summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2008-07-16Merge commit 'origin/master'Benjamin Herrenschmidt
Manual merge of: arch/powerpc/Kconfig arch/powerpc/kernel/stacktrace.c arch/powerpc/mm/slice.c arch/ppc/kernel/smp.c
2008-07-15Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (56 commits) i2c: Add detection capability to new-style drivers i2c: Call client_unregister for new-style devices too i2c: Clean up old chip drivers i2c-ibm_iic: Register child nodes i2c: New-style EEPROM driver using device IDs i2c: Export the i2c_bus_type symbol i2c-au1550: Fix PM support i2c-dev: Delete empty detach_client callback i2c: Drop stray references to lm_sensors i2c: Check for ACPI resource conflicts i2c-ocores: basic PM support i2c-sibyte: SWARM I2C board initialization i2c-i801: Fix handling of error conditions i2c-i801: Rename local variable temp to status i2c-i801: Properly report bus arbitration loss i2c-i801: Remove verbose debugging messages i2c-algo-pcf: Drop unused struct members i2c-algo-pcf: Multi-master lost-arbitration improvement i2c: Deprecate the legacy gpio drivers i2c-pxa: Initialize early ...
2008-07-15Merge commit '85082fd7cbe3173198aac0eb5e85ab1edcc6352c' into test-buildBenjamin Herrenschmidt
Manual fixup of: arch/powerpc/Kconfig
2008-07-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (241 commits) [ARM] 5171/1: ep93xx: fix compilation of modules using clocks [ARM] 5133/2: at91sam9g20 defconfig file [ARM] 5130/4: Support for the at91sam9g20 [ARM] 5160/1: IOP3XX: gpio/gpiolib support [ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits. [ARM] 5084/1: zylonite: Register AC97 device [ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model [ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers [ARM] 5147/1: pxaficp_ir: drop pxa_gpio_mode calls, as pin setting [ARM] 5145/1: PXA2xx: provide api to control IrDA pins state [ARM] 5144/1: pxaficp_ir: cleanup includes [ARM] pxa: remove pxa_set_cken() [ARM] pxa: allow clk aliases [ARM] Feroceon: don't disable BPU on boot [ARM] Orion: LED support for HP mv2120 [ARM] Orion: add RD88F5181L-FXO support [ARM] Orion: add RD88F5181L-GE support [ARM] Orion: add Netgear WNR854T support [ARM] s3c2410_defconfig: update for current build [ARM] Acer n30: Minor style and indentation fixes. ...
2008-07-14[ARM] Merge most of the PXA work for initial mergeRussell King
This includes PXA work up to the SPI changes for the initial merge, since e172274ccc55d20536fbdceb6131f38e288541e0 depends on the SPI tree being merged. Conflicts: arch/arm/configs/em_x270_defconfig arch/arm/configs/xm_x270_defconfig
2008-07-14Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6Linus Torvalds
* 'bkl-removal' of git://git.lwn.net/linux-2.6: (146 commits) IB/umad: BKL is not needed for ib_umad_open() IB/uverbs: BKL is not needed for ib_uverbs_open() bf561-coreb: BKL unneeded for open() Call fasync() functions without the BKL snd/PCM: fasync BKL pushdown ipmi: fasync BKL pushdown ecryptfs: fasync BKL pushdown Bluetooth VHCI: fasync BKL pushdown tty_io: fasync BKL pushdown tun: fasync BKL pushdown i2o: fasync BKL pushdown mpt: fasync BKL pushdown Remove BKL from remote_llseek v2 Make FAT users happier by not deadlocking x86-mce: BKL pushdown vmwatchdog: BKL pushdown vmcp: BKL pushdown via-pmu: BKL pushdown uml-random: BKL pushdown uml-mmapper: BKL pushdown ...
2008-07-14Merge commit 'v2.6.26' into bkl-removalJonathan Corbet
2008-07-14Merge branch 'x86/for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (821 commits) x86: make 64bit hpet_set_mapping to use ioremap too, v2 x86: get x86_phys_bits early x86: max_low_pfn_mapped fix #4 x86: change _node_to_cpumask_ptr to return const ptr x86: I/O APIC: remove an IRQ2-mask hack x86: fix numaq_tsc_disable calling x86, e820: remove end_user_pfn x86: max_low_pfn_mapped fix, #3 x86: max_low_pfn_mapped fix, #2 x86: max_low_pfn_mapped fix, #1 x86_64: fix delayed signals x86: remove conflicting nx6325 and nx6125 quirks x86: Recover timer_ack lost in the merge of the NMI watchdog x86: I/O APIC: Never configure IRQ2 x86: L-APIC: Always fully configure IRQ0 x86: L-APIC: Set IRQ0 as edge-triggered x86: merge dwarf2 headers x86: use AS_CFI instead of UNWIND_INFO x86: use ignore macro instead of hash comment x86: use matching CFI_ENDPROC ...
