summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-06-11iwlwifi: mvm: remove unused wait_for_ba fieldEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-10iwlwifi: mvm: remove iwl_mvm_dbgfs_set_fw_dbg_log declarationJohannes Berg
This function doesn't actually exist, remove its declaration. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-05iwlwifi: mvm: don't request SMPS on non-STA ifaceEytan Lifshitz
The Thermal Throttling code could do that, fix it. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-05iwlwifi: mvm: fix MCAST in AP modeEmmanuel Grumbach
In multicast, there is no retries nor RTS since there is no specific recipient that can ACK or send CTS. This means that we must not use the rate scale table for multicast frames. This true for any frame that doesn't have a valid ieee80211_sta pointer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-05iwlwifi: mvm: enable PM always in unassociated modeAlexander Bondar
In unassociated BSS STA mode FW verifies both power save and power management flags to decide on switching power off. The driver currently sets power management flag according to mac80211 decision. As result, in unassociated mode power management flag is down and power consumption is high. Change power management enablement. When unassociated in BPS and LP power save modes enable power management regardless of mac80211 decision. Rely on mac80211 decision if associated. Add power management state update during associated/disassociated modes transitions. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04iwlwifi: mvm: Change location of vif_count verification for PMAlexander Bondar
Currently vif_count verification for power management enablement appear in different places. Move these verifications to one place in iwl_mvm_update_power_mode(). Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04iwlwifi: mvm: correctly configure MCAST in AP modeEmmanuel Grumbach
The AP mode needs to use the MCAST fifo for the MCAST frames sent after the DTIM. This fifo needs to be configured with the same parameters as the VOICE FIFO. A separate SCD queue is mapped to this fifo - the cab_queue (cab stands for Content After Beacon). This queue isn't connected to any station, but rather to the MAC context. This queue should (and is already) be set as the MCAST queue - this is part of the of MAC context command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04iwlwifi: mvm: reorder Rx handler for performance purposesEmmanuel Grumbach
Since SCAN related handlers are much less likely than beacon related handlers, reorder between them. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04iwlwifi: mvm: Fix quota command settingsIlan Peer
According to the FW implementation, the quota command should have a valid entry for each active binding (where 'active' in this context means that the binding is known to the FW). In case the binding should not get any quota, the 'quota' should be set to zero. Not setting an 0 quota for an active binding when all the MACs in the binding are idle, i.e., not associated in case of managed interface, will result in preventing the FW scheduler from entering IDLE state and the FW from transitioning to low PS. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04iwlwifi: don't return -ERFKILL if SEND_IF_RFKILL is setEran Harary
When CMD_SEND_IN_RFKILL is set, it is perfectly legitimate to send a host command while RFKILL is asserted. In this case, the host command sending functions should return 0 even if RFKILL is asserted. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04iwlwifi: mvm: don't enable MIMO when BT is activeEmmanuel Grumbach
Another step in the rate control / BT Coex integration Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04iwlwifi: mvm: don't start BA agreement when BT is activeEmmanuel Grumbach
Otherwise WiFi would kill BT. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04iwlwifi: mvm: limit the length of the AMPDU when BT is runningEmmanuel Grumbach
This holds for existing BA agreements. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04iwlwifi: mvm: fix the LUT for BT CoexEmmanuel Grumbach
There was a typo in the Loose LUT for BT Coex. Fix that. Reported-by: Roi Cohen <roi.cohen@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-29iwlwifi: mvm: implement D3 testingJohannes Berg
For testing the D3 (WoWLAN) firmware, it is useful to be able to run the firmware with instrumentation while the host isn't sleeping and can poke at the firmware debug logging etc. Implement this by a debugfs file. When the file is opened the D3 firmware is loaded and all regular commands are blocked. While the file is being read, poll the firmware's PME status flag and report EOF once it changes to non-zero. When it is closed, do (most of) the resume processing. This lets a user just "cat" the file. Pressing Ctrl-C to kill the cat process will resume the firwmare as though the platform resumed for non-wireless reason and when the firmware wants to wake up reading from the file automatically completes. Unlike in real suspend, only disable interrupts and don't reset the TX/RX hardware while in the test mode. This is a workaround for some interrupt problems that happen only when the PCIe link isn't fully reset (presumably by changing the PCI config space registers which the core PCI code does.) Note that while regular operations are blocked from sending commands to the firmware, they could still be made and cause strange mac80211 issues. Therefore, while using this testing feature you need to be careful to not try to disconnect, roam or similar, and will see warnings for such attempts. Als note that this requires an upcoming firmware change to tell the driver the location of the PME status flag in SRAM. D3 test will fail if the firmware doesn't report the pointer. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-29cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsetsSolomon Peachy
Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-29mwifiex: dump small buffers with help of %*phAndy Shevchenko
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-29net: wireless: p54spi: Fix commenting styleSachin Kamat
Make the commenting style consistent with networking block comment style as suggested by checkpatch. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-29net: wireless: p54spi: Use module_spi_driver macroSachin Kamat
module_spi_driver() eliminates some boiler plate and makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-29ath9k_hw: fix PA predistortion miscalibrationFelix Fietkau
