summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-08-06dmaengine: ioatdma: Add Skylake PCI Dev IDDave Jiang
[ Upstream commit 1594c18fd297a8edcc72bc4b161f3f52603ebb92 ] Adding Skylake Xeon PCI device ids for ioatdma and related bits. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06irqchip/mxs: Enable SKIP_SET_WAKE and MASK_ON_SUSPENDStefan Wahren
[ Upstream commit 88e20c74ee020f9e0c99dfce0dd9aa61c3f0cca0 ] The ICOLL controller doesn't provide any facility to configure the wakeup sources. That's the reason why this implementation lacks the irq_set_wake implementation. But this prevent us from properly entering power management states like "suspend to idle". So enable the flags IRQCHIP_SKIP_SET_WAKE and IRQCHIP_MASK_ON_SUSPEND to let the irqchip core allows and handles the power management. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Link: https://lkml.kernel.org/r/1482863397-11400-1-git-send-email-stefan.wahren@i2se.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06spi: dw: Make debugfs name unique between instancesPhil Reid
[ Upstream commit 13288bdf4adbaa6bd1267f10044c1bc25d90ce7f ] Some system have multiple dw devices. Currently the driver uses a fixed name for the debugfs dir. Append dev name to the debugfs dir name to make it unique. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06irqchip/keystone: Fix "scheduling while atomic" on rtStrashko, Grygorii
[ Upstream commit 2f884e6e688a0deb69e6c9552e51aef8b7e3f5f1 ] The below call chain generates "scheduling while atomic" backtrace and causes system crash when Keystone 2 IRQ chip driver is used with RT-kernel: gic_handle_irq() |-__handle_domain_irq() |-generic_handle_irq() |-keystone_irq_handler() |-regmap_read() |-regmap_lock_spinlock() |-rt_spin_lock() The reason is that Keystone driver dispatches IRQ using chained IRQ handler and accesses I/O memory through syscon->regmap(mmio) which is implemented as fast_io regmap and uses regular spinlocks for synchronization, but spinlocks transformed to rt_mutexes on RT. Hence, convert Keystone 2 IRQ driver to use generic irq handler instead of chained IRQ handler. This way it will be compatible with RT kernel where it will be forced thread IRQ handler while in non-RT kernel it still will be executed in HW IRQ context. Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Suman Anna <s-anna@ti.com> Link: https://lkml.kernel.org/r/20161208233310.10329-1-grygorii.strashko@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06vfio-pci: use 32-bit comparisons for register address for gcc-4.5Arnd Bergmann
[ Upstream commit 45e869714489431625c569d21fc952428d761476 ] Using ancient compilers (gcc-4.5 or older) on ARM, we get a link failure with the vfio-pci driver: ERROR: "__aeabi_lcmp" [drivers/vfio/pci/vfio-pci.ko] undefined! The reason is that the compiler tries to do a comparison of a 64-bit range. This changes it to convert to a 32-bit number explicitly first, as newer compilers do for themselves. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are setJordan Crouse
[ Upstream commit a6cb3b864b21b7345f824a4faa12b723c8aaf099 ] For every submission buffer object one of MSM_SUBMIT_BO_WRITE and MSM_SUBMIT_BO_READ must be set (and nothing else). If we allowed zero then the buffer object would never get queued to be unreferenced. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06drm/msm: Ensure that the hardware write pointer is validJordan Crouse
[ Upstream commit 88b333b0ed790f9433ff542b163bf972953b74d3 ] Currently the value written to CP_RB_WPTR is calculated on the fly as (rb->next - rb->start). But as the code is designed rb->next is wrapped before writing the commands so if a series of commands happened to fit perfectly in the ringbuffer, rb->next would end up being equal to rb->size / 4 and thus result in an out of bounds address to CP_RB_WPTR. The easiest way to fix this is to mask WPTR when writing it to the hardware; it makes the hardware happy and the rest of the ringbuffer math appears to work and there isn't any point in upsetting anything. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> [squash in is_power_of_2() check] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06net/mlx4: Remove BUG_ON from ICM allocation routineLeon Romanovsky