2008-07-14i2c: Let framebuffer drivers set their I2C bus class to DDCJean Delvare
Let framebuffer drivers set their I2C bus class to DDC. Once this is done, we will be able to tell the eeprom driver to only probe for EDID EEPROMs on these buses. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14Merge commit 'v2.6.26' into x86/coreIngo Molnar
2008-07-14Merge commit 'origin/HEAD' into test-mergeBenjamin Herrenschmidt
Manual fixup of include/asm-powerpc/pgtable-ppc64.h
2008-07-14drm: reorganise drm tree to be more future proof.Dave Airlie
With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-12fbdev: bugfix for multiprocess defioJaya Kumar
This patch is a bugfix for how defio handles multiple processes manipulating the same framebuffer. Thanks to Bernard Blackham for identifying this bug. It occurs when two applications mmap the same framebuffer and concurrently write to the same page. Normally, this doesn't occur since only a single process mmaps the framebuffer. The symptom of the bug is that the mapping applications will hang. The cause is that defio incorrectly tries to add the same page twice to the pagelist. The solution I have is to walk the pagelist and check for a duplicate before adding. Since I needed to walk the pagelist, I now also keep the pagelist in sorted order. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Bernard Blackham <bernard@largestprime.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-12Merge branch 'linus' into x86/coreIngo Molnar
Conflicts: arch/x86/mm/ioremap.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, move definitionsIngo Molnar
move the SGIVW definitions from setup_arch.h into its own header file. preparation for turning VISWS into a generic PC architecture. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09Merge branches 'pxa-misc', 'pxa-pwm' and 'pxa-multi' into pxaRussell King
2008-07-08Fix broken fix for fsl-diu-dbTakashi Iwai
On 2.6.26-rc9, the commit 05946bce839b4fed5442dbfab77060fb75e051f3 ("fsl_diu_fb: fix build with CONFIG_PM=y, plus fix some warnings") breaks its previous fix f969c5672b16b857e5231ad3c78f08d8ef3305aa ("fsl-diu-db: compile fix") This patch reverts the broken part. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-08Merge branches 'x86/numa-fixes', 'x86/apic', 'x86/apm', 'x86/bitops', ↵Ingo Molnar
'x86/build', 'x86/cleanups', 'x86/cpa', 'x86/cpu', 'x86/defconfig', 'x86/gart', 'x86/i8259', 'x86/intel', 'x86/irqstats', 'x86/kconfig', 'x86/ldt', 'x86/mce', 'x86/memtest', 'x86/pat', 'x86/ptemask', 'x86/resumetrace', 'x86/threadinfo', 'x86/timers', 'x86/vdso' and 'x86/xen' into x86/devel
2008-07-07[ARM] 5118/1: pxafb: add exit and remove handlersJaya Kumar
This patch adds exit and remove handlers to pxafb so that it can be loaded and unloaded as a module. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-04w100fb: add 80 MHz modelinePhilipp Zabel
This is needed for HTC Blueangel (w3200). At 96MHz its screen flickers. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Ian Molton <spyro@f2s.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04w100fb: do not depend on SHARPSLPhilipp Zabel
Apart from Sharp SL-Cxx series, there are a few other devices that have ATI Imageon chips, among them HP iPAQ hx4700. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Ian Molton <spyro@f2s.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04fsl_diu_fb: fix build with CONFIG_PM=y, plus fix some warningsAnton Vorontsov
This patch fixes following build error when CONFIG_PM is set. CC drivers/video/fsl-diu-fb.o drivers/video/fsl-diu-fb.c: In function 'fsl_diu_suspend': drivers/video/fsl-diu-fb.c:1327: error: 'ofdev' undeclared (first use in this function) drivers/video/fsl-diu-fb.c:1327: error: (Each undeclared identifier is reported only once drivers/video/fsl-diu-fb.c:1327: error: for each function it appears in.) drivers/video/fsl-diu-fb.c: In function 'fsl_diu_resume': drivers/video/fsl-diu-fb.c:1337: error: 'ofdev' undeclared (first use in this function) While I'm at it, also fix this warning: drivers/video/fsl-diu-fb.c: In function 'fsl_diu_alloc': drivers/video/fsl-diu-fb.c:314: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'phys_addr_t' And these section mismatches: ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() Also, some sparse fixes: make two functions static, and use NULL where appropriate. There are still a lot of sparse warnings, mainly wrt absence of __iomem annotations, but some will require ugly __force stuff. I'll leave them for now, since proper fix would be not that trivial as few one-liners below. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Timur Tabi <timur@freescale.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: York Sun <yorksun@freescale.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-03[ARM] 5141/1: PWM: pwm_request() should return an PTR_ERR() instead of NULL.Ben Dooks
