summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2013-03-01watchdog: sp805_wdt depends on ARMAlessandro Rubini
The SP805 driver is only used by the Spear machines, and uses writel_relaxed, which is not available on all architectures. The dependency from CONFIG_ARM avoids compilation problems under randomconfig when CONFIG_ARM_AMBA is enabled for x86 builds. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: davinci_wdt: update to devm_* APIKumar, Anil
Update the code to use devm_* API so that driver core will manage resources. Signed-off-by: Kumar, Anil <anilkumar.v@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: davinci_wdt: use devm managed clk getMrugesh Katepallewar
Get the clock using devm_clk_get(). Signed-off-by: Mrugesh Katepallewar <mrugesh.mk@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: at91rm9200: add DT supportJoachim Eastwood
Add DT support for at91rm9200_wdt. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: add timeout-sec property bindingFabio Porcedda
this patchset add the timeout-sec property to the following drivers: orion_wdt, pnx4008_wdt, s3c2410_wdt and at91sam9_wdt. The at91sam9_wdt is tested on evk-pr3, the other drivers are compile tested only. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: at91sam9_wdt: Convert to use the watchdog frameworkWenyou Yang
According to Documentation/watchdog/convert_drivers_to_kernel_api.txt, remove the file_operations struct, miscdevice, and obsolete includes Since the at91sam watchdog inherent characteristics, add the watchdog operations: at91wdt_start, at91wdt_stop and at91wdt_ping. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2013-03-01watchdog: omap_wdt: Add option nowayoutPali Rohár
Like other watchdog drivers, this patch adds new option nowayout which overwrite WATCHDOG_NOWAYOUT. Signed-off-by: Pali Rohar <pali.rohar@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: core: dt: add support for the timeout-sec dt propertyFabio Porcedda
Add support for watchdog drivers to initialize/set the timeout field of the watchdog_device structure. The timeout field is initialised either with the module timeout parameter value (if valid) or with the timeout-sec dt property (if valid). If both are invalid the initial value is unchanged. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: bcm47xx_wdt.c: add hard timerHauke Mehrtens
The more recent devices have a watchdog timer which could be configured for over 2 hours and not just 2 seconds like the first generation devices. For those devices do not use the extra software timer, but directly program the time into the register. This will automatically be used if the timer supports more than a minute. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: bcm47xx_wdt.c: rename wdt_time to timeoutHauke Mehrtens
Rename wdt_time to timeout to name it like the other watchdog driver do it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: bcm47xx_wdt.c: rename ops methodsHauke Mehrtens
Rename the methods registered to struct watchdog_ops bcm47xx_wdt_ops in order to add an other struct watchdog_ops using different ops in the next patch. Also rename WDT_MAX_TIME to WDT_SOFTTIMER_MAX. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: bcm47xx_wdt.c: use platform deviceHauke Mehrtens
Instead of accessing the function to set the watchdog timer directly, register a platform driver the platform could register to use this watchdog driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: bcm47xx_wdt.c: convert to watchdog core apiHauke Mehrtens
Convert the bcm47xx_wdt.c driver to the new watchdog core api. The nowayout parameter is now added unconditionally to the module. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: Convert BookE watchdog driver to watchdog infrastructureGuenter Roeck
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: s3c2410_wdt: Use devm_* functionsJingoo Han
Use devm_* functions to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: remove old STMP3xxx driverWolfram Sang
Now that the new driver is in place, we can remove the old one. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: add new driver for STMP3xxx and i.MX23/28Wolfram Sang
Replace the existing STMP3xxx driver because it has enough drawbacks that a rewrite is apropriate. The new driver is designed to use the watchdog framework which makes it a lot smaller and avoids open coding the watchdog API again. It also uses now an explicitly exported function from the RTC driver to set up its registers (the old driver silently reused the hopefully(!) already remapped RTC registers). Also, this driver is mach independent, while the old one depends on a mach replaced by another one a year ago. Since the user interface is still the standard watchdog API, users don't need to adapt. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: introduce retu_wdt driverAaro Koskinen
Introduce Retu watchdog driver. Cc: linux-watchdog@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: intel_scu_watchdog: fix Kconfig dependencyWim Van Sebroeck
Kernel symbol X86_MRST has been removed from the kernel. INTEL_SCU_WATCHDOG driver can never be compiled due dependence of X86_MRST which remained in the drivers/watchdog/Kconfig. Reported-by: Alexander Shiyan <shc_work@mail.ru> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: orion_wdt: Add platform aliasLubomir Rintel
...so that it's automatically picked up on relevant platforms. Tested on Kirkwood-based GuruPlug. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: ath79_wdt: add device tree matchingGabor Juhos
Cc: Grant Likely <grant.likely@secretlab.ca> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: ath79_wdt: get register base from platform device's resourcesGabor Juhos