[ Upstream commit c1d5f8ff80ea84768f5fae1ca9d1abfbb5e6bbaa ] This patch removes BUG_ON() macro from mlx4_alloc_icm_coherent() by checking DMA address alignment in advance and performing proper folding in case of error. Fixes: 5b0bf5e25efe ("mlx4_core: Support ICM tables in coherent memory") Reported-by: Ozgur Karatas <okaratas@member.fsf.org> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06r8169: add support for RTL8168 series add-on card.Chun-Hao Lin
[ Upstream commit 610c908773d30907c950ca3b2ee8ac4b2813537b ] This chip is the same as RTL8168, but its device id is 0x8161. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06tpm: Replace device number bitmap with IDRStefan Berger
commit 15516788e581eb32ec1c50e5f00aba3faf95d817 upstream. Replace the device number bitmap with IDR. Extend the number of devices we can create to 64k. Since an IDR allows us to associate a pointer with an ID, we use this now to rewrite tpm_chip_find_get() to simply look up the chip pointer by the given device ID. Protect the IDR calls with a mutex. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06tpm: fix a kernel memory leak in tpm-sysfs.cJarkko Sakkinen
commit 13b47cfcfc60495cde216eef4c01040d76174cbe upstream. While cleaning up sysfs callback that prints EK we discovered a kernel memory leak. This commit fixes the issue by zeroing the buffer used for TPM command/response. The leak happen when we use either tpm_vtpm_proxy, tpm_ibmvtpm or xen-tpmfront. Fixes: 0883743825e3 ("TPM: sysfs functions consolidation") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06xen/blkback: don't use xen_blkif_get() in xen-blkback kthreadJuergen Gross
commit a24fa22ce22ae302b3bf8f7008896d52d5d57b8d upstream. There is no need to use xen_blkif_get()/xen_blkif_put() in the kthread of xen-blkback. Thread stopping is synchronous and using the blkif reference counting in the kthread will avoid to ever let the reference count drop to zero at the end of an I/O running concurrent to disconnecting and multiple rings. Setting ring->xenblkd to NULL after stopping the kthread isn't needed as the kthread does this already. Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Steven Haigh <netwiz@crc.id.au> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06xen/blkback: don't free be structure too earlyJuergen Gross
commit 71df1d7ccad1c36f7321d6b3b48f2ea42681c363 upstream. The be structure must not be freed when freeing the blkif structure isn't done. Otherwise a use-after-free of be when unmapping the ring used for communicating with the frontend will occur in case of a late call of xenblk_disconnect() (e.g. due to an I/O still active when trying to disconnect). Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Steven Haigh <netwiz@crc.id.au> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06v4l: s5c73m3: fix negation operatorAndrzej Hajda
commit a2370ba2752538404e363346b339869c9973aeac upstream. Bool values should be negated using logical operators. Using bitwise operators results in unexpected and possibly incorrect results. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06ipmi/watchdog: fix watchdog timeout set on rebootValentin Vidic
commit 860f01e96981a68553f3ca49f574ff14fe955e72 upstream. systemd by default starts watchdog on reboot and sets the timer to ShutdownWatchdogSec=10min. Reboot handler in ipmi_watchdog than reduces the timer to 120s which is not enough time to boot a Xen machine with a lot of RAM. As a result the machine is rebooted the second time during the long run of (XEN) Scrubbing Free RAM..... Fix this by setting the timer to 120s only if it was previously set to a low value. Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06libnvdimm, btt: fix btt_rw_page not returning errorsVishal Verma
commit c13c43d54f2c6a3be1c675766778ac1ad8dfbfcc upstream. btt_rw_page was not propagating errors frm btt_do_bvec, resulting in any IO errors via the rw_page path going unnoticed. the pmem driver recently fixed this in e10624f pmem: fail io-requests to known bad blocks but same problem in BTT went neglected. Fixes: 5212e11fde4d ("nd_btt: atomic sector updates") Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06RDMA/uverbs: Fix the check for port numberIsmail, Mustafa
commit 5a7a88f1b488e4ee49eb3d5b82612d4d9ffdf2c3 upstream. The port number is only valid if IB_QP_PORT is set in the mask. So only check port number if it is valid to prevent modify_qp from failing due to an invalid port number. Fixes: 5ecce4c9b17b("Check port number supplied by user verbs cmds") Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if ↵Sudeep Holla
