summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2009-01-12[WATCHDOG] Pika Warp appliance watchdog timerSean MacLennan
The FPGA based watchdog timer used by the Pika Warp appliance. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-01-12[WATCHDOG] Basic support for GE Fanuc's FPGA based watchdog timerMartyn Welch
GE Fanuc SBC610 Support for the FPGA based watchdog timer as found on GE Fanuc's SBC310, SBC610 and PPC9A Single Board Computers. This patch adds support for the watchdog timer found in one of the devices FPGAs. There are two identical watchdog timers at different offsets in the above mentioned boards, this driver is capable of supporting one of them. The watchdog timers are also capable of generating interrupts at a user-configurable threshold, though support for this operation is currently not supported by the driver. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-01-12[WATCHDOG] wm8350: Fix section annotationsMark Brown
The probe and remove functions were incorrectly annotated, with the misannotation of the remove function causing build failures when built in. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-12-31[WATCHDOG] Add support for the WM8350 watchdogMark Brown
This driver implements support for the watchdog functionality provided by the Wolfson Microelectronics WM8350, a multi-function audio and power management subsystem intended for use in embedded systems. It is based on a driver originally written by Graeme Gregory, though it has been extensively modified since then. Use of a GPIO to kick the watchdog is not yet supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-12-31[WATCHDOG] Add SMSC SCH311x Watchdog Timer.Wim Van Sebroeck
Add a watchdog driver for the hardware watchdog timer on the SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset. Tested-by: Marco Chiappero <marco@absence.it> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-12-31[WATCHDOG] ib700wdt - add timeout parameterWim Van Sebroeck
Add the timeout module parameter to ib700wdt.c Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-12-29Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2008-12-29[ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constantEric Miao
See description of commit: [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant for additional information. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-15Merge branch 'omap3-upstream' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2008-12-03iTCO_wdt: fix typo when setting TCO_EN bitLinus Torvalds
The code used '&= 0x00002000' when it tried to set the TCO_EN bit, which obviously didn't set that bit at all, but instead just reset all the other bits in the SMI_EN register. This bug seemingly caused various random behavior, with Frans Pop reporting that X.org just silently hung at startup and Rafael Wysocki reports the fan spinning with full speed. See http://lkml.org/lkml/2008/12/3/178 http://bugzilla.kernel.org/show_bug.cgi?id=12162 The problem seems to have been triggered by "[WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboards" (commit 7cd5b08be3c489df11b559fef210b81133764ad4), but the bogus code existed before that too (in the "supermicro_old_pre_stop()" function), it just apparently never showed up due to different logic. In that commit the broken code got moved around and now gets executed much more. Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Frans Pop <elendil@planet.nl> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-01[WATCHDOG] hpwdt: Fix kdump when using hpwdtBernhard Walle
When the "hpwdt" module is loaded (even if the /dev/watchdog device is not opened), then kdump does not work. The panic kernel either does not start at all or crash in various places. The problem is that hpwdt_pretimeout is registered with register_die_notifier() with the highest possible priority. Because it returns NOTIFY_STOP, the crash_nmi_callback which is also registered with register_die_notifier() is never executed. This causes the shutdown of other CPUs to fail. Reverting the order is no option: The crash_nmi_callback executes HLT and so never returns normally. Because of that, it must be executed as last notifier, which currently is done. So, that patch returns NOTIFY_OK to keep the crash_nmi_callback executed. Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Cc: Vivek Goyal <vgoyal@redhat.com>