The ath79_wdt driver uses a fixed memory address currently. Although this is working with each currently supported SoCs, but this may change in the future. Additionally, the driver includes platform specific header files in order to be able to get the memory base of the watchdog device. The patch adds a memory resource to the platform device, and converts the driver to get the base address of the watchdog device from that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: ath79_wdt: convert to use devm_clk_getGabor Juhos
Use the managed version of clk_get. This allows to simplify the probe/remove functions a bit. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: sp5100_tco: Write back the original value to reserved bits, ↵Takahisa Tanaka
instead of zero In case of SP5100 or SB7x0 chipsets, the sp5100_tco module writes zero to reserved bits. The module, however, shouldn't depend on specific default value, and should perform a read-merge-write operation for the reserved bits. This patch makes the sp5100_tco module perform a read-merge-write operation on all the chipset (sp5100, sb7x0, sb8x0 or later). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43176 Signed-off-by: Takahisa Tanaka <mc74hc00@gmail.com> Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@vger.kernel.org>
2013-03-01watchdog: sp5100_tco: Fix wrong indirect I/O access for getting value of ↵Takahisa Tanaka
reserved bits In case of SB800 or later chipset and re-programming MMIO address(*), sp5100_tco module may read incorrect value of reserved bit, because the module reads a value from an incorrect I/O address. However, this bug doesn't cause a problem, because when re-programming MMIO address, by chance the module writes zero (this is BIOS's default value) to the low three bits of register. * In most cases, PC with SB8x0 or later chipset doesn't need to re-programming MMIO address, because such PC can enable AcpiMmio and can use 0xfed80b00 for watchdog register base address. This patch fixes this bug. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43176 Signed-off-by: Takahisa Tanaka <mc74hc00@gmail.com> Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@vger.kernel.org>
2013-03-01watchdog: gef_wdt.c: add missing remove callbackDevendra Naga
this module missed a remove callback in the platform ops. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: at91sam9: at91_wdt_dt_ids cannot be __initArnd Bergmann
The device IDs are referenced by the driver and potentially used beyond the init time, as kbuild correctly warns about. Remove the __initconst annotation. Without this patch, building at91_dt_defconfig results in: WARNING: drivers/watchdog/built-in.o(.data+0x28): Section mismatch in reference from the variable at91wdt_driver to the (unknown reference) .init.rodata:(unknown) The variable at91wdt_driver references the (unknown reference) __initconst (unknown) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
2013-03-01watchdog: da9055_wdt needs to select WATCHDOG_CORERandy Dunlap
DA9055_WATCHDOG (introduced in v3.8) needs to select WATCHDOG_CORE so that it will build cleanly. Fixes these build errors: da9055_wdt.c:(.text+0xe9bc7): undefined reference to `watchdog_unregister_device' da9055_wdt.c:(.text+0xe9f4b): undefined reference to `watchdog_register_device' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org Cc: stable <stable@vger.kernel.org>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-24Merge tag 'mfd-3.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS updates from Samuel Ortiz: "This is the MFD pull request for the 3.9 merge window. No new drivers this time, but a bunch of fairly big cleanups: - Roger Quadros worked on a OMAP USBHS and TLL platform data consolidation, OMAP5 support and clock management code cleanup. - The first step of a major sync for the ab8500 driver from Lee Jones. In particular, the debugfs and the sysct interfaces got extended and improved. - Peter Ujfalusi sent a nice patchset for cleaning and fixing the twl-core driver, with a much needed module id lookup code improvement. - The regular wm5102 and arizona cleanups and fixes from Mark Brown. - Laxman Dewangan extended the palmas APIs in order to implement the palmas GPIO and rt drivers. - Laxman also added DT support for the tps65090 driver. - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra and Darren Hart. - Linus Walleij patchset for the ab8500 driver allowed ab8500 and ab9540 based devices to switch to the new abx500 pin-ctrl driver. - The max8925 now has device tree and irqdomain support thanks to Qing Xu. - The recently added rtsx driver got a few cleanups and fixes for a better card detection code path and now also supports the RTS5227 chipset, thanks to Wei Wang and Roger Tseng." * tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits) mfd: lpc_ich: Use devres API to allocate private data mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH mfd: lpc_sch: Accomodate partial population of the MFD devices mfd: da9052-i2c: Staticize da9052_i2c_fix() mfd: syscon: Fix sparse warning mfd: twl-core: Fix kernel panic on boot mfd: rtsx: Fix issue that booting OS with SD card inserted mfd: ab8500: Fix compile error mfd: Add missing GENERIC_HARDIRQS dependecies Documentation: Add docs for max8925 dt mfd: max8925: Add dts mfd: max8925: Support dt for backlight mfd: max8925: Fix onkey driver irq base mfd: max8925: Fix mfd device register failure mfd: max8925: Add irqdomain for dt mfd: vexpress: Allow vexpress-sysreg to self-initialise mfd: rtsx: Support RTS5227 mfd: rtsx: Implement driving adjustment to device-dependent callbacks mfd: vexpress: Add pseudo-GPIO based LEDs mfd: ab8500: Rename ab8500 to abx500 for hwmon driver ...