present commit 975e83cfb8dc16e7a2fdc58188c77c0c605876c2 upstream. If the genpd->attach_dev or genpd->power_on fails, genpd_dev_pm_attach may return -EPROBE_DEFER initially. However genpd_alloc_dev_data sets the PM domain for the device unconditionally. When subsequent attempts are made to call genpd_dev_pm_attach, it may return -EEXISTS checking dev->pm_domain without re-attempting to call attach_dev or power_on. platform_drv_probe then attempts to call drv->probe as the return value -EEXIST != -EPROBE_DEFER, which may end up in a situation where the device is accessed without it's power domain switched on. Fixes: f104e1e5ef57 (PM / Domains: Re-order initialization of generic_pm_domain_data) Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06kaweth: fix oops upon failed memory allocationOliver Neukum
commit 575ced7f8090c1a4e91e2daf8da9352a6a1fc7a7 upstream. Just return an error upon failure. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06kaweth: fix firmware downloadOliver Neukum
commit 60bcabd080f53561efa9288be45c128feda1a8bb upstream. This fixes the oops discovered by the Umap2 project and Alan Stern. The intf member needs to be set before the firmware is downloaded. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06mpt3sas: Don't overreach ioc->reply_post[] during initializationCalvin Owens
commit 5ec8a1753bc29efa7e4b1391d691c9c719b30257 upstream. In _base_make_ioc_operational(), we walk ioc->reply_queue_list and pull a pointer out of successive elements of ioc->reply_post[] for each entry in that list if RDPQ is enabled. Since the code pulls the pointer for the next iteration at the bottom of the loop, it triggers the a KASAN dump on the final iteration: BUG: KASAN: slab-out-of-bounds in _base_make_ioc_operational+0x47b7/0x47e0 [mpt3sas] at addr ffff880754816ab0 Read of size 8 by task modprobe/305 <snip> Call Trace: [<ffffffff81dfc591>] dump_stack+0x4d/0x6c [<ffffffff814c9689>] print_trailer+0xf9/0x150 [<ffffffff814ceda4>] object_err+0x34/0x40 [<ffffffff814d1231>] kasan_report_error+0x221/0x530 [<ffffffff814d1673>] __asan_report_load8_noabort+0x43/0x50 [<ffffffffa0043637>] _base_make_ioc_operational+0x47b7/0x47e0 [mpt3sas] [<ffffffffa0049a51>] mpt3sas_base_attach+0x1991/0x2120 [mpt3sas] [<ffffffffa0053c93>] _scsih_probe+0xeb3/0x16b0 [mpt3sas] [<ffffffff81ebd047>] local_pci_probe+0xc7/0x170 [<ffffffff81ebf2cf>] pci_device_probe+0x20f/0x290 [<ffffffff820d50cd>] really_probe+0x17d/0x600 [<ffffffff820d56a3>] __driver_attach+0x153/0x190 [<ffffffff820cffac>] bus_for_each_dev+0x11c/0x1a0 [<ffffffff820d421d>] driver_attach+0x3d/0x50 [<ffffffff820d378a>] bus_add_driver+0x44a/0x5f0 [<ffffffff820d666c>] driver_register+0x18c/0x3b0 [<ffffffff81ebcb76>] __pci_register_driver+0x156/0x200 [<ffffffffa00c8135>] _mpt3sas_init+0x135/0x1000 [mpt3sas] [<ffffffff81000423>] do_one_initcall+0x113/0x2b0 [<ffffffff813caa5a>] do_init_module+0x1d0/0x4d8 [<ffffffff81273909>] load_module+0x6729/0x8dc0 [<ffffffff81276123>] SYSC_init_module+0x183/0x1a0 [<ffffffff8127625e>] SyS_init_module+0xe/0x10 [<ffffffff828fe7d7>] entry_SYSCALL_64_fastpath+0x12/0x6a Fix this by pulling the value at the beginning of the loop. Signed-off-by: Calvin Owens <calvinowens@fb.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Jens Axboe <axboe@fb.com> Acked-by: Chaitra Basappa <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06mailbox: handle empty message in tx_tickSudeep Holla
commit cb710ab1d8a23f68ff8f45aedf3e552bb90e70de upstream. We already check if the message is empty before calling the client tx_done callback. Calling completion on a wait event is also invalid if the message is empty. This patch moves the existing empty message check earlier. Fixes: 2b6d83e2b8b7 ("mailbox: Introduce framework for mailbox") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06mailbox: skip complete wait event if timer expiredSudeep Holla
