summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-04-27USB: fix error handling for mct_u232Oliver Neukum
we report errors to the caller. THis patch adds error handling to the driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix error handling in kl5kusbOliver Neukum
- report errors - cleanup in error case - use of endianness macros Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix catc error handlingOliver Neukum
this driver ignores errors while starting the transmit queue. It will never be reported stopped as the completion handler won't run and it will never be started again as it will be considered started. This patch adds error handling. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: cypress_cy7c63: race disconnect/sysfs read-write leading to following ↵Oliver Neukum
NULL pointer this driver sets intfdata to NULL while it still can be read and happily followed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix ark3116 memory leakOliver Neukum
this driver has a memory leak in an error case. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: ftdi_sio: Add USB ID of ADSTech USBX-707Jelle Foks
This patch adds the USB ID of the ADS Tech USBX-707 USB IR blaster (that comes with the ADS Tech PTV-305 grabber card), which has a ftdi232bm inside hooked up to a pic. With this it should be fairly straightforward to make at least lirc receiving work with this device. I will submit a patch to lirc for that as soon as I have one ready, I'm getting data with minicom with this patch, but need to figure out some more details such as best/correct baudrate. Signed-off-by: Jelle Foks <jelle@foks.8m.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix race in ftdio_writeOliver Neukum
this has the same race as the visor driver. The counter must be incremented under the lock it is checked under. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix race in visor_writeOliver Neukum
this fixes a small race in visor_write. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: aircable cleanupOliver Neukum
- proper endianness macros - scheduling in interrupt in error case Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Naranjo Manuel Francisco <naranjo.manuel@gmail.com>
2007-04-27USB: make usbdevices export their device nodes instead of using a separate classKay Sievers
o The "real" usb-devices export now a device node which can populate /dev/bus/usb. o The usb_device class is optional now and can be disabled in the kernel config. Major/minor of the "real" devices and class devices are the same. o The environment of the usb-device event contains DEVNUM and BUSNUM to help udev and get rid of the ugly udev rule we need for the class devices. o The usb-devices and usb-interfaces share the same bus, so I used the new "struct device_type" to let these devices identify themselves. This also removes the current logic of using a magic platform-pointer. The name of the device_type is also added to the environment which makes it easier to distinguish the different kinds of devices on the same subsystem. It looks like this: add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1 SUBSYSTEM=usb SEQNUM=1533 MAJOR=189 MINOR=131 DEVTYPE=usb_device PRODUCT=46d/c03e/2000 TYPE=0/0/0 BUSNUM=002 DEVNUM=004 This udev rule works as a replacement for usb_device class devices: SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \ NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0644" Updated patch, which needs the device_type patches in Greg's tree. I also got a bugzilla assigned for this. :) https://bugzilla.novell.com/show_bug.cgi?id=250659 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: gadget-storage needs BLOCKRandy Dunlap
With CONFIG_BLOCK=n, this build error happens: WARNING: "bdev_read_only" [drivers/usb/gadget/g_file_storage.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add power/level sysfs attributeAlan Stern
This patch (as874) adds another piece to the user-visible part of the USB autosuspend interface. The new power/level sysfs attribute allows users to force the device on (with autosuspend off), force the device to sleep (with autoresume off), or return to normal automatic operation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: ati_remote2: Add channel supportPeter Stokes
Add logical channel support for ATI Remote Wonder II The ATI Remote Wonder II can be configured with one of 16 unique logical channels. Allowing up to 16 remotes to be used independently within range of each other. This change adds functionality to configure the receiver and filter the input data to respond or exclude remotes configured with different logical channels. Signed-off-by: Peter Stokes <linux@dadeos.freeserve.co.uk> Acked-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: sierra close raceOliver Neukum
the sierra driver does not directly use usb_kill_urb(). It uses a wrapper. This wrapper means that callbacks which are running are not killed during close, resubmitting and illicitly pushing data into the tty layer. The whole purpose of usb_kill_urb() is subverted. The wrapper must be removed. The same problem as the option driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: option close raceOliver Neukum
the option driver does not directly use usb_kill_urb(). It uses a wrapper. This wrapper means that callbacks which are running are not killed during close, resubmitting and illicitly pushing data into the tty layer. The whole purpose of usb_kill_urb() is subverted. The wrapper must be removed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: omninet memory leak in error caseOliver Neukum
memory allocated must be freed in the error case. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27UHCI: Add some WARN_ON()sAlan Stern
This patch (as872) adds some WARN_ON()s to various error checks which are never supposed to fail. Unsettlingly, one of them has shown up in a user's log! Maybe making the warning more visible and having the call-stack information available will help pinpoint the source of the problem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix endianness in mos7720Oliver Neukum