2013-02-22new helper: file_inode(file)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-14watchdog: Add support for ux500_wdt watchdogFabio Baltieri
This patch adds support for the ux500_wdt watchdog that is found in ST-Ericsson Ux500 platform. The driver is based on PRCMU APIs. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-25watchdog: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17watchdog: convert drivers/watchdog/* to use module_platform_driver_probeFabio Porcedda
This makes the code a bit smaller by getting rid of some boilerplate code. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-02watchdog: twl4030_wdt: add DT supportAaro Koskinen
Add DT support for twl4030_wdt. This is needed to get twl4030_wdt to probe when booting with DT. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-01-02watchdog: omap_wdt: eliminate unused variable and a compiler warningAaro Koskinen
We forgot to delete this in the commit 4f4753d9 (watchdog: omap_wdt: convert to devm_ functions), and as a result the following compilation warning was introduced: drivers/watchdog/omap_wdt.c: In function 'omap_wdt_remove': drivers/watchdog/omap_wdt.c:299:19: warning: unused variable 'res' [-Wunused-variable] Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-01-02watchdog: da9055: Don't update wdt_dev->timeout in da9055_wdt_set_timeout ↵Axel Lin
error path Otherwise, WDIOC_GETTIMEOUT returns wrong value if set_timeout fails. This patch also removes unnecessary ret variable in da9055_wdt_ping function. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-01-02watchdog: da9055: Fix invalid free of devm_ allocated dataAxel Lin
It is not required to free devm_ allocated data. Since kref_put needs a valid release function, da9055_wdt_release_resources() is not deleted. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19watchdog: Orion: Fix possible null-deference in orion_wdt_probeJason Gunthorpe
If the DT does not include a regs parameter then the null res would be dereferenced. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19watchdog: sp5100_tco: Add SB8x0 chipset supportTakahisa Tanaka
The current sp5100_tco driver only supports SP5100/SB7x0 chipset, doesn't support SB8x0 chipset, because current sp5100_tco driver doesn't know that the offset address for watchdog timer was changed from SB8x0 chipset. The offset address of SP5100 and SB7x0 chipsets are as follows, quote from the AMD SB700/710/750 Register Reference Guide (Page 164) and the AMD SP5100 Register Reference Guide (Page 166). WatchDogTimerControl 69h WatchDogTimerBase0 6Ch WatchDogTimerBase1 6Dh WatchDogTimerBase2 6Eh WatchDogTimerBase3 6Fh In contrast, the offset address of SB8x0 chipset is as follows, quote from AMD SB800-Series Southbridges Register Reference Guide (Page 147). WatchDogTimerEn 48h WatchDogTimerConfig 4Ch So, In the case of SB8x0 chipset, sp5100_tco reads meaningless MMIO address (for example, 0xbafe00) from wrong offset address, and the following message is logged. SP5100 TCO timer: mmio address 0xbafe00 already in use With this patch, sp5100_tco driver supports SB8x0 chipset, and can avoid iomem resource conflict. The processing of this patch is as follows. Step 1) Attempt to get the watchdog base address from indirect I/O (0xCD6 and 0xCD7). - Go to the step 7 if obtained address hasn't conflicted with other resource. But, currently, the address (0xfec000f0) conflicts with the IOAPIC MMIO address, and the following message is logged. SP5100 TCO timer: mmio address 0xfec000f0 already in use 0xfec000f0 is recommended by AMD BIOS Developer's Guide. So, go to the next step. Step 2) Attempt to get the SBResource_MMIO base address from AcpiMmioEN (for SB8x0, PM_Reg:24h) or SBResource_MMIO (SP5100/SB7x0, PCI_Reg:9Ch) register. - Go to the step 7 if these register has enabled by BIOS, and obtained address hasn't conflicted with other resource. - If above condition isn't true, go to the next step. Step 3) Attempt to get the free MMIO address from allocate_resource(). - Go to the step 7 if these register has enabled by BIOS, and obtained address hasn't conflicted with other resource. - Driver initialization has failed if obtained address has conflicted with other resource, and no 'force_addr' parameter is specified. Step 4) Use the specified address If 'force_addr' parameter