commit cc6eeaa3029a6dbcb4ad41b1f92876483bd88965 upstream. If a wait_for_completion_timeout() call returns due to a timeout, complete() can get called after returning from the wait which is incorrect and can cause subsequent transmissions on a channel to fail. Since the wait_for_completion_timeout() sees the completion variable is non-zero caused by the erroneous/spurious complete() call, and it immediately returns without waiting for the time as expected by the client. This patch fixes the issue by skipping complete() call for the timer expiry. Fixes: 2b6d83e2b8b7 ("mailbox: Introduce framework for mailbox") Reported-by: Alexey Klimov <alexey.klimov@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06mailbox: always wait in mbox_send_message for blocking Tx modeSudeep Holla
commit c61b781ee084e69855477d23dd33e7e6caad652c upstream. There exists a race when msg_submit return immediately as there was an active request being processed which may have completed just before it's checked again in mbox_send_message. This will result in return to the caller without waiting in mbox_send_message even when it's blocking Tx. This patch fixes the issue by waiting for the completion always if Tx is in blocking mode. Fixes: 2b6d83e2b8b7 ("mailbox: Introduce framework for mailbox") Reported-by: Alexey Klimov <alexey.klimov@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Alexey Klimov <alexey.klimov@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06wil6210: fix deadlock when using fw_no_recovery optionLior David
commit dfb5b098e0f40b68aa07f2ec55f4dd762efefbfa upstream. When FW crashes with no_fw_recovery option, driver waits for manual recovery with wil->mutex held, this can easily create deadlocks. Fix the problem by moving the wait outside the lock. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06ath10k: fix null deref on wmi-tlv when trying spectral scanMichal Kazior
commit 18ae68fff392e445af3c2d8be9bef8a16e1c72a7 upstream. WMI ops wrappers did not properly check for null function pointers for spectral scan. This caused null dereference crash with WMI-TLV based firmware which doesn't implement spectral scan. The crash could be triggered with: ip link set dev wlan0 up echo background > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl The crash looked like this: [ 168.031989] BUG: unable to handle kernel NULL pointer dereference at (null) [ 168.037406] IP: [< (null)>] (null) [ 168.040395] PGD cdd4067 PUD fa0f067 PMD 0 [ 168.043303] Oops: 0010 [#1] SMP [ 168.045377] Modules linked in: ath10k_pci(O) ath10k_core(O) ath mac80211 cfg80211 [last unloaded: cfg80211] [ 168.051560] CPU: 1 PID: 1380 Comm: bash Tainted: G W O 4.8.0 #78 [ 168.054336] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 168.059183] task: ffff88000c460c00 task.stack: ffff88000d4bc000 [ 168.061736] RIP: 0010:[<0000000000000000>] [< (null)>] (null) ... [ 168.100620] Call Trace: [ 168.101910] [<ffffffffa03b9566>] ? ath10k_spectral_scan_config+0x96/0x200 [ath10k_core] [ 168.104871] [<ffffffff811386e2>] ? filemap_fault+0xb2/0x4a0 [ 168.106696] [<ffffffffa03b97e6>] write_file_spec_scan_ctl+0x116/0x280 [ath10k_core] [ 168.109618] [<ffffffff812da3a1>] full_proxy_write+0x51/0x80 [ 168.111443] [<ffffffff811957b8>] __vfs_write+0x28/0x120 [ 168.113090] [<ffffffff812f1a2d>] ? security_file_permission+0x3d/0xc0 [ 168.114932] [<ffffffff8109b912>] ? percpu_down_read+0x12/0x60 [ 168.116680] [<ffffffff811965f8>] vfs_write+0xb8/0x1a0 [ 168.118293] [<ffffffff81197966>] SyS_write+0x46/0xa0 [ 168.119912] [<ffffffff818f2972>] entry_SYSCALL_64_fastpath+0x1a/0xa4 [ 168.121737] Code: Bad RIP value. [ 168.123318] RIP [< (null)>] (null) Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06isdn/i4l: fix buffer overflowAnnie Cherkaev
commit 9f5af546e6acc30f075828cb58c7f09665033967 upstream. This fixes a potential buffer overflow in isdn_net.c caused by an unbounded strcpy. [ ISDN seems to be effectively unmaintained, and the I4L driver in particular is long deprecated, but in case somebody uses this.. - Linus ] Signed-off-by: Jiten Thakkar <jitenmt@gmail.com> Signed-off-by: Annie Cherkaev <annie.cherk@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06isdn: Fix a sleep-in-atomic bugJia-Ju Bai
commit e8f4ae85439f34bec3b0ab69223a41809dab28c9 upstream. The driver may sleep under a spin lock, the function call path is: isdn_ppp_mp_receive (acquire the lock) isdn_ppp_mp_reassembly isdn_ppp_push_higher isdn_ppp_decompress isdn_ppp_ccp_reset_trans isdn_ppp_ccp_reset_alloc_state kzalloc(GFP_KERNEL) --> may sleep To fixed it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06net: phy: Do not perform software reset for Generic PHYFlorian Fainelli