there's code unclean w.r.t. endianness in the mos7720 driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: gtco.c: fix a use-before-checkAdrian Bunk
NULL checks should be before the first dereference. Spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: iowarrior.c: fix NULL dereferenceOliver Neukum
Am Montag, 19. 2007 10:25 schrieb Adrian Bunk: > The Coverity checker spotted the following NULL dereference: And this fixes an oops upon allocation failures. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: dm9601: fix sparse NULL warningsRandy Dunlap
Fix sparse NULL warnings: drivers/usb/net/dm9601.c:88:23: warning: Using plain integer as NULL pointer drivers/usb/net/dm9601.c:174:22: warning: Using plain integer as NULL pointer Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: io_edgeport: Convert to generic booleanRichard Knutsson
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: overhaul of mos7840 driverOliver Neukum
This fixes: - breaking DMA rules about buffers - usage of _global_ variables to save a single device's attributes - racy access to urb->status - smp monotonity issue with statistics - use of one buffer for many simultaneous URBs - error handling introduced - several instances of following NULL pointers - use after free - unnecessary GFP_ATOMIC - GFP_KERNEL in interrupt - various cleanups - write room granularity issue that bit cdc-acm - race in shutdown Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: io_edgeport race condition in countersOliver Neukum
io_edgeport is using a global variable without locking. This is _the_ classical race condition. This patch switches to atomic_t. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27EHCI: add delay to bus_resume before accessing portsAlan Stern
This patch (as870) adds a delay to ehci-hcd's bus_resume routine. Apparently there are controllers and/or BIOSes out there which need such a delay to get the ports back into their correct state. This fixes Bugzilla #8190. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: Allow autosuspend delay to equal 0Alan Stern
This patch (as867) adds an entry for the new power/autosuspend attribute in Documentation/ABI/testing, and it changes the behavior of the delay value. Now a delay of 0 means to autosuspend as soon as possible, and negative values will prevent autosuspend. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: separate autosuspend from external suspendAlan Stern
This patch (as866) adds new entry points for external USB device suspend and resume requests, as opposed to internally-generated autosuspend or autoresume. It also changes the existing remote-wakeup code paths to use the new routines, since remote wakeup is not the same as autoresume. As part of the change, it turns out to be necessary to do remote wakeup of root hubs from a workqueue. We had been using khubd, but it does autoresume rather than an external resume. Using the ksuspend_usb_wq workqueue for this purpose seemed a logical choice. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: help text for mos 7720 driverOliver Neukum
this driver's help text incorrectly claims to support only single port devices. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27mos7720 updateOliver Neukum
this driver has an interesting way of handling ENOMEM: complain and ignore. If you decide to live with allocation failures, you must 1. guard against URBs without corresponding buffers 2. complete allocation failures 3. always test entries for NULL before you follow the pointers This patch does so. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27ehci-fsl: change SI_CTRL, PRI_CTRL register offsets according to errataChristian Engelmayer
Correct the offsets of the SI_CTRL, PRI_CTRL registers according to the Reference Manual errata sheet in order to prevent unwanted settings regarding burst transactions and priority states. Signed-off-by: Christian Engelmayer <Christian.Engelmayer@frequentis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix race in HCD removalAlan Stern
This patch (as865) fixes a race in the HCD removal code discovered by Milan Plzik. Arrival of an interrupt after the root hub was unregistered could cause the root-hub status timer to start up, even after it was supposed to have been shut down. The problem is fixed by moving the del_timer_sync() call to after the HCD's stop() method, at which time IRQ generation should be disabled. Cc: Milan Plzik <milan.plzik@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: cxacru: export detailed device info through sysfsSimon Arlott
When the device is polled for status there is a lot of useful status information available that is ignored. This patch stores the device info array when the status is polled and adds sysfs files to the usb device to allow userspace to query it. Since the device updates its status internally once a second the poll time is changed to this, and round_jiffies_relative is used to avoid waking the cpu unnecessarily. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usbatm: create sysfs link "device" from atm class device to usb interfaceSimon Arlott
There is currently no path from the ATM device in /sys to the USB device's interface that the driver is using; this patch creates a "device" symlink. It is then possible to get to the cxacru ADSL statistics (http://lkml.org/lkml/2007/2/23/328): /sys/class/atm/cxacru0/device $ ls *_rate *_margin *_attenuation downstream_attenuation downstream_snr_margin upstream_rate downstream_rate upstream_attenuation upstream_snr_margin If this link is not appropriate I'd have to create device files in /sys/class/atm/cxacru0 instead - which seems less appropriate since the ADSL statistics are for the USB device not ATM (which is running over the ADSL). [akpm@linux-foundation.org: cleanups] Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: unnecessary GFP_ATOMIC in mos7720 driverOliver Neukum