If any bins from the training data are skipped (i != max_index), the calculated compensation curve gets distorted, and the signal will be wildly overamplified. This may be the cause of the reported hardware damage that was caused by PA predistortion (because of which PAPRD was disabled by default). When calculating the x_est, Y, theta values, the use of max_index and i was reversed. i points to the bin index whereas max_index refers to the index of the calculated arrays. Note that PA predistortion is still disabled, it will be re-enabled after it has been properly validated. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-29wil6210: Don't use wdev->sme_stateVladimir Kondratiev
sme_state is private wdev's variable. Track connection state internally Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-29wil6210: channel off by 1Vladimir Kondratiev
WMI commands wants channel index, that is channel - 1 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-29Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-05-29Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-05-29iwlwifi: mvm: add debugfs for powersaveAlexander Bondar
Add debugfs files to control powersave parameters for testing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-29iwlwifi: mvm: Add support for connection monitor offloadHila Gonen
The firmware supports periodic keep alive and beacon monitoring, so advertise connection monitor offload capability by setting IEEE80211_HW_CONNECTION_MONITOR flag. Implement missed beacons notification handler. Call ieee80211_beacon_loss in case of missed beacons, so AP probing by mac80211 can be triggered. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-29iwlwifi: take valid ant for HT caps from TLVEmmanuel Grumbach
I forgot to take them from TLV and took them from the NVM instead. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-29iwlwifi: mvm: Change number of DTIMs to skip semanticsAlexander Bondar
If skip over DTIMs is enabled the driver can specify number of DTIMs to skip. This parameter in host-device API implies number of DTIM periods to skip. For example, to skip one DTIM means sleep over two DTIM periods. Change semantics accordingly. Change this parameter's default value. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-29iwlwifi: mvm: add thermal throttling and CT killEytan Lifshitz
In order to avoid NIC destruction due to high temperature, CT kill will power down the NIC. To avoid this, thermal throttling will decrease throughput to prevent the NIC from reaching the temperature at which CT kill is performed. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27iwlwifi: mvm: use proper scan type for P2PEmmanuel Grumbach
It was set to be FORCED because of a firmware bug which has been fixed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27Merge remote-tracking branch 'iwlwifi-fixes/master' into HEADJohannes Berg
Conflicts: drivers/net/wireless/iwlwifi/mvm/ops.c
2013-05-27iwlwifi: mvm: Add beacon abort enablementAlexander Bondar
Beacon abort is used by device to increase idle dwell time when system is idle. This algorithm is on top of beacon filtering feature. Enable beacon abort only if power management is enabled. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27iwlwifi: dvm: constify configuration structsJohannes Berg
The pointer that gets used is already const, so the structs can obviously be const as well. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27iwlwifi: move some configuration parameters into DVMJohannes Berg
There are a number of parameters that aren't really hardware specific but rather define how the DVM firmware is used. Move these into the DVM configuration. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27iwlwifi: dvm: rename iwl_lib_ops to iwl_dvm_cfgJohannes Berg
The next patches will move some more configuration data that isn't needed by mvm into this struct, so rename it now since it won't just be ops. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27iwlwifi: move D3_CFG_COMPLETE handling into DVMJohannes Berg
The MVM firmware doesn't communicate this way, it instead assumes D3 configuration is complete after a specific host command (which must be last) has been sent. Handling this bit thus belongs into the firmware API code, i.e. DVM. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-05-27iwlwifi: dvm: fix zero LQ CMD sending avoidanceEmmanuel Grumbach
In 63b77bf489881747c5118476918cc8c29378ee63 iwlwifi: dvm: don't send zeroed LQ cmd I tried to avoid to send zeroed LQ cmd, but I made a (very) stupid mistake in the memcmp. Since this patch has been ported to stable, the fix should go to stable too. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=58341 Cc: stable@vger.kernel.org Reported-by: Hinnerk van Bruinehsen <h.v.bruinehsen@fu-berlin.de> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-25Merge remote-tracking branch 'mac80211/master' into mac80211-nextJohannes Berg
2013-05-24mwl8k: Fix the firmware hang issue for 8764Nishant Sarmukadam
The firmware hang issue is not seen very often, though it is still seen sometimes (once in 12 hours in local tests). The changes in the driver ,to interrupt the firmware, are needed when we detect that firmware is stuck and when the host queues are full and we begin to drop packets. This is to ensure that the firmware does not miss any PPA_RDY interrupts to cause the firmware restart dont miss PPA_READY interrupt for SC2 Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24wil6210: use kfree_skb() instead of kfree()Wei Yongjun
Use kfree_skb() instead of kfree() to free sk_buff. Introduced by commit e270045b569cc7030abd29857f3a4e7906524ec0 (wil6210: Sanity check for reported DMA length) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: move 53xx specific bbp initializationStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: move 3290 specific bbp initializationStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: move 3352 specific bbp initializationStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R108 on proper subroutinesStanislaw Gruszka
Create helper function and move initialization to subroutines. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R104 on 3352 subroutineStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R134 & BBP_R135 on 53xx subroutineStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R128 on proper subroutinesStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R120 on 3352 subroutineStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R106 on all subroutines (except 5592)Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R105 on all subroutines (except 5592)Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 09:47:34 +0000