in mcb_pci_probe()
mei: bus: set the device name before running fixup
mei: bus: use correct lock ordering
mei: Fix debugfs filename in error output
char: ipmi: ipmi_ssif: Replace timeval with timespec64
fpga: zynq-fpga: Fix issue with drvdata being overwritten.
fpga manager: remove unnecessary null pointer checks
fpga manager: ensure lifetime with of_fpga_mgr_get
fpga: zynq-fpga: Change fw format to handle bin instead of bit.
fpga: zynq-fpga: Fix unbalanced clock handling
misc: sram: partition base address belongs to __iomem space
coresight: etm3x: adding documentation for sysFS's cpu interface
vme: 8-bit status/id takes 256 values, not 255
fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000
ARM: zynq: dt: Updated devicetree for Zynq 7000 platform.
ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager.
ver_linux: proc/modules, limit text processing to 'sed'
...
|
|
The struct irq_domain contains a "struct device_node *" field
(of_node) that is almost the only link between the irqdomain
and the device tree infrastructure.
In order to prepare for the removal of that field, convert all
users to use irq_domain_get_of_node() instead.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Graeme Gregory <graeme@xora.org.uk>
Cc: Jake Oshins <jakeo@microsoft.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Link: http://lkml.kernel.org/r/1444737105-31573-2-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Silences this static checker warning:
drivers/spmi/spmi-pmic-arb.c:363
pmic_arb_write_cmd() warn: always true condition
'(opc <= 255) => (0-255 <= 255)'
Cc: Andy Gross <agross@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We don't want to swap bytes that we're reading and writing to the
FIFOs when we're running on a big-endian CPU. Doing so causes
problems like where the qcom-spmi-iadc driver can't detect the
type of device because the bytes are all mixed up. Use the raw IO
accessors for these API instead, and collapse pmic_arb_base_read()
into the byte reading API so that we aren't tempted to read non-FIFO
data like commands with that function.
Cc: Andy Gross <agross@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Populate the owner field of the spmi driver when
spmi_driver_register() is called in a similar fashion to how
other *_driver_register() functions do it. This saves driver
writers from having to do this themselves.
Cc: Andy Gross <agross@codeaurora.org>
Cc: Gilad Avidov <gavidov@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.
Remove the argument.
Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This updated pull request does not contain the last few GIC related
patches which were reported to cause a regression. There is a fix
available, but I let it breed for a couple of days first.
The irq departement provides:
- new infrastructure to support non PCI based MSI interrupts
- a couple of new irq chip drivers
- the usual pile of fixlets and updates to irq chip drivers
- preparatory changes for removal of the irq argument from interrupt
flow handlers
- preparatory changes to remove IRQF_VALID"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources
irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2
irqchip: Add documentation for the bcm2836 interrupt controller
irqchip/bcm2835: Add support for being used as a second level controller
irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ
PCI: xilinx: Fix typo in function name
irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance
irqchip/gic: Only allow the primary GIC to set the CPU map
PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove
unicore32/irq: Prepare puv3_gpio_handler for irq argument removal
tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal
m68k/irq: Prepare irq handlers for irq argument removal
C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal
blackfin: Prepare irq handlers for irq argument removal
arc/irq: Prepare idu_cascade_isr for irq argument removal
sparc/irq: Use access helper irq_data_get_affinity_mask()
sparc/irq: Use helper irq_data_get_irq_handler_data()
parisc/irq: Use access helper irq_data_get_affinity_mask()
mn10300/irq: Use access helper irq_data_get_affinity_mask()
irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal
...
|
|
IRQ_DOMAIN is a hidden config option, so depending on it doesn't
make any sense. Select the config option because it's required to
compile this driver.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reviewed-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Tested-by: Tim Bird <tim.bird@sonymobile.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