GFP_KERNEL will do. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usbcore: move usb_autosuspend_workAlan Stern
This patch (as864) moves the work routine for USB autosuspend from one source file to another. This permits the removal of one whole global symbol (!) and should smooth the way for more changes in the future. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27libusual: change block scope variable to function scopePete Zaitcev
Someone changed the code to kthread and used his style instead of mine. The problem with the block variables is that they provoke shadowing, which is actually exactly what has happened in my other tree which has the class patch. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27ub: Bind to first endpoint, not to lastPete Zaitcev
The usb-storage switched to binding to first endpoint recently. Apparently, there are devices out there with extra endpoints. It is perfectly legal. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: cdc-acm: export parsed capabilities through sysfsOliver Neukum
this patch exports the attributes cdc-acm knows about a device through sysfs. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usbmon: Extended text APIPete Zaitcev
This patch adds a new text API, codenamed '1u', which captures more URB fields than old '1t' interface did. Also the '1u' text API is compatible with the future "bus zero" extension. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: kill BKL in usblcdOliver Neukum
this patch removes usage of BKL from usblcd, which got it from the old skeleton driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: kill BKL in skeleton driverOliver Neukum
Iet's kill BKL where we can. This is relative to the last patch to the skeleton driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix skeleton driverOliver Neukum
compilation of the skeleton driver is currently broken. It doesn't compile. So while I am it: - fix typo - add comments to answer common questions - actually allow autosuspend in the driver struct - increase paralellism by restricting code under locks Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: pxa2xx_udc: fix hardcoded irq numberMilan Svoboda
This patch changes last use of hardcoded number of irq to use platfrom_get_irq. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27pxa2xx_udc: cleanups, use platform_get_irqDavid Brownell
Make the pxa2xx_udc driver fetch its IRQ from platform resources rather than using compile-time constants, so that it works properly on IXP4xx systems not just PXA21x/25x/26x. Other updates: - Do that using platform_get_irq() - Switch to platform_driver_probe() - Handle device_add() errors - Remove "function" sysfs attribute and its potential errors - Whitespace cleanups Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Adding PID of SHARP S01SH for ipaq.cNorihiko Tomiyama
I write a patch adding support "SHARP EMONE(S01SH)" device for ipaq.c. EMONE is a PDA with built-in HSDPA function. From: Norihiko Tomiyama <norihiko.tomiyama@ctc-g.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (46 commits) dev_dbg: check dev_dbg() arguments drivers/base/attribute_container.c: use mutex instead of binary semaphore mod_sysfs_setup() doesn't return errno when kobject_add_dir() failure occurs s2ram: add arch irq disable/enable hooks define platform wakeup hook, use in pci_enable_wake() security: prevent permission checking of file removal via sysfs_remove_group() device_schedule_callback() needs a module reference s390: cio: Delay uevents for subchannels sysfs: bin.c printk fix Driver core: use mutex instead of semaphore in DMA pool handler driver core: bus_add_driver should return an error if no bus debugfs: Add debugfs_create_u64() the overdue removal of the mount/umount uevents kobject: Comment and warning fixes to kobject.c Driver core: warn when userspace writes to the uevent file in a non-supported way Driver core: make uevent-environment available in uevent-file kobject core: remove rwsem from struct subsystem qeth: Remove usage of subsys.rwsem PHY: remove rwsem use from phy core IEEE1394: remove rwsem use from ieee1394 core ...
2007-04-27dev_dbg: check dev_dbg() argumentsDan Williams
Duplicate what Zach Brown did for pr_debug in commit 8b2a1fd1b394c60eaa2587716102dd5e9b4e5990 [akpm@linux-foundation.org: fix a couple of things which broke] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27drivers/base/attribute_container.c: use mutex instead of binary semaphoreMatthias Kaehlcke
use mutex instead of binary semaphore in drivers/base/attribute_container.c Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27define platform wakeup hook, use in pci_enable_wake()David Brownell
This defines a platform hook to enable/disable a device as a wakeup event source. It's initially for use with ACPI, but more generally it could be used whenever enable_irq_wake()/disable_irq_wake() don't suffice. The hook is called -- if available -- inside pci_enable_wake(); and the semantics of that call are enhanced so that support for PCI PME# is no longer needed. It can now work for devices with "legacy PCI PM", when platform support allows it. (That support would use some board-specific signal for for the same purpose as PME#.) [akpm@linux-foundation.org: Make it compile with CONFIG_PM=n] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27device_schedule_callback() needs a module referenceAlan Stern
This patch (as896b) fixes an oversight in the design of device_schedule_callback(). It is necessary to acquire a reference to the module owning the callback routine, to prevent the module from being unloaded before the callback can run. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Satyam Sharma <satyam.sharma@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-25 01:38:20 +0000