commit 0878fff1f42c18e448ab5b8b4f6a3eb32365b5b6 upstream. The Generic PHY driver is a catch-all PHY driver and it should preserve whatever prior initialization has been done by boot loader or firmware agents. For specific PHY device configuration it is expected that a specialized PHY driver would take over that role. Resetting the generic PHY was a bad idea that has lead to several complaints and downstream workarounds e.g: in OpenWrt/LEDE so restore the behavior prior to 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()"). Reported-by: Felix Fietkau <nbd@nbd.name> Fixes: 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06nfc: fdp: fix NULL pointer dereferenceSudip Mukherjee
commit b6355fb3f5f40bbce165847d277e64896cab8f95 upstream. We are checking phy after dereferencing it. We can print the debug information after checking it. If phy is NULL then we will get a good stack trace to tell us that we are in this irq handler. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06drm: rcar-du: Simplify and fix probe error handlingLaurent Pinchart
commit 4f7b0d263833928e947e172eff2d2997179c5cb9 upstream. It isn't safe to call drm_dev_unregister() without first initializing mode setting with drm_mode_config_init(). This leads to a crash if either IO memory can't be remapped or vblank initialization fails. Fix this by reordering the initialization sequence. Move vblank initialization after the drm_mode_config_init() call, and move IO remapping before drm_dev_alloc() to avoid the need to perform clean up in case of failure. While at it remove the explicit drm_vblank_cleanup() call from rcar_du_remove() as the drm_dev_unregister() function already cleans up vblank. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: thongsyho <thong.ho.px@rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06drm: rcar-du: Perform initialization/cleanup at probe/remove timeLaurent Pinchart
commit c1d4b38c93069dca6b419a3b88907e01e2c3abf7 upstream. The drm driver .load() operation is prone to race conditions as it initializes the driver after registering the device nodes. Its usage is deprecated, inline it in the probe function and call drm_dev_alloc() and drm_dev_register() explicitly. For consistency inline the .unload() handler in the remove function as well. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06drm/rcar: Nuke preclose hookDaniel Vetter
commit 0a346629f5304a8390004a91e8d4f1206b87792b upstream. Again since the drm core takes care of event unlinking/disarming this is now just needless code. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-10-git-send-email-daniel.vetter@ffwll.ch Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06Staging: comedi: comedi_fops: Avoid orphaned proc entryCheah Kok Cheong
commit bf279ece37d2a3eaaa9813fcd7a1d8a81eb29c20 upstream. Move comedi_proc_init to the end to avoid orphaned proc entry if module loading failed. Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06drm/nouveau/bar/gf100: fix access to upper half of BAR2Ben Skeggs
commit 38bcb208f60924a031b9f809f7cd252ea4a94e5f upstream. Bit 30 being set causes the upper half of BAR2 to stay in physical mode, mapped over the end of VRAM, even when the rest of the BAR has been set to virtual mode. We inherited our initial value from RM, but I'm not aware of any reason we need to keep it that way. This fixes severe GPU hang/lockup issues revealed by Wayland on F26. Shout-out to NVIDIA for the quick response with the potential cause! Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06drm/vmwgfx: Fix gcc-7.1.1 warningSinclair Yeh
commit fcfffdd8f98ac305285dca568b5065ef86be6458 upstream. The current code does not look correct, and the reason for it is probably lost. Since this now generates a compiler warning, fix it to what makes sense. Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06md/raid5: add thread_group worker async_tx_issue_pending_allOfer Heifetz
commit 7e96d559634b73a8158ee99a7abece2eacec2668 upstream. Since thread_group worker and raid5d kthread are not in sync, if worker writes stripe before raid5d then requests will be waiting for issue_pendig. Issue observed when building raid5 with ext4, in some build runs jbd2 would get hung and requests were waiting in the HW engine waiting to be issued. Fix this by adding a call to async_tx_issue_pending_all in the raid5_do_work. Signed-off-by: Ofer Heifetz <oferh@marvell.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27spmi: Include OF based modalias in device ueventBjorn Andersson