Make the return of pwm_request() be more informative than just being NULL on error by using PTR_ERR() to respond with an approriate error. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] 5044/1: pwm_bl: add init/notify/exit callbacksPhilipp Zabel
This allows platform code to manipulate GPIOs and brightness level as needed. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] pxa: add generic PWM backlight drivereric miao
Patch mostly from Eric Miao, with minor edits by rmk to convert Eric's driver to a generic PWM-based backlight driver. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-30Merge branch 'linux-2.6'Paul Mackerras
2008-06-25[ARM] 5117/1: pxafb: fix __devinit/exit annotationsJaya Kumar
This patch fixes pxafb's init/exit annotations. It uses __devinit/exit for probe functions and __init for init functions. g_options is left as __devinitdata since it is used by both. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-22[ARM] 5116/1: pxafb: cleanup and fix order of failure handlingJaya Kumar
This issue was found by Krzysztof Helt and Eric Miao. pxafb had issues in the order with which it cleaned up if errors occurred during a probe. This patch reorders the failure handling sequence and also frees the cmap and clk. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-22[ARM] 5115/1: pxafb: fix ifdef for command line option handlingJaya Kumar
This bug was found and fixed by Lothar Wassmann. Previously, the use of ifndef CONFIG_MODULES made it such that pxafb command line option parsing was dependent on whether the kernel was built with module support. The ifndef should be MODULE so that parsing is dependent only on whether the driver is built-in or not. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-20fbmem: cdev lock_kernel() pushdownJonathan Corbet
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2008-06-16Merge branch 'linus' into x86/xenIngo Molnar
2008-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: get leo framebuffer working
2008-06-12Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5091/1: Add missing bitfield include to regs-lcd.h [ARM] 5090/1: Correct pxafb palette typo error [ARM] 5077/1: spi: fix list scan success verification in PXA ssp driver
2008-06-12drivers/video/cirrusfb: fix RAM address printkPhilippe De Muyter
In the cirrusfb driver, the RAM address printk has a superfluous 'x' that could be interpreted as "don't care", while it is actually a typo. Fix that. [akpm@linux-foundation.org: join the two printk strings to make it atomic] Signed-off-by: Philippe De Muyter <phdm@macqel.be> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-12hgafb: resource management fixKrzysztof Helt
Release ports which are requested during detection which are not freed if there is no hga card. Otherwise there is a crash during cat /proc/ioports command. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-12fsl-diu-db: compile fixJeff Mahoney
This patch fixes a compile failure in 2.6.26-rc5-git5. The variable is expected to be called ofdev. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-11[ARM] 5090/1: Correct pxafb palette typo errorJürgen Schindele
This patch correct a typo error in pxafb vhich is relevant for 8-bit palette framebuffer configuration. Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-10sparc: get leo framebuffer workingRobert Reif
This patch fixes several issues: Use the right openprom device name so the driver is actually loaded. Fix a crash due to unitialized info->pseudo_palette. Put the framebuffer in the proper mode for software rendering. checkpatch cleanups. Hardware acceleration was removed when the driver was rewritten for the new framebuffer API in 2003. Software rendering requires a different framebuffer access mode but that wasn't changed. The driver now works again but is slow. The proper fix is to reintroduce hardware acceleration. Signed-off-by: Robert Reif <reif@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-09platinumfb: Use linux/of_{device,platform}.h instead of asmStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-06fbdev: export symbol fb_mode_optionGeoff Levand
Frame buffer and mode setting drivers can be built as modules, so fb_mode_option needs to be exported to support these. Prevents this error: ERROR: "fb_mode_option" [drivers/ps3/ps3av_mod.ko] undefined! Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06fbcon: fix wrong vmode bits copied on console switchKrzysztof Helt
The interlaced and double line mode bits should not be copied to new console when the console is switched. Otherwise, the new console may be set to incorrect refresh rate. Also, the x and y offsets does not need to be copied. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06modedb: fix incorrect sync and vmode flags for CVT modesKrzysztof Helt