is specified. - allocate_resource() function may fail, when the PCI bridge device occupies iomem resource from 0xf0000000 to 0xffffffff. To handle such a case, I added 'force_addr' parameter to sp5100_tco driver. With 'force_addr' parameter, sp5100_tco driver directly can assign MMIO address for watchdog timer from free iomem region. Note that It's dangerous to specify wrong address in the 'force_addr' parameter. Example of force_addr parameter use # cat /proc/iomem ...snip... fec00000-fec003ff : IOAPIC 0 <--- free MMIO region fec10000-fec1001f : pnp 00:0b fec20000-fec203ff : IOAPIC 1 ...snip... # cat /etc/modprobe.d/sp5100_tco.conf options sp5100_tco force_addr=0xfec00800 # modprobe sp5100_tco # cat /proc/iomem ...snip... fec00000-fec003ff : IOAPIC 0 fec00800-fec00807 : SP5100 TCO <--- watchdog timer MMIO address fec10000-fec1001f : pnp 00:0b fec20000-fec203ff : IOAPIC 1 ...snip... # - Driver initialization has failed if specified address has conflicted with other resource. Step 5) Disable the watchdog timer - To rewrite the watchdog timer register of the chipset, absolutely guarantee that the watchdog timer is disabled. Step 6) Re-program the watchdog timer MMIO address to chipset. - Re-program the obtained MMIO address in Step 3 or Step 4 to chipset via indirect I/O (0xCD6 and 0xCD7). Step 7) Enable and setup the watchdog timer This patch has worked fine on my test environment (ASUS M4A89GTD-PRO/USB3 and DL165G7). therefore I believe that it's no problem to re-program the MMIO address for watchdog timer to chipset during disabled watchdog. However, I'm not sure about it, because I don't know much about chipset programming. So, any comments will be welcome. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43176 Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl> Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Takahisa Tanaka <mc74hc00@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19watchdog: davinci_wdt: add OF supportMurali Karicheri
This adds OF support for davinci_wdt driver. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19watchdog: da9052: Fix invalid free of devm_ allocated dataTushar Behera
It is not required to free devm_ allocated data. Since kref_put needs a valid release function, da9052_wdt_release_resources() is not deleted. Fixes following warning. drivers/watchdog/da9052_wdt.c:59:1-6: WARNING: invalid free of devm_ allocated data Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19watchdog: twl4030_wdt: Change TWL4030_MODULE_PM_RECEIVER to ↵Peter Ujfalusi
TWL_MODULE_PM_RECEIVER To facilitate upcoming cleanup in twl stack. No functional changes. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19watchdog: remove depends on CONFIG_EXPERIMENTALKees Cook
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19watchdog: Convert dev_printk(KERN_<LEVEL> to dev_<level>(Joe Perches
dev_<level> calls take less code than dev_printk(KERN_<LEVEL> and reducing object size is good. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19watchdog: DA9055 Watchdog driverAshish Jangam
This is the Watchdog patch for the DA9055 PMIC. This patch has got dependency on the DA9055 MFD core. This patch is functionally tested on SMDK6410 Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19watchdog: omap_wdt: eliminate gotoAaro Koskinen
Eliminate a goto to simplify the code. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19watchdog: omap_wdt: delete redundant platform_set_drvdata() callsAaro Koskinen
It's not needed to manually reset the driver data. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19watchdog: omap_wdt: convert to devm_ functionsAaro Koskinen
Use devm_kzalloc(), devm_request_mem_region() ande devm_ioremap() to simplify the code. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19watchdog: omap_wdt: convert to new watchdog coreAaro Koskinen
Convert omap_wdt to new watchdog core. On OMAP boards, there are usually multiple watchdogs. Since the new watchdog core supports multiple watchdogs, all watchdog drivers used on OMAP should be converted. The legacy watchdog device node is still created, so this should not break existing users. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Jarkko Nikula <jarkko.nikula@jollamobile.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 10:34:25 +0000