commit d50daa2af2618dab6d21634e65a5fbcf4ae437d6 upstream. Include the OF-based modalias in the uevent sent when registering SPMI devices, so that user space has a chance to autoload the kernel module for the device. Tested-by: Rob Clark <robdclark@gmail.com> Reported-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27of: device: Export of_device_{get_modalias, uvent_modalias} to modulesStephen Boyd
commit 7a3b7cd332db08546f3cdd984f11773e0d1999e7 upstream. The ULPI bus can be built as a module, and it will soon be calling these functions when it supports probing devices from DT. Export them so they can be used by the ULPI module. Acked-by: Rob Herring <robh@kernel.org> Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27drm/mst: Avoid processing partially received up/down message transactionsImre Deak
commit 636c4c3e762b62aa93632c645ca65879285b16e3 upstream. Currently we may process up/down message transactions containing uninitialized data. This can happen if there was an error during the reception of any message in the transaction, but we happened to receive the last message correctly with the end-of-message flag set. To avoid this abort the reception of the transaction when the first error is detected, rejecting any messages until a message with the start-of-message flag is received (which will start a new transaction). This is also what the DP 1.4 spec 2.11.8.2 calls for in this case. In addtion this also prevents receiving bogus transactions without the first message with the the start-of-message flag set. v2: - unchanged v3: - git add the part that actually skips messages after an error in drm_dp_sideband_msg_build() Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude <lyude@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170719134632.13366-1-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req()Imre Deak
commit 7f8b3987da54cb4d41ad2545cd4d7958b9a36bdf upstream. In case of an unknown broadcast message is sent mstb will remain unset, so check for this. Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude <lyude@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170719114330.26540-3-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27drm/mst: Fix error handling during MST sideband message receptionImre Deak
commit 448421b5e93b9177c5698f0cf6f5e72d2995eeca upstream. Handle any error due to partial reads, timeouts etc. to avoid parsing uninitialized data subsequently. Also bail out if the parsing itself fails. Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude <lyude@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170719114330.26540-2-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27RDMA/core: Initialize port_num in qp_attrIsmail, Mustafa
commit a62ab66b13a0f9bcb17b7b761f6670941ed5cd62 upstream. Initialize the port_num for iWARP in rdma_init_qp_attr. Fixes: 5ecce4c9b17b("Check port number supplied by user verbs cmds") Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27staging: rtl8188eu: add TL-WN722N v2 supportMichael Gugino
commit 5a1d4c5dd4eb2f1f8a9b30e61762f3b3b564df70 upstream. Add support for USB Device TP-Link TL-WN722N v2. VendorID: 0x2357, ProductID: 0x010c Signed-off-by: Michael Gugino <michael.gugino.2@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27target: Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesceJiang Yi
commit 1d6ef276594a781686058802996e09c8550fd767 upstream. This patch addresses a COMPARE_AND_WRITE se_device->caw_sem leak, that would be triggered during normal se_cmd shutdown or abort via __transport_wait_for_tasks(). This would occur because target_complete_cmd() would catch this early and do complete_all(&cmd->t_transport_stop_comp), but since target_complete_ok_work() or target_complete_failure_work() are never called to invoke se_cmd->transport_complete_callback(), the COMPARE_AND_WRITE specific callbacks never release caw_sem. To address this special case, go ahead and release caw_sem directly from target_complete_cmd(). (Remove '&& success' from check, to release caw_sem regardless of scsi_status - nab) Signed-off-by: Jiang Yi <jiangyilism@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27Input: i8042 - fix crash at boot timeChen Hong