2008-11-29Merge branch 's3c-moves2' of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King
2008-11-29[ARM] Remove linux/sched.h from asm/cacheflush.h and asm/uaccess.hRussell King
... and fix those drivers that were incorrectly relying upon that include. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-21[WATCHDOG] hpwdt: set the mapped BIOS address space as executableBernhard Walle
The address provided by the SMBIOS/DMI CRU information is mapped via ioremap() in the virtual address space. However, since the address is executed (i.e. call'd), we need to set that pages as executable. Without that, I get following oops on a HP ProLiant DL385 G2 machine with BIOS from 05/29/2008 when I trigger crashdump: BUG: unable to handle kernel paging request at ffffc20011090c00 IP: [<ffffc20011090c00>] 0xffffc20011090c00 PGD 12f813067 PUD 7fe6a067 PMD 7effe067 PTE 80000000fffd3173 Oops: 0011 [1] SMP last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map CPU 1 Modules linked in: autofs4 ipv6 af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 fuse loop dm_mod rtc_cmos ipmi_si sg rtc_core i2c _piix4 ipmi_msghandler bnx2 sr_mod container button i2c_core hpilo joydev pcspkr rtc_lib shpchp hpwdt cdrom pci_hotplug usbhid hid ff_memless ohci_hcd ehci_hcd uhci_hcd usbcore edd ext3 mbcache jbd fan ide_pci_generic serverworks ide_core p ata_serverworks pata_acpi cciss ata_generic libata scsi_mod dock thermal process or thermal_sys hwmon Supported: Yes Pid: 0, comm: swapper Not tainted 2.6.27.5-HEAD_20081111100657-default #1 RIP: 0010:[<ffffc20011090c00>] [<ffffc20011090c00>] 0xffffc20011090c00 RSP: 0018:ffff88012f6f9e68 EFLAGS: 00010046 RAX: 0000000000000d02 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88012f6f9e98 R08: 666666666666660a R09: ffffffffa1006fc0 R10: 0000000000000000 R11: ffff88012f6f3ea8 R12: ffffc20011090c00 R13: ffff88012f6f9ee8 R14: 000000000000000e R15: 0000000000000000 FS: 00007ff70b29a6f0(0000) GS:ffff88012f6512c0(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: ffffc20011090c00 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff88012f6f2000, task ffff88007fa8a1c0) Stack: ffffffffa0f8502b 0000000000000002 ffffffff80738d50 0000000000000000 0000000000000046 0000000000000046 00000000fffffffe ffffffffa0f852ec 0000000000000000 ffffffff804ad9a6 0000000000000000 0000000000000000 Call Trace: Inexact backtrace: <NMI> [<ffffffffa0f8502b>] ? asminline_call+0x2b/0x55 [hpwdt] [<ffffffffa0f852ec>] hpwdt_pretimeout+0x3c/0xa0 [hpwdt] [<ffffffff804ad9a6>] ? notifier_call_chain+0x29/0x4c [<ffffffff802587e4>] ? notify_die+0x2d/0x32 [<ffffffff804abbdc>] ? default_do_nmi+0x53/0x1d9 [<ffffffff804abd90>] ? do_nmi+0x2e/0x43 [<ffffffff804ab552>] ? nmi+0xa2/0xd0 [<ffffffff80221ef9>] ? native_safe_halt+0x2/0x3 <<EOE>> [<ffffffff8021345d>] ? default_idle+0x38/0x54 [<ffffffff8021359a>] ? c1e_idle+0x118/0x11c [<ffffffff8020b3b5>] ? cpu_idle+0xa9/0xf1 Code: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <55> 50 e8 00 00 00 00 58 48 2d 07 10 40 00 48 8b e8 58 e9 68 02 RIP [<ffffc20011090c00>] 0xffffc20011090c00 RSP <ffff88012f6f9e68> CR2: ffffc20011090c00 Kernel panic - not syncing: Fatal exception Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-11-21[WATCHDOG] iTCO_wdt: add PCI ID's for ICH9 & ICH10 chipsetsWim Van Sebroeck
Add support for the following I/O controller hubs: ICH7DH, ICH9M, ICH9M-E, ICH10, ICH10R, ICH10D and ICH10DO. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-11-21[WATCHDOG] iTCO_wdt : correct status clearingWim Van Sebroeck
The iTCO_wdt code was not clearing the correct bits. It now clears the timeout status bit and then the SECOND_TO_STS bit and then the BOOT_STS bit. Note: we should first clear the SECOND_TO_STS bit before clearing the BOOT_STS bit. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-11-21[WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboardsWim Van Sebroeck
Bugzilla #9868: On Intel motherboards with the ICH9 based I/O controllers (Like DP35DP and DG33FB) the iTCO timer counts but it doesn't reboot the system after the counter expires. This patch fixes this by moving the enabling & disabling of the TCO_EN bit in the SMI_EN register into the start and stop code. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-11-21[WATCHDOG] fix mtx1_wdt compilation failureFlorian Fainelli