The temporary structure for calculated CVT mode is not initialized. Few fields have only bits or-ed or and-ed so they may be left in incorrect (random) state. Testing of the tridentfb seems like a good exercise for the fbdev layer. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-27xen pvfb: Dynamic mode support (screen resizing)Markus Armbruster
The pvfb backend indicates dynamic mode support by creating node feature_resize with a non-zero value in its xenstore directory. xen-fbfront sends a resize notification event on mode change. Fully backwards compatible both ways. Framebuffer size and initial resolution can be controlled through kernel parameter xen_fbfront.video. The backend enforces a separate size limit, which it advertises in node videoram in its xenstore directory. xen-kbdfront gets the maximum screen resolution from nodes width and height in the backend's xenstore directory instead of hardcoding it. Additional goodie: support for larger framebuffers (512M on a 64-bit system with 4K pages). Changing the number of bits per pixels dynamically is not supported, yet. Ported from http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/92f7b3144f41 http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/bfc040135633 Signed-off-by: Pat Campbell <plc@novell.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen pvfb: Zero unused bytes in events sent to backendMarkus Armbruster
This isn't a security flaw (the backend can see all our memory anyway). But it's the right thing to do all the same. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen pvfb: Module aliases to support module autoloadingMarkus Armbruster
These are mostly for completeness and consistency with the other frontends, as PVFB is typically compiled in rather than a module. Derived from http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/5e294e29a43e While there, add module descriptions. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: Enable console tty by default in domU if it's not a dummyMarkus Armbruster
Without console= arguments on the kernel command line, the first console to register becomes enabled and the preferred console (the one behind /dev/console). This is normally tty (assuming CONFIG_VT_CONSOLE is enabled, which it commonly is). This is okay as long tty is a useful console. But unless we have the PV framebuffer, and it is enabled for this domain, tty0 in domU is merely a dummy. In that case, we want the preferred console to be the Xen console hvc0, and we want it without having to fiddle with the kernel command line. Commit b8c2d3dfbc117dff26058fbac316b8acfc2cb5f7 did that for us. Since we now have the PV framebuffer, we want to enable and prefer tty again, but only when PVFB is enabled. But even then we still want to enable the Xen console as well. Problem: when tty registers, we can't yet know whether the PVFB is enabled. By the time we can know (xenstore is up), the console setup game is over. Solution: enable console tty by default, but keep hvc as the preferred console. Change the preferred console to tty when PVFB probes successfully, unless we've been given console kernel parameters. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-24Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] integrator: fix build warnings and errors [ARM] fix OMAP include loops Revert "[ARM] pxa: spitz wants PXA27x UDC definitions" [ARM] 5053/1: define before use of processor_id [ARM] 5052/1: export clock functions for the at91x40 [ARM] 5051/1: define pgtable_t for the !CONFIG_MMU case too [ARM] omap: fix omap clk support build errors [ARM] 5039/1: S3C244X: Rename SDI device if running on S3C244X. [ARM] 5043/1: pxafb: remove unused mode variable in pxafb_init_fbinfo [ARM] 5041/1: VR1000: Fix DM9000 IRQ flags initialisation [ARM] 5040/1: BAST: Fix DM9000 IRQ flags initialisation [ARM] 5038/1: ARM: OMAP: Remove tsc2102 references from board-palmte.c [ARM] 5025/2: fix collie cpu initialisation
2008-05-24S3C2410: fix driver MODULE_ALIAS()Ben Dooks
Add a correct MODULE_ALIAS() entry for this driver to enable udev module loading. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24S3C2410: clean out changelog header and tidyBen Dooks
Remove the old changelog entries which are now out of date and should be extractable from git anyway. Also tidy up the copyright for the driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24S3C2410: add error print if we cannot add attributeBen Dooks
Fix the following warning by checking the result of device_create_file and printing an error but not removing the device (loss of debug registers is not fatal). drivers/video/s3c2410fb.c:905: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 06:38:09 +0000