commit 340d394a789518018f834ff70f7534fc463d3226 upstream. The driver checks port->exists twice in i8042_interrupt(), first when trying to assign temporary "serio" variable, and second time when deciding whether it should call serio_interrupt(). The value of port->exists may change between the 2 checks, and we may end up calling serio_interrupt() with a NULL pointer: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 IP: [<ffffffff8150feaf>] _spin_lock_irqsave+0x1f/0x40 PGD 0 Oops: 0002 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.32-358.el6.x86_64 #1 QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:[<ffffffff8150feaf>] [<ffffffff8150feaf>] _spin_lock_irqsave+0x1f/0x40 RSP: 0018:ffff880028203cc0 EFLAGS: 00010082 RAX: 0000000000010000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000282 RSI: 0000000000000098 RDI: 0000000000000050 RBP: ffff880028203cc0 R08: ffff88013e79c000 R09: ffff880028203ee0 R10: 0000000000000298 R11: 0000000000000282 R12: 0000000000000050 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000098 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000050 CR3: 0000000001a85000 CR4: 00000000001407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff88013e79c000, task ffff88013e79b500) Stack: ffff880028203d00 ffffffff813de186 ffffffffffffff02 0000000000000000 <d> 0000000000000000 0000000000000000 0000000000000000 0000000000000098 <d> ffff880028203d70 ffffffff813e0162 ffff880028203d20 ffffffff8103b8ac Call Trace: <IRQ> [<ffffffff813de186>] serio_interrupt+0x36/0xa0 [<ffffffff813e0162>] i8042_interrupt+0x132/0x3a0 [<ffffffff8103b8ac>] ? kvm_clock_read+0x1c/0x20 [<ffffffff8103b8b9>] ? kvm_clock_get_cycles+0x9/0x10 [<ffffffff810e1640>] handle_IRQ_event+0x60/0x170 [<ffffffff8103b154>] ? kvm_guest_apic_eoi_write+0x44/0x50 [<ffffffff810e3d8e>] handle_edge_irq+0xde/0x180 [<ffffffff8100de89>] handle_irq+0x49/0xa0 [<ffffffff81516c8c>] do_IRQ+0x6c/0xf0 [<ffffffff8100b9d3>] ret_from_intr+0x0/0x11 [<ffffffff81076f63>] ? __do_softirq+0x73/0x1e0 [<ffffffff8109b75b>] ? hrtimer_interrupt+0x14b/0x260 [<ffffffff8100c1cc>] ? call_softirq+0x1c/0x30 [<ffffffff8100de05>] ? do_softirq+0x65/0xa0 [<ffffffff81076d95>] ? irq_exit+0x85/0x90 [<ffffffff81516d80>] ? smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8100bb93>] ? apic_timer_interrupt+0x13/0x20 To avoid the issue let's change the second check to test whether serio is NULL or not. Also, let's take i8042_lock in i8042_start() and i8042_stop() instead of trying to be overly smart and using memory barriers. Signed-off-by: Chen Hong <chenhong3@huawei.com> [dtor: take lock in i8042_start()/i8042_stop()] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27vfio: New external user group/file matchAlex Williamson
commit 5d6dee80a1e94cc284d03e06d930e60e8d3ecf7d upstream. At the point where the kvm-vfio pseudo device wants to release its vfio group reference, we can't always acquire a new reference to make that happen. The group can be in a state where we wouldn't allow a new reference to be added. This new helper function allows a caller to match a file to a group to facilitate this. Given a file and group, report if they match. Thus the caller needs to already have a group reference to match to the file. This allows the deletion of a group without acquiring a new reference. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27vfio: Fix group release deadlockAlex Williamson
commit 811642d8d8a82c0cce8dc2debfdaf23c5a144839 upstream. If vfio_iommu_group_notifier() acquires a group reference and that reference becomes the last reference to the group, then vfio_group_put introduces a deadlock code path where we're trying to unregister from the iommu notifier chain from within a callout of that chain. Use a work_struct to release this reference asynchronously. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27ipmi:ssif: Add missing unlock in error branchCorey Minyard
commit 4495ec6d770e1bca7a04e93ac453ab6720c56c5d upstream. When getting flags, a response to a different message would result in a deadlock because of a missing unlock. Add that unlock and a comment. Found by static analysis. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27ipmi: use rcu lock around call to intf->handlers->sender()Tony Camuso