Using spin_lock_irqsave with a local variable called flags without declaring is a bad idea, fix this by declaring it. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-11-11Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Update desktop/server defconfigs powerpc: Fix msr check in compat_sys_swapcontext powerpc: Repair device bindings documentation powerpc: Updated Freescale PPC related defconfigs powerpc: Update QE/CPM2 usb_ctlr structures for USB support powerpc/86xx: Correct SOC bus-frequency in GE Fanuc SBC610 DTS powerpc: Fix Book-E watchdog timer interval setting powerpc/fsl-booke: Fix synchronization bug w/local tlb invalidates
2008-11-08powerpc: Fix Book-E watchdog timer interval settingMatthias Fuchs
This patch fixes the setting of the Book-E watchdog timer interval setup on initialization and by ioctl(). On initialization the period bits have to be masked before setting a new period. In WDIOC_SETTIMEOUT ioctl we have to use the correct mask. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-11-06[WATCHDOG] SAM9 watchdog - supported on all SAM9 and CAP9 processorsAndrew Victor
The SAM9 watchdog driver is usable on the whole family of AT91SAM9 and CAP9 processors. Update the configuration to indicate this and allow the driver to be selected. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-11-06[WATCHDOG] SAM9 watchdog - update for moved headersAndrew Victor
The architecture header files were recently moved from include/asm-arm/mach-at91/ to arch/arm/mach-at91/include/mach/. The SAM9 watchdog driver still includes a header from the old location. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-11-03Merge branch 'master' of ↵Ben Dooks
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into s3c-moves2
2008-10-30[ARM] S3C: Move regs-watchdog.h to arch/arm/plat-s3c/include/platBen Dooks
Move regs-watchdog.h to arch/arm/plat-s3c/include/plat ready to clean out the old include directories Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-28[PATCH] Switch all my contributions stuff to a single common addressAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-24[WATCHDOG] pci: use pci_ioremap_bar() in drivers/watchdogArjan van de Ven
Use the newly introduced pci_ioremap_bar() function in drivers/watchdog. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-23watchdog: Fix warningAlan Cox
This seems to have popped up after the recent merges: drivers/watchdog/w83697ug_wdt.c: In function ‘w83697ug_select_wd_register’: drivers/watchdog/w83697ug_wdt.c:105: warning: ‘return’ with a value, in function returning void Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-15[WATCHDOG] ib700wdt.c - fix buffer_underflow bugWim Van Sebroeck
This fixes Bug 11399: if ibwdt_set_heartbeat(int t) is called with value 30 then the check "if ((t < 0) || (t > 30))" in ibwdt_set_heartbeat is not going to fail because t == 30, but in the loop, the check wd_times[i] > t is never going to be true because none of the wd_times are greater than the value of t (i.e. 30). So we are exiting the loop with i == -1 and therefore setting wd_margin to -1 which is wrong. Reported-by: Zvonimir Rakamaric <zrakamar@cs.ubc.ca> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] orion5x_wdt.c: add spinlocking [WATCHDOG] Orion: add hardware watchdog support [WATCHDOG] omap_wdt.c: cleanup a bit omap_wdt.c [WATCHDOG] omap_wdt.c: another ioremap() fix [WATCHDOG] omap_wdt.c: sync linux-omap changes [WATCHDOG] Add AT91SAM9X watchdog [WATCHDOG] Add driver for winbond w83697ug/uf watchdog feature [WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/K
2008-10-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: sound/core/memalloc.c
2008-10-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
2008-10-10[WATCHDOG] orion5x_wdt.c: add spinlockingWim Van Sebroeck
Add spin_locking to orion5x_wdt.c to prevent races. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10[WATCHDOG] Orion: add hardware watchdog supportSylver Bruneau
This patch allows the use of the hardware watchdog in the Marvell Orion series of ARM SoCs. Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10[WATCHDOG] omap_wdt.c: cleanup a bit omap_wdt.cFelipe Balbi
Trivial cleanup patch. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10[WATCHDOG] omap_wdt.c: another ioremap() fixFelipe Balbi