commit cdea46566bb21ce309725a024208322a409055cc upstream. A vendor with a system having more than 128 CPUs occasionally encounters the following crash during shutdown. This is not an easily reproduceable event, but the vendor was able to provide the following analysis of the crash, which exhibits the same footprint each time. crash> bt PID: 0 TASK: ffff88017c70ce70 CPU: 5 COMMAND: "swapper/5" #0 [ffff88085c143ac8] machine_kexec at ffffffff81059c8b #1 [ffff88085c143b28] __crash_kexec at ffffffff811052e2 #2 [ffff88085c143bf8] crash_kexec at ffffffff811053d0 #3 [ffff88085c143c10] oops_end at ffffffff8168ef88 #4 [ffff88085c143c38] no_context at ffffffff8167ebb3 #5 [ffff88085c143c88] __bad_area_nosemaphore at ffffffff8167ec49 #6 [ffff88085c143cd0] bad_area_nosemaphore at ffffffff8167edb3 #7 [ffff88085c143ce0] __do_page_fault at ffffffff81691d1e #8 [ffff88085c143d40] do_page_fault at ffffffff81691ec5 #9 [ffff88085c143d70] page_fault at ffffffff8168e188 [exception RIP: unknown or invalid address] RIP: ffffffffa053c800 RSP: ffff88085c143e28 RFLAGS: 00010206 RAX: ffff88017c72bfd8 RBX: ffff88017a8dc000 RCX: ffff8810588b5ac8 RDX: ffff8810588b5a00 RSI: ffffffffa053c800 RDI: ffff8810588b5a00 RBP: ffff88085c143e58 R8: ffff88017c70d408 R9: ffff88017a8dc000 R10: 0000000000000002 R11: ffff88085c143da0 R12: ffff8810588b5ac8 R13: 0000000000000100 R14: ffffffffa053c800 R15: ffff8810588b5a00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <IRQ stack> [exception RIP: cpuidle_enter_state+82] RIP: ffffffff81514192 RSP: ffff88017c72be50 RFLAGS: 00000202 RAX: 0000001e4c3c6f16 RBX: 000000000000f8a0 RCX: 0000000000000018 RDX: 0000000225c17d03 RSI: ffff88017c72bfd8 RDI: 0000001e4c3c6f16 RBP: ffff88017c72be78 R8: 000000000000237e R9: 0000000000000018 R10: 0000000000002494 R11: 0000000000000001 R12: ffff88017c72be20 R13: ffff88085c14f8e0 R14: 0000000000000082 R15: 0000001e4c3bb400 ORIG_RAX: ffffffffffffff10 CS: 0010 SS: 0018 This is the corresponding stack trace It has crashed because the area pointed with RIP extracted from timer element is already removed during a shutdown process. The function is smi_timeout(). And we think ffff8810588b5a00 in RDX is a parameter struct smi_info crash> rd ffff8810588b5a00 20 ffff8810588b5a00: ffff8810588b6000 0000000000000000 .`.X............ ffff8810588b5a10: ffff880853264400 ffffffffa05417e0 .D&S......T..... ffff8810588b5a20: 24a024a000000000 0000000000000000 .....$.$........ ffff8810588b5a30: 0000000000000000 0000000000000000 ................ ffff8810588b5a30: 0000000000000000 0000000000000000 ................ ffff8810588b5a40: ffffffffa053a040 ffffffffa053a060 @.S.....`.S..... ffff8810588b5a50: 0000000000000000 0000000100000001 ................ ffff8810588b5a60: 0000000000000000 0000000000000e00 ................ ffff8810588b5a70: ffffffffa053a580 ffffffffa053a6e0 ..S.......S..... ffff8810588b5a80: ffffffffa053a4a0 ffffffffa053a250 ..S.....P.S..... ffff8810588b5a90: 0000000500000002 0000000000000000 ................ Unfortunately the top of this area is already detroyed by someone. But because of two reasonns we think this is struct smi_info 1) The address included in between ffff8810588b5a70 and ffff8810588b5a80: are inside of ipmi_si_intf.c see crash> module ffff88085779d2c0 2) We've found the area which point this. It is offset 0x68 of ffff880859df4000 crash> rd ffff880859df4000 100 ffff880859df4000: 0000000000000000 0000000000000001 ................ ffff880859df4010: ffffffffa0535290 dead000000000200 .RS............. ffff880859df4020: ffff880859df4020 ffff880859df4020 @.Y.... @.Y.... ffff880859df4030: 0000000000000002 0000000000100010 ................ ffff880859df4040: ffff880859df4040 ffff880859df4040 @@.Y....@@.Y.... ffff880859df4050: 0000000000000000 0000000000000000 ................ ffff880859df4060: 0000000000000000 ffff8810588b5a00 .........Z.X.... ffff880859df4070: 0000000000000001 ffff880859df4078 ........x@.Y.... If we regards it as struct ipmi_smi in shutdown process it looks consistent. The remedy for this apparent race is affixed below. Signed-off-by: Tony Camuso <tcamuso@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> This was first introduced in 7ea0ed2b5be817 ipmi: Make the message handler easier to use for SMI interfaces where some code was moved outside of the rcu_read_lock() and the lock was not added. Signed-off-by: Corey Minyard <cminyard@mvista.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 04:38:00 +0000