convert to use ioremap() and __raw_{read/write} friends. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10[WATCHDOG] omap_wdt.c: sync linux-omap changesFelipe Balbi
These are changes that have been sitting in linux-omap and were never sent upstream. Hopefully, it'll never happen again at least for this driver. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10[WATCHDOG] Add AT91SAM9X watchdogRenaud CERRATO
Add a driver for the watchdog timer embedded into AT91SAM9X chips. Signed-off-by: Renaud Cerrato <r.cerrato@til-technologies.fr> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10[WATCHDOG] Add driver for winbond w83697ug/uf watchdog featureFlemming Frandsen
Adapted the w83627hf_wdt.c driver to work with the w83697ug/uf chip, found on MSI Fuzzy CX700 boards. The method used is taken directly from the winbond datasheet and surprisingly it differs slightly from all the other winbond watchdogs. So far it has only been tested on the CX700 board that I have, but it seems to work nicely. Signed-off-by: Flemming Frandsen <ff@nrvissing.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10[WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/KOliver Schuster
Add it87xx watchdog driver IT8716 IT8718 IT8726 IT8712-J IT8712-K Signed-off-by: Oliver Schuster <olivers137@aol.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-09Merge branch 'ptebits' into develRussell King
Conflicts: arch/arm/Kconfig
2008-09-23[WATCHDOG] unlocked_ioctl changesWim Van Sebroeck
Fix some drivers so that they use the unlocked_ioctl call. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-09-23[WATCHDOG] wdt285: fix sparse warningsBen Dooks
The wdt285.c watchdog driver is producing a number of sparse errors due to missing __user attributes to calls to put_user and copy_to_user, as well as in the prototype of watchdog_write. wdt285.c:144:21: warning: incorrect type in argument 1 (different address spaces) wdt285.c:144:21: expected void [noderef] <asn:1>*to wdt285.c:144:21: got void *<noident> wdt285.c:150:9: warning: incorrect type in initializer (different address spaces) wdt285.c:150:9: expected int const [noderef] <asn:1>*register __p wdt285.c:150:9: got int *<noident> wdt285.c:159:9: warning: incorrect type in initializer (different address spaces) wdt285.c:159:9: expected int const [noderef] <asn:1>*register __p wdt285.c:159:9: got int *<noident> wdt285.c:174:9: warning: incorrect type in initializer (different address spaces) wdt285.c:174:9: expected int const [noderef] <asn:1>*register __p wdt285.c:174:9: got int *<noident> wdt285.c:183:12: warning: incorrect type in initializer (incompatible argument 2 (different address spaces)) wdt285.c:183:12: expected int ( *write )( ... ) wdt285.c:183:12: got int ( static [toplevel] *<noident> )( ... ) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-09-23[WATCHDOG] ibmasr: remove unnecessary spin_unlock()Akinobu Mita
__asr_toggle() is always called with asr_lock held. But there is unnecessary spin_unlock() call in __asr_toggle(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Andrey Panin <pazke@donpac.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-09-16Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 Conflicts: arch/sparc64/kernel/pci_psycho.c
2008-09-01[ARM] cputype: separate definitions, use themRussell King
Add asm/cputype.h, moving functions and definitions from asm/system.h there. Convert all users of 'processor_id' to the more efficient read_cpuid_id() function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-31sparc: Annotate of_device_id arrays with const or __initdata.David S. Miller
As suggested by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29cpwatchdog: Move to drivers/watchdog/cpwd.cDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29riowd: Distinguish between driver name and OF device node name.David S. Miller
Driver messages should print the driver name, rather than the OF device node name. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29riowatchdog: Move under drivers/watchdogDavid S. Miller
The config stuff was already in drivers/watchdog/Kconfig Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-26[WATCHDOG] removed unused #include <version.h>Huang Weiyi
The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/watchdog/pc87413_wdt.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>